Bump version

* Add rsync to docker.

Add rsync to docker.
Rsync is nearly a necessity to optimize backup inside Openshift container.
Using TAR (default without Rsync), the process of external backup constantly stops at the middle.

* Add rsync to docker

Add rsync to docker.
Rsync is nearly a necessity to optimize backup inside Openshift container.
Using TAR (default without Rsync), the process of external backup constantly stops at the middle.

* Add rsync to docker

Add rsync to docker.
Rsync is nearly a necessity to optimize backup inside Openshift container.
Using TAR (default without Rsync), the process of external backup constantly stops at the middle.

* Add rsync to docker

Add rsync to docker.
Rsync is nearly a necessity to optimize backup inside Openshift container.
Using TAR (default without Rsync), the process of external backup constantly stops at the middle.

.bra.toml

@@ -8,11 +8,13 @@ watch_dirs = [
 	"$WORKDIR/cmd",
 	"$WORKDIR/models",
 	"$WORKDIR/pkg",
-	"$WORKDIR/routers"
+	"$WORKDIR/routes"
 ]
 watch_exts = [".go"]
 ignore_files = [".+_test.go"]
 build_delay = 1500
+interrupt_timout = 1
+graceful_kill = true
 cmds = [
 	["make", "build-dev"], # TAGS=sqlite cert pam tidb
 	["./gogs", "web"]

.dockerignore

@@ -1,5 +1,3 @@
-.git
-.git/**
 packager
 packager/**
 scripts

.gitattributes

@@ -4,7 +4,7 @@ public/assets/* linguist-vendored
 public/plugins/* linguist-vendored
 public/css/themes/* linguist-vendored
 public/css/github.min.css linguist-vendored
-public/css/semantic-2.2.10.min.css linguist-vendored
+public/css/semantic-2.3.1.min.css linguist-vendored
 public/js/libs/* linguist-vendored
 public/js/jquery-1.11.3.min.js linguist-vendored
-public/js/semantic-2.2.10.min.js linguist-vendored
+public/js/semantic-2.3.1.min.js linguist-vendored

.github/CONTRIBUTING.md

@@ -15,26 +15,7 @@ Depends on the situation, you will:
 
 ### Bug Report
 
-If you find something you consider a bug, please create a issue on [GitHub](https://github.com/gogits/gogs/issues). To avoid wasting time and reduce back-and-forth communication with team members, please include at least the following information in a form comfortable for you:
-
-- Bug Description
-- Gogs Version
-- Git Version
-- System Type
-- Error Log
-- Other information
-
-Please take a moment to check that an issue on [GitHub](https://github.com/gogits/gogs/issues) doesn't already exist documenting your bug report or improvement proposal. If it does, it never hurts to add a quick "+1" or "I have this problem too". This will help prioritize the most common problems and requests.
-
-#### Bug Report Example
-
-Gogs crashed when creating a repository with a license, using v0.5.13.0207, SQLite3, Git 1.9.0, Ubuntu 12.04.
-
-Error log:
-
-```
-2014/09/01 07:21:49 [E] nil pointer
-```
+If you find something you consider a bug, please create an issue on [GitHub](https://github.com/gogits/gogs/issues). To avoid wasting time and reduce back-and-forth communication with team members, please be respect to [Issue Template](ISSUE_TEMPLATE.md).
 
 ### Feature Request
 

.github/ISSUE_TEMPLATE.md

@@ -1,7 +1,8 @@
 The issue will be closed without any reasons if it does not satisfy any of following requirements:
 
-1. Please speak English, we have forum in [Chinese](https://discuss.gogs.io/c/getting-help/getting-help-chinese).
+1. Please speak English, we have forum in [中文](https://discuss.gogs.io/c/getting-help/getting-help-chinese).
 2. Please post questions or config/deploy problems on our forum: https://discuss.gogs.io, here are bugs and feature requests only.
+3. Please do not end your title with a question mark or period.
 3. Please take a moment to search that an issue doesn't already exist.
 4. Please give all relevant information below for bug reports; incomplete details considered invalid report.
 
@@ -16,9 +17,8 @@ The issue will be closed without any reasons if it does not satisfy any of follo
   - [ ] MSSQL
   - [ ] SQLite
 - Can you reproduce the bug at https://try.gogs.io:
-  - [ ] Yes (provide example URL)
-  - [ ] No
-  - [ ] Not relevant
+  - [ ] Yes: provide example URL
+  - [ ] No: explain why
 - Log gist (usually found in `log/gogs.log`):
 
 ## Description

.github/ISSUE_TEMPLATE/bug_report.md

@@ -0,0 +1,50 @@
+---
+name: Bug report
+about: Create a report to help us improve
+
+---
+
+First of all, read https://www.chiark.greenend.org.uk/~sgtatham/bugs.html.
+
+If you don't want to read, it's up to you. But don't waste your time continue reporting.
+
+The issue will be closed without any explanation if it does not satisfy any of following requirements:
+
+1. Please speak English, we have forum in [中文](https://discuss.gogs.io/c/getting-help/getting-help-chinese).
+2. Please post questions or config/deploy problems on our forum: https://discuss.gogs.io, here are bugs and feature requests only.
+3. Please do not end your title with a question mark or period.
+3. Please take a moment to search that an issue doesn't already exist.
+4. Please give all relevant information below for bug reports; incomplete details considered invalid report.
+
+**You MUST delete above content including this line before posting; too lazy to take this action considered invalid report.**
+
+**Describe the bug**
+A clear and concise description of what the bug is.
+
+**To Reproduce**
+Steps to reproduce the behavior:
+1. Go to '...'
+2. Click on '....'
+3. Scroll down to '....'
+4. See error
+
+**Expected behavior**
+A clear and concise description of what you expected to happen.
+
+**Screenshots**
+If applicable, add screenshots to help explain your problem.
+
+**Additional context**
+
+- Gogs version (or commit ref): 
+- Git version: 
+- Operating system: 
+- Database (replace `[ ]` with `[x]`):
+  - [ ] PostgreSQL
+  - [ ] MySQL
+  - [ ] MSSQL
+  - [ ] SQLite
+- Can you reproduce the bug at https://try.gogs.io:
+  - [ ] Yes: provide example URL
+  - [ ] No: explain why
+- Log gist (usually found in `log/gogs.log`):

.github/ISSUE_TEMPLATE/feature_request.md

@@ -0,0 +1,26 @@
+---
+name: Feature request
+about: Suggest an idea for this project
+
+---
+
+The issue will be closed without any explanation if it does not satisfy any of following requirements:
+
+1. Please speak English, we have forum in [中文](https://discuss.gogs.io/c/getting-help/getting-help-chinese).
+2. Please post questions or config/deploy problems on our forum: https://discuss.gogs.io, here are bugs and feature requests only.
+3. Please do not end your title with a question mark or period.
+4. Please take a moment to search that an issue doesn't already exist.
+
+**You MUST delete above content including this line before posting; too lazy to take this action considered invalid report.**
+
+**Is your feature request related to a problem? Please describe.**
+A clear and concise description of what the problem is. Ex. I'm always frustrated when [...]
+
+**Describe the solution you'd like**
+A clear and concise description of what you want to happen.
+
+**Describe alternatives you've considered**
+A clear and concise description of any alternative solutions or features you've considered.
+
+**Additional context**
+Add any other context or screenshots about the feature request here.

.gopmfile

@@ -1,64 +0,0 @@
-[target]
-path = github.com/gogits/gogs
-
-[deps]
-github.com/bradfitz/gomemcache = commit:2fafb84
-github.com/urfave/cli = commit:347a988
-github.com/go-macaron/binding = commit:4892016
-github.com/go-macaron/cache = commit:5617353
-github.com/go-macaron/captcha = commit:8aa5919
-github.com/go-macaron/csrf = commit:6a9a7df
-github.com/go-macaron/gzip = commit:cad1c65
-github.com/go-macaron/i18n = commit:ef57533
-github.com/go-macaron/inject = commit:d8a0b86
-github.com/go-macaron/session = commit:66031fc
-github.com/go-macaron/toolbox = commit:82b5115
-github.com/go-sql-driver/mysql = commit:2e00b5c
-github.com/go-xorm/builder = commit:9c35786
-github.com/go-xorm/core = commit:7daacb2
-github.com/go-xorm/xorm = commit:19f6dfc
-github.com/gogits/chardet = commit:2404f77
-github.com/gogits/cron = commit:2fc07a4
-github.com/gogits/git-module = commit:1b9552b
-github.com/gogits/go-gogs-client = commit:264a3d5
-github.com/gogits/go-libravatar = commit:cd1abbd
-github.com/issue9/identicon = commit:d36b545
-github.com/jaytaylor/html2text = commit:d16d412
-github.com/kardianos/minwinsvc = commit:cad6b2b
-github.com/klauspost/compress = commit:461e8fd
-github.com/klauspost/cpuid = commit:09cded8
-github.com/klauspost/crc32 = commit:cb6bfca
-github.com/lib/pq = commit:67c3f2a
-github.com/mattn/go-colorable = commit:d228849
-github.com/mattn/go-isatty = commit:30a891c
-github.com/mattn/go-sqlite3 = commit:ce9149a
-github.com/mcuadros/go-version = commit:257f7b9
-github.com/microcosm-cc/bluemonday = commit:e797637
-github.com/msteinert/pam = commit:02ccfbf
-github.com/nfnt/resize = commit:891127d
-github.com/russross/blackfriday = commit:5f33e7b
-github.com/satori/go.uuid = commit:b061729
-github.com/sergi/go-diff = commit:24e2351
-github.com/shurcooL/sanitized_anchor_name = commit:1dba4b3
-github.com/Unknwon/cae = commit:c6aac99
-github.com/Unknwon/com = commit:28b053d
-github.com/Unknwon/i18n = commit:e0eb0ce
-github.com/Unknwon/paginater = commit:701c23f
-github.com/fatih/color = commit:42c364b
-golang.org/x/crypto = commit:dc137be
-golang.org/x/net = commit:f249948
-golang.org/x/sys = commit:d75a526
-golang.org/x/text = commit:ece019d
-gopkg.in/alexcesaro/quotedprintable.v3 = commit:2caba25
-gopkg.in/asn1-ber.v1 = commit:4e86f43
-gopkg.in/bufio.v1 = commit:567b2bf
-gopkg.in/clog.v1 = commit:bf4bf4a
-gopkg.in/editorconfig/editorconfig-core-go.v1 = commit:a872f05
-gopkg.in/gomail.v2 = commit:81ebce5
-gopkg.in/ini.v1 = commit:e3c2d47
-gopkg.in/ldap.v2 = commit:8168ee0
-gopkg.in/macaron.v1 = commit:8be5635
-gopkg.in/redis.v2 = commit:e617904
-
-[res]
-include = public|scripts|templates

.pkgr.yml

@@ -1,13 +1,13 @@
 targets:
-  debian-7: &debian
+  debian-8: &debian
     build_dependencies:
       - libpam0g-dev
     dependencies:
       - libpam0g
       - git
-  debian-8:
+  debian-9:
     <<: *debian
-  ubuntu-12.04:
+  debian-10:
     <<: *debian
   ubuntu-14.04:
     <<: *debian
@@ -16,6 +16,8 @@ targets:
     build_dependencies:
       - bzr
       - mercurial
+  ubuntu-18.04:
+    <<: *debian
   centos-6: &el
     build_dependencies:
       - pam-devel
@@ -31,4 +33,7 @@ before:
 after:
   - mv bin/gogs gogs
 after_install: ./packager/hooks/postinst
-buildpack: https://github.com/heroku/heroku-buildpack-go.git#v62
+# Can be updated after CentOS 6 support is dropped, otherwise fails with
+# `fatal: bad config file line 2 in /home/pkgr/.gitconfig` because of
+# https://github.com/heroku/heroku-buildpack-go/blob/f96ebebfa7605fd3916521e42ab050c81c9b947a/lib/common.sh#L238
+buildpack: https://github.com/heroku/heroku-buildpack-go.git#v76

.travis.yml

@@ -1,17 +1,15 @@
 language: go
 go:
-  - 1.6
-  - 1.7
-  - 1.8
-  - master
+  - 1.8.x
+  - 1.9.x
+  - 1.10.x
+  - 1.11.x
+  - 1.12.x
 
 before_install:
   - sudo apt-get update -qq
   - sudo apt-get install -y libpam-dev
 
-env:
-  - GO15VENDOREXPERIMENT=1
-
-script: 
+script:
   - go build -v -tags "pam"
   - go test -v -cover -race ./...

Dockerfile

@@ -1,22 +1,41 @@
-FROM alpine:3.5
+FROM golang:alpine AS binarybuilder
+# Install build deps
+RUN apk --no-cache --no-progress add --virtual build-deps build-base git linux-pam-dev
+WORKDIR /go/src/github.com/gogs/gogs
+COPY . .
+RUN make build TAGS="sqlite cert pam"
 
+FROM alpine:latest
 # Install system utils & Gogs runtime dependencies
-ADD https://github.com/tianon/gosu/releases/download/1.9/gosu-amd64 /usr/sbin/gosu
+ADD https://github.com/tianon/gosu/releases/download/1.10/gosu-amd64 /usr/sbin/gosu
 RUN chmod +x /usr/sbin/gosu \
- && apk --no-cache --no-progress add ca-certificates bash git linux-pam s6 curl openssh socat tzdata
+  && echo http://dl-2.alpinelinux.org/alpine/edge/community/ >> /etc/apk/repositories \
+  && apk --no-cache --no-progress add \
+    bash \
+    ca-certificates \
+    curl \
+    git \
+    linux-pam \
+    openssh \
+    s6 \
+    shadow \
+    socat \
+    tzdata \
+    rsync
 
 ENV GOGS_CUSTOM /data/gogs
 
-COPY . /app/gogs/build
-WORKDIR /app/gogs/build
-
-RUN    ./docker/build-go.sh \
-    && ./docker/build.sh \
-    && ./docker/finalize.sh
-
 # Configure LibC Name Service
 COPY docker/nsswitch.conf /etc/nsswitch.conf
 
+WORKDIR /app/gogs
+COPY docker ./docker
+COPY templates ./templates
+COPY public ./public
+COPY --from=binarybuilder /go/src/github.com/gogs/gogs/gogs .
+
+RUN ./docker/finalize.sh
+
 # Configure Docker Container
 VOLUME ["/data"]
 EXPOSE 22 3000

Dockerfile.aarch64

@@ -1,22 +1,37 @@
-FROM aarch64/alpine:3.5
+FROM arm64v8/alpine:latest
 
 # Install system utils & Gogs runtime dependencies
 ADD https://github.com/tianon/gosu/releases/download/1.9/gosu-arm64 /usr/sbin/gosu
 RUN chmod +x /usr/sbin/gosu \
- && apk --no-cache --no-progress add ca-certificates bash git linux-pam s6 curl openssh socat tzdata
+  && echo http://dl-2.alpinelinux.org/alpine/edge/community/ >> /etc/apk/repositories \
+  && apk --no-cache --no-progress add \
+    bash \
+    ca-certificates \
+    curl \
+    git \
+    linux-pam \
+    openssh \
+    s6 \
+    shadow \
+    socat \
+    tzdata \
+    rsync
 
 ENV GOGS_CUSTOM /data/gogs
 
-COPY . /app/gogs/build
+# Configure LibC Name Service
+COPY docker/nsswitch.conf /etc/nsswitch.conf
+COPY docker /app/gogs/docker
+COPY templates /app/gogs/templates
+COPY public /app/gogs/public
+
 WORKDIR /app/gogs/build
+COPY . .
 
 RUN    ./docker/build-go.sh \
     && ./docker/build.sh \
     && ./docker/finalize.sh
 
-# Configure LibC Name Service
-COPY docker/nsswitch.conf /etc/nsswitch.conf
-
 # Configure Docker Container
 VOLUME ["/data"]
 EXPOSE 22 3000

Dockerfile.aarch64hub

@@ -0,0 +1,48 @@
+FROM arm64v8/alpine:latest
+
+ENV GOGS_CUSTOM /data/gogs
+ENV QEMU_EXECVE 1
+
+# For cross compile on dockerhub
+################################
+
+COPY ./docker/aarch64/qemu-aarch64-static /usr/bin/
+COPY ./docker/aarch64/resin-xbuild /usr/bin/
+
+RUN [ "/usr/bin/qemu-aarch64-static", "/bin/sh", "-c", "ln -s resin-xbuild /usr/bin/cross-build-start; ln -s resin-xbuild /usr/bin/cross-build-end; ln /bin/sh /bin/sh.real" ]
+
+RUN [ "cross-build-start" ]
+
+# Prepare the container
+#######################
+
+# Install system utils & Gogs runtime dependencies
+ADD https://github.com/tianon/gosu/releases/download/1.10/gosu-arm64 /usr/sbin/gosu
+RUN chmod +x /usr/sbin/gosu \
+ && apk --no-cache --no-progress add ca-certificates bash git linux-pam s6 curl openssh shadow socat tzdata go=1.10.1-r0
+
+
+
+COPY docker /app/gogs/docker
+COPY templates /app/gogs/templates
+COPY public /app/gogs/public
+WORKDIR /app/gogs/build
+COPY . .
+
+RUN    ./docker/build.sh \
+    && ./docker/finalize.sh
+
+# Configure LibC Name Service
+COPY docker/nsswitch.conf /etc/nsswitch.conf
+
+# For cross compile on dockerhub
+################################
+
+RUN [ "cross-build-end" ]
+
+# Configure Docker Container
+############################
+VOLUME ["/data"]
+EXPOSE 22 3000
+ENTRYPOINT ["/app/gogs/docker/start.sh"]
+CMD ["/bin/s6-svscan", "/app/gogs/docker/s6/"]

Dockerfile.rpi

@@ -1,22 +1,37 @@
-FROM armhf/alpine:3.5
+FROM arm32v7/alpine:latest
 
 # Install system utils & Gogs runtime dependencies
 ADD https://github.com/tianon/gosu/releases/download/1.9/gosu-armhf /usr/sbin/gosu
 RUN chmod +x /usr/sbin/gosu \
- && apk --no-cache --no-progress add ca-certificates bash git linux-pam s6 curl openssh socat tzdata
+  && echo http://dl-2.alpinelinux.org/alpine/edge/community/ >> /etc/apk/repositories \
+  && apk --no-cache --no-progress add \
+    bash \
+    ca-certificates \
+    curl \
+    git \
+    linux-pam \
+    openssh \
+    s6 \
+    shadow \
+    socat \
+    tzdata \
+    rsync
 
 ENV GOGS_CUSTOM /data/gogs
 
-COPY . /app/gogs/build
+# Configure LibC Name Service
+COPY docker/nsswitch.conf /etc/nsswitch.conf
+COPY docker /app/gogs/docker
+COPY templates /app/gogs/templates
+COPY public /app/gogs/public
+
 WORKDIR /app/gogs/build
+COPY . .
 
 RUN    ./docker/build-go.sh \
     && ./docker/build.sh \
     && ./docker/finalize.sh
 
-# Configure LibC Name Service
-COPY docker/nsswitch.conf /etc/nsswitch.conf
-
 # Configure Docker Container
 VOLUME ["/data"]
 EXPOSE 22 3000

Dockerfile.rpihub

@@ -0,0 +1,59 @@
+FROM arm32v7/alpine:latest
+
+ENV GOGS_CUSTOM /data/gogs
+ENV QEMU_EXECVE 1
+
+# For cross compile on dockerhub
+################################
+
+COPY ./docker/armhf/qemu-arm-static /usr/bin/
+COPY ./docker/armhf/resin-xbuild /usr/bin/
+
+RUN [ "/usr/bin/qemu-arm-static", "/bin/sh", "-c", "ln -s resin-xbuild /usr/bin/cross-build-start; ln -s resin-xbuild /usr/bin/cross-build-end; ln /bin/sh /bin/sh.real" ]
+
+RUN [ "cross-build-start" ]
+
+# Prepare the container
+#######################
+
+# Install system utils & Gogs runtime dependencies
+ADD https://github.com/tianon/gosu/releases/download/1.9/gosu-armhf /usr/sbin/gosu
+RUN chmod +x /usr/sbin/gosu \
+  && echo http://dl-2.alpinelinux.org/alpine/edge/community/ >> /etc/apk/repositories \
+  && apk --no-cache --no-progress add \
+    bash \
+    ca-certificates \
+    curl \
+    git \
+    linux-pam \
+    openssh \
+    s6 \
+    shadow \
+    socat \
+    tzdata \
+    rsync
+
+# Configure LibC Name Service
+COPY docker/nsswitch.conf /etc/nsswitch.conf
+COPY docker /app/gogs/docker
+COPY templates /app/gogs/templates
+COPY public /app/gogs/public
+
+WORKDIR /app/gogs/build
+COPY . .
+
+RUN    ./docker/build-go.sh \
+    && ./docker/build.sh \
+    && ./docker/finalize.sh
+
+# For cross compile on dockerhub
+################################
+
+RUN [ "cross-build-end" ]
+
+# Configure Docker Container
+############################
+VOLUME ["/data"]
+EXPOSE 22 3000
+ENTRYPOINT ["/app/gogs/docker/start.sh"]
+CMD ["/bin/s6-svscan", "/app/gogs/docker/s6/"]

Makefile

@@ -1,5 +1,5 @@
-LDFLAGS += -X "github.com/gogits/gogs/pkg/setting.BuildTime=$(shell date -u '+%Y-%m-%d %I:%M:%S %Z')"
-LDFLAGS += -X "github.com/gogits/gogs/pkg/setting.BuildGitHash=$(shell git rev-parse HEAD)"
+LDFLAGS += -X "github.com/gogs/gogs/pkg/setting.BuildTime=$(shell date -u '+%Y-%m-%d %I:%M:%S %Z')"
+LDFLAGS += -X "github.com/gogs/gogs/pkg/setting.BuildGitHash=$(shell git rev-parse HEAD)"
 
 DATA_FILES := $(shell find conf | sed 's/ /\\ /g')
 LESS_FILES := $(wildcard public/less/gogs.less public/less/_*.less)
@@ -30,7 +30,7 @@ web: build
 
 govet:
 	$(GOVET) gogs.go
-	$(GOVET) models pkg routers
+	$(GOVET) models pkg routes
 
 build: $(GENERATED)
 	go install $(BUILD_FLAGS) -ldflags '$(LDFLAGS)' -tags '$(TAGS)'
@@ -56,12 +56,12 @@ release: build pack
 bindata: pkg/bindata/bindata.go
 
 pkg/bindata/bindata.go: $(DATA_FILES)
-	go-bindata -o=$@ -ignore="\\.DS_Store|README.md|TRANSLATORS" -pkg=bindata conf/...
+	go-bindata -o=$@ -ignore="\\.DS_Store|README.md|TRANSLATORS|auth.d" -pkg=bindata conf/...
 
 less: public/css/gogs.css
 
 public/css/gogs.css: $(LESS_FILES)
-	lessc $< $@
+	@type lessc >/dev/null 2>&1 && lessc $< >$@ || echo "lessc command not found, skipped."
 
 clean:
 	go clean -i ./...
@@ -80,4 +80,4 @@ todo:
 
 # Legacy code should be remove by the time of release
 legacy:
-	grep -rnw "LEGACY" cmd routers models pkg
+	grep -rnw "LEGACY" cmd routes models pkg

README.md

@@ -1,9 +1,9 @@
-Gogs [![Build Status](https://travis-ci.org/gogits/gogs.svg?branch=master)](https://travis-ci.org/gogits/gogs) [![Build status](https://ci.appveyor.com/api/projects/status/b9uu5ejl933e2wlt/branch/master?svg=true)](https://ci.appveyor.com/project/Unknwon/gogs/branch/master) [![Crowdin](https://d322cqt584bo4o.cloudfront.net/gogs/localized.svg)](https://crowdin.com/project/gogs) [![Sourcegraph](https://sourcegraph.com/github.com/gogits/gogs/-/badge.svg)](https://sourcegraph.com/github.com/gogits/gogs?badge) [![Gitter](https://badges.gitter.im/Join%20Chat.svg)](https://gitter.im/gogits/gogs?utm_source=badge&utm_medium=badge&utm_campaign=pr-badge&utm_content=badge)
+Gogs [![Build Status](https://travis-ci.org/gogs/gogs.svg?branch=master)](https://travis-ci.org/gogs/gogs) [![Build status](https://ci.appveyor.com/api/projects/status/b9uu5ejl933e2wlt/branch/master?svg=true)](https://ci.appveyor.com/project/Unknwon/gogs/branch/master) [![Crowdin](https://d322cqt584bo4o.cloudfront.net/gogs/localized.svg)](https://crowdin.com/project/gogs) [![Discord](https://img.shields.io/discord/382595433060499458.svg)](https://discord.gg/9aqdHU7)
 =====================
 
-![](https://github.com/gogits/gogs/blob/master/public/img/gogs-large-resize.png?raw=true)
+![](https://github.com/gogs/gogs/blob/master/public/img/gogs-large-resize.png?raw=true)
 
-##### Current tip version: [`.VERSION`](templates/.VERSION) (see [Releases](https://github.com/gogits/gogs/releases) for binary versions)
+##### Current tip version: [`.VERSION`](templates/.VERSION) (see [Releases](https://github.com/gogs/gogs/releases) for binary versions)
 
 | Web | UI  | Preview  |
 |:-------------:|:-------:|:-------:|
@@ -13,18 +13,18 @@ Gogs [![Build Status](https://travis-ci.org/gogits/gogs.svg?branch=master)](http
 
 ### Important Notes
 
-1. **YOU MUST READ [Contributing Code](https://github.com/gogits/gogs/wiki/Contributing-Code) BEFORE STARTING TO WORK ON A PULL REQUEST**.
+1. **YOU MUST READ [Contributing Code](https://github.com/gogs/gogs/wiki/Contributing-Code) BEFORE STARTING TO WORK ON A PULL REQUEST**.
 2. Due to testing purpose, data of [try.gogs.io](https://try.gogs.io) was reset in **Jan 28, 2015** and will reset multiple times after. Please do **NOT** put your important data on the site.
 3. The demo site [try.gogs.io](https://try.gogs.io) is running under `develop` branch.
 4. If you think there are vulnerabilities in the project, please talk privately to **u@gogs.io**, and the name you want to be credited as. Thanks!
-5. If you're interested in using APIs, we have experimental support with [documentation](https://github.com/gogits/go-gogs-client/wiki).
+5. If you're interested in using APIs, we have experimental support with [documentation](https://github.com/gogs/go-gogs-client/wiki).
 6. If your team/company is using Gogs and would like to put your logo on [our website](https://gogs.io), contact us by any means.
 
 [简体中文](README_ZH.md)
 
-## Purpose
+## Vision
 
-The goal of this project is to make the easiest, fastest, and most painless way of setting up a self-hosted Git service. With Go, this can be done with an independent binary distribution across **ALL platforms** that Go supports, including Linux, Mac OS X, Windows and ARM.
+This project aims to build a simple, stable and extensible self-hosted Git service that can be setup in the most painless way. With Go, this can be done with an independent binary distribution across **ALL platforms** that Go supports, including Linux, macOS, Windows and ARM.
 
 ## Overview
 
@@ -52,7 +52,7 @@ The goal of this project is to make the easiest, fastest, and most painless way
 - Mail service
 - Administration panel
 - Supports MySQL, PostgreSQL, SQLite3, MSSQL and [TiDB](https://github.com/pingcap/tidb) (via MySQL protocol)
-- Multi-language support ([25 languages](https://crowdin.com/project/gogs))
+- Multi-language support ([30 languages](https://crowdin.com/project/gogs))
 
 ## Hardware Requirements
 
@@ -69,13 +69,14 @@ The goal of this project is to make the easiest, fastest, and most painless way
 
 Make sure you install the [prerequisites](https://gogs.io/docs/installation) first.
 
-There are 5 ways to install Gogs:
+There are 6 ways to install Gogs:
 
 - [Install from binary](https://gogs.io/docs/installation/install_from_binary.html)
 - [Install from source](https://gogs.io/docs/installation/install_from_source.html)
 - [Install from packages](https://gogs.io/docs/installation/install_from_packages.html)
-- [Ship with Docker](https://github.com/gogits/gogs/tree/master/docker)
+- [Ship with Docker](https://github.com/gogs/gogs/tree/master/docker)
 - [Install with Vagrant](https://github.com/geerlingguy/ansible-vagrant-examples/tree/master/gogs)
+- [Install with Kubernetes Using Helm Charts](https://github.com/helm/charts/tree/master/incubator/gogs)
 
 ### Tutorials
 
@@ -83,7 +84,7 @@ There are 5 ways to install Gogs:
 - [Run your own GitHub-like service with the help of Docker](http://blog.hypriot.com/post/run-your-own-github-like-service-with-docker/)
 - [Dockerized Gogs git server and alpine postgres in 20 minutes or less](http://garthwaite.org/docker-gogs.html)
 - [Host Your Own Private GitHub with Gogs](https://eladnava.com/host-your-own-private-github-with-gogs-io/)
-- [使用 Gogs 搭建自己的 Git 服务器](https://mynook.info/blog/post/host-your-own-git-server-using-gogs) (Chinese)
+- [使用 Gogs 搭建自己的 Git 服务器](https://blog.mynook.info/post/host-your-own-git-server-using-gogs/) (Chinese)
 - [阿里云上 Ubuntu 14.04 64 位安装 Gogs](http://my.oschina.net/luyao/blog/375654) (Chinese)
 - [Installing Gogs on FreeBSD](https://www.codejam.info/2015/03/installing-gogs-on-freebsd.html)
 - [Gogs on Raspberry Pi](http://blog.meinside.pe.kr/Gogs-on-Raspberry-Pi/)
@@ -103,6 +104,7 @@ There are 5 ways to install Gogs:
 - [sloppy.io](https://github.com/sloppyio/quickstarters/tree/master/gogs)
 - [YunoHost](https://github.com/YunoHost-Apps/gogs_ynh)
 - [DPlatform](https://github.com/j8r/DPlatform)
+- [LunaNode](https://github.com/LunaNode/launchgogs)
 
 ## Software and Service Support
 
@@ -124,15 +126,18 @@ There are 5 ways to install Gogs:
 ## Acknowledgments
 
 - Thanks [Egon Elbre](https://twitter.com/egonelbre) for designing logo.
-- Thanks [Crowdin](https://crowdin.com/project/gogs) for providing open source translation plan.
-- Thanks [DigitalOcean](https://www.digitalocean.com) for hosting home and demo sites.
-- Thanks [KeyCDN](https://www.keycdn.com/) and [QiNiu](http://www.qiniu.com/) for providing CDN service.
+- Thanks [Crowdin](https://crowdin.com/project/gogs) for sponsoring open source translation plan.
+- Thanks [DigitalOcean](https://www.digitalocean.com), [VPSServer](https://www.vpsserver.com/), [Hosted.nl](https://www.hosted.nl/) and [MonoVM](https://monovm.com) for sponsoring VPS services.
+- Thanks [KeyCDN](https://www.keycdn.com/) for sponsoring CDN service.
+- Thanks [Buildkite](https://buildkite.com) for sponsoring open source CI/CD plan.
 
 ## Contributors
 
-- See [contributors page](https://github.com/gogits/gogs/graphs/contributors) for top 100 contributors.
+- See [contributors page](https://github.com/gogs/gogs/graphs/contributors) for top 100 contributors.
 - See [TRANSLATORS](conf/locale/TRANSLATORS) for public list of translators.
 
 ## License
 
-This project is under the MIT License. See the [LICENSE](https://github.com/gogits/gogs/blob/master/LICENSE) file for the full license text.
+This project is under the MIT License. See the [LICENSE](https://github.com/gogs/gogs/blob/master/LICENSE) file for the full license text.
+
+[![FOSSA Status](https://app.fossa.io/api/projects/git%2Bgithub.com%2Fgogs%2Fgogs.svg?type=small)](https://app.fossa.io/projects/git%2Bgithub.com%2Fgogs%2Fgogs?ref=badge_small)

README_ZH.md

@@ -1,11 +1,11 @@
-Gogs [![Build Status](https://travis-ci.org/gogits/gogs.svg?branch=master)](https://travis-ci.org/gogits/gogs) [![Build status](https://ci.appveyor.com/api/projects/status/b9uu5ejl933e2wlt/branch/master?svg=true)](https://ci.appveyor.com/project/Unknwon/gogs/branch/master)
+Gogs [![Build Status](https://travis-ci.org/gogs/gogs.svg?branch=master)](https://travis-ci.org/gogs/gogs) [![Build status](https://ci.appveyor.com/api/projects/status/b9uu5ejl933e2wlt/branch/master?svg=true)](https://ci.appveyor.com/project/Unknwon/gogs/branch/master)
 =====================
 
 Gogs 是一款极易搭建的自助 Git 服务。
 
-## 开发目的
+## 项目愿景
 
-Gogs 的目标是打造一个最简单、最快速和最轻松的方式搭建自助 Git 服务。使用 Go 语言开发使得 Gogs 能够通过独立的二进制分发，并且支持 Go 语言支持的 **所有平台**，包括 Linux、Mac OS X、Windows 以及 ARM 平台。
+本项目旨在打造一个以最简便的方式搭建简单、稳定和可扩展的自助 Git 服务。使用 Go 语言开发使得 Gogs 能够通过独立的二进制分发，并且支持 Go 语言支持的 **所有平台**，包括 Linux、macOS、Windows 以及 ARM 平台。
 
 ## 项目概览
 
@@ -33,7 +33,7 @@ Gogs 的目标是打造一个最简单、最快速和最轻松的方式搭建自
 - 支持邮件服务
 - 支持后台管理面板
 - 支持 MySQL、PostgreSQL、SQLite3、MSSQL 和 [TiDB](https://github.com/pingcap/tidb)（通过 MySQL 协议）数据库
-- 支持多语言本地化（[25 种语言]([more](https://crowdin.com/project/gogs))）
+- 支持多语言本地化（[30 种语言]([more](https://crowdin.com/project/gogs))）
 
 ## 硬件要求
 
@@ -50,17 +50,18 @@ Gogs 的目标是打造一个最简单、最快速和最轻松的方式搭建自
 
 在安装 Gogs 之前，您需要先安装 [基本环境](https://gogs.io/docs/installation)。
 
-然后，您可以通过以下 5 种方式来安装 Gogs：
+然后，您可以通过以下 6 种方式来安装 Gogs：
 
 - [二进制安装](https://gogs.io/docs/installation/install_from_binary.html)
 - [源码安装](https://gogs.io/docs/installation/install_from_source.html)
 - [包管理安装](https://gogs.io/docs/installation/install_from_packages.html)
-- [采用 Docker 部署](https://github.com/gogits/gogs/tree/master/docker)
+- [采用 Docker 部署](https://github.com/gogs/gogs/tree/master/docker)
 - [通过 Vagrant 安装](https://github.com/geerlingguy/ansible-vagrant-examples/tree/master/gogs)
+- [通过基于 Kubernetes 的 Helm Charts](https://github.com/helm/charts/tree/master/incubator/gogs)
 
 ### 使用教程
 
-- [使用 Gogs 搭建自己的 Git 服务器](https://mynook.info/blog/post/host-your-own-git-server-using-gogs)
+- [使用 Gogs 搭建自己的 Git 服务器](https://blog.mynook.info/post/host-your-own-git-server-using-gogs/)
 - [阿里云上 Ubuntu 14.04 64 位安装 Gogs](http://my.oschina.net/luyao/blog/375654)
 
 ### 云端部署
@@ -72,6 +73,7 @@ Gogs 的目标是打造一个最简单、最快速和最轻松的方式搭建自
 - [sloppy.io](https://github.com/sloppyio/quickstarters/tree/master/gogs)
 - [YunoHost](https://github.com/mbugeia/gogs_ynh)
 - [DPlatform](https://github.com/j8r/DPlatform)
+- [LunaNode](https://github.com/LunaNode/launchgogs)
 
 ## 软件及服务支持
 
@@ -94,14 +96,15 @@ Gogs 的目标是打造一个最简单、最快速和最轻松的方式搭建自
 
 - 感谢 [Egon Elbre](https://twitter.com/egonelbre) 设计的 Logo。
 - 感谢 [Crowdin](https://crowdin.com/project/gogs) 提供免费的开源项目本地化支持。
-- 感谢 [DigitalOcean](https://www.digitalocean.com) 提供主站和体验站点的服务器赞助。
-- 感谢 [KeyCDN](https://www.keycdn.com/) 和 [七牛云存储](http://www.qiniu.com/) 提供 CDN 服务赞助。
+- 感谢 [DigitalOcean](https://www.digitalocean.com)、[VPSServer](https://www.vpsserver.com/)、[Hosted.nl](https://www.hosted.nl/) 和 [MonoVM](https://monovm.com) 提供服务器赞助。
+- 感谢 [KeyCDN](https://www.keycdn.com/) 提供 CDN 服务赞助。
+- 感谢 [Buildkite](https://buildkite.com) 提供免费的开源项目 CI/CD 支持。
 
 ## 贡献成员
 
-- 您可以通过查看 [贡献者页面](https://github.com/gogits/gogs/graphs/contributors) 获取 TOP 100 的贡献者列表。
+- 您可以通过查看 [贡献者页面](https://github.com/gogs/gogs/graphs/contributors) 获取 TOP 100 的贡献者列表。
 - 您可以通过查看 [TRANSLATORS](conf/locale/TRANSLATORS) 文件获取公开的翻译人员列表。
 
 ## 授权许可
 
-本项目采用 MIT 开源授权许可证，完整的授权说明已放置在 [LICENSE](https://github.com/gogits/gogs/blob/master/LICENSE) 文件中。
+本项目采用 MIT 开源授权许可证，完整的授权说明已放置在 [LICENSE](https://github.com/gogs/gogs/blob/master/LICENSE) 文件中。

appveyor.yml

@@ -1,11 +1,11 @@
 version: "{build}"
 skip_tags: true
-clone_folder: c:\gopath\src\github.com\gogits\gogs
+clone_folder: c:\gopath\src\github.com\gogs\gogs
 clone_depth: 1
 
 environment:
   GOPATH: c:\gopath
-  GOVERSION: 1.7
+  GOVERSION: 1.11
 
 build: false
 deploy: false
@@ -17,4 +17,4 @@ notifications:
   - provider: Email
     to:
       - u@gogs.io
-    on_build_success: false
+    on_build_success: false

cmd/admin.go

@@ -6,11 +6,13 @@ package cmd
 
 import (
 	"fmt"
+	"reflect"
+	"runtime"
 
 	"github.com/urfave/cli"
 
-	"github.com/gogits/gogs/models"
-	"github.com/gogits/gogs/pkg/setting"
+	"github.com/gogs/gogs/models"
+	"github.com/gogs/gogs/pkg/setting"
 )
 
 var (
@@ -21,6 +23,13 @@ var (
 to make automatic initialization process more smoothly`,
 		Subcommands: []cli.Command{
 			subcmdCreateUser,
+			subcmdDeleteInactivateUsers,
+			subcmdDeleteRepositoryArchives,
+			subcmdDeleteMissingRepositories,
+			subcmdGitGcRepos,
+			subcmdRewriteAuthorizedKeys,
+			subcmdSyncRepositoryHooks,
+			subcmdReinitMissingRepositories,
 		},
 	}
 
@@ -36,6 +45,90 @@ to make automatic initialization process more smoothly`,
 			stringFlag("config, c", "custom/conf/app.ini", "Custom configuration file path"),
 		},
 	}
+
+	subcmdDeleteInactivateUsers = cli.Command{
+		Name:  "delete-inactive-users",
+		Usage: "Delete all inactive accounts",
+		Action: adminDashboardOperation(
+			models.DeleteInactivateUsers,
+			"All inactivate accounts have been deleted successfully",
+		),
+		Flags: []cli.Flag{
+			stringFlag("config, c", "custom/conf/app.ini", "Custom configuration file path"),
+		},
+	}
+
+	subcmdDeleteRepositoryArchives = cli.Command{
+		Name:  "delete-repository-archives",
+		Usage: "Delete all repositories archives",
+		Action: adminDashboardOperation(
+			models.DeleteRepositoryArchives,
+			"All repositories archives have been deleted successfully",
+		),
+		Flags: []cli.Flag{
+			stringFlag("config, c", "custom/conf/app.ini", "Custom configuration file path"),
+		},
+	}
+
+	subcmdDeleteMissingRepositories = cli.Command{
+		Name:  "delete-missing-repositories",
+		Usage: "Delete all repository records that lost Git files",
+		Action: adminDashboardOperation(
+			models.DeleteMissingRepositories,
+			"All repositories archives have been deleted successfully",
+		),
+		Flags: []cli.Flag{
+			stringFlag("config, c", "custom/conf/app.ini", "Custom configuration file path"),
+		},
+	}
+
+	subcmdGitGcRepos = cli.Command{
+		Name:  "collect-garbage",
+		Usage: "Do garbage collection on repositories",
+		Action: adminDashboardOperation(
+			models.GitGcRepos,
+			"All repositories have done garbage collection successfully",
+		),
+		Flags: []cli.Flag{
+			stringFlag("config, c", "custom/conf/app.ini", "Custom configuration file path"),
+		},
+	}
+
+	subcmdRewriteAuthorizedKeys = cli.Command{
+		Name:  "rewrite-authorized-keys",
+		Usage: "Rewrite '.ssh/authorized_keys' file (caution: non-Gogs keys will be lost)",
+		Action: adminDashboardOperation(
+			models.RewriteAuthorizedKeys,
+			"All public keys have been rewritten successfully",
+		),
+		Flags: []cli.Flag{
+			stringFlag("config, c", "custom/conf/app.ini", "Custom configuration file path"),
+		},
+	}
+
+	subcmdSyncRepositoryHooks = cli.Command{
+		Name:  "resync-hooks",
+		Usage: "Resync pre-receive, update and post-receive hooks",
+		Action: adminDashboardOperation(
+			models.SyncRepositoryHooks,
+			"All repositories' pre-receive, update and post-receive hooks have been resynced successfully",
+		),
+		Flags: []cli.Flag{
+			stringFlag("config, c", "custom/conf/app.ini", "Custom configuration file path"),
+		},
+	}
+
+	subcmdReinitMissingRepositories = cli.Command{
+		Name:  "reinit-missing-repositories",
+		Usage: "Reinitialize all repository records that lost Git files",
+		Action: adminDashboardOperation(
+			models.ReinitMissingRepositories,
+			"All repository records that lost Git files have been reinitialized successfully",
+		),
+		Flags: []cli.Flag{
+			stringFlag("config, c", "custom/conf/app.ini", "Custom configuration file path"),
+		},
+	}
 )
 
 func runCreateUser(c *cli.Context) error {
@@ -68,3 +161,23 @@ func runCreateUser(c *cli.Context) error {
 	fmt.Printf("New user '%s' has been successfully created!\n", c.String("name"))
 	return nil
 }
+
+func adminDashboardOperation(operation func() error, successMessage string) func(*cli.Context) error {
+	return func(c *cli.Context) error {
+		if c.IsSet("config") {
+			setting.CustomConf = c.String("config")
+		}
+
+		setting.NewContext()
+		models.LoadConfigs()
+		models.SetEngine()
+
+		if err := operation(); err != nil {
+			functionName := runtime.FuncForPC(reflect.ValueOf(operation).Pointer()).Name()
+			return fmt.Errorf("%s: %v", functionName, err)
+		}
+
+		fmt.Printf("%s\n", successMessage)
+		return nil
+	}
+}

cmd/backup.go

@@ -17,8 +17,8 @@ import (
 	log "gopkg.in/clog.v1"
 	"gopkg.in/ini.v1"
 
-	"github.com/gogits/gogs/models"
-	"github.com/gogits/gogs/pkg/setting"
+	"github.com/gogs/gogs/models"
+	"github.com/gogs/gogs/pkg/setting"
 )
 
 var Backup = cli.Command{
@@ -39,6 +39,7 @@ portable among all supported database engines.`,
 	},
 }
 
+const _CURRENT_BACKUP_FORMAT_VERSION = 1
 const _ARCHIVE_ROOT_DIR = "gogs-backup"
 
 func runBackup(c *cli.Context) error {
@@ -63,7 +64,7 @@ func runBackup(c *cli.Context) error {
 	// Metadata
 	metaFile := path.Join(rootDir, "metadata.ini")
 	metadata := ini.Empty()
-	metadata.Section("").Key("VERSION").SetValue("1")
+	metadata.Section("").Key("VERSION").SetValue(com.ToStr(_CURRENT_BACKUP_FORMAT_VERSION))
 	metadata.Section("").Key("DATE_TIME").SetValue(time.Now().String())
 	metadata.Section("").Key("GOGS_VERSION").SetValue(setting.AppVer)
 	if err = metadata.SaveTo(metaFile); err != nil {
@@ -99,7 +100,7 @@ func runBackup(c *cli.Context) error {
 
 	// Data files
 	if !c.Bool("database-only") {
-		for _, dir := range []string{"attachments", "avatars"} {
+		for _, dir := range []string{"attachments", "avatars", "repo-avatars"} {
 			dirPath := path.Join(setting.AppDataPath, dir)
 			if !com.IsDir(dirPath) {
 				continue

cmd/hook.go

@@ -11,6 +11,7 @@ import (
 	"fmt"
 	"os"
 	"os/exec"
+	"path"
 	"path/filepath"
 	"strings"
 
@@ -18,12 +19,14 @@ import (
 	"github.com/urfave/cli"
 	log "gopkg.in/clog.v1"
 
-	"github.com/gogits/git-module"
+	"github.com/gogs/git-module"
 
-	"github.com/gogits/gogs/models"
-	"github.com/gogits/gogs/pkg/httplib"
-	"github.com/gogits/gogs/pkg/setting"
-	http "github.com/gogits/gogs/routers/repo"
+	"github.com/gogs/gogs/models"
+	"github.com/gogs/gogs/models/errors"
+	"github.com/gogs/gogs/pkg/httplib"
+	"github.com/gogs/gogs/pkg/mailer"
+	"github.com/gogs/gogs/pkg/setting"
+	"github.com/gogs/gogs/pkg/template"
 )
 
 var (
@@ -67,7 +70,7 @@ func runHookPreReceive(c *cli.Context) error {
 	}
 	setup(c, "hooks/pre-receive.log", true)
 
-	isWiki := strings.Contains(os.Getenv(http.ENV_REPO_CUSTOM_HOOKS_PATH), ".wiki.git/")
+	isWiki := strings.Contains(os.Getenv(models.ENV_REPO_CUSTOM_HOOKS_PATH), ".wiki.git/")
 
 	buf := bytes.NewBuffer(nil)
 	scanner := bufio.NewScanner(os.Stdin)
@@ -88,10 +91,10 @@ func runHookPreReceive(c *cli.Context) error {
 		branchName := strings.TrimPrefix(string(fields[2]), git.BRANCH_PREFIX)
 
 		// Branch protection
-		repoID := com.StrTo(os.Getenv(http.ENV_REPO_ID)).MustInt64()
+		repoID := com.StrTo(os.Getenv(models.ENV_REPO_ID)).MustInt64()
 		protectBranch, err := models.GetProtectBranchOfRepoByName(repoID, branchName)
 		if err != nil {
-			if models.IsErrBranchNotExist(err) {
+			if errors.IsErrBranchNotExist(err) {
 				continue
 			}
 			fail("Internal error", "GetProtectBranchOfRepoByName [repo_id: %d, branch: %s]: %v", repoID, branchName, err)
@@ -104,7 +107,7 @@ func runHookPreReceive(c *cli.Context) error {
 		bypassRequirePullRequest := false
 
 		// Check if user is in whitelist when enabled
-		userID := com.StrTo(os.Getenv(http.ENV_AUTH_USER_ID)).MustInt64()
+		userID := com.StrTo(os.Getenv(models.ENV_AUTH_USER_ID)).MustInt64()
 		if protectBranch.EnableWhitelist {
 			if !models.IsUserInProtectBranchWhitelist(repoID, userID, branchName) {
 				fail(fmt.Sprintf("Branch '%s' is protected and you are not in the push whitelist", branchName), "")
@@ -124,8 +127,8 @@ func runHookPreReceive(c *cli.Context) error {
 		}
 
 		// Check force push
-		output, err := git.NewCommand("rev-list", oldCommitID, "^"+newCommitID).
-			RunInDir(models.RepoPath(os.Getenv(http.ENV_REPO_OWNER_NAME), os.Getenv(http.ENV_REPO_NAME)))
+		output, err := git.NewCommand("rev-list", "--max-count=1", oldCommitID, "^"+newCommitID).
+			RunInDir(models.RepoPath(os.Getenv(models.ENV_REPO_OWNER_NAME), os.Getenv(models.ENV_REPO_NAME)))
 		if err != nil {
 			fail("Internal error", "Fail to detect force push: %v", err)
 		} else if len(output) > 0 {
@@ -133,13 +136,18 @@ func runHookPreReceive(c *cli.Context) error {
 		}
 	}
 
-	customHooksPath := filepath.Join(os.Getenv(http.ENV_REPO_CUSTOM_HOOKS_PATH), "pre-receive")
+	customHooksPath := filepath.Join(os.Getenv(models.ENV_REPO_CUSTOM_HOOKS_PATH), "pre-receive")
 	if !com.IsFile(customHooksPath) {
 		return nil
 	}
 
-	hookCmd := exec.Command(customHooksPath)
-	hookCmd.Dir = models.RepoPath(os.Getenv(http.ENV_REPO_OWNER_NAME), os.Getenv(http.ENV_REPO_NAME))
+	var hookCmd *exec.Cmd
+	if setting.IsWindows {
+		hookCmd = exec.Command("bash.exe", "custom_hooks/pre-receive")
+	} else {
+		hookCmd = exec.Command(customHooksPath)
+	}
+	hookCmd.Dir = models.RepoPath(os.Getenv(models.ENV_REPO_OWNER_NAME), os.Getenv(models.ENV_REPO_NAME))
 	hookCmd.Stdout = os.Stdout
 	hookCmd.Stdin = buf
 	hookCmd.Stderr = os.Stderr
@@ -162,13 +170,18 @@ func runHookUpdate(c *cli.Context) error {
 		fail("First argument 'refName' is empty", "First argument 'refName' is empty")
 	}
 
-	customHooksPath := filepath.Join(os.Getenv(http.ENV_REPO_CUSTOM_HOOKS_PATH), "update")
+	customHooksPath := filepath.Join(os.Getenv(models.ENV_REPO_CUSTOM_HOOKS_PATH), "update")
 	if !com.IsFile(customHooksPath) {
 		return nil
 	}
 
-	hookCmd := exec.Command(customHooksPath, args...)
-	hookCmd.Dir = models.RepoPath(os.Getenv(http.ENV_REPO_OWNER_NAME), os.Getenv(http.ENV_REPO_NAME))
+	var hookCmd *exec.Cmd
+	if setting.IsWindows {
+		hookCmd = exec.Command("bash.exe", append([]string{"custom_hooks/update"}, args...)...)
+	} else {
+		hookCmd = exec.Command(customHooksPath, args...)
+	}
+	hookCmd.Dir = models.RepoPath(os.Getenv(models.ENV_REPO_OWNER_NAME), os.Getenv(models.ENV_REPO_NAME))
 	hookCmd.Stdout = os.Stdout
 	hookCmd.Stdin = os.Stdin
 	hookCmd.Stderr = os.Stderr
@@ -184,7 +197,14 @@ func runHookPostReceive(c *cli.Context) error {
 	}
 	setup(c, "hooks/post-receive.log", true)
 
-	isWiki := strings.Contains(os.Getenv(http.ENV_REPO_CUSTOM_HOOKS_PATH), ".wiki.git/")
+	// Post-receive hook does more than just gather Git information,
+	// so we need to setup additional services for email notifications.
+	setting.NewPostReceiveHookServices()
+	mailer.NewContext()
+	mailer.InitMailRender(path.Join(setting.StaticRootPath, "templates/mail"),
+		path.Join(setting.CustomPath, "templates/mail"), template.NewFuncMap())
+
+	isWiki := strings.Contains(os.Getenv(models.ENV_REPO_CUSTOM_HOOKS_PATH), ".wiki.git/")
 
 	buf := bytes.NewBuffer(nil)
 	scanner := bufio.NewScanner(os.Stdin)
@@ -206,20 +226,20 @@ func runHookPostReceive(c *cli.Context) error {
 			OldCommitID:  string(fields[0]),
 			NewCommitID:  string(fields[1]),
 			RefFullName:  string(fields[2]),
-			PusherID:     com.StrTo(os.Getenv(http.ENV_AUTH_USER_ID)).MustInt64(),
-			PusherName:   os.Getenv(http.ENV_AUTH_USER_NAME),
-			RepoUserName: os.Getenv(http.ENV_REPO_OWNER_NAME),
-			RepoName:     os.Getenv(http.ENV_REPO_NAME),
+			PusherID:     com.StrTo(os.Getenv(models.ENV_AUTH_USER_ID)).MustInt64(),
+			PusherName:   os.Getenv(models.ENV_AUTH_USER_NAME),
+			RepoUserName: os.Getenv(models.ENV_REPO_OWNER_NAME),
+			RepoName:     os.Getenv(models.ENV_REPO_NAME),
 		}
 		if err := models.PushUpdate(options); err != nil {
 			log.Error(2, "PushUpdate: %v", err)
 		}
 
-		// Ask for running deliver hook and test pull request tasks.
+		// Ask for running deliver hook and test pull request tasks
 		reqURL := setting.LocalURL + options.RepoUserName + "/" + options.RepoName + "/tasks/trigger?branch=" +
-			strings.TrimPrefix(options.RefFullName, git.BRANCH_PREFIX) +
-			"&secret=" + os.Getenv(http.ENV_REPO_OWNER_SALT_MD5) +
-			"&pusher=" + os.Getenv(http.ENV_AUTH_USER_ID)
+			template.EscapePound(strings.TrimPrefix(options.RefFullName, git.BRANCH_PREFIX)) +
+			"&secret=" + os.Getenv(models.ENV_REPO_OWNER_SALT_MD5) +
+			"&pusher=" + os.Getenv(models.ENV_AUTH_USER_ID)
 		log.Trace("Trigger task: %s", reqURL)
 
 		resp, err := httplib.Head(reqURL).SetTLSClientConfig(&tls.Config{
@@ -235,13 +255,18 @@ func runHookPostReceive(c *cli.Context) error {
 		}
 	}
 
-	customHooksPath := filepath.Join(os.Getenv(http.ENV_REPO_CUSTOM_HOOKS_PATH), "post-receive")
+	customHooksPath := filepath.Join(os.Getenv(models.ENV_REPO_CUSTOM_HOOKS_PATH), "post-receive")
 	if !com.IsFile(customHooksPath) {
 		return nil
 	}
 
-	hookCmd := exec.Command(customHooksPath)
-	hookCmd.Dir = models.RepoPath(os.Getenv(http.ENV_REPO_OWNER_NAME), os.Getenv(http.ENV_REPO_NAME))
+	var hookCmd *exec.Cmd
+	if setting.IsWindows {
+		hookCmd = exec.Command("bash.exe", "custom_hooks/post-receive")
+	} else {
+		hookCmd = exec.Command(customHooksPath)
+	}
+	hookCmd.Dir = models.RepoPath(os.Getenv(models.ENV_REPO_OWNER_NAME), os.Getenv(models.ENV_REPO_NAME))
 	hookCmd.Stdout = os.Stdout
 	hookCmd.Stdin = buf
 	hookCmd.Stderr = os.Stderr

cmd/import.go

@@ -15,7 +15,7 @@ import (
 	"github.com/Unknwon/com"
 	"github.com/urfave/cli"
 
-	"github.com/gogits/gogs/pkg/setting"
+	"github.com/gogs/gogs/pkg/setting"
 )
 
 var (

cmd/restore.go

@@ -15,8 +15,8 @@ import (
 	log "gopkg.in/clog.v1"
 	"gopkg.in/ini.v1"
 
-	"github.com/gogits/gogs/models"
-	"github.com/gogits/gogs/pkg/setting"
+	"github.com/gogs/gogs/models"
+	"github.com/gogs/gogs/pkg/setting"
 )
 
 var Restore = cli.Command{
@@ -39,6 +39,10 @@ be skipped and remain unchanged.`,
 	},
 }
 
+// lastSupportedVersionOfFormat returns the last supported version of the backup archive
+// format that is able to import.
+var lastSupportedVersionOfFormat = map[int]string{}
+
 func runRestore(c *cli.Context) error {
 	zip.Verbose = c.Bool("verbose")
 
@@ -49,9 +53,10 @@ func runRestore(c *cli.Context) error {
 
 	log.Info("Restore backup from: %s", c.String("from"))
 	if err := zip.ExtractTo(c.String("from"), tmpDir); err != nil {
-		log.Fatal(0, "Fail to extract backup archive: %v", err)
+		log.Fatal(0, "Failed to extract backup archive: %v", err)
 	}
 	archivePath := path.Join(tmpDir, _ARCHIVE_ROOT_DIR)
+	defer os.RemoveAll(archivePath)
 
 	// Check backup version
 	metaFile := path.Join(archivePath, "metadata.ini")
@@ -60,12 +65,20 @@ func runRestore(c *cli.Context) error {
 	}
 	metadata, err := ini.Load(metaFile)
 	if err != nil {
-		log.Fatal(0, "Fail to load metadata '%s': %v", metaFile, err)
+		log.Fatal(0, "Failed to load metadata '%s': %v", metaFile, err)
 	}
 	backupVersion := metadata.Section("").Key("GOGS_VERSION").MustString("999.0")
 	if version.Compare(setting.AppVer, backupVersion, "<") {
 		log.Fatal(0, "Current Gogs version is lower than backup version: %s < %s", setting.AppVer, backupVersion)
 	}
+	formatVersion := metadata.Section("").Key("VERSION").MustInt()
+	if formatVersion == 0 {
+		log.Fatal(0, "Failed to determine the backup format version from metadata '%s': %s", metaFile, "VERSION is not presented")
+	}
+	if formatVersion != _CURRENT_BACKUP_FORMAT_VERSION {
+		log.Fatal(0, "Backup format version found is %d but this binary only supports %d\nThe last known version that is able to import your backup is %s",
+			formatVersion, _CURRENT_BACKUP_FORMAT_VERSION, lastSupportedVersionOfFormat[formatVersion])
+	}
 
 	// If config file is not present in backup, user must set this file via flag.
 	// Otherwise, it's optional to set config file flag.
@@ -84,33 +97,39 @@ func runRestore(c *cli.Context) error {
 	// Database
 	dbDir := path.Join(archivePath, "db")
 	if err = models.ImportDatabase(dbDir, c.Bool("verbose")); err != nil {
-		log.Fatal(0, "Fail to import database: %v", err)
+		log.Fatal(0, "Failed to import database: %v", err)
 	}
 
 	// Custom files
 	if !c.Bool("database-only") {
 		if com.IsExist(setting.CustomPath) {
 			if err = os.Rename(setting.CustomPath, setting.CustomPath+".bak"); err != nil {
-				log.Fatal(0, "Fail to backup current 'custom': %v", err)
+				log.Fatal(0, "Failed to backup current 'custom': %v", err)
 			}
 		}
 		if err = os.Rename(path.Join(archivePath, "custom"), setting.CustomPath); err != nil {
-			log.Fatal(0, "Fail to import 'custom': %v", err)
+			log.Fatal(0, "Failed to import 'custom': %v", err)
 		}
 	}
 
 	// Data files
 	if !c.Bool("database-only") {
 		os.MkdirAll(setting.AppDataPath, os.ModePerm)
-		for _, dir := range []string{"attachments", "avatars"} {
+		for _, dir := range []string{"attachments", "avatars", "repo-avatars"} {
+			// Skip if backup archive does not have corresponding data
+			srcPath := path.Join(archivePath, "data", dir)
+			if !com.IsDir(srcPath) {
+				continue
+			}
+
 			dirPath := path.Join(setting.AppDataPath, dir)
 			if com.IsExist(dirPath) {
 				if err = os.Rename(dirPath, dirPath+".bak"); err != nil {
-					log.Fatal(0, "Fail to backup current 'data': %v", err)
+					log.Fatal(0, "Failed to backup current 'data': %v", err)
 				}
 			}
-			if err = os.Rename(path.Join(archivePath, "data", dir), dirPath); err != nil {
-				log.Fatal(0, "Fail to import 'data': %v", err)
+			if err = os.Rename(srcPath, dirPath); err != nil {
+				log.Fatal(0, "Failed to import 'data': %v", err)
 			}
 		}
 	}
@@ -119,11 +138,10 @@ func runRestore(c *cli.Context) error {
 	reposPath := path.Join(archivePath, "repositories.zip")
 	if !c.Bool("exclude-repos") && !c.Bool("database-only") && com.IsExist(reposPath) {
 		if err := zip.ExtractTo(reposPath, path.Dir(setting.RepoRootPath)); err != nil {
-			log.Fatal(0, "Fail to extract 'repositories.zip': %v", err)
+			log.Fatal(0, "Failed to extract 'repositories.zip': %v", err)
 		}
 	}
 
-	os.RemoveAll(path.Join(tmpDir, _ARCHIVE_ROOT_DIR))
 	log.Info("Restore succeed!")
 	log.Shutdown()
 	return nil

cmd/serv.go

@@ -16,10 +16,9 @@ import (
 	"github.com/urfave/cli"
 	log "gopkg.in/clog.v1"
 
-	"github.com/gogits/gogs/models"
-	"github.com/gogits/gogs/models/errors"
-	"github.com/gogits/gogs/pkg/setting"
-	http "github.com/gogits/gogs/routers/repo"
+	"github.com/gogs/gogs/models"
+	"github.com/gogs/gogs/models/errors"
+	"github.com/gogs/gogs/pkg/setting"
 )
 
 const (
@@ -200,7 +199,7 @@ func runServ(c *cli.Context) error {
 				fail("Internal error", "Fail to get user by key ID '%d': %v", key.ID, err)
 			}
 
-			mode, err := models.AccessLevel(user.ID, repo)
+			mode, err := models.UserAccessMode(user.ID, repo)
 			if err != nil {
 				fail("Internal error", "Fail to check access: %v", err)
 			}
@@ -252,7 +251,7 @@ func runServ(c *cli.Context) error {
 		gitCmd = exec.Command(verb, repoFullName)
 	}
 	if requestMode == models.ACCESS_MODE_WRITE {
-		gitCmd.Env = append(os.Environ(), http.ComposeHookEnvs(http.ComposeHookEnvsOptions{
+		gitCmd.Env = append(os.Environ(), models.ComposeHookEnvs(models.ComposeHookEnvsOptions{
 			AuthUser:  user,
 			OwnerName: owner.Name,
 			OwnerSalt: owner.Salt,

cmd/web.go

@@ -25,24 +25,25 @@ import (
 	"github.com/go-macaron/session"
 	"github.com/go-macaron/toolbox"
 	"github.com/mcuadros/go-version"
+	"github.com/prometheus/client_golang/prometheus/promhttp"
 	"github.com/urfave/cli"
 	log "gopkg.in/clog.v1"
 	"gopkg.in/macaron.v1"
 
-	"github.com/gogits/gogs/models"
-	"github.com/gogits/gogs/pkg/bindata"
-	"github.com/gogits/gogs/pkg/context"
-	"github.com/gogits/gogs/pkg/form"
-	"github.com/gogits/gogs/pkg/mailer"
-	"github.com/gogits/gogs/pkg/setting"
-	"github.com/gogits/gogs/pkg/template"
-	"github.com/gogits/gogs/routers"
-	"github.com/gogits/gogs/routers/admin"
-	apiv1 "github.com/gogits/gogs/routers/api/v1"
-	"github.com/gogits/gogs/routers/dev"
-	"github.com/gogits/gogs/routers/org"
-	"github.com/gogits/gogs/routers/repo"
-	"github.com/gogits/gogs/routers/user"
+	"github.com/gogs/gogs/models"
+	"github.com/gogs/gogs/pkg/bindata"
+	"github.com/gogs/gogs/pkg/context"
+	"github.com/gogs/gogs/pkg/form"
+	"github.com/gogs/gogs/pkg/mailer"
+	"github.com/gogs/gogs/pkg/setting"
+	"github.com/gogs/gogs/pkg/template"
+	"github.com/gogs/gogs/routes"
+	"github.com/gogs/gogs/routes/admin"
+	apiv1 "github.com/gogs/gogs/routes/api/v1"
+	"github.com/gogs/gogs/routes/dev"
+	"github.com/gogs/gogs/routes/org"
+	"github.com/gogs/gogs/routes/repo"
+	"github.com/gogs/gogs/routes/user"
 )
 
 var Web = cli.Command{
@@ -64,7 +65,7 @@ func checkVersion() {
 	if err != nil {
 		log.Fatal(2, "Fail to read 'templates/.VERSION': %v", err)
 	}
-	tplVer := string(data)
+	tplVer := strings.TrimSpace(string(data))
 	if tplVer != setting.AppVer {
 		if version.Compare(tplVer, setting.AppVer, ">") {
 			log.Fatal(2, "Binary version is lower than template file version, did you forget to recompile Gogs?")
@@ -96,7 +97,14 @@ func newMacaron() *macaron.Macaron {
 	m.Use(macaron.Static(
 		setting.AvatarUploadPath,
 		macaron.StaticOptions{
-			Prefix:      "avatars",
+			Prefix:      models.USER_AVATAR_URL_PREFIX,
+			SkipLogging: setting.DisableRouterLog,
+		},
+	))
+	m.Use(macaron.Static(
+		setting.RepositoryAvatarUploadPath,
+		macaron.StaticOptions{
+			Prefix:      models.REPO_AVATAR_URL_PREFIX,
 			SkipLogging: setting.DisableRouterLog,
 		},
 	))
@@ -160,7 +168,7 @@ func runWeb(c *cli.Context) error {
 	if c.IsSet("config") {
 		setting.CustomConf = c.String("config")
 	}
-	routers.GlobalInit()
+	routes.GlobalInit()
 	checkVersion()
 
 	m := newMacaron()
@@ -172,20 +180,22 @@ func runWeb(c *cli.Context) error {
 
 	bindIgnErr := binding.BindIgnErr
 
+	m.SetAutoHead(true)
+
 	// FIXME: not all routes need go through same middlewares.
 	// Especially some AJAX requests, we can reduce middleware number to improve performance.
 	// Routers.
-	m.Get("/", ignSignIn, routers.Home)
+	m.Get("/", ignSignIn, routes.Home)
 	m.Group("/explore", func() {
 		m.Get("", func(c *context.Context) {
 			c.Redirect(setting.AppSubURL + "/explore/repos")
 		})
-		m.Get("/repos", routers.ExploreRepos)
-		m.Get("/users", routers.ExploreUsers)
-		m.Get("/organizations", routers.ExploreOrganizations)
+		m.Get("/repos", routes.ExploreRepos)
+		m.Get("/users", routes.ExploreUsers)
+		m.Get("/organizations", routes.ExploreOrganizations)
 	}, ignSignIn)
-	m.Combo("/install", routers.InstallInit).Get(routers.Install).
-		Post(bindIgnErr(form.Install{}), routers.InstallPost)
+	m.Combo("/install", routes.InstallInit).Get(routes.Install).
+		Post(bindIgnErr(form.Install{}), routes.InstallPost)
 	m.Get("/^:type(issues|pulls)$", reqSignIn, user.Issues)
 
 	// ***** START: User *****
@@ -247,15 +257,15 @@ func runWeb(c *cli.Context) error {
 		m.Get("/email2user", user.Email2User)
 		m.Get("/forget_password", user.ForgotPasswd)
 		m.Post("/forget_password", user.ForgotPasswdPost)
-		m.Get("/logout", user.SignOut)
+		m.Post("/logout", user.SignOut)
 	})
 	// ***** END: User *****
 
-	adminReq := context.Toggle(&context.ToggleOptions{SignInRequired: true, AdminRequired: true})
+	reqAdmin := context.Toggle(&context.ToggleOptions{SignInRequired: true, AdminRequired: true})
 
 	// ***** START: Admin *****
 	m.Group("/admin", func() {
-		m.Get("", adminReq, admin.Dashboard)
+		m.Get("", admin.Dashboard)
 		m.Get("/config", admin.Config)
 		m.Post("/config/test_mail", admin.SendTestMail)
 		m.Get("/monitor", admin.Monitor)
@@ -289,7 +299,7 @@ func runWeb(c *cli.Context) error {
 			m.Post("/delete", admin.DeleteNotices)
 			m.Get("/empty", admin.EmptyNotices)
 		})
-	}, adminReq)
+	}, reqAdmin)
 	// ***** END: Admin *****
 
 	m.Group("", func() {
@@ -298,7 +308,7 @@ func runWeb(c *cli.Context) error {
 			m.Get("/followers", user.Followers)
 			m.Get("/following", user.Following)
 			m.Get("/stars", user.Stars)
-		})
+		}, context.InjectParamsUser())
 
 		m.Get("/attachments/:uuid", func(c *context.Context) {
 			attach, err := models.GetAttachmentByUUID(c.Params(":uuid"))
@@ -330,8 +340,8 @@ func runWeb(c *cli.Context) error {
 	}, ignSignIn)
 
 	m.Group("/:username", func() {
-		m.Get("/action/:action", user.Action)
-	}, reqSignIn)
+		m.Post("/action/:action", user.Action)
+	}, reqSignIn, context.InjectParamsUser())
 
 	if macaron.Env == macaron.DEV {
 		m.Get("/template/*", dev.TemplatePreview)
@@ -387,10 +397,12 @@ func runWeb(c *cli.Context) error {
 					m.Post("/gogs/new", bindIgnErr(form.NewWebhook{}), repo.WebHooksNewPost)
 					m.Post("/slack/new", bindIgnErr(form.NewSlackHook{}), repo.SlackHooksNewPost)
 					m.Post("/discord/new", bindIgnErr(form.NewDiscordHook{}), repo.DiscordHooksNewPost)
+					m.Post("/dingtalk/new", bindIgnErr(form.NewDingtalkHook{}), repo.DingtalkHooksNewPost)
 					m.Get("/:id", repo.WebHooksEdit)
 					m.Post("/gogs/:id", bindIgnErr(form.NewWebhook{}), repo.WebHooksEditPost)
 					m.Post("/slack/:id", bindIgnErr(form.NewSlackHook{}), repo.SlackHooksEditPost)
 					m.Post("/discord/:id", bindIgnErr(form.NewDiscordHook{}), repo.DiscordHooksEditPost)
+					m.Post("/dingtalk/:id", bindIgnErr(form.NewDingtalkHook{}), repo.DingtalkHooksEditPost)
 				})
 
 				m.Route("/delete", "GET,POST", org.SettingsDelete)
@@ -415,6 +427,9 @@ func runWeb(c *cli.Context) error {
 		m.Group("/settings", func() {
 			m.Combo("").Get(repo.Settings).
 				Post(bindIgnErr(form.RepoSetting{}), repo.SettingsPost)
+			m.Combo("/avatar").Get(repo.SettingsAvatar).
+				Post(binding.MultipartForm(form.Avatar{}), repo.SettingsAvatarPost)
+			m.Post("/avatar/delete", repo.SettingsDeleteAvatar)
 			m.Group("/collaboration", func() {
 				m.Combo("").Get(repo.SettingsCollaboration).Post(repo.SettingsCollaborationPost)
 				m.Post("/access_mode", repo.ChangeCollaborationAccessMode)
@@ -439,9 +454,11 @@ func runWeb(c *cli.Context) error {
 				m.Post("/gogs/new", bindIgnErr(form.NewWebhook{}), repo.WebHooksNewPost)
 				m.Post("/slack/new", bindIgnErr(form.NewSlackHook{}), repo.SlackHooksNewPost)
 				m.Post("/discord/new", bindIgnErr(form.NewDiscordHook{}), repo.DiscordHooksNewPost)
+				m.Post("/dingtalk/new", bindIgnErr(form.NewDingtalkHook{}), repo.DingtalkHooksNewPost)
 				m.Post("/gogs/:id", bindIgnErr(form.NewWebhook{}), repo.WebHooksEditPost)
 				m.Post("/slack/:id", bindIgnErr(form.NewSlackHook{}), repo.SlackHooksEditPost)
 				m.Post("/discord/:id", bindIgnErr(form.NewDiscordHook{}), repo.DiscordHooksEditPost)
+				m.Post("/dingtalk/:id", bindIgnErr(form.NewDingtalkHook{}), repo.DingtalkHooksEditPost)
 
 				m.Group("/:id", func() {
 					m.Get("", repo.WebHooksEdit)
@@ -467,7 +484,7 @@ func runWeb(c *cli.Context) error {
 		})
 	}, reqSignIn, context.RepoAssignment(), reqRepoAdmin, context.RepoRef())
 
-	m.Get("/:username/:reponame/action/:action", reqSignIn, context.RepoAssignment(), repo.Action)
+	m.Post("/:username/:reponame/action/:action", reqSignIn, context.RepoAssignment(), repo.Action)
 	m.Group("/:username/:reponame", func() {
 		m.Get("/issues", repo.RetrieveLabels, repo.Issues)
 		m.Get("/issues/:index", repo.ViewIssue)
@@ -631,8 +648,10 @@ func runWeb(c *cli.Context) error {
 		// e.g. with or without ".git" suffix.
 		m.Group("/:reponame([\\d\\w-_\\.]+\\.git$)", func() {
 			m.Get("", ignSignIn, context.RepoAssignment(), context.RepoRef(), repo.Home)
+			m.Options("/*", ignSignInAndCsrf, repo.HTTPContexter(), repo.HTTP)
 			m.Route("/*", "GET,POST", ignSignInAndCsrf, repo.HTTPContexter(), repo.HTTP)
 		})
+		m.Options("/:reponame/*", ignSignInAndCsrf, repo.HTTPContexter(), repo.HTTP)
 		m.Route("/:reponame/*", "GET,POST", ignSignInAndCsrf, repo.HTTPContexter(), repo.HTTP)
 	})
 	// ***** END: Repository *****
@@ -641,6 +660,18 @@ func runWeb(c *cli.Context) error {
 		apiv1.RegisterRoutes(m)
 	}, ignSignIn)
 
+	m.Group("/-", func() {
+		if setting.Prometheus.Enabled {
+			m.Get("/metrics", func(c *context.Context) {
+				if !setting.Prometheus.EnableBasicAuth {
+					return
+				}
+
+				c.RequireBasicAuth(setting.Prometheus.BasicAuthUsername, setting.Prometheus.BasicAuthPassword)
+			}, promhttp.Handler())
+		}
+	})
+
 	// robots.txt
 	m.Get("/robots.txt", func(c *context.Context) {
 		if setting.HasRobotsTxt {
@@ -651,7 +682,7 @@ func runWeb(c *cli.Context) error {
 	})
 
 	// Not found handler.
-	m.NotFound(routers.NotFound)
+	m.NotFound(routes.NotFound)
 
 	// Flag for port number in case first time run conflict.
 	if c.IsSet("port") {
@@ -719,7 +750,7 @@ func runWeb(c *cli.Context) error {
 	}
 
 	if err != nil {
-		log.Fatal(4, "Fail to start server: %v", err)
+		log.Fatal(4, "Failed to start server: %v", err)
 	}
 
 	return nil

conf/README.md

@@ -1,3 +1,6 @@
 Execute following command in ROOT directory when anything is changed:
 
-$ make bindata
+```
+$ go get -u github.com/go-bindata/go-bindata/...
+$ make bindata
+```

conf/app.ini

@@ -35,6 +35,8 @@ SSH_LISTEN_HOST = 0.0.0.0
 SSH_LISTEN_PORT = %(SSH_PORT)s
 ; Root path of SSH directory, default is '~/.ssh', but you have to use '/home/git/.ssh'.
 SSH_ROOT_PATH =
+; Indicate whether to rewrite authorized_keys at start, ignored when use builtin SSH server
+REWRITE_AUTHORIZED_KEYS_AT_START = false
 ; Choose the ciphers to support for SSH connections
 SSH_SERVER_CIPHERS = aes128-ctr, aes192-ctr, aes256-ctr, aes128-gcm@openssh.com, arcfour256, arcfour128
 ; Directory to create temporary files when test publick key using ssh-keygen,
@@ -94,7 +96,7 @@ ENABLE_LOCAL_PATH_MIGRATION = false
 ; Concurrency is used to retrieve commits information. This variable define
 ; the maximum number of tasks that can be run at the same time. Usually, the
 ; value depend of how many CPUs (cores) you have. If the value is set to zero
-; or under, GOGS will automatically detect the number of CPUs your system have
+; or under, Gogs will automatically detect the number of CPUs your system have
 COMMITS_FETCH_CONCURRENCY = 0
 ; Enable render mode for raw file
 ENABLE_RAW_FILE_RENDER_MODE = false
@@ -209,8 +211,8 @@ ENABLE_REVERSE_PROXY_AUTO_REGISTRATION = false
 ENABLE_CAPTCHA = true
 
 [webhook]
-; Types are enabled for users to use, can be "gogs", "slack", "discord"
-TYPES = gogs, slack, discord
+; Types are enabled for users to use, can be "gogs", "slack", "discord", "dingtalk"
+TYPES = gogs, slack, discord, dingtalk
 ; Hook task queue length, increase if webhook shooting starts hanging
 QUEUE_LENGTH = 1000
 ; Deliver timeout in seconds
@@ -224,8 +226,8 @@ PAGING_NUM = 10
 ENABLED = false
 ; Buffer length of channel, keep it as it is if you don't know what it is.
 SEND_BUFFER_LEN = 100
-; Name displayed in mail title
-SUBJECT = %(APP_NAME)s
+; Prefix prepended to the subject line
+SUBJECT_PREFIX = `[%(APP_NAME)s] `
 ; Mail server
 ; Gmail: smtp.gmail.com:587
 ; QQ: smtp.qq.com:465
@@ -248,6 +250,8 @@ USER =
 PASSWD =
 ; Use text/plain as format of content
 USE_PLAIN_TEXT = false
+; If sending html emails, then also attach a plaintext alternative to the MIME message, to support older mail clients and make spam filters happier.
+ADD_PLAIN_TEXT_ALT = false
 
 [cache]
 ; Either "memory", "redis", or "memcache", default is "memory"
@@ -269,7 +273,7 @@ PROVIDER = memory
 ; mysql: go-sql-driver/mysql dsn config string, e.g. `root:password@/session_table`
 PROVIDER_CONFIG = data/sessions
 ; Session cookie name
-COOKIE_NAME = i_like_gogits
+COOKIE_NAME = i_like_gogs
 ; If you use session in https only, default is false
 COOKIE_SECURE = false
 ; Enable set cookie, default is true
@@ -284,6 +288,8 @@ CSRF_COOKIE_NAME = _csrf
 [picture]
 ; Path to store user uploaded avatars
 AVATAR_UPLOAD_PATH = data/avatars
+; Path to store repository uploaded avatars
+REPOSITORY_AVATAR_UPLOAD_PATH = data/repo-avatars
 ; Chinese users can choose "duoshuo"
 ; or a custom avatar source, like: http://cn.gravatar.com/avatar/
 GRAVATAR_SOURCE = gravatar
@@ -292,7 +298,7 @@ DISABLE_GRAVATAR = false
 ; Federated avatar lookup uses DNS to discover avatar associated
 ; with emails, see https://www.libravatar.org
 ; This value will be forced to be false in offline mode or Gravatar is disbaled.
-ENABLE_FEDERATED_AVATAR = true
+ENABLE_FEDERATED_AVATAR = false
 
 ; Attachment settings for issues
 [attachment]
@@ -326,13 +332,13 @@ LEVEL = Trace
 
 ; For "console" mode only
 [log.console]
-; leave empty to inherit
-LEVEL =
+; Comment out to inherit
+; LEVEL =
 
 ; For "file" mode only
 [log.file]
-; leave empty to inherit
-LEVEL =
+; Comment out to inherit
+; LEVEL =
 ; This enables automated log rotate (switch of following options)
 LOG_ROTATE = true
 ; Segment log daily
@@ -346,11 +352,19 @@ MAX_DAYS = 7
 
 ; For "slack" mode only
 [log.slack]
-; leave empty to inherit
-LEVEL =
+; Comment out to inherit
+; LEVEL =
 ; Webhook URL
 URL =
 
+[log.discord]
+; Comment out to inherit
+; LEVEL =
+; Webhook URL
+URL =
+; Username displayed in webhook
+USERNAME = %(APP_NAME)s
+
 [log.xorm]
 ; Enable file rotation
 ROTATE = true
@@ -452,9 +466,15 @@ NEWS_FEED_PAGING_NUM = 20
 ; Number of commits that are showed in one page
 COMMITS_PAGING_NUM = 30
 
+[prometheus]
+ENABLED = true
+ENABLE_BASIC_AUTH = false
+BASIC_AUTH_USERNAME =
+BASIC_AUTH_PASSWORD =
+
 [i18n]
-LANGS = en-US,zh-CN,zh-HK,zh-TW,de-DE,fr-FR,nl-NL,lv-LV,ru-RU,ja-JP,es-ES,pt-BR,pl-PL,bg-BG,it-IT,fi-FI,tr-TR,cs-CZ,sr-SP,sv-SE,ko-KR,gl-ES,uk-UA,en-GB,hu-HU
-NAMES = English,简体中文,繁體中文（香港）,繁體中文（台湾）,Deutsch,français,Nederlands,latviešu,русский,日本語,español,português do Brasil,polski,български,italiano,suomi,Türkçe,čeština,српски,svenska,한국어,galego,українська,English (United Kingdom),Magyar
+LANGS = en-US,zh-CN,zh-HK,zh-TW,de-DE,fr-FR,nl-NL,lv-LV,ru-RU,ja-JP,es-ES,pt-BR,pl-PL,bg-BG,it-IT,fi-FI,tr-TR,cs-CZ,sr-SP,sv-SE,ko-KR,gl-ES,uk-UA,en-GB,hu-HU,sk-SK,id-ID,fa-IR,vi-VN,pt-PT
+NAMES = English,简体中文,繁體中文（香港）,繁體中文（臺灣）,Deutsch,français,Nederlands,latviešu,русский,日本語,español,português do Brasil,polski,български,italiano,suomi,Türkçe,čeština,српски,svenska,한국어,galego,українська,English (United Kingdom),Magyar,Slovenčina,Indonesian,Persian,Vietnamese,Português
 
 ; Used for datetimepicker
 [i18n.datelang]
@@ -481,6 +501,13 @@ sv-SE = sv
 ko-KR = ko
 gl-ES = gl
 uk-UA = uk
+en-GB = en-GB
+hu-HU = hu
+sk-SK = sk
+id-ID = id
+fa-IR = fa
+vi-VN = vi
+pt-PT = pt
 
 ; Extension mapping to highlight class
 ; e.g. .toml=ini

conf/auth.d/github.conf.example

@@ -0,0 +1,10 @@
+# This is an example of GitHub authentication
+#
+id           = 105
+type         = github
+name         = GitHub
+is_activated = true
+
+[config]
+api_endpoint = https://api.github.com/
+

conf/auth.d/ldap_bind_dn.conf.example

@@ -0,0 +1,29 @@
+# This is an example of LDAP (BindDN) authentication
+#
+id           = 101
+type         = ldap_bind_dn
+name         = LDAP BindDN
+is_activated = true
+
+[config]
+host               = mydomain.com
+port               = 636
+# 0 - Unencrypted, 1 - LDAPS, 2 - StartTLS
+security_protocol  = 0
+skip_verify        = false
+bind_dn            = 
+bind_password      = 
+user_base          = ou=Users,dc=mydomain,dc=com
+attribute_username = 
+attribute_name     = 
+attribute_surname  = 
+attribute_mail     = mail
+attributes_in_bind = false
+filter             = (&(objectClass=posixAccount)(cn=%s))
+admin_filter       = 
+group_enabled      = false
+group_dn           = 
+group_filter       = 
+group_member_uid   = 
+user_uid           = 
+

conf/auth.d/ldap_simple_auth.conf.example

@@ -0,0 +1,30 @@
+# This is an example of LDAP (simple auth) authentication
+#
+id           = 102
+type         = ldap_simple_auth
+name         = LDAP Simple Auth
+is_activated = true
+
+[config]
+host               = mydomain.com
+port               = 636
+# 0 - Unencrypted, 1 - LDAPS, 2 - StartTLS
+security_protocol  = 0
+skip_verify        = false
+bind_dn            = 
+bind_password      = 
+user_base          = 
+user_dn            = cn=%s,ou=Users,dc=mydomain,dc=com
+attribute_username = 
+attribute_name     = 
+attribute_surname  = 
+attribute_mail     = mail
+attributes_in_bind = false
+filter             = (&(objectClass=posixAccount)(cn=%s))
+admin_filter       = 
+group_enabled      = false
+group_dn           = 
+group_filter       = 
+group_member_uid   = 
+user_uid           = 
+

conf/auth.d/pam.conf.example

@@ -0,0 +1,10 @@
+# This is an example of PAM authentication
+#
+id           = 104
+type         = pam
+name         = System Auth
+is_activated = true
+
+[config]
+service_name = system-auth
+

conf/auth.d/smtp.conf.example

@@ -0,0 +1,16 @@
+# This is an example of SMTP authentication
+#
+id           = 103
+type         = smtp
+name         = GMail
+is_activated = true
+
+[config]
+# Either "PLAIN" or "LOGIN"
+auth            = PLAIN
+host            = smtp.gmail.com
+port            = 587
+allowed_domains = 
+tls             = true
+skip_verify     = false
+

conf/gitignore/PhpStorm

@@ -0,0 +1,63 @@
+# Covers JetBrains IDEs: IntelliJ, RubyMine, PhpStorm, AppCode, PyCharm, CLion, Android Studio and Webstorm
+# Reference: https://intellij-support.jetbrains.com/hc/en-us/articles/206544839
+
+# User-specific stuff:
+.idea/**/workspace.xml
+.idea/**/tasks.xml
+.idea/dictionaries
+
+# Sensitive or high-churn files:
+.idea/**/dataSources/
+.idea/**/dataSources.ids
+.idea/**/dataSources.xml
+.idea/**/dataSources.local.xml
+.idea/**/sqlDataSources.xml
+.idea/**/dynamic.xml
+.idea/**/uiDesigner.xml
+
+# Gradle:
+.idea/**/gradle.xml
+.idea/**/libraries
+
+# CMake
+cmake-build-debug/
+
+# Mongo Explorer plugin:
+.idea/**/mongoSettings.xml
+
+## File-based project format:
+*.iws
+
+## Plugin-specific files:
+
+# IntelliJ
+/out/
+
+# mpeltonen/sbt-idea plugin
+.idea_modules/
+
+# JIRA plugin
+atlassian-ide-plugin.xml
+
+# Cursive Clojure plugin
+.idea/replstate.xml
+
+# Ruby plugin and RubyMine
+/.rakeTasks
+
+# Crashlytics plugin (for Android Studio and IntelliJ)
+com_crashlytics_export_strings.xml
+crashlytics.properties
+crashlytics-build.properties
+fabric.properties
+
+### PhpStorm Patch ###
+# Comment Reason: https://github.com/joeblau/gitignore.io/issues/186#issuecomment-215987721
+
+# *.iml
+# modules.xml
+# .idea/misc.xml
+# *.ipr
+
+# Sonarlint plugin
+.idea/sonarlint

conf/gitignore/UnrealEngine

@@ -0,0 +1,76 @@
+# Visual Studio 2015 user specific files
+.vs/
+
+# Compiled Object files
+*.slo
+*.lo
+*.o
+*.obj
+
+# Precompiled Headers
+*.gch
+*.pch
+
+# Compiled Dynamic libraries
+*.so
+*.dylib
+*.dll
+
+# Fortran module files
+*.mod
+
+# Compiled Static libraries
+*.lai
+*.la
+*.a
+*.lib
+
+# Executables
+*.exe
+*.out
+*.app
+*.ipa
+
+# These project files can be generated by the engine
+*.xcodeproj
+*.xcworkspace
+*.sln
+*.suo
+*.opensdf
+*.sdf
+*.VC.db
+*.VC.opendb
+
+# Precompiled Assets
+SourceArt/**/*.png
+SourceArt/**/*.tga
+
+# Binary Files
+Binaries/*
+Plugins/*/Binaries/*
+
+# Builds
+Build/*
+
+# Whitelist PakBlacklist-<BuildConfiguration>.txt files
+!Build/*/
+Build/*/**
+!Build/*/PakBlacklist*.txt
+
+# Don't ignore icon files in Build
+!Build/**/*.ico
+
+# Built data for maps
+*_BuiltData.uasset
+
+# Configuration files generated by the Editor
+Saved/*
+
+# Compiled source files for the engine to use
+Intermediate/*
+Plugins/*/Intermediate/*
+
+# Cache files for the editor to use
+DerivedDataCache/*
+
+

conf/gitignore/WebStorm

@@ -0,0 +1,63 @@
+# Covers JetBrains IDEs: IntelliJ, RubyMine, PhpStorm, AppCode, PyCharm, CLion, Android Studio and Webstorm
+# Reference: https://intellij-support.jetbrains.com/hc/en-us/articles/206544839
+
+# User-specific stuff:
+.idea/**/workspace.xml
+.idea/**/tasks.xml
+.idea/dictionaries
+
+# Sensitive or high-churn files:
+.idea/**/dataSources/
+.idea/**/dataSources.ids
+.idea/**/dataSources.xml
+.idea/**/dataSources.local.xml
+.idea/**/sqlDataSources.xml
+.idea/**/dynamic.xml
+.idea/**/uiDesigner.xml
+
+# Gradle:
+.idea/**/gradle.xml
+.idea/**/libraries
+
+# CMake
+cmake-build-debug/
+
+# Mongo Explorer plugin:
+.idea/**/mongoSettings.xml
+
+## File-based project format:
+*.iws
+
+## Plugin-specific files:
+
+# IntelliJ
+/out/
+
+# mpeltonen/sbt-idea plugin
+.idea_modules/
+
+# JIRA plugin
+atlassian-ide-plugin.xml
+
+# Cursive Clojure plugin
+.idea/replstate.xml
+
+# Ruby plugin and RubyMine
+/.rakeTasks
+
+# Crashlytics plugin (for Android Studio and IntelliJ)
+com_crashlytics_export_strings.xml
+crashlytics.properties
+crashlytics-build.properties
+fabric.properties
+
+### WebStorm Patch ###
+# Comment Reason: https://github.com/joeblau/gitignore.io/issues/186#issuecomment-215987721
+
+# *.iml
+# modules.xml
+# .idea/misc.xml
+# *.ipr
+
+# Sonarlint plugin
+.idea/sonarlint

conf/locale/TRANSLATORS

@@ -21,6 +21,7 @@ Barış Arda Yılmaz <ardayilmazgamer AT gmail DOT com>
 Bo-Yi Wu <appleboy DOT tw AT gmail DOT com>
 Breton Corentin <contact AT neodarz DOT net>
 Camille Baronnet <gogs AT camillebaronnet DOT fr>
+Changwoo Ryu <cwryu AT debian DOT org>
 Christoph Kisfeld <christoph DOT kisfeld AT gmail DOT com>
 Cysioland
 Damaris Padieu <damizx AT hotmail DOT fr>
@@ -31,6 +32,7 @@ Dmitriy Nogay <me AT catwhocode DOT ga>
 Enrico Testori hypertesto AT gmail DOT com
 Ezequiel Gonzalez Rial <gonrial AT gmail DOT com>
 Farhan Naysee <wpmagic70 AT gmail DOT com>
+Flávio Monteiro <flaviomonteiro2013 AT gmail DOT com>
 Gabriel Dugny <gabriel DOT dugny AT gmail DOT com>
 Ganesha <reekoheek AT gmail DOT com>
 Gregor Santner <gdev AT live DOT de>
@@ -54,9 +56,11 @@ Luc Stepniewski <luc AT stepniewski DOT fr>
 Łukasz Jan Niemier <lukasz AT niemier DOT pl>
 Marc Schiller <marc AT schiller DOT im>
 Marvin Menzerath <github AT marvin-menzerath DOT de>
+Mathias Rangel Wulff <m AT rawu DOT dk>
 Michael Härtl <haertl DOT mike AT gmail DOT com>
 Miguel de la Cruz <miguel AT mcrx DOT me>
 Mikhail Burdin <xdshot9000 AT gmail DOT com>
+Mohammad Gholami <gholami DOT mohammad DOT mgh AT gmail DOT com>
 Morten Sørensen <klim8d AT gmail DOT com>
 Muhammad Fawwaz Orabi <mfawwaz93 AT gmail DOT com>
 Nakao Takamasa <at.mattenn AT gmail DOT com>

conf/locale/locale_bg-BG.ini

@@ -48,7 +48,7 @@ cancel=Отказ
 install=Инсталация
 title=Стъпки за инсталиране при първоначално стартиране
 docker_helper=Ако Gogs е стартиран в Docker контейнер, моля прочетете <a target="_blank" href="%s">нашите указания</a> внимателно, преди да правите промени по настройките на тази страница!
-requite_db_desc=Gogs requires MySQL, PostgreSQL, SQLite3, MSSQL or TiDB.
+requite_db_desc=Gogs изисква MySQL, PostgreSQL, SQLite3 или TiDB.
 db_title=Настройки на базата данни
 db_type=Тип на база данни
 host=Сървър
@@ -58,8 +58,8 @@ db_name=Име на база данни
 db_helper=Моля, използвайте INNODB engine с utf8_general_ci кодиране на знаци за MySQL.
 ssl_mode=Режим SSL
 path=Път
-sqlite_helper=The file path of SQLite3 database. <br>Please use absolute path when you start as service.
-err_empty_db_path=SQLite3 database path cannot be empty.
+sqlite_helper=Път към файл на SQLite3 база от данни. <br>Моля използвайте абсолютен път, когато стартирате gogs като услуга.
+err_empty_db_path=Пътят към SQLite3 базата от данни не може да бъде празен.
 no_admin_and_disable_registration=Невъзможно изключване на регистрациите без предварително да е създаден поне един административен профил.
 err_empty_admin_password=Паролата на администратор не може да е празна.
 
@@ -74,16 +74,16 @@ domain=Домейн
 domain_helper=Тази настройка влияе на URL адреса за клониране чрез SSH.
 ssh_port=SSH порт
 ssh_port_helper=Номер на порт на SSH сървъра. Оставете празно за да изключите достъп през SSH.
-use_builtin_ssh_server=Use Builtin SSH Server
-use_builtin_ssh_server_popup=Start builtin SSH server for Git operations to distinguish from system SSH daemon.
+use_builtin_ssh_server=Използване на вграден SSH сървър
+use_builtin_ssh_server_popup=Стартиране на вграден SSH сървър за Git операции, различен от системния SSH демон.
 http_port=HTTP порт
 http_port_helper=Порт, на който приложението ще слуша.
 app_url=URL адрес на приложението
 app_url_helper=Този настройка променя HTTP/HTTPS адреса за клониране, а понякога и адреса на ел. поща.
 log_root_path=Път към журналите
 log_root_path_helper=Директория в която се записват журналите.
-enable_console_mode=Enable Console Mode
-enable_console_mode_popup=In addition to file mode, also print logs to console.
+enable_console_mode=Включване на конзолен режим
+enable_console_mode_popup=Изписване на логовете в конзолата, в допълнение към файловият режим.
 
 optional_title=Опционални настройки
 email_title=Настройки на пощенска услуга
@@ -119,7 +119,7 @@ sqlite3_not_available=Вашата версия не поддържа SQLite3,
 invalid_db_setting=Настройките на базата данни са некоректни: %v
 invalid_repo_path=Основният път към хранилищата е невалиден: %v
 run_user_not_match=Потребителският контекст на приложението не е на текущия потребител: %s -> %s
-smtp_host_missing_port=SMTP Host is missing port in address.
+smtp_host_missing_port=Липсва порт в зададения SMTP адрес.
 invalid_smtp_from=Невалидно поле От: %v
 save_config_failed=Неуспешно запазване на конфигурация: %v
 invalid_admin_setting=Настройките на профил на администратора са невалидни: %v
@@ -151,6 +151,8 @@ register_hepler_msg=Вече имате профил? Впишете се сег
 social_register_hepler_msg=Вече имате профил? Свържете се сега!
 disable_register_prompt=За съжаление създаването на нови регистрации е изключено. Обърнете се към администратора на сайта.
 disable_register_mail=За съжаление потвърждението на регистрации е изключено.
+auth_source=Authentication Source
+local=Local
 remember_me=Запомни ме
 forgot_password=Забравена парола
 forget_password=Забравена парола?
@@ -169,13 +171,13 @@ reset_password_helper=Щракнете тук, за да нулирате пар
 password_too_short=Размерът на паролата не може да бъде по-малък от 6 знака.
 non_local_account=Нелокални потребители не могат да сменят паролата си през Gogs.
 
-login_two_factor=Two-factor Authentication
-login_two_factor_passcode=Authentication Passcode
+login_two_factor=Двуфакторно удостоверяване
+login_two_factor_passcode=Парола за удостоверяване
 login_two_factor_enter_recovery_code=Enter a two-factor recovery code
 login_two_factor_recovery=Two-factor Recovery
-login_two_factor_recovery_code=Recovery Code
+login_two_factor_recovery_code=Код за възстановяване
 login_two_factor_enter_passcode=Enter a two-factor passcode
-login_two_factor_invalid_recovery_code=Recovery code has been used or does not valid.
+login_two_factor_invalid_recovery_code=Този код за възстановяване вече е бил използван или не е валиден.
 
 [mail]
 activate_account=Моля активирайте Вашия профил
@@ -229,6 +231,7 @@ org_name_been_taken=Името на организацията вече се п
 team_name_been_taken=Името на екипа вече се ползва.
 email_been_used=Този адрес на ел. поща вече се ползва.
 username_password_incorrect=Потребителското име или паролата не са верни.
+auth_source_mismatch=The authentication source selected is not associated with the user.
 enterred_invalid_repo_name=Моля уверете се, че въведеното име на хранилище е вярно.
 enterred_invalid_owner_name=Моля уверете се, че въведеното име на притежател е вярно.
 enterred_invalid_password=Моля уверете се, че въведената парола е вярна.
@@ -264,8 +267,8 @@ profile=Профил
 password=Парола
 avatar=Аватар
 ssh_keys=SSH ключове
-security=Security
-repos=Repositories
+security=Сигурност
+repos=Хранилища
 orgs=Организации
 applications=Приложения
 delete=Изтрий профил
@@ -335,25 +338,26 @@ key_state_desc=Този ключ е използван през последни
 token_state_desc=Този API ключ е използван през последните 7 дни
 
 two_factor=Two-factor Authentication
-two_factor_status=Status:
-two_factor_on=On
-two_factor_off=Off
-two_factor_enable=Enable
-two_factor_disable=Disable
+two_factor_status=Статус:
+two_factor_on=Вкл.
+two_factor_off=Изкл.
+two_factor_enable=Активиране
+two_factor_disable=Деактивиране
 two_factor_view_recovery_codes=View and save <a href="%s%s">your recovery codes</a> in a safe place. You can use them as passcode if you lose access to your authentication application.
 two_factor_http=For HTTP/HTTPS operations, you are no longer able to use plain username and password. Please create and use <a href="%[1]s%[2]s">Personal Access Token</a> as your credential, e.g. <code>%[3]s</code>.
 two_factor_enable_title=Enable Two-factor Authentication
 two_factor_scan_qr=Please use your authentication application to scan the image:
 two_factor_or_enter_secret=Or enter the secret:
-two_factor_then_enter_passcode=Then enter passcode:
-two_factor_verify=Verify
-two_factor_invalid_passcode=The passcode you entered is not valid, please try again!
+two_factor_then_enter_passcode=След това въведете паролата:
+two_factor_verify=Потвърждаване
+two_factor_invalid_passcode=Въведената парола е невалидна! Моля опитайте отново.
+two_factor_reused_passcode=The passcode you entered has already been used, please try another one!
 two_factor_enable_error=Enable Two-factor authentication failed: %v
 two_factor_enable_success=Two-factor authentication has enabled for your account successfully!
 two_factor_recovery_codes_title=Two-factor Authentication Recovery Codes
 two_factor_recovery_codes_desc=Recovery codes are used when you temporarily lose access to your authentication application. Each recovery code can only be used once, <b>please keep these codes in a safe place</b>.
-two_factor_regenerate_recovery_codes=Regenerate Recovery Codes
-two_factor_regenerate_recovery_codes_error=Regenerate recovery codes failed: %v
+two_factor_regenerate_recovery_codes=Ново генериране на кодове за възстановяване
+two_factor_regenerate_recovery_codes_error=Неуспешно генериране на кодове за възстановяване: %v
 two_factor_regenerate_recovery_codes_success=New recovery codes has been generated successfully!
 two_factor_disable_title=Disable Two-factor Authentication
 two_factor_disable_desc=Your account security level will decrease after disabled two-factor authentication. Do you want to continue?
@@ -375,10 +379,10 @@ orgs.none=Не сте член на никоя организация.
 orgs.leave_title=Напусни организация
 orgs.leave_desc=Ще загубите достъп до всички хранилища и екипи, след като напуснете организацията. Желаете ли да продължите?
 
-repos.leave=Leave
-repos.leave_title=Leave repository
+repos.leave=Напускане
+repos.leave_title=Напускане на хранилище
 repos.leave_desc=You will lose access to the repository after you left. Do you want to continue?
-repos.leave_success=You have left repository '%s' successfully!
+repos.leave_success=Вие успешно напуснахте хранилище "%s"!
 
 delete_account=Изтриване на собствения профил
 delete_prompt=Тази операция ще изтрие Вашия профил завинаги и тя <strong>НЕ МОЖЕ</strong> да бъде отменена в последствие!
@@ -417,6 +421,8 @@ mirror_last_synced=Последна синхр.
 watchers=Наблюдаващи
 stargazers=Харесващи
 forks=Разклонения
+repo_description_helper=Description of repository. Maximum 512 characters length.
+repo_description_length=Available characters
 
 form.reach_limit_of_creation=Притежателят е достигнал настроения лимит от %d брой хранилища.
 form.name_reserved=Името на хранилището '%s' е запазено.
@@ -450,7 +456,7 @@ quick_guide=Бърз справочник
 clone_this_repo=Клонирай хранилището
 create_new_repo_command=Създай ново хранилище чрез командния ред
 push_exist_repo=Предай съществуващо хранилище през командния ред
-bare_message=This repository does not have any content yet.
+bare_message=Това хранилище все още не съдържа нищо.
 
 files=Файлове
 branch=Клон
@@ -463,7 +469,7 @@ pulls=Заявки за сливане
 labels=Етикети
 milestones=Етапи
 commits=Ревизии
-git_branches=Branches
+git_branches=Клонове
 releases=Версии
 file_raw=Директен файл
 file_history=История
@@ -472,12 +478,12 @@ file_permalink=Постоянна връзка
 file_too_large=Този файл е твърде голям за да се визуализира
 video_not_supported_in_browser=Вашият браузър не поддържа HTML5 видео тагове.
 
-branches.overview=Overview
-branches.active_branches=Active Branches
-branches.stale_branches=Stale Branches
-branches.all=All Branches
-branches.updated_by=Updated %[1]s by %[2]s
-branches.change_default_branch=Change Default Branch
+branches.overview=Преглед
+branches.active_branches=Активни клонове
+branches.stale_branches=Застинали клонове
+branches.all=Всички клонове
+branches.updated_by=Актуализирани %[1]s от %[2]s
+branches.change_default_branch=Промяна на клон по подразбиране
 
 editor.new_file=Нов файл
 editor.upload_file=Качи файл
@@ -514,6 +520,7 @@ editor.file_changed_while_editing=Съдържанието на файла е б
 editor.file_already_exists=Файл с име '%s' вече съществува в това хранилище.
 editor.no_changes_to_show=Няма промени.
 editor.fail_to_update_file=Невъзможно модифициране/създаване на файл '%s' заради грешка: %v
+editor.fail_to_delete_file=Failed to delete file '%s' with error: %v
 editor.add_subdir=Добави поддиректория...
 editor.unable_to_upload_files=Невъзможно качване на файлове в '%s' заради грешка: %v
 editor.upload_files_to_dir=Качи файлове в '%s'
@@ -616,6 +623,7 @@ pulls.compare_compare=сравни
 pulls.filter_branch=Филтър по клон
 pulls.no_results=Няма резултати.
 pulls.nothing_to_compare=Няма нищо за сравняване, защото родителският клон и върхът са еднакви.
+pulls.nothing_merge_base=Няма нищо за сравняване, защото двата клона имат напълно различна история.
 pulls.has_pull_request=`Вече има заявка за сливане между тези две цели: <a href="%[1]s/pulls/%[3]d">%[2]s#%[3]d</a>`
 pulls.create=Създай заявка за сливане
 pulls.title_desc=заяви обединяване на %[1]d ревизии от <code>%[2]s</code> във <code>%[3]s</code>
@@ -631,6 +639,9 @@ pulls.is_checking=Проверката за конфликт все още е в
 pulls.can_auto_merge_desc=Може да се извърши обединяване на тази заявка за сливане.
 pulls.cannot_auto_merge_desc=Не може да се извърши обединяване, защото съществуват конфликти между ревизиите.
 pulls.cannot_auto_merge_helper=Моля, използвайте инструменти на командния ред за да разрешите конфликтите.
+pulls.create_merge_commit=Create a merge commit
+pulls.rebase_before_merging=Rebase before merging
+pulls.commit_description=Commit Description
 pulls.merge_pull_request=Обедини заявка за сливане
 pulls.open_unmerged_pull_exists=`Невъзможно повторно отваряне, защото вече съществува заявка за сливане (#%d) от същото хранилище със същата информация за обединяване, която чака да бъде извършена`
 pulls.delete_branch=Изтрий клон
@@ -685,28 +696,28 @@ settings.collaboration.admin=За администрация
 settings.collaboration.write=За писане
 settings.collaboration.read=За четене
 settings.collaboration.undefined=Недефинирано
-settings.branches=Branches
+settings.branches=Клонове
 settings.branches_bare=You cannot manage branches for bare repository. Please push some content first.
-settings.default_branch=Default Branch
+settings.default_branch=Клон по подразбиране
 settings.default_branch_desc=The default branch is considered the "base" branch for code commits, pull requests and online editing.
 settings.update=Update
-settings.update_default_branch_unsupported=Change default branch is not supported by the Git version on server.
+settings.update_default_branch_unsupported=Промяна на клон по подразбиране не се поддържа от тази версия на Git сървъра.
 settings.update_default_branch_success=Default branch of this repository has been updated successfully!
-settings.protected_branches=Protected Branches
+settings.protected_branches=Защитени клонове
 settings.protected_branches_desc=Protect branches from force pushing, accidental deletion and whitelist code committers.
-settings.choose_a_branch=Choose a branch...
-settings.branch_protection=Branch Protection
+settings.choose_a_branch=Избор на клон...
+settings.branch_protection=Защита на клон
 settings.branch_protection_desc=Please choose protect options for branch <b>%s</b>.
 settings.protect_this_branch=Protect this branch
 settings.protect_this_branch_desc=Disable force pushes and prevent from deletion.
 settings.protect_require_pull_request=Require pull request instead direct pushing
 settings.protect_require_pull_request_desc=Enable this option to disable direct pushing to this branch. Commits have to be pushed to another non-protected branch and merged to this branch through pull request.
-settings.protect_whitelist_committers=Whitelist who can push to this branch
+settings.protect_whitelist_committers=Списък на всички, които могат да изпращат към този клон
 settings.protect_whitelist_committers_desc=Add people or teams to whitelist of direct push to this branch. Users in whitelist will bypass require pull request check.
-settings.protect_whitelist_users=Users who can push to this branch
-settings.protect_whitelist_search_users=Search users
+settings.protect_whitelist_users=Потребители, които могат да изпращат към този клон
+settings.protect_whitelist_search_users=Търсене на потребители
 settings.protect_whitelist_teams=Teams for which members of them can push to this branch
-settings.protect_whitelist_search_teams=Search teams
+settings.protect_whitelist_search_teams=Търсене на екипи
 settings.update_protect_branch_success=Protect options for this branch has been updated successfully!
 settings.hooks=Уеб-куки
 settings.githooks=Git куки
@@ -735,7 +746,9 @@ settings.tracker_issue_style=Стил на именуване на външна
 settings.tracker_issue_style.numeric=Цифров
 settings.tracker_issue_style.alphanumeric=Символен
 settings.tracker_url_format_desc=Можете да използвате текстови маркери <code>{user} {repo} {index}</code> за потребителско име, име на хранилище и индекс на задача съответно.
-settings.pulls_desc=Включва заявки за сливане за да може да се приемат външни доработки
+settings.pulls_desc=Enable pull requests to accept contributions between repositories and branches
+settings.pulls.ignore_whitespace=Ignore changes in whitespace
+settings.pulls.allow_rebase_merge=Allow use rebase to merge commits
 settings.danger_zone=Опасна зона
 settings.cannot_fork_to_same_owner=You cannot fork a repository to its original owner.
 settings.new_owner_has_same_repo=Новият притежател вече има хранилище със същото име. Изберете друго име.
@@ -756,7 +769,7 @@ settings.wiki_deletion_success=Данните за уики на това хра
 settings.delete=Изтрий това хранилище
 settings.delete_desc=След като изтриете хранилището, няма връщане назад. Моля, бъдете сигурни.
 settings.delete_notices_1=- Тази операция <strong>НЕ МОЖЕ</strong> да бъде отменена в последствие.
-settings.delete_notices_2=- Тази операция ще изтрие всичко от това хранилище, включително Git данни, задачи, коментари и достъпа на сътрудници.
+settings.delete_notices_2=- This operation will permanently delete everything in this repository, including Git data, issues, comments and collaborator access.
 settings.delete_notices_fork_1=- Всички разклонения ще станат независими след изтриването.
 settings.deletion_success=Хранилището е изтрито успешно!
 settings.update_settings_success=Настройките на хранилището са запазени успешно.
@@ -806,18 +819,18 @@ settings.event_send_everything=При <strong>всички</strong> събити
 settings.event_choose=Нека избера от какво имам нужда.
 settings.event_create=Създаване
 settings.event_create_desc=Създаване на клон или маркер
-settings.event_delete=Delete
-settings.event_delete_desc=Branch or tag deleted
+settings.event_delete=Изтриване
+settings.event_delete_desc=Изтрит клон или етикет
 settings.event_fork=Fork
 settings.event_fork_desc=Repository forked
 settings.event_push=Предаване
 settings.event_push_desc=Git предаване към хранилището
 settings.event_issues=Issues
 settings.event_issues_desc=Issue opened, closed, reopened, edited, assigned, unassigned, label updated, label cleared, milestoned, or demilestoned.
-settings.event_issue_comment=Issue Comment
-settings.event_issue_comment_desc=Issue comment created, edited, or deleted.
 settings.event_pull_request=Заявка за сливане
 settings.event_pull_request_desc=Pull request opened, closed, reopened, edited, assigned, unassigned, label updated, label cleared, milestoned, demilestoned, or synchronized.
+settings.event_issue_comment=Issue Comment
+settings.event_issue_comment_desc=Issue comment created, edited, or deleted.
 settings.event_release=Release
 settings.event_release_desc=Release published in a repository.
 settings.active=Активна
@@ -829,7 +842,8 @@ settings.delete_webhook=Изтрий уеб-куката
 settings.recent_deliveries=Последни изпращания
 settings.hook_type=Тип на куката
 settings.add_slack_hook_desc=Добавяне на интеграция със <a href="%s">Slack</a> във Вашето хранилище.
-settings.add_discord_hook_desc=Add <a href="%s">Discord</a> integration to your repository.
+settings.add_discord_hook_desc=Добавяне на интеграция с <a href="%s">Discord</a> към хранилището.
+settings.add_dingtalk_hook_desc=Добавяне на интеграция с <a href="%s">Dingtalk</a> към хранилището.
 settings.slack_token=API ключ
 settings.slack_domain=Домейн
 settings.slack_channel=Канал
@@ -846,6 +860,8 @@ settings.add_key_success=Новият ключ за внедряване '%s' е
 settings.deploy_key_deletion=Изтрий ключ за внедряване
 settings.deploy_key_deletion_desc=При изтриването на този ключ за внедряване ще се премахнат свързаните права за достъп до това хранилище. Желаете ли да продължите?
 settings.deploy_key_deletion_success=Ключът за внедряване е изтрит успешно!
+settings.description_desc=Description of repository. Maximum 512 characters length.
+settings.description_length=Available characters
 
 diff.browse_source=Преглед на файлове
 diff.parent=родител
@@ -912,7 +928,7 @@ team_permission_desc=Какво ниво на достъп трябва да и
 
 form.name_reserved=Името на организацията '%s' е запазено.
 form.name_pattern_not_allowed=Име на организацията от вида '%s' не е разрешено.
-form.team_name_reserved=Team name '%s' is reserved.
+form.team_name_reserved=Име на екип "%s" е запазено.
 
 settings=Настройки
 settings.options=Опции
@@ -1079,13 +1095,14 @@ repos.private=Частно
 repos.watches=Наблюдавания
 repos.stars=Харесвания
 repos.issues=Задачи
-repos.size=Size
+repos.size=Размер
 
-auths.auth_manage_panel=Управление на удостоверявания
+auths.auth_sources=Authentication Sources
 auths.new=Добави нов начин на удостоверяване
 auths.name=Име
 auths.type=Тип
 auths.enabled=Активно
+auths.default=Default
 auths.updated=Последна модификация
 auths.auth_type=Тип на удостоверяване
 auths.auth_name=Име на удостоверяване
@@ -1094,6 +1111,7 @@ auths.domain=Домейн
 auths.host=Сървър
 auths.port=Порт
 auths.bind_dn=Име (DN) за свръзка
+auths.bind_dn_helper=You can use '%s' as placeholder for username, e.g. DOM\%s
 auths.bind_password=Парола за свръзка
 auths.bind_password_helper=Внимание: Тази парола се запазва некриптирана. Моля използвайте потребител, който няма административен достъп.
 auths.user_base=Базов OU за търсене
@@ -1121,9 +1139,9 @@ auths.enable_tls=Включи TLS криптиране
 auths.skip_tls_verify=Пропусни проверка на TLS сертификат
 auths.pam_service_name=Име на PAM услуга
 auths.enable_auto_register=Включи автоматична регистрация
-auths.tips=Съвети
 auths.edit=Редактирай настройки за удостоверяване
 auths.activated=Това удостоверяване е активно
+auths.default_auth=This authentication is default login source
 auths.new_success=Новото удостоверяване '%s' е добавено успешно.
 auths.update_success=Настройките за удостоверяване са запазени успешно.
 auths.update=Запази настройки за удостоверяване
@@ -1134,6 +1152,7 @@ auths.still_in_used=Това удостоверяване все още се и
 auths.deletion_success=Удостоверяването е изтрито успешно!
 auths.login_source_exist=Източник за валидация на потребители "%s" вече съществува.
 
+config.not_set=(not set)
 config.server_config=Сървърни настройки
 config.app_name=Име на приложението
 config.app_ver=Версия на приложението
@@ -1155,21 +1174,25 @@ config.ssh_domain=Домейн
 config.ssh_port=Порт
 config.ssh_listen_port=Порт за слушане
 config.ssh_root_path=Основен път
+config.ssh_rewrite_authorized_keys_at_start=Rewrite authorized_keys At Start
 config.ssh_key_test_path=Път до ключове
 config.ssh_keygen_path=Път до генератор ('ssh-keygen')
 config.ssh_minimum_key_size_check=Проверка за минимален размер на ключове
 config.ssh_minimum_key_sizes=Минимален размер на ключове
 
-config.repo_config=Repository Configuration
+config.repo_config=Конфигурация на хранилище
 config.repo_root_path=Основен път към хранилища
 config.script_type=Тип на скрипта
 config.repo_force_private=Force Private
 config.max_creation_limit=Max Creation Limit
-config.preferred_licenses=Preferred Licenses
-config.disable_http_git=Disable HTTP Git
+config.preferred_licenses=Предпочитани лицензи
+config.disable_http_git=Забраняване на HTTP Git
 config.enable_local_path_migration=Enable Local Path Migration
 config.commits_fetch_concurrency=Commits Fetch Concurrency
 
+config.http_config=Конфигуриране на HTTP
+config.http_access_control_allow_origin=Access Control Allow Origin
+
 config.db_config=Настройки на базата данни
 config.db_type=Тип
 config.db_host=Сървър
@@ -1199,7 +1222,7 @@ config.skip_tls_verify=Пропусни проверка на TLS
 config.mailer_config=Конфигурация на мейлър
 config.mailer_enabled=Активен
 config.mailer_disable_helo=Изключи HELO
-config.mailer_name=Име
+config.mailer_subject_prefix=Subject Prefix
 config.mailer_host=Сървър
 config.mailer_user=Потребител
 config.send_test_mail=Изпрати тестово писмо
@@ -1242,8 +1265,8 @@ config.git_pull_timeout=Време за отказ при сливане
 config.git_gc_timeout=Време за отказ при GC
 
 config.log_config=Конфигурация на журнал
-config.log_mode=Mode
-config.log_options=Options
+config.log_mode=Режим
+config.log_options=Настройки
 
 monitor.cron=Cron задачи
 monitor.name=Име
@@ -1272,7 +1295,6 @@ notices.delete_success=Системните съобщения са изтрит
 
 [action]
 create_repo=създаде хранилище <a href="%s"> %s</a>
-fork_repo=forked a repository to <a href="%s">%s</a>
 rename_repo=преименува хранилище от <code>%[1]s</code> на <a href="%[2]s">%[3]s</a>
 commit_repo=предаде към <a href="%[1]s/src/%[2]s">%[3]s</a> в <a href="%[1]s">%[4]s</a>
 compare_commits=Сравнение между тези %d ревизии
@@ -1285,10 +1307,14 @@ create_pull_request=`създаде заявка за сливане <a href="%s
 close_pull_request=`затвори заявка за сливане <a href="%s/pulls/%s">%s#%[2]s</a>`
 reopen_pull_request=`повторно отвори заявка за сливане <a href="%s/pulls/%s">%s#%[2]s</a>`
 merge_pull_request=`обедини заявка за сливане <a href="%s/pulls/%s">%s#%[2]s</a>`
-create_branch=created new branch <a href="%[1]s/src/%[2]s">%[3]s</a> at <a href="%[1]s">%[4]s</a>
-delete_branch=deleted branch <code>%[2]s</code> at <a href="%[1]s">%[3]s</a>
+create_branch=създаде клон <a href="%[1]s/src/%[2]s"> %[3]s</a> % <a href="%[1]s">[4]s</a>
+delete_branch=изтри клон <code>%[2]s</code> % <a href="%[1]s">[3]s</a>
 push_tag=предаде маркер <a href="%s/src/%s">%[2]s</a> към <a href="%[1]s">[3]s</a>
-delete_tag=deleted tag <code>%[2]s</code> at <a href="%[1]s">%[3]s</a>
+delete_tag=изтри етикет <code>%[2]s</code> % <a href="%[1]s">[3]s</a>
+fork_repo=forked a repository to <a href="%s">%s</a>
+mirror_sync_push=synced commits to <a href="%[1]s/src/%[2]s">%[3]s</a> at <a href="%[1]s">%[4]s</a> from mirror
+mirror_sync_create=synced new reference <a href="%s/src/%s">%[2]s</a> to <a href="%[1]s">%[3]s</a> from mirror
+mirror_sync_delete=synced and deleted reference <code>%[2]s</code> at <a href="%[1]s">%[3]s</a> from mirror
 
 [tool]
 ago=преди

conf/locale/locale_cs-CZ.ini

@@ -23,10 +23,10 @@ password=Heslo
 re_type=Znovu zadat
 captcha=CAPTCHA
 
-repository=Repositář
+repository=Repozitář
 organization=Organizace
 mirror=Zrcadlo
-new_repo=Nový repositář
+new_repo=Nový repozitář
 new_migrate=Nové přenesení
 new_mirror=Nové zrcadlo
 new_fork=Nový repositář rozštěpení
@@ -56,7 +56,7 @@ user=Uživatel
 password=Heslo
 db_name=Název databáze
 db_helper=Prosím, pro MySQL použijte INNODB engine se znakovou sadou utf8_general_ci.
-ssl_mode=SSL Mód
+ssl_mode=SSL režim
 path=Cesta
 sqlite_helper=Cesta k SQLite3 databázi. <br>Prosím, použijte absolutní cestu, pokud startujete Gogs jako službu.
 err_empty_db_path=Cesta k SQLite3 databázi nemůže být prázdná.
@@ -149,22 +149,24 @@ search=Vyhledat
 create_new_account=Vytvořit nový účet
 register_hepler_msg=Již máte účet? Přihlašte se!
 social_register_hepler_msg=Již máte účet? Připojte se!
-disable_register_prompt=Omlouvám se, ale registrace jsou vypnuty. Prosím, spojte se správcem systému.
-disable_register_mail=Omlouvám se, e-mailové služby byly vypnuty. Prosím, spojte se správce serveru.
+disable_register_prompt=Omlouváme se, ale registrace jsou vypnuty. Kontaktujte správce systému.
+disable_register_mail=Omlouváme se, ale e-mailové služby jsou vypnuté. Kontaktujte správce systému.
+auth_source=Zdroj ověření
+local=Lokální
 remember_me=Zapamatovat si mne
 forgot_password=Zapomenuté heslo
 forget_password=Zapomněli jste heslo?
 sign_up_now=Potřebujete účet? Zaregistrujte se.
-confirmation_mail_sent_prompt=Nový potvrzovací e-mail byl zaslán na <b>%s</b>, prosím, zkontrolujte si vaši doručenou poštu během následující %d hodin pro dokončení registračního procesu.
+confirmation_mail_sent_prompt=Na adresu <b>%s</b> byl zaslán nový potvrzovací e-mail. Zkontrolujte prosím vaši doručenou poštu během následujících %d hodin pro dokončení registračního procesu.
 active_your_account=Aktivujte si váš účet
 prohibit_login=Přihlášení zakázáno
 prohibit_login_desc=Vašemu účtu je zakázáno se přihlásit, kontaktujte prosím správce serveru.
-resent_limit_prompt=Omlouvám se, ale před chvílí jste požádal o aktivační e-mail. Prosím, počkejte 3 minuty a pak to zkuste znovu.
+resent_limit_prompt=Omlouváme se, ale před chvílí jste požádal o zaslání aktivačního e-mailu. Počkejte prosím 3 minuty a pak to zkuste znovu.
 has_unconfirmed_mail=Zdravím, %s, máte nepotvrzenou e-mailovou adresu (<b>%s</b>). Pokud jste nedostali potvrzovací e-mail nebo potřebujete zaslat nový, klikněte prosím na tlačítko níže.
-resend_mail=Klikněte zde pro odeslání aktivačního e-mailu
-send_reset_mail=Klikněte zde pro (znovu)poslání e-mailu pro změnu vašeho hesla
+resend_mail=Klikněte zde pro opakované odeslání aktivačního e-mailu
+send_reset_mail=Klikněte zde pro (opakované) odeslání e-mailu pro obnovu vašeho hesla
 reset_password=Obnova vašeho hesla
-invalid_code=Omlouvám se, ale kód potvrzení vašeho e-mailu vypršel nebo není správný.
+invalid_code=Omlouváme se, ale kód z vašeho potvrzovacího e-mailu už vypršel nebo není správný.
 reset_password_helper=Klikněte zde pro obnovu vašeho hesla
 password_too_short=Délka hesla musí být minimálně 6 znaků.
 non_local_account=Externí účty nemohou měnit hesla přes Gogs.
@@ -175,7 +177,7 @@ login_two_factor_enter_recovery_code=Zadejte obnovovací kód dvoufaktorového o
 login_two_factor_recovery=Obnovení dvoufaktorového ověření
 login_two_factor_recovery_code=Obnovovací kód
 login_two_factor_enter_passcode=Zadejte přístupový kód dvoufaktorového ověření
-login_two_factor_invalid_recovery_code=Obnovovací kód byl již použit nebo není platný.
+login_two_factor_invalid_recovery_code=Obnovovací kód již byl použit nebo není platný.
 
 [mail]
 activate_account=Prosím, aktivujte si váš účet
@@ -195,7 +197,7 @@ RepoName=Název repositáře
 Email=E-mailová adresa
 Password=Heslo
 Retype=Zadejte znovu heslo
-SSHTitle=Název klíče SSH
+SSHTitle=Název SSH klíče
 HttpsUrl=HTTPS URL
 PayloadUrl=URL nákladu
 TeamName=Název týmu
@@ -210,18 +212,18 @@ TreeName=Cesta k souboru
 Content=Obsah
 
 require_error=` nemůže být prázdný.`
-alpha_dash_error=` musí být pouze písmena, číslice či znaky - a _ .`
-alpha_dash_dot_error=` musí být pouze písmena, číslice, tečka, čárka či znaky - a _ .`
-alpha_dash_dot_slash_error=` musí být validní písmena, čísla nebo pomlčka, podtržítko či tečka, čárka a nebo lomítka.`
-size_error=` musí být minimálně velikosti %s.`
+alpha_dash_error=` smí obsahovat pouze písmena, číslice, pomlčku a podtržítko.`
+alpha_dash_dot_error=` smí obsahovat pouze písmena, číslice, tečku, čárku, pomlčku a podtržítko.`
+alpha_dash_dot_slash_error=` smí obsahovat pouze písmena, číslice, tečku, čárku, pomlčku, podtržítko a lomítko.`
+size_error=` musí mít velikost %s.`
 min_size_error=` musí obsahovat nejméně %s znaků.`
 max_size_error=` musí obsahovat maximálně %s znaků.`
-email_error=` není správná e-mailová adresa.`
-url_error=` není správná URL.`
+email_error=` není platná e-mailová adresa.`
+url_error=` není platná URL.`
 include_error=` musí obsahovat řetězec '%s'.`
 unknown_error=Neznámá chyba:
 captcha_incorrect=Zadaná CAPTCHA se neshoduje.
-password_not_match=Heslo a heslo pro potvrzení nejsou shodné.
+password_not_match=Heslo a jeho potvrzení se neshodují.
 
 username_been_taken=Uživatelské jméno je již obsazeno.
 repo_name_been_taken=Název repositáře je již obsazen.
@@ -229,26 +231,27 @@ org_name_been_taken=Název organizace je již obsazen.
 team_name_been_taken=Název týmu je již obsazen.
 email_been_used=E-mailová adresa je již použita.
 username_password_incorrect=Chybné uživatelské jméno nebo heslo.
+auth_source_mismatch=Vybraný zdroj ověření není propojen s uživatelem.
 enterred_invalid_repo_name=Ujistěte se, prosím, že zadaný název repositáře je správný.
 enterred_invalid_owner_name=Ujistěte se, prosím, že jméno vlastníka je zadáno správně.
 enterred_invalid_password=Ujistěte se, prosím, že zadané heslo je správné.
 user_not_exist=Zadaný uživatel neexistuje.
-last_org_owner=Odstranění posledního uživatele z týmu vlastníka není dovoleno, neboť vždy musí v každé organizaci existovat jeden vlastník.
+last_org_owner=Odstranění posledního uživatele z týmu vlastníků není dovoleno, protože každá organizace musí mít alespoň jednoho vlastníka.
 
-invalid_ssh_key=Omlouvám se, ale není možné ověřit váš klíč SSH: %s
-unable_verify_ssh_key=Gogs nemohl ověřit váš klíč SSH, ale předpokládáme, že je platný, nicméně zkontrolujte jej prosím.
+invalid_ssh_key=Omlouváme se, ale váš SSH klíč není možné ověřit: %s
+unable_verify_ssh_key=Gogs nemohl ověřit váš SSH klíč, ale budeme předpokládat, že je platný. Přesto ho prosím zkontrolujte.
 auth_failed=Ověření selhalo: %v
 
-still_own_repo=Váš účet stále vlastní minimálně jeden repositář. Musíte je nejdříve smazat nebo předat.
-still_has_org=Váš účet je stále členem minimálně jedné organizace. Je nutné ji nejdříve opustit nebo smazat vaše členství.
+still_own_repo=Váš účet stále vlastní nějaké repositáře. Nejdříve je musíte smazat nebo někomu předat.
+still_has_org=Váš účet je stále členem nějaké organizace. Je nutné ji nejdříve opustit nebo se vzdát členství.
 org_still_own_repo=Tato organizace stále vlastní repositáře, musíte je nejdříve smazat nebo předat.
 
 target_branch_not_exist=Cílová větev neexistuje.
 
 [user]
 change_avatar=Změnit vaši uživatelskou ikonu
-join_on=Připojil se dne
-repositories=Repositáře
+join_on=Zaregistroval se dne
+repositories=Repozitáře
 activity=Veřejná aktivita
 followers=Sledující
 starred=Oblíbené repositáře
@@ -263,7 +266,7 @@ form.name_pattern_not_allowed=Vzor uživatelského jména '%s' není povolen.
 profile=Profil
 password=Heslo
 avatar=Uživatelská ikona
-ssh_keys=Klíče SSH
+ssh_keys=SSH klíče
 security=Bezpečnost
 repos=Repositáře
 orgs=Organizace
@@ -314,20 +317,20 @@ add_email=Přidat e-mailovou adresu
 add_email_confirmation_sent=Nový potvrzovací e-mail byl odeslán na adresu '%s', prosím zkontrolujte si vaši doručenou poštu během následujících %d hodin pro dokončení procesu potvrzení.
 add_email_success=Vaše nová e-mailová adresa byla přidána.
 
-manage_ssh_keys=Správa klíčů SSH
+manage_ssh_keys=Správa SSH klíčů
 add_key=Přidat klíč
-ssh_desc=Toto je seznam klíčů SSH vašeho účtu. Jelikož tyto samotné klíče umožňují přístup k vašim repositářům, je velmi důležité, abyste je rozpoznal.
-ssh_helper=<strong>Nevíte jak?</strong> Podívejte se do příručky GitHubu na to <a href="%s">vytvoření vlastních klíčů SSH</a> nebo vyřešte <a href="%s">bežné problémy</a>, se kterými se můžete potkat při použití SSH.
-add_new_key=Přidat klíč SSH
+ssh_desc=Toto je seznam SSH klíčů vašeho účtu. Jelikož SSH klíče umožňují komukoliv plný přístup k vašim repositářům, je velmi důležité, abyste si byli jistí, že jsou skutečně vaše.
+ssh_helper=<strong>Nevíte jak?</strong> Podívejte se do příručky GitHubu jak si <a href="%s">vytvořit vlastní SSH klíč</a>, nebo na <a href="%s">řešení častých problémů</a>, na které můžete narazit při používání SSH.
+add_new_key=Přidat SSH klíč
 ssh_key_been_used=Obsah veřejného klíče byl použit.
 ssh_key_name_used=Veřejný klíč se stejným jménem již existuje.
 key_name=Název klíče
 key_content=Obsah
-add_key_success=Nový klíč SSH '%s' byl přidán!
+add_key_success=Byl přidán nový SSH klíč '%s'!
 delete_key=Smazat
-ssh_key_deletion=Smazání klíče SSH
+ssh_key_deletion=Smazání SSH klíče
 ssh_key_deletion_desc=Smazání tohoto klíče SSH odstraní všechny související přístupy k vašemu účtu. Chcete pokračovat?
-ssh_key_deletion_success=Klíč SSH byl smazán!
+ssh_key_deletion_success=SSH klíč byl úspěšně smazán!
 add_on=Přidán dne
 last_used=Naposledy použit dne
 no_activity=Žádná aktuální aktivita
@@ -348,6 +351,7 @@ two_factor_or_enter_secret=Nebo zadejte tajný kód:
 two_factor_then_enter_passcode=Pak zadejte přístupový kód:
 two_factor_verify=Ověřit
 two_factor_invalid_passcode=Zadaný přístupový kód není platný, prosím, zkuste to znova!
+two_factor_reused_passcode=Kód, který jste zadali už byl použit. Prosím, zkuste jiný!
 two_factor_enable_error=Povolení dvoufaktorového ověření selhalo: %v
 two_factor_enable_success=Dvoufaktorové ověření bylo pro váš účet povoleno!
 two_factor_recovery_codes_title=Obnovovací kódy dvoufaktorového ověření
@@ -417,6 +421,8 @@ mirror_last_synced=Naposledy synchronizováno
 watchers=Sledující
 stargazers=Sledující
 forks=Rozštěpení
+repo_description_helper=Popis repozitáře. Maximální délka 512 znaků.
+repo_description_length=Dostupné znaky
 
 form.reach_limit_of_creation=Vlastník dosáhl maximálního počtu %d vytvořených repositořů.
 form.name_reserved=Název repositáře '%s' je rezervován.
@@ -459,7 +465,7 @@ filter_branch_and_tag=Filtr pro větev nebo značku
 branches=Větve
 tags=Značky
 issues=Úkoly
-pulls=Požadavky na natažení
+pulls=Pull Requesty
 labels=Štítky
 milestones=Milníky
 commits=Revize
@@ -514,6 +520,7 @@ editor.file_changed_while_editing=Obsah souboru se změnil od začátku úprav.
 editor.file_already_exists=Soubor '%s' již v tomto repositáři existuje.
 editor.no_changes_to_show=Žádné změny k zobrazení.
 editor.fail_to_update_file=Vytvoření nebo změna souboru '%s' skončila chybou: %v
+editor.fail_to_delete_file=Failed to delete file '%s' with error: %v
 editor.add_subdir=Přidat podadresář...
 editor.unable_to_upload_files=Nepodařilo se nahrát soubor do '%s'. Chyba: %v
 editor.upload_files_to_dir=Nahrát soubory do '%s'
@@ -616,6 +623,7 @@ pulls.compare_compare=porovnat
 pulls.filter_branch=Filtrovat větev
 pulls.no_results=Nebyly nalezeny žádné výsledky.
 pulls.nothing_to_compare=Není co porovnávat, protože základ a hlavní větve jsou shodné.
+pulls.nothing_merge_base=Není co porovnávat, protože tyto dvě větve mají úplně jinou historii.
 pulls.has_pull_request=`Požadavek na natažení mezi těmito větvemi již existuje: <a href="%[1]s/pulls/%[3]d">%[2]s#%[3]d</a>`
 pulls.create=Vytvořit požadavek na natažení
 pulls.title_desc=chce sloučit %[1]d revizí z větve <code>%[2]s</code> do větve <code>%[3]s</code>
@@ -631,6 +639,9 @@ pulls.is_checking=Kontrola rozporů stále pokračuje, prosím obnovte za někol
 pulls.can_auto_merge_desc=Tento požadavek na natažení může být automaticky sloučen.
 pulls.cannot_auto_merge_desc=Tento požadavek na natažení nemůže být automaticky sloučen, neboť se v něm nachází rozpory.
 pulls.cannot_auto_merge_helper=Prosím proveďte sloučení ručně, aby byly vyřešeny rozpory.
+pulls.create_merge_commit=Vytvořit slučovací commit
+pulls.rebase_before_merging=Rebase before merging
+pulls.commit_description=Popis Commitu
 pulls.merge_pull_request=Sloučit požadavek na natažení
 pulls.open_unmerged_pull_exists=`Nemůžete znovuotevřít požadavek na natažení, neboť požadavek na natažení ze stejného repositáře se stejnými informacemi pro sloučení již existuje (#%d) a čeká na sloučení.`
 pulls.delete_branch=Smazat větev
@@ -735,7 +746,9 @@ settings.tracker_issue_style=Styl pojmenování úkolů v externím systému úk
 settings.tracker_issue_style.numeric=Číselný
 settings.tracker_issue_style.alphanumeric=Alfanumerický
 settings.tracker_url_format_desc=Můžete použít zástupné výrazy <code>{user} {repo} {index}</code> pro uživatelské jméno, název repositáře a číslo úkolu.
-settings.pulls_desc=Povolit požadavky na natažení, aby mohly být příspěvky veřejnosti akceptovány
+settings.pulls_desc=Enable pull requests to accept contributions between repositories and branches
+settings.pulls.ignore_whitespace=Ignorovat změny v netisknutelných znacích
+settings.pulls.allow_rebase_merge=Povolit použití reabse pro slučovací commity
 settings.danger_zone=Nebezpečná zóna
 settings.cannot_fork_to_same_owner=Nemůžete rozštěpit repositář jejímu vlastníkovi.
 settings.new_owner_has_same_repo=Nový vlastník již repositář se stejným názvem má. Vyberte, prosím, jiné jméno.
@@ -814,10 +827,10 @@ settings.event_push=Odeslat
 settings.event_push_desc=Odeslání pomocí Gitu do repositáře
 settings.event_issues=Úkoly
 settings.event_issues_desc=Úkol, který je otevřen, uzavřen, znovuotevřen, změněn, přiřazen, nepřiřazen, mající změněn štítek, smazán štítek, mající přiřazen milník, nemající přiřazen milník.
-settings.event_issue_comment=Komentář k úkolu
-settings.event_issue_comment_desc=Komentář k úkolu vytvořen, upraven nebo smazán.
 settings.event_pull_request=Požadavek na natažení
 settings.event_pull_request_desc=Požadavek na natažení otevřen, uzavřen, znovuotevřen, změněn, přiřazen, nepřiřazen, změněn štítek, smazán štítek, mající nastaven štítek, zrušeno nastavení štítku nebo synchronizován.
+settings.event_issue_comment=Komentář k úkolu
+settings.event_issue_comment_desc=Komentář k úkolu vytvořen, upraven nebo smazán.
 settings.event_release=Vydání
 settings.event_release_desc=Vydání vystaveno v repositáři.
 settings.active=Aktivní
@@ -830,13 +843,14 @@ settings.recent_deliveries=Nedávné dodávky
 settings.hook_type=Typ háčku
 settings.add_slack_hook_desc=Přidat integraci <a href="%s">Slacku</a> do vašeho repositáře.
 settings.add_discord_hook_desc=Přidat integraci <a href="%s">Discord</a> do vašeho repositáře.
+settings.add_dingtalk_hook_desc=Přidat integraci <a href="%s">Dingtalk</a> do vašeho repositáře.
 settings.slack_token=Poukázka
 settings.slack_domain=Doména
 settings.slack_channel=Kanál
 settings.deploy_keys=Klíče pro nasazení
 settings.deploy_keys_helper=<b>Přichycen při činu!</b> Pokud chcete přidat osobní veřejné klíče, zadejte je prosím v <a href="%s%s">nastavení vašeho účtu</a>.
 settings.add_deploy_key=Přidat klíč pro nasazení
-settings.deploy_key_desc=Klíče pro nasazení mají pouze přístup ke čtení. Nejsou stejné jako osobní klíče SSH.
+settings.deploy_key_desc=Klíče pro nasazení mají pouze přístup ke čtení. Nejsou stejné jako SSH klíče osobního účtu.
 settings.no_deploy_keys=Žádné klíče pro nasazení nebyly ještě přidány.
 settings.title=Název
 settings.deploy_key_content=Obsah
@@ -846,6 +860,8 @@ settings.add_key_success=Nový klíč pro nasazení '%s' byl přidán!
 settings.deploy_key_deletion=Smazat klíč pro nasazení
 settings.deploy_key_deletion_desc=Smazání toho klíče pro nasazení smaže také veškerý k němu svázaný přístup do tohoto repositáře. Chcete pokračovat?
 settings.deploy_key_deletion_success=Klíč pro nasazení byl smazán!
+settings.description_desc=Description of repository. Maximum 512 characters length.
+settings.description_length=Dostupné znaky
 
 diff.browse_source=Procházet zdrojové kódy
 diff.parent=rodič
@@ -901,7 +917,7 @@ people=Lidé
 invite_someone=Přizvěte někoho
 teams=Týmy
 lower_members=členové
-lower_repositories=repositáře
+lower_repositories=repozitáře
 create_new_team=Vytvořit nový tým
 org_desc=Popis
 team_name=Název týmu
@@ -965,9 +981,9 @@ teams.delete_team_success=Daný tým byl smazán.
 teams.read_permission_desc=Členství v tom týmu poskytuje právo <strong>čtení</strong>: členové mohou číst z a vytvářet klony repositářů týmu.
 teams.write_permission_desc=Členství v tom týmu poskytuje právo <strong>zápisu</strong>: členové mohou číst z a odesílat do repositářů týmu.
 teams.admin_permission_desc=Členství v tom týmu poskytuje právo <strong>správce</strong>: členové mohou číst z, odesílat do a přidávat spolupracovníky do repositářů týmu.
-teams.repositories=Repositáře týmu
+teams.repositories=Repozitáře týmu
 teams.search_repo_placeholder=Hledat repositář...
-teams.add_team_repository=Přidat repositář týmu
+teams.add_team_repository=Přidat repozitář týmu
 teams.remove_repo=Odstranit
 teams.add_nonexistent_repo=Repositář, který se snažíte přidat, neexistuje. Nejdříve jej vytvořte, prosím.
 
@@ -975,7 +991,7 @@ teams.add_nonexistent_repo=Repositář, který se snažíte přidat, neexistuje.
 dashboard=Přehled
 users=Uživatelé
 organizations=Organizace
-repositories=Repositáře
+repositories=Repozitáře
 authentication=Způsoby ověření
 config=Nastavení
 notices=Systémová oznámení
@@ -1081,11 +1097,12 @@ repos.stars=Oblíbení
 repos.issues=Úkoly
 repos.size=Velikost
 
-auths.auth_manage_panel=Panel správy způsobů ověřování
+auths.auth_sources=Zdroje ověření
 auths.new=Přidat nový zdroj
 auths.name=Název
 auths.type=Typ
 auths.enabled=Povolený
+auths.default=Výchozí
 auths.updated=Změněné
 auths.auth_type=Typ ověření
 auths.auth_name=Název ověření
@@ -1094,20 +1111,21 @@ auths.domain=Doména
 auths.host=Server
 auths.port=Port
 auths.bind_dn=Připojení DN
+auths.bind_dn_helper=Můžete použít '%s' jako zástupný znak pro uživatelské jméno, například DOM\%s
 auths.bind_password=Heslo připojení
 auths.bind_password_helper=Upozornění: Toto heslo je ukládáno nešifrované. Nepoužívejte pro správcovské účty.
 auths.user_base=Výchozí místo hledání uživatelů
 auths.user_dn=DN uživatele
-auths.attribute_username=Uživatelské jméno
+auths.attribute_username=Atribut uživatelského jména
 auths.attribute_username_placeholder=Nechte toto pole prázdné pro použití hodnoty pole uživatelského jména z přihlašovacího formuláře.
-auths.attribute_name=First Name Attribute
-auths.attribute_surname=Příjmení
-auths.attribute_mail=E-mailová adresa
-auths.verify_group_membership=Verify group membership
-auths.group_search_base_dn=Group Search Base DN
-auths.group_filter=Group Filter
-auths.group_attribute_contain_user_list=Group Attribute Containing List of Users
-auths.user_attribute_listed_in_group=User Attribute Listed in Group
+auths.attribute_name=Atribut křestního jména
+auths.attribute_surname=Atribut příjmení
+auths.attribute_mail=Atribut e-mailové adresy
+auths.verify_group_membership=Ověřovat členství ve skupině
+auths.group_search_base_dn=Základní DN pro vyhledávání skupin
+auths.group_filter=Skupinový filtr
+auths.group_attribute_contain_user_list=Skupinový atribut, který obsahuje seznam uživatelů
+auths.user_attribute_listed_in_group=Atribut uživatele (ve skupině)
 auths.attributes_in_bind=Vyzvednout atributy v kontextu Bind DN
 auths.filter=Uživatelský filtr
 auths.admin_filter=Správcovský filtr
@@ -1121,9 +1139,9 @@ auths.enable_tls=Povolit šifrování TLS
 auths.skip_tls_verify=Přeskočit ověření TLS
 auths.pam_service_name=Název služby PAM
 auths.enable_auto_register=Povolit zaregistrování se
-auths.tips=Tipy
 auths.edit=Upravit nastavení ověřování
 auths.activated=Tento způsob ověřování je aktivní
+auths.default_auth=This authentication is default login source
 auths.new_success=Nový způsob ověřování '%s' byl přidán.
 auths.update_success=Nastavení ověřování bylo změněno.
 auths.update=Změnit nastavení ověřování
@@ -1134,6 +1152,7 @@ auths.still_in_used=Tento způsob ověřování je stále používán některým
 auths.deletion_success=Způsob ověřování byl smazán!
 auths.login_source_exist=Zdroj přihlášení '%s' již existuje.
 
+config.not_set=(není nastaveno)
 config.server_config=Nastavení serveru
 config.app_name=Název aplikace
 config.app_ver=Verze aplikace
@@ -1155,6 +1174,7 @@ config.ssh_domain=Doména
 config.ssh_port=Port
 config.ssh_listen_port=Port pro naslouchání
 config.ssh_root_path=Kořenová cesta
+config.ssh_rewrite_authorized_keys_at_start=Přepsat authorized_keys při startu
 config.ssh_key_test_path=Cesta testu klíčů
 config.ssh_keygen_path=Cesta ke generátoru klíčů ('ssh-keygen')
 config.ssh_minimum_key_size_check=Kontrola minimální velikosti klíčů
@@ -1170,12 +1190,15 @@ config.disable_http_git=Vypnout HTTP Git
 config.enable_local_path_migration=Povolit migraci z místní cesty
 config.commits_fetch_concurrency=Souběžnost vyzvednutí revizí
 
+config.http_config=Nastavení HTTP
+config.http_access_control_allow_origin=Access Control Allow Origin
+
 config.db_config=Nastavení databáze
 config.db_type=Typ
 config.db_host=Server
 config.db_name=Název
 config.db_user=Uživatel
-config.db_ssl_mode=Režim SSL
+config.db_ssl_mode=SSL režim
 config.db_ssl_mode_helper=(pouze pro 'postgres')
 config.db_path=Cesta
 config.db_path_helper=(pro "sqlite3" a "tidb")
@@ -1199,7 +1222,7 @@ config.skip_tls_verify=Přeskočit ověření TLS
 config.mailer_config=Nastavení odesílání e-mailů
 config.mailer_enabled=Povolený
 config.mailer_disable_helo=Vypnout HELO
-config.mailer_name=Název
+config.mailer_subject_prefix=Subject Prefix
 config.mailer_host=Server
 config.mailer_user=Uživatel
 config.send_test_mail=Odeslat zkušební E-mail
@@ -1272,7 +1295,6 @@ notices.delete_success=Systémová upozornění byla smazána.
 
 [action]
 create_repo=vytvořil repositář <a href="%s">%s</a>
-fork_repo=rozštěpil repositář do <a href="%s">%s</a>
 rename_repo=přejmenoval repositář z <code>%[1]s</code> na <a href="%[2]s">%[3]s</a>
 commit_repo=odeslal do větve <a href="%[1]s/src/%[2]s">%[3]s</a> v repositáři <a href="%[1]s">%[4]s</a>
 compare_commits=Zobrazit porovnání pro tyto %d revize
@@ -1289,6 +1311,10 @@ create_branch=vytvořil novou větev <a href="%[1]s/src/%[2]s">%[3]s</a> v <a hr
 delete_branch=smazal větev <code>%[2]s</code> v <a href="%[1]s">%[3]s</a>
 push_tag=odeslal značku <a href="%s/src/%s">%[2]s</a> do repositáře <a href="%[1]s">%[3]s</a>
 delete_tag=smazána značka <code>%[2]s</code> v <a href="%[1]s">%[3]s</a>
+fork_repo=rozštěpil repositář do <a href="%s">%s</a>
+mirror_sync_push=synced commits to <a href="%[1]s/src/%[2]s">%[3]s</a> at <a href="%[1]s">%[4]s</a> from mirror
+mirror_sync_create=synced new reference <a href="%s/src/%s">%[2]s</a> to <a href="%[1]s">%[3]s</a> from mirror
+mirror_sync_delete=synced and deleted reference <code>%[2]s</code> at <a href="%[1]s">%[3]s</a> from mirror
 
 [tool]
 ago=před

conf/locale/locale_de-DE.ini

@@ -151,6 +151,8 @@ register_hepler_msg=Haben Sie bereits ein Konto? Jetzt anmelden!
 social_register_hepler_msg=Haben Sie bereits ein Konto? Jetzt verknüpfen!
 disable_register_prompt=Es tut uns leid, die Registrierung wurde deaktiviert. Bitte wenden Sie sich an den Administrator.
 disable_register_mail=Es tut uns leid, die Bestätigung der Registrierungs-E-Mail wurde deaktiviert.
+auth_source=Authentifizierungsquelle
+local=Lokalisierung
 remember_me=Angemeldet bleiben
 forgot_password=Passwort vergessen
 forget_password=Passwort vergessen?
@@ -229,6 +231,7 @@ org_name_been_taken=Organisationsname ist bereits vergeben.
 team_name_been_taken=Teamname ist bereits vergeben.
 email_been_used=E-Mail-Adresse wird bereits verwendet.
 username_password_incorrect=Benutzername oder Passwort ist nicht korrekt.
+auth_source_mismatch=Die ausgewählte Authentifizierungsquelle ist dem Benutzer nicht zugeordnet.
 enterred_invalid_repo_name=Bitte achten Sie darauf, dass der von Ihnen eingegebene Repository-Name korrekt ist.
 enterred_invalid_owner_name=Bitte achten Sie darauf, dass der eingegebene Name des Besitzers korrekt ist.
 enterred_invalid_password=Bitte achten Sie darauf, dass das eingegebene Passwort richtig ist.
@@ -319,7 +322,7 @@ add_key=Schlüssel hinzufügen
 ssh_desc=Dies ist eine Liste aller SSH-Schlüssel, die Ihrem Konto zugeordnet sind. Bitte entfernen Sie alle Schlüssel, die Ihnen nicht bekannt sind.
 ssh_helper=<strong>Brauchen Sie Hilfe?</strong> Hier ist eine Anleitung zum <a href="%s">Erzeugen von SSH-Schlüsseln</a> oder <a href="%s">Lösen einfacher SSH-Probleme</a>.
 add_new_key=SSH-Schlüssel hinzufügen
-ssh_key_been_used=Inhalt des öffentlichen Schlüssels wurde verwendet.
+ssh_key_been_used=Inhalt des öffentlichen Schlüssels wurde bereits verwendet.
 ssh_key_name_used=Ein öffentlicher Schlüssel mit diesem Namen existiert bereits.
 key_name=Schlüsselname
 key_content=Inhalt
@@ -348,6 +351,7 @@ two_factor_or_enter_secret=Oder geben Sie Ihren Geheim-Code ein:
 two_factor_then_enter_passcode=Geben Sie die PIN ein:
 two_factor_verify=Bestätigen
 two_factor_invalid_passcode=Die eingegebene PIN ist ungültig. Bitte versuchen Sie es erneut!
+two_factor_reused_passcode=Der von dir eingegebene Passcode wurde bereits verwendet, bitte probiere einen anderen!
 two_factor_enable_error=Einschalten der Zwei-Faktor-Authentifizierung ist fehlgeschlagen: %v
 two_factor_enable_success=Die Zwei-Faktor-Authentifizierung wurde für Ihr Konto erfolgreich aktiviert!
 two_factor_recovery_codes_title=Zwei-Faktor-Authentifizierung-Wiederherstellungscodes
@@ -417,6 +421,8 @@ mirror_last_synced=Zuletzt synchronisiert
 watchers=Beobachter
 stargazers=In Favoriten von
 forks=Forks
+repo_description_helper=Beschreibung des Repository. Maximal 512 Zeichen.
+repo_description_length=Verfügbare Zeichen
 
 form.reach_limit_of_creation=Der Besitzer hat die maximale Anzahl von %d erstellbaren Repositories erreicht.
 form.name_reserved=Repository-Name '%s' ist reserviert.
@@ -450,7 +456,7 @@ quick_guide=Kurzanleitung
 clone_this_repo=Dieses Repository klonen
 create_new_repo_command=Erstellen Sie ein neues Repository mittels der Kommandozeile
 push_exist_repo=Bestehendes Repository von der Kommandozeile pushen
-bare_message=Dies Repository hat noch keinen Inhalt.
+bare_message=Dieses Repository hat noch keinen Inhalt.
 
 files=Dateien
 branch=Branch
@@ -514,6 +520,7 @@ editor.file_changed_while_editing=Seit dem Start der Bearbeitung hat sich die Da
 editor.file_already_exists=Eine Datei mit dem Namen '%s' existiert bereits in diesem Repository.
 editor.no_changes_to_show=Keine Änderungen vorhanden.
 editor.fail_to_update_file=Fehler beim Ändern/Erstellen der Datei '%s'. Fehler: %v
+editor.fail_to_delete_file=Fehler beim Löschen der Datei '%s'. Fehler: %v
 editor.add_subdir=Unterverzeichnis erstellen...
 editor.unable_to_upload_files=Fehler beim Hochladen der Dateien zu '%s'. Fehler: %v
 editor.upload_files_to_dir=Dateien hochladen nach '%s'
@@ -616,6 +623,7 @@ pulls.compare_compare=vergleichen
 pulls.filter_branch=Branch filtern
 pulls.no_results=Keine Ergebnisse verfügbar.
 pulls.nothing_to_compare=Es gibt nichts zu vergleichen, da Base- und Head-Branch gleich sind.
+pulls.nothing_merge_base=Es gibt nichts zu vergleichen, da beide Zweige eine komplett unterschiedliche Historie haben.
 pulls.has_pull_request=`Es existiert bereits ein Pull-Request zwischen diesen beiden Zielen: <a href="%[1]s/pulls/%[3]d">%[2]s#%[3]d</a>`
 pulls.create=Pull-Request erstellen
 pulls.title_desc=möchte %[1]d Commits von <code>%[2]s</code> nach <code>%[3]s</code> zusammenführen
@@ -631,6 +639,9 @@ pulls.is_checking=Die Konfliktprüfung läuft noch. Bitte aktualisieren Sie die
 pulls.can_auto_merge_desc=Dieser Pull-Request kann automatisch zusammengeführt werden.
 pulls.cannot_auto_merge_desc=Dieser Pull-Request kann nicht automatisch zusammengeführt werden, da es Konflikte gibt.
 pulls.cannot_auto_merge_helper=Bitte manuell zusammenführen, um die Konflikte zu lösen.
+pulls.create_merge_commit=Erstelle einen Merge-Commit
+pulls.rebase_before_merging=Rebase vor dem Zusammenführen
+pulls.commit_description=Commit Beschreibung
 pulls.merge_pull_request=Pull-Request zusammenführen
 pulls.open_unmerged_pull_exists=`Sie können diesen Pull-Request nicht wieder öffnen, da bereits ein offener Pull-Request (#%d) aus dem selben Repository mit den gleichen Merge-Informationen existiert und auf das Zusammenführen wartet.`
 pulls.delete_branch=Zweig löschen
@@ -641,8 +652,8 @@ milestones.open_tab=%d offen
 milestones.close_tab=%d geschlossen
 milestones.closed=Geschlossen %s
 milestones.no_due_date=Kein Fälligkeitsdatum
-milestones.open=Offen
-milestones.close=Geschlossen
+milestones.open=Öffnen
+milestones.close=Schließen
 milestones.new_subheader=Erstellen Sie Meilensteine, um ihre Issues zu organisieren.
 milestones.create=Meilenstein erstellen
 milestones.title=Titel
@@ -735,7 +746,9 @@ settings.tracker_issue_style=Namenskonvention des externen Issue-Trackers:
 settings.tracker_issue_style.numeric=Numerisch
 settings.tracker_issue_style.alphanumeric=Alphanumerisch
 settings.tracker_url_format_desc=Sie können die Platzhalter <code>{user} {repo} {index}</code> für den Benutzernamen, den Namen des Repositories und die Issue-Nummer verwenden.
-settings.pulls_desc=Pull-Requests aktivieren, um öffentliche Mitwirkung zu ermöglichen
+settings.pulls_desc=Erlaube Pull-Requests zur Zusammenarbeit von Repositories und Branches
+settings.pulls.ignore_whitespace=Ignoriere whitespace Änderungen
+settings.pulls.allow_rebase_merge=Die Verwendung von Rebase erlauben, um Commits zu mergen
 settings.danger_zone=Gefahrenzone
 settings.cannot_fork_to_same_owner=Besitzer kann das Repository nicht forken.
 settings.new_owner_has_same_repo=Der neue Eigentümer hat bereits ein Repository mit dem gleichen Namen. Bitte wählen Sie einen anderen Namen.
@@ -745,12 +758,12 @@ settings.convert_notices_1=- Dieser Vorgang wandelt das Mirror-Repository in ein
 settings.convert_confirm=Umwandlung bestätigen
 settings.convert_succeed=Das Repository wurde erfolgreich in ein normales Repository umgewandelt.
 settings.transfer=Besitz übertragen
-settings.transfer_desc=Dieses Repository auf einen anderen Benutzer bzw. eine Organisation in der Sie Admin-Rechte haben übertragen.
+settings.transfer_desc=Dieses Repository auf einen anderen Benutzer oder eine Organisation, in der Sie Admin-Rechte haben, übertragen.
 settings.transfer_notices_1=- Sie werden keinen Zugriff mehr haben, wenn der neue Besitzer ein individueller Benutzer ist.
 settings.transfer_notices_2=- Sie werden weiterhin Zugriff haben, wenn der neue Besitzer eine Organisation ist und Sie einer der Besitzer sind.
 settings.transfer_form_title=Bitte geben Sie die folgenden Informationen ein, um die Operation zu bestätigen:
 settings.wiki_delete=Wiki-Daten löschen
-settings.wiki_delete_desc=Das Löschen von Wiki Daten kann nicht rückgängig gemacht werden. Bitte seien Sie vorsichtig.
+settings.wiki_delete_desc=Das Löschen von Wiki-Daten kann nicht rückgängig gemacht werden. Bitte seien Sie vorsichtig.
 settings.wiki_delete_notices_1=- Dies löscht und deaktiviert das Wiki für %s
 settings.wiki_deletion_success=Repository Wiki Daten erfolgreich gelöscht.
 settings.delete=Dieses Repository löschen
@@ -814,10 +827,10 @@ settings.event_push=Push
 settings.event_push_desc=Git push auf ein Repository
 settings.event_issues=Issues
 settings.event_issues_desc=Issue geöffnet, geschlossen, wieder geöffnet, bearbeitet, zugewiesen, nicht zugewiesen, Label aktualisiert, Label gelöscht, einem Meilenstein zugewiesen oder davon entfernt.
-settings.event_issue_comment=Issue-Kommentar
-settings.event_issue_comment_desc=Issue-Kommentar angelegt, geändert oder gelöscht.
 settings.event_pull_request=Pull-Request
 settings.event_pull_request_desc=Pull-Request geöffnet, geschlossen, wieder geöffnet, bearbeitet, zugewiesen, nicht zugewiesen, Label aktualisiert, Label gelöscht, einem Meilenstein zugewiesen, davon entfernt oder synchronisiert.
+settings.event_issue_comment=Issue-Kommentar
+settings.event_issue_comment_desc=Issue-Kommentar angelegt, geändert oder gelöscht.
 settings.event_release=Release
 settings.event_release_desc=Release in Repository veröffentlicht.
 settings.active=Aktiv
@@ -830,6 +843,7 @@ settings.recent_deliveries=Letzte Zustellungen
 settings.hook_type=Hook Typ
 settings.add_slack_hook_desc=Fügen Sie <a href="%s">Slack</a>-Integration zu Ihrem Repository hinzu.
 settings.add_discord_hook_desc=Fügen Sie <a href="%s">Discord</a>-Integration zu Ihrem Repository hinzu.
+settings.add_dingtalk_hook_desc=<a href="%s">Dingtalk</a>-Integration zu deinem Repository hinzufügen.
 settings.slack_token=Token
 settings.slack_domain=Domain
 settings.slack_channel=Kanal
@@ -846,6 +860,8 @@ settings.add_key_success=Der Deploy-Schlüssel '%s' wurde erfolgreich hinzugefü
 settings.deploy_key_deletion=Deploy-Schlüssel löschen
 settings.deploy_key_deletion_desc=Nach dem Löschen dieses Deploy-Schlüssels werden entsprechende Zugriffe auf dieses Repository nicht mehr möglich sein. Möchten Sie wirklich fortfahren?
 settings.deploy_key_deletion_success=Deploy-Schlüssel wurde erfolgreich gelöscht!
+settings.description_desc=Beschreibung des Repository. Maximal 512 Zeichen.
+settings.description_length=Verfügbare Zeichen
 
 diff.browse_source=Quellcode durchsuchen
 diff.parent=Ursprung
@@ -1003,7 +1019,7 @@ dashboard.git_gc_repos=Garbage Collection auf Repositories ausführen
 dashboard.git_gc_repos_success=Garbage Collection wurde auf allen Repositories erfolgreich ausgeführt.
 dashboard.resync_all_sshkeys=Datei '.ssh/authorized_keys' neu anlegen (Achtung: Schlüssel, die nicht zu Gogs gehören gehen verloren)
 dashboard.resync_all_sshkeys_success=Alle öffentlichen Keys wurden erfolgreich neu geschrieben.
-dashboard.resync_all_hooks=Synchronisiere pre-receive, update und post-receive Hooks für alle Repositorien
+dashboard.resync_all_hooks=Synchronisiere pre-receive, update und post-receive Hooks für alle Repositories
 dashboard.resync_all_hooks_success=Pre-receive, update und post-receive Hooks aller Repositorien wurden erfolgreich synchronisiert.
 dashboard.reinit_missing_repos=Alle Repository-Datensätze mit verloren gegangenen Git-Dateien neu initialisieren
 dashboard.reinit_missing_repos_success=Alle Repository-Datensätze, die Git-Dateien verloren haben wurden erfolgreich neu initialisiert.
@@ -1081,11 +1097,12 @@ repos.stars=Favoriten
 repos.issues=Issues
 repos.size=Größe
 
-auths.auth_manage_panel=Authentifizierung
+auths.auth_sources=Authentifizierungsquelle
 auths.new=Neue Quelle hinzufügen
 auths.name=Name
 auths.type=Typ
 auths.enabled=Aktiviert
+auths.default=Standard
 auths.updated=Aktualisiert
 auths.auth_type=Authentifizierungstyp
 auths.auth_name=Authentifizierungsname
@@ -1094,6 +1111,7 @@ auths.domain=Domain
 auths.host=Host
 auths.port=Port
 auths.bind_dn=DN binden
+auths.bind_dn_helper=Sie können "%s" als Platzhalter für den Benutzernamen einsetzen, z.B. DOM\%s
 auths.bind_password=Passwort binden
 auths.bind_password_helper=Achtung: Das Passwort wird im Klartext gespeichert. Benutzen Sie kein Konto mit hoher Berechtigungsstufe.
 auths.user_base=Basis für Benutzersuche
@@ -1121,9 +1139,9 @@ auths.enable_tls=TLS-Verschlüsselung aktivieren
 auths.skip_tls_verify=TLS-Prüfung überspringen
 auths.pam_service_name=PAM Dienstname
 auths.enable_auto_register=Automatische Registrierung aktivieren
-auths.tips=Tipps
 auths.edit=Authentifizierungseinstellungen bearbeiten
 auths.activated=Diese Authentifizierung ist aktiv
+auths.default_auth=Diese Authentifizierungsmethode ist die Vorgabe
 auths.new_success=Neue Authentifizierung '%s' wurde erfolgreich hinzugefügt.
 auths.update_success=Die Authentifizierungseinstellungen wurden erfolgreich aktualisiert.
 auths.update=Authentifizierungseinstellungen aktualisieren
@@ -1134,6 +1152,7 @@ auths.still_in_used=Diese Authentifizierung wird noch von einigen Benutzern verw
 auths.deletion_success=Authentifizierung wurde erfolgreich gelöscht!
 auths.login_source_exist=Login-Quelle '%s' ist bereits vorhanden.
 
+config.not_set=(nicht festgelegt)
 config.server_config=Serverkonfiguration
 config.app_name=Name der Anwendung
 config.app_ver=Anwendungsversion
@@ -1155,6 +1174,7 @@ config.ssh_domain=Domain
 config.ssh_port=Port
 config.ssh_listen_port=Listen Port
 config.ssh_root_path=Verzeichnis
+config.ssh_rewrite_authorized_keys_at_start=Beim Start authorized_keys umschreiben
 config.ssh_key_test_path=Schlüssel-Test-Pfad
 config.ssh_keygen_path=Keygen ('ssh-keygen') Pfad
 config.ssh_minimum_key_size_check=Prüfung der Mindestschlüssellänge
@@ -1170,6 +1190,9 @@ config.disable_http_git=Deaktiviere HTTP-Git
 config.enable_local_path_migration=Erlaube Migration von lokalem Pfad
 config.commits_fetch_concurrency=Anzahl gleichzeitiger Commit-/Fetch-Prozesse
 
+config.http_config=HTTP-Konfiguration
+config.http_access_control_allow_origin=Access Control Allow Origin
+
 config.db_config=Datenbankkonfiguration
 config.db_type=Typ
 config.db_host=Host
@@ -1199,7 +1222,7 @@ config.skip_tls_verify=TLS verifikation überspringen
 config.mailer_config=Mailer-Konfiguration
 config.mailer_enabled=Aktiviert
 config.mailer_disable_helo=HELO Deaktivieren
-config.mailer_name=Name
+config.mailer_subject_prefix=Betreff-Präfix
 config.mailer_host=Host
 config.mailer_user=Benutzer
 config.send_test_mail=Test-E-Mail senden
@@ -1272,7 +1295,6 @@ notices.delete_success=Systemmitteilungen wurden erfolgreich gelöscht.
 
 [action]
 create_repo=hat das Repository <a href="%s">%s</a> erstellt
-fork_repo=hat das Repository nach <a href="%s">%s</a> geforkt
 rename_repo=hat das Repository von <code>%[1]s</code> zu <a href="%[2]s">%[3]s</a> umbenannt
 commit_repo=hat auf <a href="%[1]s/src/%[2]s">%[3]s</a> in <a href="%[1]s">%[4]s</a> gepusht
 compare_commits=Zeige Vergleich für diese %d Commits
@@ -1284,11 +1306,15 @@ comment_issue=`hat Issue <a href="%s/issues/%s">%s#%[2]s</a> kommentiert`
 create_pull_request=`hat Pull-Request <a href="%s/pulls/%s">%s#%[2]s</a> erstellt`
 close_pull_request=`hat Pull-Request <a href="%s/pulls/%s">%s#%[2]s</a> geschlossen`
 reopen_pull_request=`hat den Pull-Request <a href="%s/pulls/%s">%s#%[2]s</a> wieder geöffnet`
-merge_pull_request=`hat Pull-Request <a href="%s/pulls/%s">%s#%[2]s</a> zuammengeführt`
+merge_pull_request=`hat Pull-Request <a href="%s/pulls/%s">%s#%[2]s</a> zusammengeführt`
 create_branch=hat neuen Branch <a href="%[1]s/src/%[2]s">%[3]s</a> in <a href="%[1]s">%[4]s</a> angelegt
 delete_branch=hat Branch <code>%[2]s</code> in <a href="%[1]s">%[3]s</a> gelöscht
 push_tag=hat Tag <a href="%s/src/%s">%[2]s</a> auf <a href="%[1]s">%[3]s</a> gepusht
 delete_tag=hat Tag <code>%[2]s</code> in <a href="%[1]s">%[3]s</a> gelöscht
+fork_repo=hat das Repository nach <a href="%s">%s</a> geforkt
+mirror_sync_push=hat auf <a href="%[1]s/src/%[2]s">%[3]s</a> in <a href="%[1]s">%[4]s</a> gepusht
+mirror_sync_create=synced new reference <a href="%s/src/%s">%[2]s</a> to <a href="%[1]s">%[3]s</a> from mirror
+mirror_sync_delete=synced and deleted reference <code>%[2]s</code> at <a href="%[1]s">%[3]s</a> from mirror
 
 [tool]
 ago=vor

conf/locale/locale_en-GB.ini

@@ -151,6 +151,8 @@ register_hepler_msg=Already have an account? Sign in now!
 social_register_hepler_msg=Already have an account? Bind now!
 disable_register_prompt=Sorry, registration has been disabled. Please contact the site administrator.
 disable_register_mail=Sorry, Register Mail Confirmation has been disabled.
+auth_source=Authentication Source
+local=Local
 remember_me=Remember Me
 forgot_password=Forgot Password
 forget_password=Forgot password?
@@ -229,6 +231,7 @@ org_name_been_taken=Organisation name has already been taken.
 team_name_been_taken=Team name has already been taken.
 email_been_used=Email address has already been used.
 username_password_incorrect=Username or password is not correct.
+auth_source_mismatch=The authentication source selected is not associated with the user.
 enterred_invalid_repo_name=Please make sure that the repository name you have entered is correct.
 enterred_invalid_owner_name=Please make sure that the owner name you have entered is correct.
 enterred_invalid_password=Please make sure the that password you have entered is correct.
@@ -348,6 +351,7 @@ two_factor_or_enter_secret=Or enter the secret:
 two_factor_then_enter_passcode=Then enter passcode:
 two_factor_verify=Verify
 two_factor_invalid_passcode=The passcode you entered is not valid, please try again!
+two_factor_reused_passcode=The passcode you entered has already been used, please try another one!
 two_factor_enable_error=Enable Two-factor authentication failed: %v
 two_factor_enable_success=Two-factor authentication has enabled for your account successfully!
 two_factor_recovery_codes_title=Two-factor Authentication Recovery Codes
@@ -417,6 +421,8 @@ mirror_last_synced=Last Synced
 watchers=Watchers
 stargazers=Stargazers
 forks=Forks
+repo_description_helper=Description of repository. Maximum 512 characters length.
+repo_description_length=Available characters
 
 form.reach_limit_of_creation=The owner has reached maximum creation limit of %d repositories.
 form.name_reserved=Repository name '%s' is reserved.
@@ -514,6 +520,7 @@ editor.file_changed_while_editing=File content has been changed since you starte
 editor.file_already_exists=A file with name '%s' already exists in this repository.
 editor.no_changes_to_show=There are no changes to show.
 editor.fail_to_update_file=Failed to update/create file '%s' with error: %v
+editor.fail_to_delete_file=Failed to delete file '%s' with error: %v
 editor.add_subdir=Add subdirectory...
 editor.unable_to_upload_files=Failed to upload files to '%s' with error: %v
 editor.upload_files_to_dir=Upload files to '%s'
@@ -616,6 +623,7 @@ pulls.compare_compare=compare
 pulls.filter_branch=Filter branch
 pulls.no_results=No results found.
 pulls.nothing_to_compare=There is nothing to compare because base and head branches are even.
+pulls.nothing_merge_base=There is nothing to compare because two branches have completely different history.
 pulls.has_pull_request=`There is already a pull request between these two targets: <a href="%[1]s/pulls/%[3]d">%[2]s#%[3]d</a>`
 pulls.create=Create Pull Request
 pulls.title_desc=wants to merge %[1]d commits from <code>%[2]s</code> into <code>%[3]s</code>
@@ -631,6 +639,9 @@ pulls.is_checking=The conflict checking is still in progress, please refresh pag
 pulls.can_auto_merge_desc=This pull request can be merged automatically.
 pulls.cannot_auto_merge_desc=This pull request can't be merged automatically because there are conflicts.
 pulls.cannot_auto_merge_helper=Please merge manually in order to resolve the conflicts.
+pulls.create_merge_commit=Create a merge commit
+pulls.rebase_before_merging=Rebase before merging
+pulls.commit_description=Commit Description
 pulls.merge_pull_request=Merge Pull Request
 pulls.open_unmerged_pull_exists=`You can't perform reopen operation because there is already an open pull request (#%d) from same repository with same merge information and is waiting for merging.`
 pulls.delete_branch=Delete Branch
@@ -735,7 +746,9 @@ settings.tracker_issue_style=External Issue Tracker Naming Style:
 settings.tracker_issue_style.numeric=Numeric
 settings.tracker_issue_style.alphanumeric=Alphanumeric
 settings.tracker_url_format_desc=You can use placeholder <code>{user} {repo} {index}</code> for user name, repository name and issue index.
-settings.pulls_desc=Enable pull requests to accept public contributions
+settings.pulls_desc=Enable pull requests to accept contributions between repositories and branches
+settings.pulls.ignore_whitespace=Ignore changes in whitespace
+settings.pulls.allow_rebase_merge=Allow use rebase to merge commits
 settings.danger_zone=Danger Zone
 settings.cannot_fork_to_same_owner=You cannot fork a repository to its original owner.
 settings.new_owner_has_same_repo=The new owner already has a repository with same name. Please choose another name.
@@ -756,7 +769,7 @@ settings.wiki_deletion_success=Repository wiki data have been erased successfull
 settings.delete=Delete This Repository
 settings.delete_desc=Once you delete a repository, there is no going back. Please be certain.
 settings.delete_notices_1=- This operation <strong>CANNOT</strong> be undone.
-settings.delete_notices_2=- This operation will permanently delete the everything of this repository, including Git data, issues, comments and accesses of collaborators.
+settings.delete_notices_2=- This operation will permanently delete everything in this repository, including Git data, issues, comments and collaborator access.
 settings.delete_notices_fork_1=- All forks will become independent after deletion.
 settings.deletion_success=Repository has been deleted successfully!
 settings.update_settings_success=Repository options has been updated successfully.
@@ -814,10 +827,10 @@ settings.event_push=Push
 settings.event_push_desc=Git push to a repository
 settings.event_issues=Issues
 settings.event_issues_desc=Issue opened, closed, reopened, edited, assigned, unassigned, label updated, label cleared, milestoned, or demilestoned.
-settings.event_issue_comment=Issue Comment
-settings.event_issue_comment_desc=Issue comment created, edited, or deleted.
 settings.event_pull_request=Pull Request
 settings.event_pull_request_desc=Pull request opened, closed, reopened, edited, assigned, unassigned, label updated, label cleared, milestoned, demilestoned, or synchronized.
+settings.event_issue_comment=Issue Comment
+settings.event_issue_comment_desc=Issue comment created, edited, or deleted.
 settings.event_release=Release
 settings.event_release_desc=Release published in a repository.
 settings.active=Active
@@ -830,6 +843,7 @@ settings.recent_deliveries=Recent Deliveries
 settings.hook_type=Hook Type
 settings.add_slack_hook_desc=Add <a href="%s">Slack</a> integration to your repository.
 settings.add_discord_hook_desc=Add <a href="%s">Discord</a> integration to your repository.
+settings.add_dingtalk_hook_desc=Add <a href="%s">Dingtalk</a> integration to your repository.
 settings.slack_token=Token
 settings.slack_domain=Domain
 settings.slack_channel=Channel
@@ -846,6 +860,8 @@ settings.add_key_success=New deploy key '%s' has been added successfully!
 settings.deploy_key_deletion=Delete Deploy Key
 settings.deploy_key_deletion_desc=Deleting this deploy key will remove all related accesses for this repository. Do you want to continue?
 settings.deploy_key_deletion_success=Deploy key has been deleted successfully!
+settings.description_desc=Description of repository. Maximum 512 characters length.
+settings.description_length=Available characters
 
 diff.browse_source=Browse Source
 diff.parent=parent
@@ -1081,11 +1097,12 @@ repos.stars=Stars
 repos.issues=Issues
 repos.size=Size
 
-auths.auth_manage_panel=Authentication Manage Panel
+auths.auth_sources=Authentication Sources
 auths.new=Add New Source
 auths.name=Name
 auths.type=Type
 auths.enabled=Enabled
+auths.default=Default
 auths.updated=Updated
 auths.auth_type=Authentication Type
 auths.auth_name=Authentication Name
@@ -1094,6 +1111,7 @@ auths.domain=Domain
 auths.host=Host
 auths.port=Port
 auths.bind_dn=Bind DN
+auths.bind_dn_helper=You can use '%s' as placeholder for username, e.g. DOM\%s
 auths.bind_password=Bind Password
 auths.bind_password_helper=Warning: This password is stored in plain text. Do not use a high privileged account.
 auths.user_base=User Search Base
@@ -1121,9 +1139,9 @@ auths.enable_tls=Enable TLS Encryption
 auths.skip_tls_verify=Skip TLS Verify
 auths.pam_service_name=PAM Service Name
 auths.enable_auto_register=Enable Auto Registration
-auths.tips=Tips
 auths.edit=Edit Authentication Setting
 auths.activated=This authentication is activated
+auths.default_auth=This authentication is default login source
 auths.new_success=New authentication '%s' has been added successfully.
 auths.update_success=Authentication setting has been updated successfully.
 auths.update=Update Authentication Setting
@@ -1134,6 +1152,7 @@ auths.still_in_used=This authentication is still used by some users, please dele
 auths.deletion_success=Authentication has been deleted successfully!
 auths.login_source_exist=Login source '%s' already exists.
 
+config.not_set=(not set)
 config.server_config=Server Configuration
 config.app_name=Application Name
 config.app_ver=Application Version
@@ -1155,6 +1174,7 @@ config.ssh_domain=Domain
 config.ssh_port=Port
 config.ssh_listen_port=Listen Port
 config.ssh_root_path=Root Path
+config.ssh_rewrite_authorized_keys_at_start=Rewrite authorized_keys At Start
 config.ssh_key_test_path=Key Test Path
 config.ssh_keygen_path=Keygen ('ssh-keygen') Path
 config.ssh_minimum_key_size_check=Minimum Key Size Check
@@ -1170,6 +1190,9 @@ config.disable_http_git=Disable HTTP Git
 config.enable_local_path_migration=Enable Local Path Migration
 config.commits_fetch_concurrency=Commits Fetch Concurrency
 
+config.http_config=HTTP Configuration
+config.http_access_control_allow_origin=Access Control Allow Origin
+
 config.db_config=Database Configuration
 config.db_type=Type
 config.db_host=Host
@@ -1199,7 +1222,7 @@ config.skip_tls_verify=Skip TLS Verify
 config.mailer_config=Mailer Configuration
 config.mailer_enabled=Enabled
 config.mailer_disable_helo=Disable HELO
-config.mailer_name=Name
+config.mailer_subject_prefix=Subject Prefix
 config.mailer_host=Host
 config.mailer_user=User
 config.send_test_mail=Send Test Email
@@ -1272,7 +1295,6 @@ notices.delete_success=System notices have been deleted successfully.
 
 [action]
 create_repo=created repository <a href="%s">%s</a>
-fork_repo=forked a repository to <a href="%s">%s</a>
 rename_repo=renamed repository from <code>%[1]s</code> to <a href="%[2]s">%[3]s</a>
 commit_repo=pushed to <a href="%[1]s/src/%[2]s">%[3]s</a> at <a href="%[1]s">%[4]s</a>
 compare_commits=View comparison for these %d commits
@@ -1289,6 +1311,10 @@ create_branch=created new branch <a href="%[1]s/src/%[2]s">%[3]s</a> at <a href=
 delete_branch=deleted branch <code>%[2]s</code> at <a href="%[1]s">%[3]s</a>
 push_tag=pushed tag <a href="%s/src/%s">%[2]s</a> to <a href="%[1]s">%[3]s</a>
 delete_tag=deleted tag <code>%[2]s</code> at <a href="%[1]s">%[3]s</a>
+fork_repo=forked a repository to <a href="%s">%s</a>
+mirror_sync_push=synced commits to <a href="%[1]s/src/%[2]s">%[3]s</a> at <a href="%[1]s">%[4]s</a> from mirror
+mirror_sync_create=synced new reference <a href="%s/src/%s">%[2]s</a> to <a href="%[1]s">%[3]s</a> from mirror
+mirror_sync_delete=synced and deleted reference <code>%[2]s</code> at <a href="%[1]s">%[3]s</a> from mirror
 
 [tool]
 ago=ago

conf/locale/locale_en-US.ini

@@ -151,6 +151,8 @@ register_hepler_msg = Already have an account? Sign in now!
 social_register_hepler_msg = Already have an account? Bind now!
 disable_register_prompt = Sorry, registration has been disabled. Please contact the site administrator.
 disable_register_mail = Sorry, email services are disabled. Please contact the site administrator.
+auth_source = Authentication Source
+local = Local
 remember_me = Remember Me
 forgot_password= Forgot Password
 forget_password = Forgot password?
@@ -229,6 +231,7 @@ org_name_been_taken = Organization name has already been taken.
 team_name_been_taken = Team name has already been taken.
 email_been_used = Email address has already been used.
 username_password_incorrect = Username or password is not correct.
+auth_source_mismatch = The authentication source selected is not associated with the user.
 enterred_invalid_repo_name = Please make sure that the repository name you entered is correct.
 enterred_invalid_owner_name = Please make sure that the owner name you entered is correct.
 enterred_invalid_password = Please make sure the that password you entered is correct.
@@ -348,6 +351,7 @@ two_factor_or_enter_secret = Or enter the secret:
 two_factor_then_enter_passcode = Then enter passcode:
 two_factor_verify = Verify
 two_factor_invalid_passcode = The passcode you entered is not valid, please try again!
+two_factor_reused_passcode = The passcode you entered has already been used, please try another one!
 two_factor_enable_error = Enable Two-factor authentication failed: %v
 two_factor_enable_success = Two-factor authentication has enabled for your account successfully!
 two_factor_recovery_codes_title = Two-factor Authentication Recovery Codes
@@ -417,6 +421,8 @@ mirror_last_synced = Last Synced
 watchers = Watchers
 stargazers = Stargazers
 forks = Forks
+repo_description_helper = Description of repository. Maximum 512 characters length.
+repo_description_length = Available characters
 
 form.reach_limit_of_creation = The owner has reached maximum creation limit of %d repositories.
 form.name_reserved = Repository name '%s' is reserved.
@@ -514,6 +520,7 @@ editor.file_changed_while_editing = File content has been changed since you star
 editor.file_already_exists = A file with name '%s' already exists in this repository.
 editor.no_changes_to_show = There are no changes to show.
 editor.fail_to_update_file = Failed to update/create file '%s' with error: %v
+editor.fail_to_delete_file = Failed to delete file '%s' with error: %v
 editor.add_subdir = Add subdirectory...
 editor.unable_to_upload_files = Failed to upload files to '%s' with error: %v
 editor.upload_files_to_dir = Upload files to '%s'
@@ -632,6 +639,9 @@ pulls.is_checking = The conflict checking is still in progress, please refresh p
 pulls.can_auto_merge_desc = This pull request can be merged automatically.
 pulls.cannot_auto_merge_desc = This pull request can't be merged automatically because there are conflicts.
 pulls.cannot_auto_merge_helper = Please merge manually in order to resolve the conflicts.
+pulls.create_merge_commit = Create a merge commit
+pulls.rebase_before_merging = Rebase before merging
+pulls.commit_description = Commit Description
 pulls.merge_pull_request = Merge Pull Request
 pulls.open_unmerged_pull_exists = `You can't perform reopen operation because there is already an open pull request (#%d) from same repository with same merge information and is waiting for merging.`
 pulls.delete_branch = Delete Branch
@@ -736,7 +746,9 @@ settings.tracker_issue_style = External Issue Tracker Naming Style:
 settings.tracker_issue_style.numeric = Numeric
 settings.tracker_issue_style.alphanumeric = Alphanumeric
 settings.tracker_url_format_desc = You can use placeholder <code>{user} {repo} {index}</code> for user name, repository name and issue index.
-settings.pulls_desc = Enable pull requests to accept public contributions
+settings.pulls_desc = Enable pull requests to accept contributions between repositories and branches
+settings.pulls.ignore_whitespace = Ignore changes in whitespace
+settings.pulls.allow_rebase_merge = Allow use rebase to merge commits
 settings.danger_zone = Danger Zone
 settings.cannot_fork_to_same_owner = You cannot fork a repository to its original owner.
 settings.new_owner_has_same_repo = The new owner already has a repository with same name. Please choose another name.
@@ -757,7 +769,7 @@ settings.wiki_deletion_success = Repository wiki data have been erased successfu
 settings.delete = Delete This Repository
 settings.delete_desc = Once you delete a repository, there is no going back. Please be certain.
 settings.delete_notices_1 = - This operation <strong>CANNOT</strong> be undone.
-settings.delete_notices_2 = - This operation will permanently delete the everything of this repository, including Git data, issues, comments and accesses of collaborators.
+settings.delete_notices_2 = - This operation will permanently delete everything in this repository, including Git data, issues, comments and collaborator access.
 settings.delete_notices_fork_1 = - All forks will become independent after deletion.
 settings.deletion_success = Repository has been deleted successfully!
 settings.update_settings_success = Repository options has been updated successfully.
@@ -802,9 +814,9 @@ settings.slack_username = Username
 settings.slack_icon_url = Icon URL
 settings.slack_color = Color
 settings.event_desc = When should this webhook be triggered?
-settings.event_push_only = Just the <code>push</code> event.
-settings.event_send_everything = I need <strong>everything</strong>.
-settings.event_choose = Let me choose what I need.
+settings.event_push_only = Just the <code>push</code> event
+settings.event_send_everything = I need <strong>everything</strong>
+settings.event_choose = Let me choose what I need
 settings.event_create = Create
 settings.event_create_desc = Branch or tag created
 settings.event_delete = Delete
@@ -815,10 +827,10 @@ settings.event_push = Push
 settings.event_push_desc = Git push to a repository
 settings.event_issues = Issues
 settings.event_issues_desc = Issue opened, closed, reopened, edited, assigned, unassigned, label updated, label cleared, milestoned, or demilestoned.
-settings.event_issue_comment = Issue Comment
-settings.event_issue_comment_desc = Issue comment created, edited, or deleted.
 settings.event_pull_request = Pull Request
 settings.event_pull_request_desc = Pull request opened, closed, reopened, edited, assigned, unassigned, label updated, label cleared, milestoned, demilestoned, or synchronized.
+settings.event_issue_comment = Issue Comment
+settings.event_issue_comment_desc = Issue comment created, edited, or deleted.
 settings.event_release = Release
 settings.event_release_desc = Release published in a repository.
 settings.active = Active
@@ -831,6 +843,7 @@ settings.recent_deliveries = Recent Deliveries
 settings.hook_type = Hook Type
 settings.add_slack_hook_desc = Add <a href="%s">Slack</a> integration to your repository.
 settings.add_discord_hook_desc = Add <a href="%s">Discord</a> integration to your repository.
+settings.add_dingtalk_hook_desc = Add <a href="%s">Dingtalk</a> integration to your repository.
 settings.slack_token = Token
 settings.slack_domain = Domain
 settings.slack_channel = Channel
@@ -847,6 +860,8 @@ settings.add_key_success = New deploy key '%s' has been added successfully!
 settings.deploy_key_deletion = Delete Deploy Key
 settings.deploy_key_deletion_desc = Deleting this deploy key will remove all related accesses for this repository. Do you want to continue?
 settings.deploy_key_deletion_success = Deploy key has been deleted successfully!
+settings.description_desc = Description of repository. Maximum 512 characters length.
+settings.description_length = Available characters
 
 diff.browse_source = Browse Source
 diff.parent = parent
@@ -1082,11 +1097,12 @@ repos.stars = Stars
 repos.issues = Issues
 repos.size = Size
 
-auths.auth_manage_panel = Authentication Manage Panel
+auths.auth_sources = Authentication Sources
 auths.new = Add New Source
 auths.name = Name
 auths.type = Type
 auths.enabled = Enabled
+auths.default = Default
 auths.updated = Updated
 auths.auth_type = Authentication Type
 auths.auth_name = Authentication Name
@@ -1095,6 +1111,7 @@ auths.domain = Domain
 auths.host = Host
 auths.port = Port
 auths.bind_dn = Bind DN
+auths.bind_dn_helper = You can use '%s' as placeholder for username, e.g. DOM\%s
 auths.bind_password = Bind Password
 auths.bind_password_helper = Warning: This password is stored in plain text. Do not use a high privileged account.
 auths.user_base = User Search Base
@@ -1122,9 +1139,9 @@ auths.enable_tls = Enable TLS Encryption
 auths.skip_tls_verify = Skip TLS Verify
 auths.pam_service_name = PAM Service Name
 auths.enable_auto_register = Enable Auto Registration
-auths.tips = Tips
 auths.edit = Edit Authentication Setting
 auths.activated = This authentication is activated
+auths.default_auth =  This authentication is default login source
 auths.new_success = New authentication '%s' has been added successfully.
 auths.update_success = Authentication setting has been updated successfully.
 auths.update = Update Authentication Setting
@@ -1134,7 +1151,9 @@ auths.delete_auth_desc = This authentication is going to be deleted, do you want
 auths.still_in_used = This authentication is still used by some users, please delete or convert these users to another login type first.
 auths.deletion_success = Authentication has been deleted successfully!
 auths.login_source_exist = Login source '%s' already exists.
+auths.github_api_endpoint = API Endpoint
 
+config.not_set = (not set)
 config.server_config = Server Configuration
 config.app_name = Application Name
 config.app_ver = Application Version
@@ -1156,6 +1175,7 @@ config.ssh_domain = Domain
 config.ssh_port = Port
 config.ssh_listen_port = Listen Port
 config.ssh_root_path = Root Path
+config.ssh_rewrite_authorized_keys_at_start = Rewrite authorized_keys At Start
 config.ssh_key_test_path = Key Test Path
 config.ssh_keygen_path = Keygen ('ssh-keygen') Path
 config.ssh_minimum_key_size_check = Minimum Key Size Check
@@ -1171,6 +1191,9 @@ config.disable_http_git = Disable HTTP Git
 config.enable_local_path_migration = Enable Local Path Migration
 config.commits_fetch_concurrency = Commits Fetch Concurrency
 
+config.http_config = HTTP Configuration
+config.http_access_control_allow_origin = Access Control Allow Origin
+
 config.db_config = Database Configuration
 config.db_type = Type
 config.db_host = Host
@@ -1200,7 +1223,7 @@ config.skip_tls_verify = Skip TLS Verify
 config.mailer_config = Mailer Configuration
 config.mailer_enabled = Enabled
 config.mailer_disable_helo = Disable HELO
-config.mailer_name = Name
+config.mailer_subject_prefix = Subject Prefix
 config.mailer_host = Host
 config.mailer_user = User
 config.send_test_mail = Send Test Email
@@ -1273,7 +1296,6 @@ notices.delete_success = System notices have been deleted successfully.
 
 [action]
 create_repo = created repository <a href="%s">%s</a>
-fork_repo = forked a repository to <a href="%s">%s</a>
 rename_repo = renamed repository from <code>%[1]s</code> to <a href="%[2]s">%[3]s</a>
 commit_repo = pushed to <a href="%[1]s/src/%[2]s">%[3]s</a> at <a href="%[1]s">%[4]s</a>
 compare_commits = View comparison for these %d commits
@@ -1290,6 +1312,10 @@ create_branch = created new branch <a href="%[1]s/src/%[2]s">%[3]s</a> at <a hre
 delete_branch = deleted branch <code>%[2]s</code> at <a href="%[1]s">%[3]s</a>
 push_tag = pushed tag <a href="%s/src/%s">%[2]s</a> to <a href="%[1]s">%[3]s</a>
 delete_tag = deleted tag <code>%[2]s</code> at <a href="%[1]s">%[3]s</a>
+fork_repo = forked a repository to <a href="%s">%s</a>
+mirror_sync_push = synced commits to <a href="%[1]s/src/%[2]s">%[3]s</a> at <a href="%[1]s">%[4]s</a> from mirror
+mirror_sync_create = synced new reference <a href="%s/src/%s">%[2]s</a> to <a href="%[1]s">%[3]s</a> from mirror
+mirror_sync_delete = synced and deleted reference <code>%[2]s</code> at <a href="%[1]s">%[3]s</a> from mirror
 
 [tool]
 ago = ago

conf/locale/locale_es-ES.ini

@@ -119,7 +119,7 @@ sqlite3_not_available=Tu versión no soporta SQLite3, por favor descarga el bina
 invalid_db_setting=La configuración de la base de datos no es correcta: %v
 invalid_repo_path=La ruta de la raíz del repositorio es inválida: %v
 run_user_not_match=El usuario que está ejecutando la aplicación no es el usuario actual: %s -> %s
-smtp_host_missing_port=SMTP Host is missing port in address.
+smtp_host_missing_port=No se ha definido el puerto para el host SMTP.
 invalid_smtp_from=El campo SMTP no es válido: %v
 save_config_failed=Error al guardar la configuración: %v
 invalid_admin_setting=La configuración de la cuenta de administración es inválida: %v
@@ -151,6 +151,8 @@ register_hepler_msg=¿Ya tienes una cuenta? ¡Inicia sesión!
 social_register_hepler_msg=¿Ya tienes una cuenta? ¡Enlázala!
 disable_register_prompt=Lo sentimos, el registro está deshabilitado. Por favor, contacta con el administrador del sitio.
 disable_register_mail=Lo sentimos. Los correos de Confirmación de Registro están deshabilitados.
+auth_source=Authentication Source
+local=Local
 remember_me=Recuérdame
 forgot_password=He olvidado mi contraseña
 forget_password=¿Has olvidado tu contraseña?
@@ -170,12 +172,12 @@ password_too_short=La longitud de la contraseña no puede ser menor a 6.
 non_local_account=Cuentas que no son locales no pueden cambiar las contraseñas a través de Gogs.
 
 login_two_factor=Autenticación en dos pasos
-login_two_factor_passcode=Authentication Passcode
-login_two_factor_enter_recovery_code=Enter a two-factor recovery code
-login_two_factor_recovery=Two-factor Recovery
-login_two_factor_recovery_code=Recovery Code
-login_two_factor_enter_passcode=Enter a two-factor passcode
-login_two_factor_invalid_recovery_code=Recovery code has been used or does not valid.
+login_two_factor_passcode=Pin de autenticación
+login_two_factor_enter_recovery_code=Introduce un código de recuperación de autenticación en dos pasos
+login_two_factor_recovery=Recuperación de autenticación en dos pasos
+login_two_factor_recovery_code=Código de recuperación
+login_two_factor_enter_passcode=Introduce un Pin de autenticación a dos pasos
+login_two_factor_invalid_recovery_code=El código de recuperación ya se ha utilizado o no es válido.
 
 [mail]
 activate_account=Por favor, active su cuenta
@@ -229,6 +231,7 @@ org_name_been_taken=Ya existe una organización con este nombre.
 team_name_been_taken=Ya existe un equipo con este nombre.
 email_been_used=Esta dirección de correo electrónico ya está en uso.
 username_password_incorrect=Nombre de usuario o contraseña incorrectos.
+auth_source_mismatch=The authentication source selected is not associated with the user.
 enterred_invalid_repo_name=Por favor, asegúrate de que has introducido correctamente el nombre del repositorio.
 enterred_invalid_owner_name=Por favor, asegúrate de que has introducido correctamente el nombre del propietario.
 enterred_invalid_password=Por favor, asegúrate de que has introducido correctamente tu contraseña.
@@ -340,23 +343,24 @@ two_factor_on=Activado
 two_factor_off=Desactivado
 two_factor_enable=Activar
 two_factor_disable=Desactivar
-two_factor_view_recovery_codes=View and save <a href="%s%s">your recovery codes</a> in a safe place. You can use them as passcode if you lose access to your authentication application.
+two_factor_view_recovery_codes=Guarda <a href="%s%s"> tus códigos de recuperación</a> en un lugar seguro. Podrás usarlos como código de acceso si pierdes el acceso a tu aplicación de autenticación.
 two_factor_http=Para las operaciones sobre HTTP/HTTPS, no puedes usar un usuario y contraseña. Por favor, cree y utilice <a href="%[1]s%[2]s"> un token de acceso personal</a> como su credencial de acceso, por ejemplo, <code>%[3]s</code>.
-two_factor_enable_title=Habilitar autenticaciñon en dos pasos
+two_factor_enable_title=Habilitar autenticación en dos pasos
 two_factor_scan_qr=Por favor, use su aplicación de autenticación para escanear la imagen:
-two_factor_or_enter_secret=Or enter the secret:
-two_factor_then_enter_passcode=Then enter passcode:
+two_factor_or_enter_secret=O introduzca el secreto:
+two_factor_then_enter_passcode=Introduce el Pin:
 two_factor_verify=Verificar
-two_factor_invalid_passcode=The passcode you entered is not valid, please try again!
-two_factor_enable_error=Enable Two-factor authentication failed: %v
-two_factor_enable_success=Two-factor authentication has enabled for your account successfully!
-two_factor_recovery_codes_title=Two-factor Authentication Recovery Codes
-two_factor_recovery_codes_desc=Recovery codes are used when you temporarily lose access to your authentication application. Each recovery code can only be used once, <b>please keep these codes in a safe place</b>.
-two_factor_regenerate_recovery_codes=Regenerate Recovery Codes
-two_factor_regenerate_recovery_codes_error=Regenerate recovery codes failed: %v
-two_factor_regenerate_recovery_codes_success=New recovery codes has been generated successfully!
+two_factor_invalid_passcode=¡El Pin que has introducido no es válido, por favor, inténtalo de nuevo!
+two_factor_reused_passcode=¡El pin de autenticación que has introducido ya ha sido usado, por favor intenta con otro!
+two_factor_enable_error=Ha fallado la activación de la autenticación en dos pasos: %v
+two_factor_enable_success=¡La autenticación en dos pasos se ha activado en tu cuenta correctamente!
+two_factor_recovery_codes_title=Códigos de recuperación para la autenticación en dos pasos
+two_factor_recovery_codes_desc=Los códigos de recuperación se usan cuando pierdes temporalmente el acceso a tu aplicación de autenticación. Cada código de recuperación solo puede utilizarse en una ocasión, <b>por favor, mantén estos códigos en lugar seguro</b>.
+two_factor_regenerate_recovery_codes=Regenerar códigos de recuperación
+two_factor_regenerate_recovery_codes_error=Ha fallado la regeneración de códigos de recuperación: %v
+two_factor_regenerate_recovery_codes_success=¡Nuevos códigos de recuperación han sido generados con éxito!
 two_factor_disable_title=Deshabilitar autenticación en dos pasos
-two_factor_disable_desc=Your account security level will decrease after disabled two-factor authentication. Do you want to continue?
+two_factor_disable_desc=El nivel de seguridad de tu cuenta se verá reducido después de desactivar la autenticación en dos pasos. ¿Deseas continuar?
 two_factor_disable_success=¡La autenticación en dos pasos ha sido deshabilitada satisfactoriamente!
 
 manage_access_token=Gestionar los Tokens de Acceso personales
@@ -417,6 +421,8 @@ mirror_last_synced=Última sincronización
 watchers=Seguidores
 stargazers=Fans
 forks=Forks
+repo_description_helper=Descripción del repositorio. Longitud máxima de 512 caracteres.
+repo_description_length=Caracteres disponibles
 
 form.reach_limit_of_creation=El propietario ha alcanzado el límite máximo de %d repositorios creados.
 form.name_reserved=El nombre del repositorio '%s' está reservado.
@@ -514,6 +520,7 @@ editor.file_changed_while_editing=El contenido del archivo ha sido modificado de
 editor.file_already_exists=Ya existe un archivo con nombre '%s' en este repositorio.
 editor.no_changes_to_show=No existen cambios para mostrar.
 editor.fail_to_update_file=Error al actualizar/crear el archivo '%s', error: %v
+editor.fail_to_delete_file=Error al borrar el fichero '%s', error: %v
 editor.add_subdir=Añadir subdirectorio...
 editor.unable_to_upload_files=Error al subir archivos a '%s', error: %v
 editor.upload_files_to_dir=Subir archivos a '%s'
@@ -616,6 +623,7 @@ pulls.compare_compare=comparar con
 pulls.filter_branch=Filtrar rama
 pulls.no_results=Sin resultados.
 pulls.nothing_to_compare=Nada que comparar. Las dos ramas coinciden.
+pulls.nothing_merge_base=No hay nada que comparar porque las dos ramas tienen una historia completamente distinta.
 pulls.has_pull_request=`Ya existe un pull request entre estas dos ramas: <a href="%[1]s/pulls/%[3]d">%[2]s#%[3]d</a>`
 pulls.create=Crear Pull Request
 pulls.title_desc=desea fusionar %[1]d commits de <code>%[2]s</code> en <code>%[3]s</code>
@@ -631,6 +639,9 @@ pulls.is_checking=Se está procediendo a la búsqueda de conflictos, por favor a
 pulls.can_auto_merge_desc=Este Pull Request puede ser fusionado automáticamente.
 pulls.cannot_auto_merge_desc=Este Pull Request no puede ser fusionado automáticamente porque hay conflictos.
 pulls.cannot_auto_merge_helper=Por favor, fusiona manualmente para resolver los conflictos.
+pulls.create_merge_commit=Crear un commit del fusionado
+pulls.rebase_before_merging=Hacer rebase antes de fusionar
+pulls.commit_description=Descripción del commit
 pulls.merge_pull_request=Fusionar Pull Request
 pulls.open_unmerged_pull_exists=`Usted no puede realizar la operación de reapertura porque en estos momentos existe una solicitud de pull request (#%d) para el mismo repositorio con la misma información que se encuentra a la espera de aprobación`
 pulls.delete_branch=Eliminar la rama
@@ -690,7 +701,7 @@ settings.branches_bare=No puedes gestionar ramas en un repositorio vacío. Por f
 settings.default_branch=Rama predeterminada
 settings.default_branch_desc=Se considera la rama «base» como la rama por defecto para commits de código, las solicitudes pull y edición en línea.
 settings.update=Actualizar
-settings.update_default_branch_unsupported=Change default branch is not supported by the Git version on server.
+settings.update_default_branch_unsupported=El cambio de rama por defecto no esta soportado por la versión de Git en el servidor.
 settings.update_default_branch_success=¡La Rama por defecto de este repositorio ha sido actualizado con éxito!
 settings.protected_branches=Ramas protegidas
 settings.protected_branches_desc=Proteger ramas force pushing, de eliminación accidental y lista blanca de committers de código.
@@ -707,7 +718,7 @@ settings.protect_whitelist_users=Usuarios que pueden hacer push a esta rama
 settings.protect_whitelist_search_users=Buscar usuarios
 settings.protect_whitelist_teams=Equipos cuyos miembros pueden hacer push a esta rama
 settings.protect_whitelist_search_teams=Buscar equipos
-settings.update_protect_branch_success=Protect options for this branch has been updated successfully!
+settings.update_protect_branch_success=¡Las opciones de protección para esta rama se han actualizado con éxito!
 settings.hooks=Webhooks
 settings.githooks=Git Hooks
 settings.basic_settings=Configuración Básica
@@ -720,7 +731,7 @@ settings.change_reponame_prompt=Este cambio afectará a los enlaces al repositor
 settings.advanced_settings=Ajustes avanzados
 settings.wiki_desc=Activar sistema de wiki
 settings.use_internal_wiki=Usar wiki integrada
-settings.allow_public_wiki_desc=Allow public access to wiki when repository is private
+settings.allow_public_wiki_desc=Permitir acceso público a la wiki cuando el repositorio es privado
 settings.use_external_wiki=Usar Wiki externa
 settings.external_wiki_url=URL externa de la Wiki
 settings.external_wiki_url_desc=Los visitantes serán redireccionados a la URL cuando hagan click en la barra.
@@ -735,9 +746,11 @@ settings.tracker_issue_style=Estilo de etiquetado del tracker externo de inciden
 settings.tracker_issue_style.numeric=Numérico
 settings.tracker_issue_style.alphanumeric=Alfanumérico
 settings.tracker_url_format_desc=Puedes usar las plantillas <code>{user} {repo} {index}</code> para el nombre de usuario, nombre del repositorio e índice de la incidencia.
-settings.pulls_desc=Habilitar Pull Requests para aceptar contribuciones públicas
+settings.pulls_desc=Permitir pull requests para aceptar contribuciones entre repositorios y ramas
+settings.pulls.ignore_whitespace=Ignorar los cambios en el espacio en blanco
+settings.pulls.allow_rebase_merge=Permite usar rebase para fusionar los commits
 settings.danger_zone=Zona de Peligro
-settings.cannot_fork_to_same_owner=You cannot fork a repository to its original owner.
+settings.cannot_fork_to_same_owner=No puedes hacer fork del repositorio a su propietario original.
 settings.new_owner_has_same_repo=El nuevo propietario tiene un repositorio con el mismo nombre.
 settings.convert=Convertir en un repositorio normal
 settings.convert_desc=Puedes convertir este repositorio en un repositorio normal. Este cambio no se puede deshacer.
@@ -756,7 +769,7 @@ settings.wiki_deletion_success=Los datos de la wiki del repositorio han sido bor
 settings.delete=Eliminar este repositorio
 settings.delete_desc=Una vez has eliminado un repositorio, no hay vuelta atrás. Por favor, asegúrate de que es lo que quieres.
 settings.delete_notices_1=- Esta operación <strong>NO PUEDE</strong> revertirse.
-settings.delete_notices_2=- Esta operación eliminará de manera permanente todo el contenido de este repositorio, incluyendo los datos de git, las incidencias, los comentarios y los permisos de acceso de los colaboradores.
+settings.delete_notices_2=- Esta operación eliminará de manera permanente todo el contenido de este repositorio, incluyendo los datos de Git, las incidencias, los comentarios y los permisos de acceso de los colaboradores.
 settings.delete_notices_fork_1=- Todos los forks se convertirán en independientes tras el borrado.
 settings.deletion_success=¡El respositorio ha sido eliminado satisfactoriamente!
 settings.update_settings_success=Las opciones del repositorio se han actualizado correctamente.
@@ -780,8 +793,8 @@ settings.webhook_deletion_success=¡Webhook eliminado con éxito!
 settings.webhook.test_delivery=Test de entrega
 settings.webhook.test_delivery_desc=Enviar un falso evento Push de entrega para probar tus ajustes de webhook
 settings.webhook.test_delivery_success=Probar que los webhook han sido añadidos a la cola de entrega. Esto puede tomar algunos segundos antes de aparecer en el historial de entregas.
-settings.webhook.redelivery=Redelivery
-settings.webhook.redelivery_success=Hook task '%s' has been readded to delivery queue. It may take few seconds to update delivery status in history.
+settings.webhook.redelivery=Reenviar
+settings.webhook.redelivery_success=La tarea del Hook '%s' ha sido reañadida en la cola de entrega. Puede tardar unos segundos en actualizarse el historial de estado de la cola.
 settings.webhook.request=Petición
 settings.webhook.response=Respuesta
 settings.webhook.headers=Encabezado
@@ -796,7 +809,7 @@ settings.add_webhook_desc=Enviaremos una petición <code>POST</code> a la siguie
 settings.payload_url=URL de Payload
 settings.content_type=Tipo de contenido
 settings.secret=Secreto
-settings.secret_desc=Secret will be sent as SHA256 HMAC hex digest of payload via <code>X-Gogs-Signature</code> header.
+settings.secret_desc=El secreto será enviado como un payload SHA256 HMAC hex digest vía cabecera <code>X-Gogs-Signature</code>.
 settings.slack_username=Nombre de usuario
 settings.slack_icon_url=URL de icono
 settings.slack_color=Color
@@ -814,10 +827,10 @@ settings.event_push=Push
 settings.event_push_desc=Git push a un repositorio
 settings.event_issues=Incidencias
 settings.event_issues_desc=Incidencia abierta, cerrada, reabierta, editada, asignada, desasignada, etiqueta actualizada, etiqueta limpiada, hito marcado, o desmarcado,.
-settings.event_issue_comment=Comentario de incidencia
-settings.event_issue_comment_desc=Comentario de incidencias creado, editado o borrado.
 settings.event_pull_request=Pull Request
 settings.event_pull_request_desc=Pull request abierto, cerrado, reabierto, editado, asignado, desasignado, etiqueta actualizada, etiqueta limpiada, hito marcado, hito desmarcado, o sincronizado.
+settings.event_issue_comment=Comentario de incidencia
+settings.event_issue_comment_desc=Comentario de incidencias creado, editado o borrado.
 settings.event_release=Lanzamiento
 settings.event_release_desc=Lanzamiento publicado en un repositorio.
 settings.active=Activo
@@ -830,6 +843,7 @@ settings.recent_deliveries=Envíos Recientes
 settings.hook_type=Tipo de Hook
 settings.add_slack_hook_desc=Añade integración con <a href="%s">Slack</a> a tu repositorio.
 settings.add_discord_hook_desc=Añade integración con <a href="%s">Slack</a> a tu repositorio.
+settings.add_dingtalk_hook_desc=Añade integración con <a href="%s">Dingtalk</a> a tu repositorio.
 settings.slack_token=Token
 settings.slack_domain=Dominio
 settings.slack_channel=Canal
@@ -846,6 +860,8 @@ settings.add_key_success=¡La nueva clave de desplieque '%s' ha sido creada con
 settings.deploy_key_deletion=Eliminar Clave de Despliegue
 settings.deploy_key_deletion_desc=Al eliminar esta clave de despliegue se perderán el permiso de acceso a este repositorio con dicha clave. ¿Deseas continuar?
 settings.deploy_key_deletion_success=¡Clave de despliegue eliminada con éxito!
+settings.description_desc=Descripción del repositorio. Longitud máxima de 512 caracteres.
+settings.description_length=Caracteres disponibles
 
 diff.browse_source=Explorar el Código
 diff.parent=padre
@@ -1003,8 +1019,8 @@ dashboard.git_gc_repos=Ejecutar la recolección de basura en los repositorios
 dashboard.git_gc_repos_success=Todos los repositorios han ejecutado correctamente el recolector de basuras.
 dashboard.resync_all_sshkeys=Reescribir el fichero '.ssh/authorized_keys'(atención: se perderán las claves que no pertenezcan a Gogs)
 dashboard.resync_all_sshkeys_success=Todas las claves públicas se han reescrito correctamente.
-dashboard.resync_all_hooks=Resync pre-receive, update and post-receive hooks of all repositories
-dashboard.resync_all_hooks_success=All repositories' pre-receive, update and post-receive hooks have been resynced successfully.
+dashboard.resync_all_hooks=Resincroniza los "hooks" de pre-recepción, actualización y post-recepción en todos los repositorios
+dashboard.resync_all_hooks_success=Se han vuelto a sincronizar todos los "hooks" de pre-recepción, actualización y post-recepción de los repositorios con éxito.
 dashboard.reinit_missing_repos=Reinicializar todos los registros del repositorio que tienen archivos Git eliminados
 dashboard.reinit_missing_repos_success=Todos los registros del repositorio con archivos Git eliminados han sido reinicializados con éxito.
 
@@ -1081,11 +1097,12 @@ repos.stars=Estrellas
 repos.issues=Incidencias
 repos.size=Tamaño
 
-auths.auth_manage_panel=Panel de administración de autenticación
+auths.auth_sources=Fuentes de autentificación
 auths.new=Añadir nuevo origen
 auths.name=Nombre
 auths.type=Tipo
 auths.enabled=Activo
+auths.default=Por defecto
 auths.updated=Actualizado
 auths.auth_type=Tipo de autenticación
 auths.auth_name=Nombre de autenticación
@@ -1094,20 +1111,21 @@ auths.domain=Dominio
 auths.host=Host
 auths.port=Puerto
 auths.bind_dn=Bind DN
+auths.bind_dn_helper=Puedes usar '%s' como marcador de posición para el nombre de usuario, ej. DOM\%s
 auths.bind_password=Contraseña Bind
 auths.bind_password_helper=Advertencia: La contraseña se almacena como texto plano. No utilice una cuenta con privilegios elevados.
 auths.user_base=Base de búsqueda de usuarios
 auths.user_dn=DN de Usuario
 auths.attribute_username=Atributo de nombre de usuario
 auths.attribute_username_placeholder=Dejar vacío para usar el campo de inicio de sesión como nombre de usuario.
-auths.attribute_name=First Name Attribute
+auths.attribute_name=Atributo nombre
 auths.attribute_surname=Atributo apellido
 auths.attribute_mail=Atributo correo electrónico
-auths.verify_group_membership=Verify group membership
-auths.group_search_base_dn=Group Search Base DN
-auths.group_filter=Group Filter
-auths.group_attribute_contain_user_list=Group Attribute Containing List of Users
-auths.user_attribute_listed_in_group=User Attribute Listed in Group
+auths.verify_group_membership=Verificar pertenencia a grupo
+auths.group_search_base_dn=Base DN para la búsqueda de grupos
+auths.group_filter=Filtro de grupo
+auths.group_attribute_contain_user_list=Atributo de grupo que contiene la lista de usuarios
+auths.user_attribute_listed_in_group=Atributo de usuario listado en grupo
 auths.attributes_in_bind=Buscar atributos en el contexto del Bind DN
 auths.filter=Filtro de usuario
 auths.admin_filter=Filtro de aministrador
@@ -1121,9 +1139,9 @@ auths.enable_tls=Habilitar cifrado TLS
 auths.skip_tls_verify=Omitir la verificación TLS
 auths.pam_service_name=Nombre del Servicio PAM
 auths.enable_auto_register=Hablilitar Auto-Registro
-auths.tips=Consejos
 auths.edit=Editar la Configuración de Autenticación
 auths.activated=Esta autenticación ha sido activada
+auths.default_auth=Esta autenticación es la fuente de inicio de sesión predeterminada
 auths.new_success=¡La autenticación '%s' ha sido añadida con éxito!
 auths.update_success=La configuración de autenticación ha sido actualizada con éxito.
 auths.update=Actualizar la configuración de autenticación
@@ -1134,6 +1152,7 @@ auths.still_in_used=Este método de autentificación aún es utilizado por algun
 auths.deletion_success=¡La autenticación ha sido eliminada con éxito!
 auths.login_source_exist=El origen de autenticación '%s' ya existe.
 
+config.not_set=(sin definir)
 config.server_config=Configuración del servidor
 config.app_name=Nombre de la Aplicación
 config.app_ver=Versión de la Aplicación
@@ -1155,6 +1174,7 @@ config.ssh_domain=Dominio
 config.ssh_port=Puerto
 config.ssh_listen_port=Puerto de escucha
 config.ssh_root_path=Ruta raíz
+config.ssh_rewrite_authorized_keys_at_start=Reescribir authorized_keys en el arranque
 config.ssh_key_test_path=Ruta de la clave de prueba
 config.ssh_keygen_path=Ruta del generador de claves ('ssh-keygen')
 config.ssh_minimum_key_size_check=Tamaño mínimo de la clave de verificación
@@ -1168,7 +1188,10 @@ config.max_creation_limit=Limite máximo de creación
 config.preferred_licenses=Licencias Preferidas
 config.disable_http_git=Desactivar HTTP Git
 config.enable_local_path_migration=Activar la migración de la ruta de acceso Local
-config.commits_fetch_concurrency=Commits Fetch Concurrency
+config.commits_fetch_concurrency=Concurrencia de la búsqueda de commits
+
+config.http_config=Configuración HTTP
+config.http_access_control_allow_origin=Access Control Allow Origin
 
 config.db_config=Configuración de la Base de Datos
 config.db_type=Tipo
@@ -1199,7 +1222,7 @@ config.skip_tls_verify=Omitir la Verificación TLS
 config.mailer_config=Configuración del servidor de correo
 config.mailer_enabled=Activado
 config.mailer_disable_helo=Desactivar HELO
-config.mailer_name=Nombre
+config.mailer_subject_prefix=Prefijo del asunto
 config.mailer_host=Host
 config.mailer_user=Usuario
 config.send_test_mail=Enviar email de prueba
@@ -1272,7 +1295,6 @@ notices.delete_success=Las notificaciones del sistema han sido eliminadas satisf
 
 [action]
 create_repo=creó el repositorio <a href="%s">%s</a>
-fork_repo=forked a repository to <a href="%s">%s</a>
 rename_repo=repositorio renombrado de <code>%[1]s</code> a <a href="%[2]s">%[3]s</a>
 commit_repo=hizo push a <a href="%[1]s/src/%[2]s">%[3]s</a> en <a href="%[1]s">%[4]s</a>
 compare_commits=Ver comparación de estos %d commits
@@ -1284,11 +1306,15 @@ comment_issue=`comentó en la incidencia <a href="%s/issues/%s">%s#%[2]s</a>`
 create_pull_request=`creado pull request <a href="%s/pulls/%s">%s#%[2]s</a>`
 close_pull_request=`cerró el pull request <a href="%s/pulls/%s">%s#%[2]s</a>`
 reopen_pull_request=`reabrió el pull request <a href="%s/pulls/%s">%s#%[2]s</a>`
-merge_pull_request=`fusionado pull request <a href="%s/pulls/%s">%s#%[2]s</a>`
+merge_pull_request=`fusionó el pull request <a href="%s/pulls/%s">%s#%[2]s</a>`
 create_branch=nueva rama <a href="%[1]s/src/%[2]s">%[3]s</a> creada en <a href="%[1]s">%[4]s</a>
 delete_branch=borrada rama <code>%[2]s</code> at <a href="%[1]s">%[3]s</a>
 push_tag=hizo push del tag <a href="%s/src/%s">%[2]s</a> a <a href="%[1]s">%[3]s</a>
 delete_tag=borrada etiqueta <code>%[2]s</code> en <a href="%[1]s">%[3]s</a>
+fork_repo=ha hecho un Fork en <a href="%s">%s</a>
+mirror_sync_push=sincronizados commits a <a href="%[1]s/src/%[2]s">%[3]s</a> en <a href="%[1]s">%[4]s</a> desde la réplica
+mirror_sync_create=sincronizada nueva referencia <a href="%s/src/%s">%[2]s</a> a <a href="%[1]s">%[3]s</a> desde la réplica
+mirror_sync_delete=sincronizada y eliminada referencia <code>%[2]s</code> en <a href="%[1]s">%[3]s</a> desde la réplica
 
 [tool]
 ago=hace

conf/locale/locale_fi-FI.ini

@@ -151,6 +151,8 @@ register_hepler_msg=On jo tili? Kirjaudu sisään nyt!
 social_register_hepler_msg=On jo tili? Liitä nyt!
 disable_register_prompt=Sori, rekisteröinti on poistettu käytöstä. Ole hyvä ja ota yhteyttä sivuston ylläpitoon.
 disable_register_mail=Sori, rekisteröinti sähköpostivarmistukset on poistettu käytöstä.
+auth_source=Authentication Source
+local=Local
 remember_me=Muista minut
 forgot_password=Unohtuiko salasana
 forget_password=Unohtuiko salasana?
@@ -229,6 +231,7 @@ org_name_been_taken=Organisaation nimi on jo käytössä.
 team_name_been_taken=Tiimin nimi on jo käytössä.
 email_been_used=Sähköpostiosoite on jo käytössä.
 username_password_incorrect=Käyttäjätunnus tai salasana ei ole oikein.
+auth_source_mismatch=The authentication source selected is not associated with the user.
 enterred_invalid_repo_name=Ole hyvä ja varmista että kirjoittamasi repon nimi on oikein.
 enterred_invalid_owner_name=Ole hyvä ja varmista että kirjoittamasi omistajan nimi on oikein.
 enterred_invalid_password=Ole hyvä ja varmista että kirjoittamasi salasana on oikein.
@@ -348,6 +351,7 @@ two_factor_or_enter_secret=Tai kirjoita salaisuus:
 two_factor_then_enter_passcode=Sitten kirjoita salasana:
 two_factor_verify=Vahvista
 two_factor_invalid_passcode=Kirjoittamasi salasana ei kelpaa, yritä uudelleen!
+two_factor_reused_passcode=The passcode you entered has already been used, please try another one!
 two_factor_enable_error=Ota käyttöön kaksivaiheinen todennus epäonnistui: %v
 two_factor_enable_success=Kaksivaiheinen todennus on otettu käyttöön tilissäsi menestyksekkäästi!
 two_factor_recovery_codes_title=Kaksivaiheinen todennus palautuskoodit
@@ -417,6 +421,8 @@ mirror_last_synced=Synkronoitu viimeksi
 watchers=Tarkkailijat
 stargazers=Tähtiharrastajat
 forks=Haarat
+repo_description_helper=Description of repository. Maximum 512 characters length.
+repo_description_length=Available characters
 
 form.reach_limit_of_creation=Omistaja on saavuttanut maksimi luontirajan %d repoa.
 form.name_reserved=Repon nimi '%s' on varattu.
@@ -514,6 +520,7 @@ editor.file_changed_while_editing=Tiedoston sisältöä on muutettu aloittamises
 editor.file_already_exists=Tiedosto '%s' on jo olemassa tässä repossa.
 editor.no_changes_to_show=Ei muutoksia näytettäväksi.
 editor.fail_to_update_file=Tiedoston '%s' päivitys/luonti epäonnistui virheeseen: %v
+editor.fail_to_delete_file=Failed to delete file '%s' with error: %v
 editor.add_subdir=Lisää alikansio...
 editor.unable_to_upload_files=Tiedostojen lataus epäonnistui kansioon '%s' virheellä: %v
 editor.upload_files_to_dir=Lataa tiedostoja kansioon '%s'
@@ -616,6 +623,7 @@ pulls.compare_compare=vertaa
 pulls.filter_branch=Suodata branch
 pulls.no_results=Tuloksia ei löytynyt.
 pulls.nothing_to_compare=Ei ole mitään verrattavaa koska base ja head branchit ovat tasoissa.
+pulls.nothing_merge_base=There is nothing to compare because two branches have completely different history.
 pulls.has_pull_request=`On olemassa jo pull pyyntö näiden kohteiden välillä: <a href="%[1]s/pulls/%[3]d">%[2]s#%[3]d</a>`
 pulls.create=Luo Pull-pyyntö
 pulls.title_desc=haluaa yhdistää %[1]d committia lähteestä <code>%[2]s</code> kohteeseen <code>%[3]s</code>
@@ -631,6 +639,9 @@ pulls.is_checking=Konfliktin tarkistus on yhä meneillään, ole hyvä ja päivi
 pulls.can_auto_merge_desc=Tämä pull-pyyntö voidaan yhdistää automaattisesti.
 pulls.cannot_auto_merge_desc=Tätä pull-pyyntöä ei voi yhdistää automaattisesti koska on konflikteja.
 pulls.cannot_auto_merge_helper=Ole hyvä ja yhdistä manuaalisesti konfliktien ratkaisemiseksi.
+pulls.create_merge_commit=Create a merge commit
+pulls.rebase_before_merging=Rebase before merging
+pulls.commit_description=Commit Description
 pulls.merge_pull_request=Yhdistä Pull-pyyntö
 pulls.open_unmerged_pull_exists=`Et voi suorittaa uudelleenavaus toimintoa koska on jo olemassa pull-pyyntö (#%d) samasta reposta samoilla yhdistämistiedoilla ja odottaa yhdistämistä.`
 pulls.delete_branch=Poista haara
@@ -735,7 +746,9 @@ settings.tracker_issue_style=Ulkoisen virheenseurannan nimeämistyyli:
 settings.tracker_issue_style.numeric=Numeerinen
 settings.tracker_issue_style.alphanumeric=Aakkosnumeerinen
 settings.tracker_url_format_desc=Voit käyttää paikkamerkkiä <code>{user} {repo} {index}</code> käyttäjänimelle, reponimelle ja vikanumerolle.
-settings.pulls_desc=Ota käyttöön pull-pyynnöt salliaksesi julkiset koodilahjoitukset
+settings.pulls_desc=Enable pull requests to accept contributions between repositories and branches
+settings.pulls.ignore_whitespace=Ignore changes in whitespace
+settings.pulls.allow_rebase_merge=Allow use rebase to merge commits
 settings.danger_zone=Vaaravyöhyke
 settings.cannot_fork_to_same_owner=Et voi forkata repoa alkuperäiselle omistajalleen.
 settings.new_owner_has_same_repo=Uudella omistajalla on jo samanniminen repo. Ole hyvä ja valitse toinen nimi.
@@ -756,10 +769,10 @@ settings.wiki_deletion_success=Repo wiki tiedot on poistettu onnistuneesti.
 settings.delete=Poista tämä repo
 settings.delete_desc=Huomio, kun kerran poistat repon, niin ei ole paluuta. Varmista että haluat todella tehdä tämän.
 settings.delete_notices_1=- Tätä toimintoa <strong>EI VOI</strong> peruuttaa myöhemmin.
-settings.delete_notices_2=- Tämä toiminto poistaa pysyvästi kaikki tästä reposta, mukaanlukien Git tiedot, ongelmat, kommentit ja yhteistyökumppanien pääsyoikeudet.
+settings.delete_notices_2=- This operation will permanently delete everything in this repository, including Git data, issues, comments and collaborator access.
 settings.delete_notices_fork_1=- Kaikki haarat muuttuvat itsenäisiksi poiston jälkeen.
 settings.deletion_success=Repo on poistettu onnistuneesti!
-settings.update_settings_success=Repom asetukset on päivitetty onnistuneesti.
+settings.update_settings_success=Repon asetukset on päivitetty onnistuneesti.
 settings.transfer_owner=Uusi omistaja
 settings.make_transfer=Tee siirto
 settings.transfer_succeed=Arkiston omistusoikeus on siirretty onnistuneesti.
@@ -814,10 +827,10 @@ settings.event_push=Push
 settings.event_push_desc=Git push repoon
 settings.event_issues=Ongelmat
 settings.event_issues_desc=Ongelma avattu, suljettu, uudelleenavattu, muokattu, annettu, anto vedottu, tarra päivitetty, tarra poistettu, merkkipaalutettu, tai poistettu merkkipaalu.
-settings.event_issue_comment=Ongelman kommentti
-settings.event_issue_comment_desc=Ongelman kommentti luotu, muokattu, tai poistettu.
 settings.event_pull_request=Pull-pyyntö
 settings.event_pull_request_desc=Pull-pyyntö avattu, suljettu, uudelleenavattu, muokattu, annettu, anto vedottu, tarra päivitetty, tarra poistettu, merkkipaalutettu, poistettu merkkipaalu, tai synkronoitu.
+settings.event_issue_comment=Ongelman kommentti
+settings.event_issue_comment_desc=Ongelman kommentti luotu, muokattu, tai poistettu.
 settings.event_release=Julkaisu
 settings.event_release_desc=Julkaisu julkaistu repoon.
 settings.active=Aktiivinen
@@ -830,6 +843,7 @@ settings.recent_deliveries=Viimeisimmät toimitukset
 settings.hook_type=Koukkutyyppi
 settings.add_slack_hook_desc=Lisää <a href="%s">Slack</a> integraatio repoosi.
 settings.add_discord_hook_desc=Lisää <a href="%s">Discord</a> integraatio repositoryysi.
+settings.add_dingtalk_hook_desc=Lisää <a href="%s">Dingtalk</a> integraatio repositoryysi.
 settings.slack_token=Pääsymerkki
 settings.slack_domain=Verkkotunnus
 settings.slack_channel=Kanava
@@ -846,6 +860,8 @@ settings.add_key_success=Uusi deploy avain '%s' on lisätty onnistuneesti!
 settings.deploy_key_deletion=Poista deploy avain
 settings.deploy_key_deletion_desc=Deploy avaimen poistaminen poistaa myös kaikki liitetyt käyttötiedot tästä reposta. Haluatko jatkaa?
 settings.deploy_key_deletion_success=Deploy avain on poistettu onnistuneesti!
+settings.description_desc=Description of repository. Maximum 512 characters length.
+settings.description_length=Available characters
 
 diff.browse_source=Selaa lähdekoodia
 diff.parent=vanhempi
@@ -1081,11 +1097,12 @@ repos.stars=Äänet
 repos.issues=Ongelmat
 repos.size=Koko
 
-auths.auth_manage_panel=Todennus hallintapaneeli
+auths.auth_sources=Authentication Sources
 auths.new=Lisää uusi lähde
 auths.name=Nimi
 auths.type=Tyyppi
 auths.enabled=Käytössä
+auths.default=Default
 auths.updated=Päivitetty
 auths.auth_type=Todennustyyppi
 auths.auth_name=Todennusnimi
@@ -1094,6 +1111,7 @@ auths.domain=Verkkotunnus
 auths.host=Isäntä
 auths.port=Portti
 auths.bind_dn=Liitä DN
+auths.bind_dn_helper=You can use '%s' as placeholder for username, e.g. DOM\%s
 auths.bind_password=Liitä salasana
 auths.bind_password_helper=Varoitus: Tämä salasana tallennetaan tavallisena tekstinä. Älä käytä korkeasti etuoikeutetulla tilillä.
 auths.user_base=Käyttäjä hakuperuste
@@ -1121,9 +1139,9 @@ auths.enable_tls=Ota käyttöön TLS-salaus
 auths.skip_tls_verify=Ohita TLS tarkistaminen
 auths.pam_service_name=PAM palvelun nimi
 auths.enable_auto_register=Ota käyttöön automaattinen rekisteröinti
-auths.tips=Vinkit
 auths.edit=Muokkaa todennusasetusta
 auths.activated=Tämä todennus on aktivoitu
+auths.default_auth=This authentication is default login source
 auths.new_success=Uusi todennus '%s' on luotu onnistuneesti.
 auths.update_success=Todennusasetus on päivitetty onnistuneesti.
 auths.update=Päivitä todennusasetus
@@ -1134,6 +1152,7 @@ auths.still_in_used=Tämä todennus on yhä joidenkin käyttäjien käytössä,
 auths.deletion_success=Todennus on poistettu onnistuneesti!
 auths.login_source_exist=Kirjautumislähde '%s' on jo olemassa
 
+config.not_set=(ei ole asetettu)
 config.server_config=Palvelin asetukset
 config.app_name=Sovellus nimi
 config.app_ver=Sovellus versio
@@ -1155,6 +1174,7 @@ config.ssh_domain=Verkkotunnus
 config.ssh_port=Portti
 config.ssh_listen_port=Kuuntele porttia
 config.ssh_root_path=Juuren polku
+config.ssh_rewrite_authorized_keys_at_start=Rewrite authorized_keys At Start
 config.ssh_key_test_path=Polku jossa avaimet testataan
 config.ssh_keygen_path=Keygen ('ssh-keygen') polku
 config.ssh_minimum_key_size_check=Avaimen vähimmäiskoko tarkistus
@@ -1170,6 +1190,9 @@ config.disable_http_git=Poista käytöstä HTTP Git
 config.enable_local_path_migration=Ota käyttöön paikallisen polun migraatio
 config.commits_fetch_concurrency=Committien noudon samanaikaisuus
 
+config.http_config=HTTP-asetukset
+config.http_access_control_allow_origin=Access Control Allow Origin
+
 config.db_config=Tietokannan asetukset
 config.db_type=Tyyppi
 config.db_host=Isäntä
@@ -1199,7 +1222,7 @@ config.skip_tls_verify=Ohita TLS tarkistaminen
 config.mailer_config=Sähköpostipalvelin asetukset
 config.mailer_enabled=Käytössä
 config.mailer_disable_helo=Poista käytöstä HELO
-config.mailer_name=Nimi
+config.mailer_subject_prefix=Subject Prefix
 config.mailer_host=Isäntä
 config.mailer_user=Käyttäjä
 config.send_test_mail=Lähetä testi sähköposti
@@ -1272,7 +1295,6 @@ notices.delete_success=Järjestelmän ilmoitukset on poistettu onnistuneesti.
 
 [action]
 create_repo=luotu repo <a href="%s">%s</a>
-fork_repo=forkattu repo kohteeseen <a href="%s"> %s</a>
 rename_repo=uudelleennimetty repo <code>%[1]s</code> nimelle <a href="%[2]s">%[3]s</a>
 commit_repo=pushattu kohteeseen <a href="%[1]s/src/%[2]s">%[3]s</a> paikassa <a href="%[1]s">%[4]s</a>
 compare_commits=Näytä vertailu näille %d commiteille
@@ -1289,6 +1311,10 @@ create_branch=luotu uusi haara <a href="%[1]s/src/%[2]s">%[3]s</a> kohteeseen <a
 delete_branch=poistettu haara <code>%[2]s</code> kohteesta <a href="%[1]s">%[3]s</a>
 push_tag=pushattu tagi <a href="%s/src/%s">%[2]s</a> kohteeseen <a href="%[1]s">%[3]s</a>
 delete_tag=poistettu tagi <code>%[2]s</code> kohteesta <a href="%[1]s">%[3]s</a>
+fork_repo=forkattu repo kohteeseen <a href="%s"> %s</a>
+mirror_sync_push=synced commits to <a href="%[1]s/src/%[2]s">%[3]s</a> at <a href="%[1]s">%[4]s</a> from mirror
+mirror_sync_create=synced new reference <a href="%s/src/%s">%[2]s</a> to <a href="%[1]s">%[3]s</a> from mirror
+mirror_sync_delete=synced and deleted reference <code>%[2]s</code> at <a href="%[1]s">%[3]s</a> from mirror
 
 [tool]
 ago=sitten

conf/locale/locale_fr-FR.ini

@@ -119,7 +119,7 @@ sqlite3_not_available=Votre version publiée ne prend pas en charge SQLite3. Veu
 invalid_db_setting=Paramètres de base de données incorrects : %v
 invalid_repo_path=Chemin vers la racine du dépôt invalide : %v
 run_user_not_match=L'utilisateur d'exécution saisi n'est pas l'utilisateur d'exécution actuel : %s -> %s
-smtp_host_missing_port=SMTP Host is missing port in address.
+smtp_host_missing_port=Le numéro de port est manquant dans l'adresse de l'Hôte SMTP.
 invalid_smtp_from=Le champ SMTP Provenant de n'est pas valide: %v
 save_config_failed=La sauvegarde de la configuration a échoué : %v
 invalid_admin_setting=Paramètres du compte administrateur invalides : %v
@@ -151,6 +151,8 @@ register_hepler_msg=Déjà enregistré ? Connectez-vous !
 social_register_hepler_msg=Déjà enregistré ? Associez-le !
 disable_register_prompt=Désolé, les enregistrements ont été désactivés. Veuillez contacter l'administrateur du site.
 disable_register_mail=Désolé, la confirmation par courriel des enregistrements a été désactivée.
+auth_source=Sources d'authentification
+local=Locale
 remember_me=Se souvenir de moi
 forgot_password=Mot de passe oublié
 forget_password=Mot de passe oublié ?
@@ -158,7 +160,7 @@ sign_up_now=Pas de compte ? Inscrivez-vous maintenant.
 confirmation_mail_sent_prompt=Un nouveau mail de confirmation à été envoyé à <b>%s</b>. Veuillez vérifier votre boîte de réception dans un délai de %d heures pour compléter votre enregistrement.
 active_your_account=Activer votre compte
 prohibit_login=Connexion interdite
-prohibit_login_desc=Votre compte est interdit de se connecter, contactez l’administrateur du site.
+prohibit_login_desc=La connexion avec ce compte est interdite ; contactez l'administrateur du site.
 resent_limit_prompt=Désolé, vos tentatives d'activation sont trop fréquentes. Veuillez réessayer dans 3 minutes.
 has_unconfirmed_mail=Bonjour %s, votre adresse e-mail (<b>%s</b>) n'a pas été confirmée. Si vous n'avez reçu aucun mail de confirmation ou souhaitez renouveler l'envoi, cliquez sur le bouton ci-dessous.
 resend_mail=Cliquez ici pour renvoyer un mail de confirmation
@@ -170,12 +172,12 @@ password_too_short=Le mot de passe doit contenir 6 caractères minimum.
 non_local_account=Les comptes non locaux ne peuvent pas changer leur mot de passe via Gogs.
 
 login_two_factor=Authentification en deux étapes
-login_two_factor_passcode=Mot de passe d’authentification
+login_two_factor_passcode=Mot de passe d'authentification
 login_two_factor_enter_recovery_code=Entrez un code de récupération en deux étapes
 login_two_factor_recovery=Récupération en deux étapes
 login_two_factor_recovery_code=Code de récupération
 login_two_factor_enter_passcode=Entrez un code d'authentification en deux étapes
-login_two_factor_invalid_recovery_code=Code de récupération a été utilisé ou n’est pas valide.
+login_two_factor_invalid_recovery_code=Code de récupération a été utilisé ou n'est pas valide.
 
 [mail]
 activate_account=Veuillez activer votre compte
@@ -229,6 +231,7 @@ org_name_been_taken=Nom d'organisation déjà pris.
 team_name_been_taken=Nom d'équipe déjà pris.
 email_been_used=Adresse e-mail déjà utilisée.
 username_password_incorrect=Nom d'utilisateur ou mot de passe incorrect.
+auth_source_mismatch=La source d’authentification sélectionnée n’est pas associée à l’utilisateur.
 enterred_invalid_repo_name=Veuillez vérifier que le nom saisi du dépôt soit correct.
 enterred_invalid_owner_name=Veuillez vérifier que le nom du propriétaire saisi soit correct.
 enterred_invalid_password=Veuillez vérifier que le mot de passe saisi soit correct.
@@ -343,11 +346,12 @@ two_factor_disable=Désactiver
 two_factor_view_recovery_codes=Voir et sauvegarder <a href="%s%s">vos codes de récupération</a> dans un endroit sécurisé. Vois pouvez les utiliser comme mot de passe si vous perdez l'accès à l'application d'authentification.
 two_factor_http=Vous ne pouvez plus utiliser un nom d'utilisateur et mot de passe en clair pour les opérations en HTTP/HTTPS. Merci de créer et d'utiliser un <a href="%[1]s%[2]s">jeton d'accès personnel</a> comme moyen d'identification, par exemple <code>%[3]s</code>.
 two_factor_enable_title=Activer l'authentification en deux étapes
-two_factor_scan_qr=Veuillez utiliser votre application d’authentification pour numériser l’image :
+two_factor_scan_qr=Veuillez utiliser votre application d'authentification pour numériser l'image :
 two_factor_or_enter_secret=Ou entrez la phrase secrète :
 two_factor_then_enter_passcode=Puis entrez le mot de passe :
 two_factor_verify=Vérifier
 two_factor_invalid_passcode=Le mot de passe que vous avez entré n'est pas valide, veuillez réessayer.
+two_factor_reused_passcode=Le mot de passe que vous avez entré a déjà été utilisé, veuillez en essayez un autre !
 two_factor_enable_error=L'activation de l'authentification en deux étapes a échoué : %v
 two_factor_enable_success=L'authentification en deux étapes a été bien été activée pour votre compte.
 two_factor_recovery_codes_title=Codes de secours pour l'authentification en deux étapes
@@ -393,7 +397,7 @@ repo_name_helper=Idéalement, le nom d'un dépot devrait être court, mémorable
 visibility=Visibilité
 visiblity_helper=Ce dépôt est <span class="ui red text"> privé</span>
 visiblity_helper_forced=L'administrateur du site a forcé tous les nouveaux dépôts à être <span class="ui red text">privés</span>
-visiblity_fork_helper=(Les changement de cette valeur affecteront tous les forks)
+visiblity_fork_helper=(Les changements de cette valeur affecteront tous les forks)
 clone_helper=Besoin d'aide pour dupliquer ? Visitez <a target="_blank" href="%s">l'aide</a> !
 fork_repo=Créer un fork du dépôt
 fork_from=Fork de
@@ -417,6 +421,8 @@ mirror_last_synced=Dernière synchronisation
 watchers=Observateurs
 stargazers=Stargazers
 forks=Forks
+repo_description_helper=Description du dépôt. 512 caractères maximum.
+repo_description_length=Caractères disponibles
 
 form.reach_limit_of_creation=Le propriétaire a atteint le nombre maximal de %d dépôts créés.
 form.name_reserved=Le nom de dépôt '%s' est réservé.
@@ -506,16 +512,17 @@ editor.new_branch_name_desc=Nouveau nom de la branche...
 editor.cancel=Annuler
 editor.filename_cannot_be_empty=Nom de fichier ne peut pas être vide.
 editor.branch_already_exists=La branche '%s' existe déjà dans ce dépôt.
-editor.directory_is_a_file=L'entrée '%s' dans le chemin d’accès parent est un fichier pas un répertoire dans ce dépôt.
+editor.directory_is_a_file=L'entrée '%s' dans le chemin d'accès parent est un fichier, pas un répertoire dans ce dépôt.
 editor.file_is_a_symlink=Le fichier « %s » est un lien symbolique qui ne peut être modifié depuis l'éditeur web.
 editor.filename_is_a_directory=Le nom de fichier '%s' existe déjà dans ce dépot.
 editor.file_editing_no_longer_exists=Le fichier '%s' que vous modifiez n'existe plus dans le dépôt.
 editor.file_changed_while_editing=Le contenu du fichier à changé depuis que vous avez commencé à l'éditer. <a target="_blank" href="%s">Cliquez ici</a> pour voir ce qui à été modifié ou <strong>appuyez sur commit encore une fois</strong> pour remplacer ces changements.
 editor.file_already_exists=La branche '%s' existe déjà dans ce dépôt.
 editor.no_changes_to_show=Il n’y a aucun changement à afficher.
-editor.fail_to_update_file=Échec lors de la mise à jour/création du fichier '%s' avec l’erreur : %v
+editor.fail_to_update_file=Échec lors de la mise à jour/création du fichier '%s' avec l'erreur : %v
+editor.fail_to_delete_file=Impossible de supprimer le fichier «%s» avec l’erreur : %v
 editor.add_subdir=Ajouter un sous-répertoire...
-editor.unable_to_upload_files=Échec lors de l'envoie du fichier '%s' avec l’erreur : %v
+editor.unable_to_upload_files=Échec lors de l'envoie du fichier '%s' avec l'erreur : %v
 editor.upload_files_to_dir=Transférer les fichiers vers '%s'
 
 commits.commit_history=Historique des commits
@@ -616,14 +623,15 @@ pulls.compare_compare=Comparer
 pulls.filter_branch=Filtre de branche
 pulls.no_results=Aucun résultat trouvé.
 pulls.nothing_to_compare=Il n'y a rien de comparable parce que les deux branches sont égales.
-pulls.has_pull_request=`Il y a déjà une demande de tirer entre ces deux cibles : <a href="%[1]s/pulls/%[3]d">%[2]s#%[3]d</a>`
-pulls.create=Creer une Pull Request
+pulls.nothing_merge_base=Il n'y a rien à comparer parce que les deux branches ont un historique complètement différent.
+pulls.has_pull_request=`Il y a déjà une pull request entre ces deux cibles : <a href="%[1]s/pulls/%[3]d">%[2]s#%[3]d</a>`
+pulls.create=Créer une Pull Request
 pulls.title_desc=veut fusionner %[1]d commits à partir de <code>%[2]s</code> vers <code>%[3]s</code>
-pulls.merged_title_desc=à fusionné %[1]d commits à partir de <code>%[2]s</code> vers <code>%[3]s</code> %[4]s
+pulls.merged_title_desc=a fusionné %[1]d commits à partir de <code>%[2]s</code> vers <code>%[3]s</code> %[4]s
 pulls.tab_conversation=Conversation
 pulls.tab_commits=Commits
 pulls.tab_files=Fichiers modifiés
-pulls.reopen_to_merge=Veuillez rouvrir cette demande de Pull Request pour effectuer l'opération de fusion.
+pulls.reopen_to_merge=Veuillez rouvrir cette Pull Request pour effectuer l'opération de fusion.
 pulls.merged=Fusionné
 pulls.has_merged=Cette Pull Request a été fusionnée avec succès !
 pulls.data_broken=Les données de cette pull request ont été compromises en raison de la suppression d'informations sur le fork.
@@ -631,6 +639,9 @@ pulls.is_checking=La recherche de conflits est toujours en cours, veuillez rafra
 pulls.can_auto_merge_desc=Cette pull request peut être fusionnée automatiquement.
 pulls.cannot_auto_merge_desc=Cette pull request ne peut être fusionnée automatiquement à cause de conflits.
 pulls.cannot_auto_merge_helper=Fusionner manuellement afin de résoudre les conflits.
+pulls.create_merge_commit=Créer un commit de fusion
+pulls.rebase_before_merging=Rebaser avant la fusion
+pulls.commit_description=Description du commit
 pulls.merge_pull_request=Fusionner la Pull Request
 pulls.open_unmerged_pull_exists=`Vous ne pouvez effectuer une réouverture car il y a déjà une pull-request ouverte (#%d) depuis le même dépôt avec les mêmes informations de fusion et est en attente de fusion.`
 pulls.delete_branch=Supprimer la branche
@@ -699,7 +710,7 @@ settings.branch_protection=Protection de branche
 settings.branch_protection_desc=Sélectionnez les options de protection pour la branche <b>%s</b>.
 settings.protect_this_branch=Protéger cette branche
 settings.protect_this_branch_desc=Interdire les push forcés et empêcher la suppression.
-settings.protect_require_pull_request=Exiger une requête de fusion plutôt qu'un push immédiat
+settings.protect_require_pull_request=Exiger une pull request plutôt qu'un push immédiat
 settings.protect_require_pull_request_desc=Activez cette option pour empêcher la publication immédiate vers cette branche. Les commits devront être publiés vers une autre branche (non protégée) et fusionnée dans cette branche avec une requête de fusion.
 settings.protect_whitelist_committers=Liste blanche de personnes pouvant publier sur cette branche
 settings.protect_whitelist_committers_desc=Ajouter des personnes ou des équipes à la liste blanche des fusions directes de cette branche. Les utilisateurs dans cette liste blanche passeront outre la nécessité de valider leurs requêtes de fusion.
@@ -726,7 +737,7 @@ settings.external_wiki_url=URL Wiki externe
 settings.external_wiki_url_desc=Les visiteurs seront redirigés vers cette URL lorsqu'ils cliqueront sur l'onglet.
 settings.issues_desc=Activer le système de tickets
 settings.use_internal_issue_tracker=Utiliser le système simplifié de tickets interne
-settings.allow_public_issues_desc=Permettre l’accès du public aux tickets lorsque le dépôt est privé
+settings.allow_public_issues_desc=Permettre l'accès du public aux tickets lorsque le dépôt est privé
 settings.use_external_issue_tracker=Utiliser un bug-tracker externe
 settings.external_tracker_url=Adresse de l'issue tracker externe
 settings.external_tracker_url_desc=Les visiteurs seront redirigés vers cette URL lorsqu'ils cliqueront sur l'onglet.
@@ -735,7 +746,9 @@ settings.tracker_issue_style=Style de nommage des bugs du tracker externe :
 settings.tracker_issue_style.numeric=Numérique
 settings.tracker_issue_style.alphanumeric=Alphanumérique
 settings.tracker_url_format_desc=Vous pouvez utiliser l'espace réservé <code>{user} {repo} {index}</code> pour le nom d'utilisateur, le nom du dépôt et le numéro de bug.
-settings.pulls_desc=Activer les pull requests pour accepter les contributions publiques
+settings.pulls_desc=Activer les pull requests pour accepter les contributions depuis des dépôts et des branches
+settings.pulls.ignore_whitespace=Ignorer les changements quand ce sont des espaces
+settings.pulls.allow_rebase_merge=Autoriser l'utilisation de rebase pour fusionner les validations
 settings.danger_zone=Zone de danger
 settings.cannot_fork_to_same_owner=Vous ne pouvez par créer un fork d'un dépot à son propriétaire actuel.
 settings.new_owner_has_same_repo=Le nouveau propriétaire a déjà un dépôt nommé ainsi.
@@ -757,7 +770,7 @@ settings.delete=Supprimer ce dépôt
 settings.delete_desc=Attention, cette action est action irréversible. Soyez sûr de vous.
 settings.delete_notices_1=- Cette opération <strong>ne peut pas </strong> être annulée.
 settings.delete_notices_2=- Cette opération supprimera définitivement le dépôt, y compris les données Git, les tickets, les commentaires et les accès des collaborateurs.
-settings.delete_notices_fork_1=-Tous les forks deviendront indépendants après l’effacement.
+settings.delete_notices_fork_1=-Tous les forks deviendront indépendants après l'effacement.
 settings.deletion_success=Le dépôt a été supprimé avec succès!
 settings.update_settings_success=Options mises à jour avec succès.
 settings.transfer_owner=Nouveau propriétaire
@@ -814,10 +827,10 @@ settings.event_push=Push
 settings.event_push_desc=Git push vers un dépôt
 settings.event_issues=Tickets
 settings.event_issues_desc=Ticket ouvert, fermé, réouvert, modifié, assigné, non-assigné, étiquette mise à jour, étiquette nettoyée, jalonnée, ou déjalonnée.
+settings.event_pull_request=Pull Request
+settings.event_pull_request_desc=Pull requests ouverte, fermée, réouverte, modifiée, assignée, non-assignée, étiquette mise à jour, étiquette nettoyée, jalonnée, déjalonnée, ou synchronisée.
 settings.event_issue_comment=Commentaire du ticket
 settings.event_issue_comment_desc=Commentaire du ticket créé, modifié, ou supprimé.
-settings.event_pull_request=Pull Request
-settings.event_pull_request_desc=Requête de fusion ouverte, fermée, réouverte, modifiée, assignée, non-assignée, étiquette mise à jour, étiquette nettoyée, jalonnée, déjalonnée, ou synchronisée.
 settings.event_release=Version publiée
 settings.event_release_desc=Version publiée dans un dépôt.
 settings.active=Actif
@@ -830,6 +843,7 @@ settings.recent_deliveries=Livraisons récentes
 settings.hook_type=Type de Hook
 settings.add_slack_hook_desc=Intégrer <a href="%s"> Slack</a> à votre dépôt.
 settings.add_discord_hook_desc=Ajouter l'intégration de <a href="%s">Discord</a> à votre dépôt.
+settings.add_dingtalk_hook_desc=Ajouter l'intégration de <a href="%s">Dingtalk</a> à votre dépôt.
 settings.slack_token=Jeton
 settings.slack_domain=Domaine
 settings.slack_channel=Canal
@@ -846,6 +860,8 @@ settings.add_key_success=La nouvelle clé de déploiement '%s' a été ajoutée
 settings.deploy_key_deletion=Supprimer la Clé de Déploiement
 settings.deploy_key_deletion_desc=Supprimer cette clé de déploiement effacera tous les accès relatifs pour ce référentiel. Voulez-vous continuer ?
 settings.deploy_key_deletion_success=La clé de déploiement a été supprimée avec succès !
+settings.description_desc=Description du dépôt. 512 caractères maximum.
+settings.description_length=Caractères disponibles
 
 diff.browse_source=Parcourir la source
 diff.parent=Parent
@@ -929,7 +945,7 @@ settings.delete_prompt=Cela supprimera cette organisation définitivement. Cette
 settings.confirm_delete_account=Confirmez la suppression
 settings.delete_org_title=Suppression d'organisation
 settings.delete_org_desc=Cette organisation sera définitivement supprimée. Continuer ?
-settings.hooks_desc=Ajoute des vebhooks qui seront activés pour <strong>tous les dépôts</strong> de cette organisation.
+settings.hooks_desc=Ajoute des webhooks qui seront activés pour <strong>tous les dépôts</strong> de cette organisation.
 
 members.membership_visibility=Visibilité des membres:
 members.public=Public
@@ -1081,11 +1097,12 @@ repos.stars=Votes
 repos.issues=Tickets
 repos.size=Taille
 
-auths.auth_manage_panel=Panel d'administration des authentifications
+auths.auth_sources=Sources d'authentification
 auths.new=Ajouter une nouvelle source d'authentification
 auths.name=Nom
 auths.type=Type
 auths.enabled=Activé
+auths.default=Par défaut
 auths.updated=Mis à jour
 auths.auth_type=Type d'authentification
 auths.auth_name=Nom de l'authentification
@@ -1094,20 +1111,21 @@ auths.domain=Domaine
 auths.host=Hôte
 auths.port=Port
 auths.bind_dn=Bind DN
+auths.bind_dn_helper=Vous pouvez utiliser « %s » qui sera remplacé par le nom d'utilisateur, par exemple « DOM\%s »
 auths.bind_password=Bind mot de passe
 auths.bind_password_helper=Avertissement : Ce mot de passe est stocké en clair. N'utilisez pas le mot de passe d'un compte doté de privilèges élevés.
 auths.user_base=Utilisateur Search Base
 auths.user_dn=Utilisateur DN
 auths.attribute_username=Attribut nom d'utilisateur
 auths.attribute_username_placeholder=Laisser vide pour utiliser la valeur du formulaire d'authentification comme nom d'utilisateur.
-auths.attribute_name=First Name Attribute
+auths.attribute_name=Attribut du prénom
 auths.attribute_surname=Attribut du nom de famille
 auths.attribute_mail=Attribut de l'e-mail
-auths.verify_group_membership=Verify group membership
-auths.group_search_base_dn=Group Search Base DN
-auths.group_filter=Group Filter
-auths.group_attribute_contain_user_list=Group Attribute Containing List of Users
-auths.user_attribute_listed_in_group=User Attribute Listed in Group
+auths.verify_group_membership=Vérifier l'appartenance à un groupe
+auths.group_search_base_dn=Recherche de groupe basée sur le nom de domaine
+auths.group_filter=Filtre par groupe
+auths.group_attribute_contain_user_list=Attribut de groupe contenant la liste des utilisateurs
+auths.user_attribute_listed_in_group=Attribut de l'utilisateur listé dans le groupe
 auths.attributes_in_bind=Aller chercher les attributs dans le contexte de liaison DN
 auths.filter=Filtre utilisateur
 auths.admin_filter=Filtre administrateur
@@ -1121,9 +1139,9 @@ auths.enable_tls=Activer le Chiffrement TLS
 auths.skip_tls_verify=Ne pas vérifier TLS
 auths.pam_service_name=Nom du Service PAM
 auths.enable_auto_register=Connexion Automatique
-auths.tips=Conseils
 auths.edit=Modifier les paramètres d'authentification
 auths.activated=Authentification activée
+auths.default_auth=Cette authentification est la source de connexion par défaut
 auths.new_success=Nouvelle authentification «%s » a été ajoutée avec succès.
 auths.update_success=Les paramètre d'authentification a été mis à jour avec succès.
 auths.update=Mettre à jour les paramètres d'authentifications
@@ -1134,6 +1152,7 @@ auths.still_in_used=Cette authentification est encore utilisée par d'autres uti
 auths.deletion_success=L'authentification a été supprimée avec succès !
 auths.login_source_exist=La source de connexion « %s » existe déjà.
 
+config.not_set=(non défini)
 config.server_config=Configuration du Serveur
 config.app_name=Nom de l'application
 config.app_ver=Version de l'application
@@ -1155,6 +1174,7 @@ config.ssh_domain=Domaine
 config.ssh_port=Port
 config.ssh_listen_port=Port d'écoute
 config.ssh_root_path=Emplacement racine
+config.ssh_rewrite_authorized_keys_at_start=Réécrire authorized_keys au démarrage
 config.ssh_key_test_path=Chemin de test des clés
 config.ssh_keygen_path=Chemin vers le générateur de clefs ("ssh-keygen")
 config.ssh_minimum_key_size_check=Vérification de la longueur de clé minimale
@@ -1170,6 +1190,9 @@ config.disable_http_git=Désactiver Git HTTP
 config.enable_local_path_migration=Activer la migration de chemin locale
 config.commits_fetch_concurrency=Concurrence des récupérations de commits
 
+config.http_config=Configuration HTTP
+config.http_access_control_allow_origin=Autoriser le partage d’accès avec l’origine
+
 config.db_config=Configuration de la Base de Données
 config.db_type=Type
 config.db_host=Hôte
@@ -1199,7 +1222,7 @@ config.skip_tls_verify=Ne pas vérifier TLS
 config.mailer_config=Configuration du service de mail
 config.mailer_enabled=Activé
 config.mailer_disable_helo=Désactiver HELO
-config.mailer_name=Nom
+config.mailer_subject_prefix=Préfixe du sujet
 config.mailer_host=Hôte
 config.mailer_user=Utilisateur
 config.send_test_mail=Envoyer courriel de Test
@@ -1262,7 +1285,7 @@ notices.actions=Actions
 notices.select_all=Tout Sélectionner
 notices.deselect_all=Tous déselectionner
 notices.inverse_selection=Inverser la sélection
-notices.delete_selected=Supprimé les éléments sélectionnés
+notices.delete_selected=Supprimer les éléments sélectionnés
 notices.delete_all=Supprimer toutes les notifications
 notices.type=Type
 notices.type_1=Dépôt
@@ -1272,7 +1295,6 @@ notices.delete_success=Notifications système supprimées avec succès.
 
 [action]
 create_repo=a créé le dépôt <a href="%s">%s</a>
-fork_repo=a créé sa branche du dépôt vers <a href="%s">%s</a>
 rename_repo=a rebaptisé le dépôt de <code>%[1]s</code> vers <a href="%[2]s">%[3]s</a>
 commit_repo=a commité dans <a href="%[1]s/src/%[2]s">%[3]s</a> sur <a href="%[1]s">%[4]s</a>
 compare_commits=Comparer ces %d commits
@@ -1282,13 +1304,17 @@ close_issue=`tickets clos <a href="%s/issues/%s">%s#%[2]s</a>`
 reopen_issue=`tickets ré-ouverts <a href="%s/issues/%s">%s#%[2]s</a>`
 comment_issue=`a commenté le problème <a href="%s/issues/%s">%s#%[2]s</a>`
 create_pull_request=`pull request créée le <a href="%s/pulls/%s">%s#%[2]s</a>`
-close_pull_request=`pull request fermé <a href="%s/pulls/%s">%s#%[2]s</a>`
+close_pull_request=`pull request fermée <a href="%s/pulls/%s">%s#%[2]s</a>`
 reopen_pull_request=`pull request ré-ouverte <a href="%s/pulls/%s">%s#%[2]s</a>`
 merge_pull_request=`pull request fusionné le <a href="%s/pulls/%s">%s#%[2]s</a>`
 create_branch=nouvelle branche créée <a href="%[1]s/src/%[2]s">%[3]s</a> sur <a href="%[1]s">%[4]s</a>
 delete_branch=branche supprimée <code>%[2]s</code> sur <a href="%[1]s">%[3]s</a>
 push_tag=a soumis le tag <a href="%s/src/%s">%[2]s</a> sur <a href="%[1]s">%[3]s</a>
 delete_tag=étiquette supprimée <code>%[2]s</code> sur <a href="%[1]s">%[3]s</a>
+fork_repo=a créé sa branche du dépôt vers <a href="%s">%s</a>
+mirror_sync_push=a commité dans <a href="%[1]s/src/%[2]s">%[3]s</a> sur <a href="%[1]s">%[4]s</a>
+mirror_sync_create=a synchronisé la nouvelle référence <a href="%s/src/%s">%[2]s</a> vers <a href="%[1]s">%[3]s</a> depuis le miroir
+mirror_sync_delete=Référence synchronisés et supprimé <code>%[2]s</code> sur <a href="%[1]s">%[3]s</a>
 
 [tool]
 ago=il y a

conf/locale/locale_gl-ES.ini

@@ -48,7 +48,7 @@ cancel=Cancelar
 install=Instalación
 title=Pasos da instalación por primeira vez
 docker_helper=Se está executando Gogs usando Docker, por favor lea <a target="_blank" href="%s"> estas pautas</a> antes de cambiar nada nesta páxina!
-requite_db_desc=Gogs requires MySQL, PostgreSQL, SQLite3, MSSQL or TiDB.
+requite_db_desc=Gogs require MySQL, PostgreSQL, SQLite3, MSSQL ouTiDB.
 db_title=Configuración de base de datos
 db_type=Tipo de base de datos
 host=Host
@@ -58,8 +58,8 @@ db_name=Nome da base de datos
 db_helper=Por favor, empregue o motor INNODB coa configuración de caracteres utf8_general_ci para MySQL.
 ssl_mode=Modo SSL
 path=Ruta
-sqlite_helper=The file path of SQLite3 database. <br>Please use absolute path when you start as service.
-err_empty_db_path=SQLite3 database path cannot be empty.
+sqlite_helper=A ruta do ficheiro da base de datos SQLite3. <br> Utilice a ruta absoluta cando arrique o servicio.
+err_empty_db_path=A ruta da base de datos SQLite3 non pode estar baleira.
 no_admin_and_disable_registration=Non pode deshabilitar o rexistro sen crear unha conta de administrador.
 err_empty_admin_password=O contrasinal de administrador non pode estar baleiro.
 
@@ -74,16 +74,16 @@ domain=Dominio
 domain_helper=Isto afecta ás URLs para clonar por SSH.
 ssh_port=Porto SSH
 ssh_port_helper=Número de porto do seu servidor SSH, déixeo en branco para desactivar SSH.
-use_builtin_ssh_server=Use Builtin SSH Server
-use_builtin_ssh_server_popup=Start builtin SSH server for Git operations to distinguish from system SSH daemon.
+use_builtin_ssh_server=Utilizar Builin en Sevidor SSH
+use_builtin_ssh_server_popup=Inicia o servidor SSH integrado para que as operacións de Git sexan distintas do demonio SSH do sistema.
 http_port=Porto HTTP
 http_port_helper=Porto no que escoitará a aplicación.
 app_url=URL da aplicación
 app_url_helper=Isto afecta ás URLs para clonar por HTTP/HTTPS e a algúns correos electrónicos.
 log_root_path=Ruta do rexistro
 log_root_path_helper=Directorio onde almacenar os rexistros.
-enable_console_mode=Enable Console Mode
-enable_console_mode_popup=In addition to file mode, also print logs to console.
+enable_console_mode=Habilitar Modo Consola
+enable_console_mode_popup=Ademáis do modo de ficheiro, tamén imprime os rexistros para a consola.
 
 optional_title=Configuración opcional
 email_title=Configuración do servizo de correo
@@ -119,7 +119,8 @@ sqlite3_not_available=A túa versión non soporta SQLite3, por favor, descarga o
 invalid_db_setting=A configuración da base de datos non é correcta: %v
 invalid_repo_path=A ruta da raíz do repositorio é inválida: %v
 run_user_not_match=A persoa usuaria que está executando a aplicación non é a persoa usuaria actual: %s -> %s
-smtp_host_missing_port=SMTP Host is missing port in address.
+smtp_host_missing_port=Falta o porto do Host SMTP
+
 invalid_smtp_from=O campo From do SMTP non é valido: %v
 save_config_failed=Erro ao gardar a configuración: %v
 invalid_admin_setting=A configuración da conta de administración é inválida: %v
@@ -151,6 +152,8 @@ register_hepler_msg=Xa tes unha conta? Inicia sesión!
 social_register_hepler_msg=Xa tes unha conta? Enlázaa!
 disable_register_prompt=Sentímolo, o rexistro está deshabilitado. Por favor, contacta co administrador do sitio.
 disable_register_mail=Sentímolo. Os correos de confirmación de rexistro están deshabilitados.
+auth_source=Fonte de Autenticación
+local=Configuración rexional
 remember_me=Recórdame
 forgot_password=Esquecín o meu contrasinal
 forget_password=Esqueciches o teu contrasinal?
@@ -169,13 +172,13 @@ reset_password_helper=Prema aquí para restablecer o seu contrasinal
 password_too_short=A lonxitude do contrasinal non pode ser menor de 6.
 non_local_account=Contas que non son locais non poden cambiar os contrasinais a través de Gogs.
 
-login_two_factor=Two-factor Authentication
-login_two_factor_passcode=Authentication Passcode
-login_two_factor_enter_recovery_code=Enter a two-factor recovery code
-login_two_factor_recovery=Two-factor Recovery
-login_two_factor_recovery_code=Recovery Code
-login_two_factor_enter_passcode=Enter a two-factor passcode
-login_two_factor_invalid_recovery_code=Recovery code has been used or does not valid.
+login_two_factor=Autenticación en dous pasos
+login_two_factor_passcode=Código de Autenticación
+login_two_factor_enter_recovery_code=Introduza o código de recuperación da verificación en dous pasos
+login_two_factor_recovery=Recuperación en dous pasos
+login_two_factor_recovery_code=Codigo de Recuperación
+login_two_factor_enter_passcode=Introduza o código de acceso en dous pasos
+login_two_factor_invalid_recovery_code=O código de recuperación foi usado ou non é válido.
 
 [mail]
 activate_account=Por favor, activa a túa conta
@@ -212,7 +215,7 @@ Content=Contido
 require_error=` non pode estar baleiro.`
 alpha_dash_error=` os caracteres deben ser alfanuméricos ou dash(-_).`
 alpha_dash_dot_error=` debe ser un carácter alfanumérivo válido, un guión alto ou baixo (-_) ou un signo de puntuación.`
-alpha_dash_dot_slash_error=` must be valid alpha or numeric or dash(-_) or dot characters or slashes.`
+alpha_dash_dot_slash_error=` debe ser un carácter válido : numérico, alfabético, guión(-_)  puntos ou barras.`
 size_error=` debe ser de tamaño %s.`
 min_size_error=` debe conter polo menos %s caracteres.`
 max_size_error=` debe conter como máximo %s caracteres.`
@@ -229,6 +232,7 @@ org_name_been_taken=Xa existe unha organización con este nome.
 team_name_been_taken=Xa existe un equipo con este nome.
 email_been_used=Este enderezo de correo electrónico xa está en uso.
 username_password_incorrect=Nome de usuario ou contrasinal incorrectos.
+auth_source_mismatch=A fonte de autenticación seleccionada non está asociada co usuario.
 enterred_invalid_repo_name=Por favor, asegúrate de que introduciches correctamente o nome do repositorio.
 enterred_invalid_owner_name=Por favor, asegúrate de que introduciches correctamente o nome do propietario.
 enterred_invalid_password=Por favor, asegúrate de que introduciches correctamente o teu contrasinal.
@@ -264,8 +268,8 @@ profile=Perfil
 password=Contrasinal
 avatar=Avatar
 ssh_keys=Claves SSH
-security=Security
-repos=Repositories
+security=Seguridade
+repos=Repositorios
 orgs=Organizacións
 applications=Aplicacións
 delete=Eliminar conta
@@ -334,28 +338,29 @@ no_activity=Non hai actividade recente
 key_state_desc=Esta clave foi usada nos últimos 7 días
 token_state_desc=Token usado nos últimos 7 días
 
-two_factor=Two-factor Authentication
-two_factor_status=Status:
-two_factor_on=On
-two_factor_off=Off
-two_factor_enable=Enable
-two_factor_disable=Disable
+two_factor=Autenticación en Dous Pasos
+two_factor_status=Estado:
+two_factor_on=Si
+two_factor_off=Non
+two_factor_enable=Activar
+two_factor_disable=Desactivar
 two_factor_view_recovery_codes=View and save <a href="%s%s">your recovery codes</a> in a safe place. You can use them as passcode if you lose access to your authentication application.
 two_factor_http=For HTTP/HTTPS operations, you are no longer able to use plain username and password. Please create and use <a href="%[1]s%[2]s">Personal Access Token</a> as your credential, e.g. <code>%[3]s</code>.
 two_factor_enable_title=Enable Two-factor Authentication
 two_factor_scan_qr=Please use your authentication application to scan the image:
 two_factor_or_enter_secret=Or enter the secret:
-two_factor_then_enter_passcode=Then enter passcode:
-two_factor_verify=Verify
+two_factor_then_enter_passcode=A continuación, introduza o código:
+two_factor_verify=Verificar
 two_factor_invalid_passcode=The passcode you entered is not valid, please try again!
+two_factor_reused_passcode=The passcode you entered has already been used, please try another one!
 two_factor_enable_error=Enable Two-factor authentication failed: %v
 two_factor_enable_success=Two-factor authentication has enabled for your account successfully!
 two_factor_recovery_codes_title=Two-factor Authentication Recovery Codes
 two_factor_recovery_codes_desc=Recovery codes are used when you temporarily lose access to your authentication application. Each recovery code can only be used once, <b>please keep these codes in a safe place</b>.
-two_factor_regenerate_recovery_codes=Regenerate Recovery Codes
+two_factor_regenerate_recovery_codes=Rexenerar Códigos de Recuperación
 two_factor_regenerate_recovery_codes_error=Regenerate recovery codes failed: %v
 two_factor_regenerate_recovery_codes_success=New recovery codes has been generated successfully!
-two_factor_disable_title=Disable Two-factor Authentication
+two_factor_disable_title=Desactivar a verificación en dous pasos
 two_factor_disable_desc=Your account security level will decrease after disabled two-factor authentication. Do you want to continue?
 two_factor_disable_success=Two-factor authentication has disabled successfully!
 
@@ -375,8 +380,8 @@ orgs.none=Non es membro de nengunha organización.
 orgs.leave_title=Deixar unha organización
 orgs.leave_desc=Deixarás de ter aceso ao tódolos repositorios e equipos despois de deixar a organización. Desexas abandonala?
 
-repos.leave=Leave
-repos.leave_title=Leave repository
+repos.leave=Abandoar
+repos.leave_title=Deixar repositorio
 repos.leave_desc=You will lose access to the repository after you left. Do you want to continue?
 repos.leave_success=You have left repository '%s' successfully!
 
@@ -417,6 +422,8 @@ mirror_last_synced=Sincronizado por última vez
 watchers=Seguidores
 stargazers=Fans
 forks=Forks
+repo_description_helper=Description of repository. Maximum 512 characters length.
+repo_description_length=Available characters
 
 form.reach_limit_of_creation=El propietario ha alcanzado el límite máximo de %d repositorios creados.=O propietario acadou o límite máximo de %d repositorios creados.
 form.name_reserved=El nombre del repositorio '%s' está reservado.=O nome do repositorio '%s' está reservado.
@@ -514,6 +521,7 @@ editor.file_changed_while_editing=O contido do arquivo cambiou desde que comezac
 editor.file_already_exists=Un arquivo co nome '%s' xa existe no repositorio.
 editor.no_changes_to_show=Non hai cambios que mostrar.
 editor.fail_to_update_file=Fallou o actualizar/crear o arquivo '%s' co erro: %v
+editor.fail_to_delete_file=Failed to delete file '%s' with error: %v
 editor.add_subdir=Engadir subdirectorio...
 editor.unable_to_upload_files=Fallou ao subir arquivos a '%s' co erro: %v
 editor.upload_files_to_dir=Subir arquivos a '%s'
@@ -616,6 +624,7 @@ pulls.compare_compare=comparar con
 pulls.filter_branch=Filtrar rama
 pulls.no_results=Sen resultados.
 pulls.nothing_to_compare=Nada que comparar. As dúas ramas coinciden.
+pulls.nothing_merge_base=There is nothing to compare because two branches have completely different history.
 pulls.has_pull_request=`Xa existe un pull request entre estas dúas ramas: <a href="%[1]s/pulls/%[3]d">%[2]s#%[3]d</a>`
 pulls.create=Crear Pull Request
 pulls.title_desc=desexa fusionar %[1]d achegas de <code>%[2]s</code> en <code>%[3]s</code>
@@ -631,6 +640,9 @@ pulls.is_checking=Estase procedendo á busca de conflitos, por favor, actualice
 pulls.can_auto_merge_desc=Este Pull Request pode ser fusionado automaticamente.
 pulls.cannot_auto_merge_desc=Este Pull Request non pode ser fusionado automaticamente porque hai conflitos.
 pulls.cannot_auto_merge_helper=Por favor, fusiona manualmente para resolver os conflitos.
+pulls.create_merge_commit=Create a merge commit
+pulls.rebase_before_merging=Rebase before merging
+pulls.commit_description=Commit Description
 pulls.merge_pull_request=Fusionar Pull Request
 pulls.open_unmerged_pull_exists=`Vostede non pode realizar a operación de reapertura porque nestes momentos existe unha solicitude de pull request (#%d) para o mesmo repositorio coa mesma información que se encontra á espera de aprobación`
 pulls.delete_branch=Eliminar branch
@@ -735,7 +747,9 @@ settings.tracker_issue_style=Estilo de etiquetaxe do tracker externo de incidenc
 settings.tracker_issue_style.numeric=Numérico
 settings.tracker_issue_style.alphanumeric=Alfanumérico
 settings.tracker_url_format_desc=Podes usar os modelos <code>{user} {repo} {index}</code> para o nome de usuario, nome do repositorio e índice da incidencia.
-settings.pulls_desc=Habilitar Pull Requests para aceptar contribucións públicas
+settings.pulls_desc=Enable pull requests to accept contributions between repositories and branches
+settings.pulls.ignore_whitespace=Ignore changes in whitespace
+settings.pulls.allow_rebase_merge=Allow use rebase to merge commits
 settings.danger_zone=Zona de perigo
 settings.cannot_fork_to_same_owner=You cannot fork a repository to its original owner.
 settings.new_owner_has_same_repo=O novo propietario ten un repositorio co mesmo nome.
@@ -756,7 +770,7 @@ settings.wiki_deletion_success=Os datos da wiki do repositorio foron borrados co
 settings.delete=Eliminar este repositorio
 settings.delete_desc=Unha vez que eliminaches un repositorio, non hai volta atrás. Por favor, asegúrate de que é o que queres.
 settings.delete_notices_1=- Esta operación <strong>NON SE PODE</strong> reverter.
-settings.delete_notices_2=- Esta operación eliminará de maneira permanente todo o contido deste repositorio, incluíndo os datos de git, as incidencias, os comentarios e os permisos de acceso dos colaboradores.
+settings.delete_notices_2=- This operation will permanently delete everything in this repository, including Git data, issues, comments and collaborator access.
 settings.delete_notices_fork_1=- Todos os forks converteranse en independentes tras o borrado.
 settings.deletion_success=O repositorio foi eliminado satisfactoriamente!
 settings.update_settings_success=As opcións do repositorio actualizáronse correctamente.
@@ -814,10 +828,10 @@ settings.event_push=Push
 settings.event_push_desc=Git push a un repositorio
 settings.event_issues=Issues
 settings.event_issues_desc=Issue opened, closed, reopened, edited, assigned, unassigned, label updated, label cleared, milestoned, or demilestoned.
-settings.event_issue_comment=Issue Comment
-settings.event_issue_comment_desc=Issue comment created, edited, or deleted.
 settings.event_pull_request=Pull Request
 settings.event_pull_request_desc=Pull request opened, closed, reopened, edited, assigned, unassigned, label updated, label cleared, milestoned, demilestoned, or synchronized.
+settings.event_issue_comment=Issue Comment
+settings.event_issue_comment_desc=Issue comment created, edited, or deleted.
 settings.event_release=Release
 settings.event_release_desc=Release published in a repository.
 settings.active=Activo
@@ -830,6 +844,7 @@ settings.recent_deliveries=Envíos recentes
 settings.hook_type=Tipo de Hook
 settings.add_slack_hook_desc=Engade integración con <a href="%s">Slack</a> ao teu repositorio.
 settings.add_discord_hook_desc=Add <a href="%s">Discord</a> integration to your repository.
+settings.add_dingtalk_hook_desc=Add <a href="%s">Dingtalk</a> integration to your repository.
 settings.slack_token=Token
 settings.slack_domain=Dominio
 settings.slack_channel=Canle
@@ -846,6 +861,8 @@ settings.add_key_success=A nova clave de despregamento '%s' foi creada con éxit
 settings.deploy_key_deletion=Eliminar clave de despregamento
 settings.deploy_key_deletion_desc=Ao eliminar esta clave de despregamento perderase o permiso de acceso a este repositorio coa dita clave. Desexas continuar?
 settings.deploy_key_deletion_success=Clave de despregamento eliminada con éxito!
+settings.description_desc=Description of repository. Maximum 512 characters length.
+settings.description_length=Available characters
 
 diff.browse_source=Explorar o código
 diff.parent=pai
@@ -1081,11 +1098,12 @@ repos.stars=Estrelas
 repos.issues=Incidencias
 repos.size=Size
 
-auths.auth_manage_panel=Panel de administración de autenticación
+auths.auth_sources=Authentication Sources
 auths.new=Engadir nova orixe
 auths.name=Nome
 auths.type=Tipo
 auths.enabled=Activo
+auths.default=Default
 auths.updated=Actualizado
 auths.auth_type=Tipo de autenticación
 auths.auth_name=Nome de autenticación
@@ -1094,6 +1112,7 @@ auths.domain=Dominio
 auths.host=Host
 auths.port=Porto
 auths.bind_dn=Bind DN
+auths.bind_dn_helper=You can use '%s' as placeholder for username, e.g. DOM\%s
 auths.bind_password=Contrasinal Bind
 auths.bind_password_helper=Advertencia: o contrasinal almacénase como texto plano. Non empregue unha conta con privilexios elevados.
 auths.user_base=Base de busca de usuarios
@@ -1121,9 +1140,9 @@ auths.enable_tls=Habilitar cifrado TLS
 auths.skip_tls_verify=Omitir a verificación TLS
 auths.pam_service_name=Nome do servizo PAM
 auths.enable_auto_register=Habilitar auto-rexistro
-auths.tips=Consellos
 auths.edit=Editar a configuración de autenticación
 auths.activated=Esta autenticación foi activada
+auths.default_auth=This authentication is default login source
 auths.new_success=A autenticación '%s' foi engadida con éxito!
 auths.update_success=A configuración de autenticación foi actualizada con éxito.
 auths.update=Actualizar a configuración de autenticación
@@ -1134,6 +1153,7 @@ auths.still_in_used=Este método de autentificación aínda é utilizado por alg
 auths.deletion_success=A autenticación foi eliminada con éxito!
 auths.login_source_exist=Login source '%s' xa existe.
 
+config.not_set=(not set)
 config.server_config=Configuración do servidor
 config.app_name=Nome da aplicación
 config.app_ver=Versión da aplicación
@@ -1155,6 +1175,7 @@ config.ssh_domain=Dominio
 config.ssh_port=Porto
 config.ssh_listen_port=Porto de escoita
 config.ssh_root_path=Ruta raíz
+config.ssh_rewrite_authorized_keys_at_start=Rewrite authorized_keys At Start
 config.ssh_key_test_path=Ruta da clave de proba
 config.ssh_keygen_path=Ruta do xerador de claves ('ssh-keygen')
 config.ssh_minimum_key_size_check=Tamaño mínimo da clave de verificación
@@ -1170,6 +1191,9 @@ config.disable_http_git=Disable HTTP Git
 config.enable_local_path_migration=Enable Local Path Migration
 config.commits_fetch_concurrency=Commits Fetch Concurrency
 
+config.http_config=HTTP Configuration
+config.http_access_control_allow_origin=Access Control Allow Origin
+
 config.db_config=Configuración da base de datos
 config.db_type=Tipo
 config.db_host=Host
@@ -1199,7 +1223,7 @@ config.skip_tls_verify=Omitir a verificación TLS
 config.mailer_config=Configuración do servidor de correo
 config.mailer_enabled=Activado
 config.mailer_disable_helo=Desactivar HELO
-config.mailer_name=Nome
+config.mailer_subject_prefix=Subject Prefix
 config.mailer_host=Host
 config.mailer_user=Usuario
 config.send_test_mail=Enviar correo electrónico de proba
@@ -1272,7 +1296,6 @@ notices.delete_success=As notificacións do sistema foron eliminadas satisfactor
 
 [action]
 create_repo=creou o repositorio <a href="%s">%s</a>
-fork_repo=forked a repository to <a href="%s">%s</a>
 rename_repo=repositorio renomeado de <code>%[1]s</code> a <a href="%[2]s">%[3]s</a>
 commit_repo=fixo push a <a href="%[1]s/src/%[2]s">%[3]s</a> en <a href="%[1]s">%[4]s</a>
 compare_commits=Ver comparación destas %d achegas
@@ -1289,6 +1312,10 @@ create_branch=created new branch <a href="%[1]s/src/%[2]s">%[3]s</a> at <a href=
 delete_branch=deleted branch <code>%[2]s</code> at <a href="%[1]s">%[3]s</a>
 push_tag=fixo push do tag <a href="%s/src/%s">%[2]s</a> a <a href="%[1]s">%[3]s</a>
 delete_tag=deleted tag <code>%[2]s</code> at <a href="%[1]s">%[3]s</a>
+fork_repo=forked a repository to <a href="%s">%s</a>
+mirror_sync_push=synced commits to <a href="%[1]s/src/%[2]s">%[3]s</a> at <a href="%[1]s">%[4]s</a> from mirror
+mirror_sync_create=synced new reference <a href="%s/src/%s">%[2]s</a> to <a href="%[1]s">%[3]s</a> from mirror
+mirror_sync_delete=synced and deleted reference <code>%[2]s</code> at <a href="%[1]s">%[3]s</a> from mirror
 
 [tool]
 ago=hai

conf/locale/locale_hu-HU.ini

@@ -1,7 +1,7 @@
 app_desc=Fájdalommentes, saját gépre telepíthető Git szolgáltatás
 
 home=Kezdőlap
-dashboard=Vezérlőpult
+dashboard=Áttekintés
 explore=Felfedezés
 help=Súgó
 sign_in=Bejelentkezés
@@ -27,7 +27,7 @@ repository=Tároló
 organization=Szervezet
 mirror=Tükör
 new_repo=Új tároló
-new_migrate=Új költözés
+new_migrate=Új migráció
 new_mirror=Új tükör
 new_fork=Új tároló másolása
 new_org=Új szervezet
@@ -35,8 +35,8 @@ manage_org=Szervezetek kezelése
 admin_panel=Rendszergazdai felület
 account_settings=Fiók beállításai
 settings=Beállítások
-your_profile=Profilod
-your_settings=Beállításaid
+your_profile=Profilom
+your_settings=Beállításaim
 
 activities=Tevékenységek
 pull_requests=Pull request-ek
@@ -47,7 +47,7 @@ cancel=Mégse
 [install]
 install=Telepítés
 title=Telepítés első indításkor
-docker_helper=Ha a Docker alatt futtatod a Gogs-ot, olvasd el az <a target="_blank" href="%s">irányelveket</a> figyelmesen, mielőtt bármit megváltoztatsz ezen az oldalon!
+docker_helper=Ha Docker alatt fut a Gogs, akkor kérjük, figyelmesen olvassa el az <a target="_blank" href="%s">irányelveket</a>, mielőtt bármit megváltoztat ezen az oldalon!
 requite_db_desc=A Gogs-hoz szükséges a MySQL, PostgreSQL, SQLite3, MSSQL vagy a TiDB valamelyike.
 db_title=Adatbázis beállításai
 db_type=Adatbázis-kezelő
@@ -55,25 +55,25 @@ host=Kiszolgáló
 user=Felhasználónév
 password=Jelszó
 db_name=Adatbázis neve
-db_helper=MySQL szerveren használj INNODB motort utf8_general_ci karakterkészlettel.
+db_helper=MySQL szerveren kérjük használjon INNODB motort utf8_general_ci karakterkészlettel.
 ssl_mode=SSL mód
 path=Elérési út
 sqlite_helper=SQLite3 vagy a TiDB adatbázis fájljának elérési útvonala. <br>Kérjük használja az abszolút elérési utat, a szolgáltatás indításakor.
 err_empty_db_path=SQLite3 adatbázis elérési út nem lehet üres.
-no_admin_and_disable_registration=Nem tilthatod le a regisztrációt, amíg nem hozol létre egy rendszergazdai fiókot.
+no_admin_and_disable_registration=Nem tilthatja le a regisztrációt, amíg nem hoz létre egy rendszergazdai fiókot.
 err_empty_admin_password=Rendszergazdai jelszó nem lehet üres.
 
 general_title=Alkalmazás általános beállításai
 app_name=Alkalmazás neve
-app_name_helper=Adj meg valami izgalmas nevet!
+app_name_helper=Adjon meg valami izgalmas nevet!
 repo_path=Tárolók alapkönyvtára
 repo_path_helper=Ebben a könyvtárban lesznek a Git tárolók.
 run_user=Futtató felhasználó
 run_user_helper=Ezen felhasználónak jogosultnak kell lennie a tárolók elérésére és a Gogs futtatására.
 domain=Tartomány
-domain_helper=Ez az alapja az SSH másolás URL címének.
+domain_helper=Ez befolyásolja az SSH klón URL-eket.
 ssh_port=SSH port
-ssh_port_helper=Az SSH kiszolgáló portszáma, hagyd üresen az SSH letiltásához.
+ssh_port_helper=Ezt a portot fogja használni az SSH szerver, hagyja üresen az SSH letiltásához.
 use_builtin_ssh_server=Beépített SSH szerver használata
 use_builtin_ssh_server_popup=Indítsa el a beépített SSH szervert a Git műveletekhez elkülönítve a rendszer SSH démontól.
 http_port=HTTP port
@@ -107,7 +107,7 @@ enable_captcha=Ellenőrző kód engedélyezése
 enable_captcha_popup=Ellenőrző kódot kér a felhasználói regisztrációnál.
 require_sign_in_view=Bejelentkezés megkövetelése az oldalak megtekintéséhez
 require_sign_in_view_popup=Csak bejelentkezett felhasználók nézhetik meg az oldalakat; a látogatók csak a bejelentkező oldalt láthatják.
-admin_setting_desc=Nem szükséges beállítanod rendszergazdai fiókot, az első felhasználó (ID=1) automatikusan rendszergazdai jogokat kap.
+admin_setting_desc=Nem szükséges most beállítania rendszergazdai fiókot, mert az első felhasználó (ID=1) automatikusan rendszergazdai jogokat kap.
 admin_title=Rendszergazda fiók beállításai
 admin_name=Felhasználónév
 admin_password=Jelszó
@@ -147,14 +147,16 @@ search=Keresés
 
 [auth]
 create_new_account=Új fiók létrehozása
-register_hepler_msg=Van már felhasználói fiókod? Jelentkezz be!
+register_hepler_msg=Van már felhasználói fiókja? Jelentkezz be!
 social_register_hepler_msg=Van már fiókod? Csatold most!
 disable_register_prompt=Elnézést, a regisztrációt kikapcsolták. Kérlek szólj az oldal adminisztrátorának.
 disable_register_mail=Elnézést, az email regisztráció megerősítését kikapcsolták.
+auth_source=Hitelesítési forrás
+local=Helyi
 remember_me=Emlékezz rám
 forgot_password=Elfelejtett jelszó
-forget_password=Elfelejtetted a jelszavad?
-sign_up_now=Szeretnél bejelentkezni? Regisztrálj most.
+forget_password=Elfelejtette a jelszavát?
+sign_up_now=Szeretne bejelentkezni? Regisztráljon most.
 confirmation_mail_sent_prompt=Új megerősítő emailt küldtünk <b>%s</b> címre, kérlek keresd a postafiókodban az elkövetkező %d órában, hogy befejezhesd a regisztrációs folyamatot.
 active_your_account=Aktiváld a fiókod
 prohibit_login=A bejelentkezés tiltva
@@ -165,7 +167,7 @@ resend_mail=Kattints ide hogy újraküldd az aktiváló emailt
 send_reset_mail=Kattints ide hogy újraküldd a jelszó visszaállító emailt
 reset_password=Jelszó visszaállítása
 invalid_code=Elnézést, a megerősítő kód lejárt vagy hibás.
-reset_password_helper=Kattints ide hogy visszaállítsd a jelszavad
+reset_password_helper=A jelszó visszaállításához kattintson ide
 password_too_short=A jelszó nem lehet 6-nál rövidebb.
 non_local_account=Nem helyi felhasználó nem cserélhet jelszót a Gogsban.
 
@@ -181,7 +183,7 @@ login_two_factor_invalid_recovery_code=Helyreállító kód már felhasználásr
 activate_account=Kérlek aktiváld a fiókod
 activate_email=Ellenőrizd az email címed
 reset_password=Állítsd vissza a jelszavad
-register_success=Sikeres regisztráció, üdvözlünk
+register_success=Sikeres regisztráció, üdvözöljük
 register_notify=Üdvözlünk a fedélzeten
 
 [modal]
@@ -229,8 +231,9 @@ org_name_been_taken=A szervezet neve már foglalt.
 team_name_been_taken=Az a csapatnév már foglalt.
 email_been_used=Ezt az email címet már felhasználták.
 username_password_incorrect=Felhasználó név vagy jelszó hibás.
-enterred_invalid_repo_name=Kérlek ellenőrizd, hogy a tároló neve helyes.
-enterred_invalid_owner_name=Kérlek ellenőrizd, hogy a tulajdonos neve helyes.
+auth_source_mismatch=A kijelölt hitelesítési forráshoz nincs társítva a felhasználó.
+enterred_invalid_repo_name=Kérjük, ellenőrizze, hogy a tároló neve helyes.
+enterred_invalid_owner_name=Kérjük, ellenőrizze, hogy a tulajdonos neve helyes.
 enterred_invalid_password=Kérlek ellenőrizd, hogy a beírt jelszó helyes.
 user_not_exist=A megadott felhasználó nem létezik.
 last_org_owner=Az utolsó felhasználót nem lehet eltávolítani a csapatból, mert egy tulajdonos kell legyen minden szervezetben.
@@ -241,7 +244,7 @@ auth_failed=Hitelesítési hiba: %v
 
 still_own_repo=A felhasználód még legalább egy tároló tulajdonosa, először törölnöd kell őket vagy átadni másnak a tulajdonjogaikat.
 still_has_org=A fiókod még mindig tagja legalább egy szervezetnek. Először ki kell lépned vagy törölnöd kell a tagságodat.
-org_still_own_repo=Ez a szervezet még repository-k tulajdonosa. Először töröld vagy ruházd át őket.
+org_still_own_repo=Ez a szervezet továbbra is tulajdonosa tárolóknak, ezért előbb törölje vagy adja át másnak a tárolókat.
 
 target_branch_not_exist=Cél branch nem létezik.
 
@@ -256,7 +259,7 @@ following=Követve
 follow=Követés
 unfollow=Követés törlése
 
-form.name_reserved=Felhasználónév '%s' foglalt.
+form.name_reserved='%s' felhasználónév már foglalt.
 form.name_pattern_not_allowed=A felhasználónév ('%s') nem engedélyezett.
 
 [settings]
@@ -302,12 +305,12 @@ password_change_disabled=Csak helyi felhasználók változtathatják meg jelszav
 
 emails=E-mail címek
 manage_emails=E-mail címek kezelése
-email_desc=Elsődleges e-mail címedet használjuk értesítésekre és más műveletekre.
+email_desc=Elsődleges e-mail címét használjuk értesítésekre és más műveletekre.
 primary=Elsődleges
 primary_email=Beállítás elsődlegesként
 delete_email=Törlés
 email_deletion=E-mail cím törlése
-email_deletion_desc=Az e-mail cím törlése kapcsolódó adatokat is eltávolít a fiókodból. Biztosan folytatod?
+email_deletion_desc=Az e-mail cím törlése kapcsolódó adatokat is eltávolít a fiókjából. Biztosan folytatja?
 email_deletion_success=Az e-mail címet töröltük!
 add_new_email=Új email cím felvétele
 add_email=Email felvétele
@@ -348,6 +351,7 @@ two_factor_or_enter_secret=Vagy adja meg a titkos kódot:
 two_factor_then_enter_passcode=Ezután írja be ezt a jelkódot:
 two_factor_verify=Ellenőrzés
 two_factor_invalid_passcode=Érvénytelen a megadott jelkód, próbálja meg újra!
+two_factor_reused_passcode=A megadott PIN-kód már használatban van. Kérem válasszon másikat!
 two_factor_enable_error=Kétlépcsős hitelesítés engedélyezése sikertelen: %v
 two_factor_enable_success=Kétlépcsős hitelesítés sikeresen engedélyezve a fiókjához!
 two_factor_recovery_codes_title=Kettőlépcsős hitelesítés helyreállítási kódok
@@ -401,11 +405,11 @@ fork_visiblity_helper=Nem módosíthatod egy fork-olt repository láthatóságá
 repo_desc=Leírás
 repo_lang=Nyelv
 repo_gitignore_helper=Válasszon .gitignore sablont
-license=Licensz
-license_helper=Licenszfájl kiválasztása
+license=Licenc
+license_helper=Licencfájl kiválasztása
 readme=Olvassel
 readme_helper=Válassz egy readme sablont
-auto_init=Repository megkezdése a kijelölt fájlokkal és sablonokkal
+auto_init=Tároló inicializálása a kiválasztott fájlokkal és sablonokkal
 create_repo=Tároló létrehozása
 default_branch=Alapértelmezett branch
 mirror_prune=Prune
@@ -417,27 +421,29 @@ mirror_last_synced=Utoljára szinkr.
 watchers=Figyelők
 stargazers=Csillagvizsgálók
 forks=Másolások
+repo_description_helper=Tároló leírása. Maximum 512 karakter hosszúságú.
+repo_description_length=Rendelkezésre álló karakterek
 
-form.reach_limit_of_creation=A tulajdonos túllépte a maximum létrehozható repository-k számát (%d).
+form.reach_limit_of_creation=A tulajdonos túllépte a maximum létrehozható tárolók számát (%d).
 form.name_reserved=Ez a tároló név ('%s') le van foglalva.
 form.name_pattern_not_allowed=Ez a tároló név ('%s') nem megengedett.
 
-need_auth=Engedély szükség
-migrate_type=Az áttelepítés-típust
+need_auth=Hitelesítés szükséges
+migrate_type=Migráció típusa
 migrate_type_helper=Ez a repository <span class="text blue">tükör</span>ként fog működni
-migrate_repo=Repository Költöztetése
+migrate_repo=Tároló migrálása
 migrate.clone_address=Klón cím
 migrate.clone_address_desc=Ez lehet egy HTTP/HTTPS/GIT URL.
 migrate.clone_address_desc_import_local=Migrálhat tárolót a helyi fájlrendszerből is az útvonal megadásával.
-migrate.permission_denied=Nem engedélyezett számodra a helyi repository-k importálása.
+migrate.permission_denied=Az Ön számára nem engedélyezett a helyi tároló importálása.
 migrate.invalid_local_path=Érvénytelen helyi elérési út; nem létezik vagy nem mappára mutat.
-migrate.failed=Költöztetés sikertelen: %s
+migrate.failed=Migráció sikertelen: %v
 
 mirror_from=tükrözi:
 forked_from=másolva
 copy_link=Másolás
 copy_link_success=Másolva!
-copy_link_error=Nyomd meg a ⌘-C vagy Ctrl-C gombokat a másoláshoz
+copy_link_error=Nyomja meg a ⌘-C vagy Ctrl-C gombokat a másoláshoz
 copied=Másolás rendben
 unwatch=Figyelés törlése
 watch=Figyelés
@@ -459,7 +465,7 @@ filter_branch_and_tag=Branch vagy tag szűrése
 branches=Branch-ok
 tags=Tag-ek
 issues=Problémák
-pulls=Pull request-ek
+pulls=Beolvasztási kérések
 labels=Címkék
 milestones=Mérföldkövek
 commits=Commit-ok
@@ -501,7 +507,7 @@ editor.update=Frissítés "%s"
 editor.delete=Törölje a "%s"
 editor.commit_message_desc=Opcionális hosszabb leírás hozzáadása...
 editor.commit_directly_to_this_branch=Commit egyenesen a(z) <strong class="branch-name">%s</strong> ágba.
-editor.create_new_branch=<strong>Új ág</strong> létrehozása ennek a commit-nak és egyesítési kérés indítása.
+editor.create_new_branch=<strong>Új ág</strong> létrehozása ennek a véglegesítésére és beolvasztási kérés indítása.
 editor.new_branch_name_desc=Új ág neve...
 editor.cancel=Mégse
 editor.filename_cannot_be_empty=A fájlnév nem lehet üres.
@@ -514,6 +520,7 @@ editor.file_changed_while_editing=A fájl tartalma megváltozott mióta elkezdte
 editor.file_already_exists=A(z) '%s' nevű fájl már létezik a tárolóban.
 editor.no_changes_to_show=Nincsen megjeleníthető változás.
 editor.fail_to_update_file=Nem sikerült frissíteni/létrehozni a következő fájlt: '%s' A hiba oka: %v
+editor.fail_to_delete_file=Nem sikerült törölni a következő fájlt: '%s' A hiba oka: %v
 editor.add_subdir=Alkönyvtár hozzáadása...
 editor.unable_to_upload_files=Nem sikerült feltölteni a fájlokat a "%s" hiba: %v
 editor.upload_files_to_dir=Fájlok feltöltése '%s'
@@ -608,7 +615,7 @@ issues.num_participants=%d Résztvevő
 issues.attachment.open_tab=`Megnyitás "%s" új fülön`
 issues.attachment.download=`Letöltéshez kattints "%s"`
 
-pulls.new=Új Pull Kérés
+pulls.new=Új beolvasztási kérés
 pulls.compare_changes=Összehasonlítás
 pulls.compare_changes_desc=Hasonlíts össze két branch-ot és készíts pull kérést a változtatásokkal.
 pulls.compare_base=base
@@ -616,6 +623,7 @@ pulls.compare_compare=összehasonlítás
 pulls.filter_branch=Branch szűrése
 pulls.no_results=Nincs találat.
 pulls.nothing_to_compare=Nincs mit összehasonlítani, mert a base és a head branch egyezik.
+pulls.nothing_merge_base=Nincs mit összehasonlítani, mert két ág teljes mértékben különböző előzményekkel rendelkezik.
 pulls.has_pull_request=`Már létezik egy pull kérés a két cél között: <a href="%[1]s/pulls/%[3]d">%[2]s#%[3]d</a>`
 pulls.create=Pull Kérés Létrehozása
 pulls.title_desc=szeretne %[1]d commit-ot egyesíteni innen: <code>%[2]s</code> ide: <code>%[3]s</code>
@@ -623,15 +631,18 @@ pulls.merged_title_desc=%[1]d commit egyesítve innen: <code>%[2]s</code> ide: <
 pulls.tab_conversation=Beszélgetés
 pulls.tab_commits=Commit-ok
 pulls.tab_files=Módosított fájlok
-pulls.reopen_to_merge=Kérlek, nyisd ki a pull kérést az egyesítéshez.
+pulls.reopen_to_merge=Kérjük, nyissa újra a beolvasztási kérést az egyesítés végrehajtásához.
 pulls.merged=Egyesítve
-pulls.has_merged=Ez a pull kérés sikeresen egyesítve lett!
+pulls.has_merged=Ez a beolvasztási kérés sikeresen egyesítve lett!
 pulls.data_broken=A pull kérés adatai sérültek a fork információ hiányossága miatt.
 pulls.is_checking=Az ütközés ellenőrzés még folyamatban van, frissítsd az oldalt pár másodperc múlva.
-pulls.can_auto_merge_desc=Ez a pull kérés automatikusán egyesíthető.
-pulls.cannot_auto_merge_desc=Ez a pull kérés ütközések miatt nem egyesíthető automatikusán.
+pulls.can_auto_merge_desc=Ez a beolvasztási kérés automatikusán egyesíthető.
+pulls.cannot_auto_merge_desc=Ez a beolvasztási kérés ütközések miatt nem egyesíthető automatikusan.
 pulls.cannot_auto_merge_helper=Kérlek, egyesítsd kézileg a konfliktusok megoldásához.
-pulls.merge_pull_request=Pull Kérés Egyesítése
+pulls.create_merge_commit=Eggyesítő commit létrehozása
+pulls.rebase_before_merging=Rebase eggyesítés előtt
+pulls.commit_description=Commit leírása
+pulls.merge_pull_request=Beolvasztási kérés egyesítése
 pulls.open_unmerged_pull_exists=`Nem tudja újranyitni, mert már van egy nyitott egyesítési kérés (#%d) ugyanebben a tárolóban, ugyanezekket az egyesítési információkkal, és végrehajtásra vár.`
 pulls.delete_branch=Ág törlése
 pulls.delete_branch_has_new_commits=Ág nem törölhető, mert tartalmaz olyan új változásokat melyek nem lettek még egyesítve.
@@ -663,7 +674,7 @@ milestones.deletion_success=A mérföldkő törlése megtörtént!
 wiki=Wiki
 wiki.welcome=Üdv a Wiki-ben!
 wiki.welcome_desc=A Wiki az a hely, ahol közösen dokumentálhatod és teheted jobbá a projekted a többiekkel.
-wiki.create_first_page=Hozd létre az első oldalt
+wiki.create_first_page=Első oldal létrehozása
 wiki.page=Oldal
 wiki.filter_page=Oldal szűrése
 wiki.new_page=Új Oldal Létrehozása
@@ -671,7 +682,7 @@ wiki.default_commit_message=Röviden foglald össze a módosításokat (nem köt
 wiki.save_page=Oldal Mentése
 wiki.last_commit_info=%s módosította ezt az oldalt ekkor: %s
 wiki.edit_page_button=Szerkeszt
-wiki.new_page_button=Új Oldal
+wiki.new_page_button=Új oldal
 wiki.delete_page_button=Oldal Törlése
 wiki.delete_page_notice_1=Ez ki fogja törölni a(z) <code>"%s"</code> oldalt. Jól gondold meg.
 wiki.page_already_exists=Már létezik ilyen nevű oldal a Wiki-n.
@@ -699,10 +710,10 @@ settings.branch_protection=Ág védeleme
 settings.branch_protection_desc=Válassza a védett ág opciót ehhez az ághoz: <b>%s</b>.
 settings.protect_this_branch=Ezen ág védelme
 settings.protect_this_branch_desc=Letiltja az ág törlését és a force pusht.
-settings.protect_require_pull_request=Eggyesítési kérést követel meg a direkt push helyett
-settings.protect_require_pull_request_desc=Ennek az opciónak a bekapcsolásával letiltható a direkt push az ágra. A commitokat egy másik, nem védett ágra kell küldeni, majd egyesítési kérést kell nyitni.
+settings.protect_require_pull_request=Beolvasztási kérést követel meg a direkt küldés helyett
+settings.protect_require_pull_request_desc=Ennek az opciónak a bekapcsolásával letiltható a közvetlen küldés az ágra. A véglegesítéseket egy másik, nem védett ágra kell küldeni, majd beolvasztási kérést kell nyitni.
 settings.protect_whitelist_committers=Fehérlista, hogy ki push-olhat az ágra
-settings.protect_whitelist_committers_desc=Felhasználók vagy csoportok hozzáadása az ág közvetlen push fehérlistájára. A fehérlistával ki lehet kerülni a kötelező egyesítési kérést.
+settings.protect_whitelist_committers_desc=Felhasználók vagy csoportok hozzáadása az ág közvetlen beküldési fehér listájára. A fehér listával ki lehet kerülni a kötelező beolvasztási kéréseket.
 settings.protect_whitelist_users=Felhasználók, akik push-olhatnak az ágra
 settings.protect_whitelist_search_users=Felhasználók keresése
 settings.protect_whitelist_teams=Csoportok, melyeknek tagjai pusholhatnak az ágra
@@ -714,10 +725,10 @@ settings.basic_settings=Alapbeállítások
 settings.mirror_settings=Beállítások tükrözése
 settings.sync_mirror=Szinkronizálás
 settings.mirror_sync_in_progress=A tükör szinkronozálása folyamatban van, egy perc múlva frissítse az oldalt.
-settings.site=Hivatalos Weboldal
-settings.update_settings=Beállítások Mentése
+settings.site=Hivatalos weboldal
+settings.update_settings=Beállítások mentése
 settings.change_reponame_prompt=Ez meg fogja változtatni a repository-ra mutató linkeket.
-settings.advanced_settings=Haladó Beállítások
+settings.advanced_settings=Haladó beállítások
 settings.wiki_desc=Engedélyezi a wiki rendszert
 settings.use_internal_wiki=Beépített Wiki használata
 settings.allow_public_wiki_desc=Publikus hozzáférés engedélyezése a Wikihez ha a tároló privát
@@ -735,7 +746,9 @@ settings.tracker_issue_style=Külső hibajegykezelő elnevezési stílus:
 settings.tracker_issue_style.numeric=Numerikus
 settings.tracker_issue_style.alphanumeric=Alfanumerikus
 settings.tracker_url_format_desc=Az alábbiak helyettesítik a felhasználónevet, repository nevet és hibajegy számot: <code>{user} {repo} {index}</code>.
-settings.pulls_desc=Nyilvános hozzájárulások (pull kérések) engedélyezése
+settings.pulls_desc=Beolvasztási kérések engedélyezése tárolók és ágak közi hozzájárulásokhoz
+settings.pulls.ignore_whitespace=Whitespacek figyelmen kívül hagyása
+settings.pulls.allow_rebase_merge=Rebase engedélyezése eggyesítő commitokhoz
 settings.danger_zone=Veszélyes terület
 settings.cannot_fork_to_same_owner=Nem másolható a tároló az eredeti tulajdonosához.
 settings.new_owner_has_same_repo=Az új tulaj már rendelkezik ilyen nevű repository-val. Kérlek, válassz másik nevet.
@@ -745,11 +758,11 @@ settings.convert_notices_1=- Ez a művelet átalakítja ezt a tükör repository
 settings.convert_confirm=Átalakítás Megerősítése
 settings.convert_succeed=A repository típusa sikeresen egyszerűre lett módosítva.
 settings.transfer=Tulajdonjog átadása
-settings.transfer_desc=Tároló átadása másik felhasználónak vagy szervezetnek, ahol rendszergazdai jogod van.
+settings.transfer_desc=Tároló átadása másik felhasználónak vagy szervezetnek, ahol rendszergazdai jogosultsága van.
 settings.transfer_notices_1=- Ha az új tulaj egy felhasználó, elvész a hozzáférésed.
 settings.transfer_notices_2=- A hozzáférésed megmarad ha az új tulaj egy szervezet melynek tulajdonosai közt szerepelsz.
 settings.transfer_form_title=Kérlek, add meg a követező információt a művelet megerősítéséhez:
-settings.wiki_delete=Wiki Adatok Törlése
+settings.wiki_delete=Wiki adatok törlése
 settings.wiki_delete_desc=Miután kitörölted a wiki adatokat nincs visszaút. Jól gondold meg.
 settings.wiki_delete_notices_1=- Ez törli és kikapcsolja a wiki-t itt: %s
 settings.wiki_deletion_success=A repository-hoz tartozó wiki adatok törlése sikeres.
@@ -814,10 +827,10 @@ settings.event_push=Push
 settings.event_push_desc=Push-olás egy repository-ba
 settings.event_issues=Problémák
 settings.event_issues_desc=A probléma meg left nyitva, le left zárva, újranyitva, szerkesztve, hozzárendelve, visszarendelve, cimkézve, cimketelenítve, mérföldkövezve, vagy mérföldkőtelenítve.
+settings.event_pull_request=Beolvasztási kérés
+settings.event_pull_request_desc=Beolvasztási kérés megnyitva, lezárva, újranyitva, hozzárendelve, visszarendelve, címkézve, címke eltávolítva, mérföldkövezve, mérföldkő eltávolítva vagy szinkronizálva.
 settings.event_issue_comment=Probléma hozzászólás
 settings.event_issue_comment_desc=Probléma megjegyzés létrehozva, szerkesztve vagy törölve.
-settings.event_pull_request=Pull kérések
-settings.event_pull_request_desc=Egyesítési kérés megnyitva, lezárva, újranyitva, hozzárendelve, visszarendelve, cimkézve, cimketelenítve, mérföldkövezve, mérföldkőtelenítve vagy szinkronizálva.
 settings.event_release=Kiadás
 settings.event_release_desc=Kiadás publikálva a tárolóban.
 settings.active=Aktív
@@ -830,6 +843,7 @@ settings.recent_deliveries=Legutóbbi Küldések
 settings.hook_type=Hook Típusa
 settings.add_slack_hook_desc=<a href="%s">Slack</a> integráció hozzáadása a repository-hoz.
 settings.add_discord_hook_desc=<a href="%s">Discord</a> integráció hozzáadva a térolóhoz.
+settings.add_dingtalk_hook_desc=<a href="%s">Dingtalk</a> integráció hozzáadása a tárolóhoz.
 settings.slack_token=Token
 settings.slack_domain=Domain
 settings.slack_channel=Csatorna
@@ -837,7 +851,7 @@ settings.deploy_keys=Deploy kulcsok
 settings.deploy_keys_helper=<b>Hasznos tipp!</b> ha saját személyes publikus kulcsait szeretné hozzáadni, azt a <a href="%s%s">fiók beállítások</a> oldalon teheti meg.
 settings.add_deploy_key=Deploy Kulcs Hozzáadása
 settings.deploy_key_desc=A deploy kulcsok csak olvasásra jogosítanak fel, nem azonosak a személyes SSH kulcsokkal.
-settings.no_deploy_keys=Még nem adtál hozzá deploy kulcsot.
+settings.no_deploy_keys=Még nem adott hozzá deploy kulcsot.
 settings.title=Név
 settings.deploy_key_content=Tartalom
 settings.key_been_used=Deploy kulcs tartalma már fel lett használva.
@@ -846,6 +860,8 @@ settings.add_key_success=Az új deploy kulcsot ('%s') sikeresen hozzáadtuk!
 settings.deploy_key_deletion=Deploy Kulcs Törlése
 settings.deploy_key_deletion_desc=A deploy kulcs törlése minden kapcsolódó hozzáférést töröl a repository-ból. Biztosan folytatod?
 settings.deploy_key_deletion_success=A deploy kulcs sikeresen törölve!
+settings.description_desc=Tároló leírása. Maximum 512 karakter hosszúságú.
+settings.description_length=Rendelkezésre álló karakterek
 
 diff.browse_source=Forráskód Böngészése
 diff.parent=szülő
@@ -900,8 +916,8 @@ repo_updated=Frissítve
 people=Emberek
 invite_someone=Meghívás
 teams=Csapatok
-lower_members=tagok
-lower_repositories=repository-k
+lower_members=tag
+lower_repositories=tároló
 create_new_team=Új csapat létrehozása
 org_desc=Leírás
 team_name=Csapat neve
@@ -956,9 +972,9 @@ teams.no_desc=Ennek a csapatnak nincs leírása
 teams.settings=Beállítások
 teams.owners_permission_desc=A tulajdonosoknak teljes hozzáférése van <strong>minden repository-hoz</strong> és <strong>adminisztrátori joguk</strong> van a szervezethez.
 teams.members=Csapattagok
-teams.update_settings=Beállítások Mentése
+teams.update_settings=Beállítások mentése
 teams.delete_team=Csapat Törlése
-teams.add_team_member=Csapattag Hozzáadása
+teams.add_team_member=Csapattag hozzáadása
 teams.delete_team_title=Csapat Törlése
 teams.delete_team_desc=Mivel a csapat törlésre kerül, a tagjai elveszíthetik a hozzáférésüket néhány repository-hoz. Folytatod?
 teams.delete_team_success=A csapat sikeresen törölve.
@@ -1081,11 +1097,12 @@ repos.stars=Csillagok
 repos.issues=Problémák
 repos.size=Méret
 
-auths.auth_manage_panel=Hitelesítés kezelő Panel
+auths.auth_sources=Hitelesítési források
 auths.new=Új forrás hozzáadása
 auths.name=Név
 auths.type=Típus
 auths.enabled=Engedélyezett
+auths.default=Alapértelmezett
 auths.updated=Frissítve
 auths.auth_type=Hitelesítés típusa
 auths.auth_name=Hitelesítési név
@@ -1094,6 +1111,7 @@ auths.domain=Tartomány
 auths.host=Állomás
 auths.port=Port
 auths.bind_dn=Bind DN
+auths.bind_dn_helper=Használhatja a '%s'-t felhasználónév helyett, pl.: DOM\%s
 auths.bind_password=Bind jelszó
 auths.bind_password_helper=Figyelmeztetés: Ez a jelszó egyszerű szöveges formátumban kerül metésre. Ne használjon egy magas szintű jogosultsággal rendelkező fiókot.
 auths.user_base=Felhasználókeresés alapja
@@ -1121,9 +1139,9 @@ auths.enable_tls=TLS titkosítás engedélyezése
 auths.skip_tls_verify=TLS ellenőrzése mellőzése
 auths.pam_service_name=PAM szolgáltatás neve
 auths.enable_auto_register=Automatikus regisztráció engedélyezése
-auths.tips=Tippek
 auths.edit=Hitelesítési beállítások szerkesztése
 auths.activated=Ez a hitelesítés mód aktiválva van
+auths.default_auth=Ez az alapértelmezett hitelesítési mód a bejelentkezéshez
 auths.new_success=Az új hitelesítési mód '%s' sikeresen hozzáadva.
 auths.update_success=A hitelesítési beállítások sikeresen firssítve lettek.
 auths.update=Hitelesítési forrás frissítése
@@ -1134,6 +1152,7 @@ auths.still_in_used=A hitelesítési mód még használatban van, mielőtt tör
 auths.deletion_success=Hitelesítési forrás sikeresen törölve!
 auths.login_source_exist=Bejelentkezési forrás "%s" már létezik.
 
+config.not_set=(nincs beállítva)
 config.server_config=Kiszolgáló konfiguráció
 config.app_name=Alkalmazás neve
 config.app_ver=Alkalmazás verziója
@@ -1155,6 +1174,7 @@ config.ssh_domain=Tartomány
 config.ssh_port=Port
 config.ssh_listen_port=Figyelő port
 config.ssh_root_path=Gyökér elérési útvonal
+config.ssh_rewrite_authorized_keys_at_start=SSH authorized_keys fájl újraírása indításnál
 config.ssh_key_test_path=Kulcs ellenőrzés útvonala
 config.ssh_keygen_path=Kulcsgeneráló ('ssh-keygen') elérési útja
 config.ssh_minimum_key_size_check=Minimális kulcsméret ellenőrzés
@@ -1170,6 +1190,9 @@ config.disable_http_git=A HTTP protokoll letiltása GIT-hez
 config.enable_local_path_migration=Engedélyezi a migrációt helyi elérési út alapján
 config.commits_fetch_concurrency=Konkurens lekérés
 
+config.http_config=HTTP beállítások
+config.http_access_control_allow_origin=Hozzáférés vezérlés forrás szerint
+
 config.db_config=Adatbázis konfiguráció
 config.db_type=Típus
 config.db_host=Állomás
@@ -1199,7 +1222,7 @@ config.skip_tls_verify=TLS ellenőrzése mellőzése
 config.mailer_config=Levelező beállítások
 config.mailer_enabled=Engedélyezett
 config.mailer_disable_helo=HELO letiltása
-config.mailer_name=Név
+config.mailer_subject_prefix=Tárgy előtag
 config.mailer_host=Állomás
 config.mailer_user=Felhasználó
 config.send_test_mail=Teszt E-mail küldése
@@ -1272,42 +1295,45 @@ notices.delete_success=A rendszer értesítések sikeresen törölve.
 
 [action]
 create_repo=létrehozott tárolót: <a href="%s"> %s</a>
-fork_repo=lemásolta a(z) <a href="%s">%s</a> tárolót
 rename_repo=átnevezte a <code>%[1]s</code> tárolót <a href="%[2]s">%[3]s</a>-ra
-commit_repo=feltöltött a <a href="%[1]s/src/%[2]s">%[3]s</a>-ba ekkor: <a href="%[1]s">%[4]s</a>
+commit_repo=feltöltött a <a href="%[1]s/src/%[2]s">%[3]s</a> ágba ide: <a href="%[1]s">%[4]s</a>
 compare_commits=%d commit összehasonlítása
 transfer_repo=áthelyezett egy tárolót innen: <code>%s</code> ide: <a href="%s">%s</a>
 create_issue=`problémát jelentett: <a href="%s/issues/%s">%s#%[2]s</a>`
 close_issue=`megoldott egy problémát: <a href="%s/issues/%s">%s#%[2]s</a>`
 reopen_issue=`újranyitott egy problémát: <a href="%s/issues/%s">%s#%[2]s</a>`
 comment_issue=`hozzászólt egy problémához: <a href="%s/issues/%s">%s#%[2]s</a>`
-create_pull_request=`létrehozott egy egyesítési kérést: <a href="%s/pulls/%s">%s#%[2]s</a>`
-close_pull_request=`lezárt egy egyesítési kérést: <a href="%s/pulls/%s">%s#%[2]s</a>`
-reopen_pull_request=`újranyitott egy egyesítési kérést: <a href="%s/pulls/%s">%s#%[2]s</a>`
-merge_pull_request=`végrehajtott egy egyesítési kérést: <a href="%s/pulls/%s">%s#%[2]s</a>`
-create_branch=létrehozott egy új ágat <a href="%[1]s/src/%[2]s">%[3]s</a> ekkor: <a href="%[1]s">%[4]s</a>
+create_pull_request=`létrehozott egy beolvasztási kérést: <a href="%s/pulls/%s">%s#%[2]s</a>`
+close_pull_request=`lezárt egy beolvasztási kérést: <a href="%s/pulls/%s">%s#%[2]s</a>`
+reopen_pull_request=`újranyitott egy beolvasztási kérést: <a href="%s/pulls/%s">%s#%[2]s</a>`
+merge_pull_request=`egyesített egy beolvasztási kérést: <a href="%s/pulls/%s">%s#%[2]s</a>`
+create_branch=létrehozott egy új <a href="%[1]s/src/%[2]s">%[3]s</a> ágat ebben: <a href="%[1]s">%[4]s</a>
 delete_branch=törölt egy ágat <code>%[2]s</code> ekkor: <a href="%[1]s">%[3]s</a>
 push_tag=feltöltött egy cimkét: <a href="%s/src/%s">%[2]s</a> ide: <a href="%[1]s">%[3]s</a>
 delete_tag=törölt egy cimkét <code>%[2]s</code> ekkor: <a href="%[1]s">%[3]s</a>
+fork_repo=lemásolta a(z) <a href="%s">%s</a> tárolót
+mirror_sync_push=synced commits to <a href="%[1]s/src/%[2]s">%[3]s</a> at <a href="%[1]s">%[4]s</a> from mirror
+mirror_sync_create=synced new reference <a href="%s/src/%s">%[2]s</a> to <a href="%[1]s">%[3]s</a> from mirror
+mirror_sync_delete=synced and deleted reference <code>%[2]s</code> at <a href="%[1]s">%[3]s</a> from mirror
 
 [tool]
-ago=óta
+ago= 
 from_now=mostantól
 now=most
-1s=1 másodperc %s
-1m=1 perc %s
-1h=1 óra %s
-1d=1 nap %s
-1w=1 hét %s
-1mon=1 hónap %s
-1y=1 év %s
-seconds=%d másodperc %s
-minutes=%d perc %s
-hours=%d óra %s
-days=%d nap %s
-weeks=%d hét %s
-months=%d hónap %s
-years=%d év %s
+1s=1 másodperce %s
+1m=1 perce %s
+1h=1 órája %s
+1d=1 napja %s
+1w=1 hete %s
+1mon=1 hónapja %s
+1y=1 éve %s
+seconds=%d másodperce %s
+minutes=%d perce %s
+hours=%d órája %s
+days=%d napja %s
+weeks=%d hete %s
+months=%d hónapja %s
+years=%d éve %s
 raw_seconds=másodperc
 raw_minutes=perc
 

conf/locale/locale_it-IT.ini

@@ -119,7 +119,7 @@ sqlite3_not_available=Questa versione non supporta SQLite3, si prega di scaricar
 invalid_db_setting=La configurazione del database non è corretta: %v
 invalid_repo_path=Percorso root del repository invalido: %v
 run_user_not_match=Run user non è l'utente corrente:  %s -> %s
-smtp_host_missing_port=SMTP Host is missing port in address.
+smtp_host_missing_port=All'Host SMTP manca la porta nell'indirizzo.
 invalid_smtp_from=Campo SMTP From non valido: %v
 save_config_failed=Fallito il salvataggio della configurazione: %v
 invalid_admin_setting=Impostazioni account Admin non valide: %v
@@ -151,6 +151,8 @@ register_hepler_msg=Hai già un account? Accedi ora!
 social_register_hepler_msg=Hai già un account? Associalo ora!
 disable_register_prompt=Siamo spiacenti, registrazione è stata disabilitata. Si prega di contattare l'amministratore del sito.
 disable_register_mail=Siamo spiacenti, la conferma di registrazione via Mail è stata disattivata.
+auth_source=Fonte di autenticazione
+local=Locale
 remember_me=Ricordami
 forgot_password=Password dimenticata
 forget_password=Password dimenticata?
@@ -169,13 +171,13 @@ reset_password_helper=Clicca qui per reimpostare la password
 password_too_short=La lunghezza della password non può essere meno 6 caratteri.
 non_local_account=Gli account non locali non possono modificare le password tramite Gogs.
 
-login_two_factor=Two-factor Authentication
-login_two_factor_passcode=Authentication Passcode
-login_two_factor_enter_recovery_code=Enter a two-factor recovery code
-login_two_factor_recovery=Two-factor Recovery
-login_two_factor_recovery_code=Recovery Code
-login_two_factor_enter_passcode=Enter a two-factor passcode
-login_two_factor_invalid_recovery_code=Recovery code has been used or does not valid.
+login_two_factor=Autenticazione in Due Passaggi
+login_two_factor_passcode=Codice di autenticazione
+login_two_factor_enter_recovery_code=Inserisci il codice di recupero dell'Autenticazione a due Fattori
+login_two_factor_recovery=Recupero a due fattori
+login_two_factor_recovery_code=Recupera il codice
+login_two_factor_enter_passcode=Inserisci un codice di accesso a due fattori
+login_two_factor_invalid_recovery_code=Il codice di recupero è stato utilizzato o non è valido.
 
 [mail]
 activate_account=Per favore attiva il tuo account
@@ -212,7 +214,7 @@ Content=Contenuto
 require_error=` non può essere vuoto.`
 alpha_dash_error=` ammessi solo caratteri alfanumerici o trattini(-_).`
 alpha_dash_dot_error=` ammessi solo caratteri alfanumerici o trattini(-_) o punti.`
-alpha_dash_dot_slash_error=` must be valid alpha or numeric or dash(-_) or dot characters or slashes.`
+alpha_dash_dot_slash_error=` ammessi solo caratteri alfanumerici o trattini(-_) o punti o slash.`
 size_error='deve essere %s.'
 min_size_error=` deve contenere almeno %s caratteri.`
 max_size_error=` deve contenere massimo %s caratteri.`
@@ -229,6 +231,7 @@ org_name_been_taken=Il nome dell'Organizzazione è già utlizzato.
 team_name_been_taken=Il nome del Team è già utilizzato.
 email_been_used=L'indirizzo E-mail è già utilizzato.
 username_password_incorrect=Nome utente o password incorretti.
+auth_source_mismatch=La sorgente di autenticazione selezionata non è associata all'utente.
 enterred_invalid_repo_name=Si prega di assicurarsi che il nome del repository inserito sia corretto.
 enterred_invalid_owner_name=Si prega di assicurarsi che il nome del proprietario inserito sia corretto.
 enterred_invalid_password=Verificare che la  password inserita sia corretta.
@@ -264,8 +267,8 @@ profile=Profilo
 password=Password
 avatar=Avatar
 ssh_keys=Chiavi SSH
-security=Security
-repos=Repositories
+security=Sicurezza
+repos=Repository
 orgs=Organizzazioni
 applications=Applicazioni
 delete=Elimina account
@@ -334,30 +337,31 @@ no_activity=Nessuna attività recente
 key_state_desc=Hai utilizzato questa chiave negli ultimi 7 giorni
 token_state_desc=Questo token e' satato utilizzato negli ultimi 7 giorni
 
-two_factor=Two-factor Authentication
-two_factor_status=Status:
-two_factor_on=On
-two_factor_off=Off
-two_factor_enable=Enable
-two_factor_disable=Disable
-two_factor_view_recovery_codes=View and save <a href="%s%s">your recovery codes</a> in a safe place. You can use them as passcode if you lose access to your authentication application.
-two_factor_http=For HTTP/HTTPS operations, you are no longer able to use plain username and password. Please create and use <a href="%[1]s%[2]s">Personal Access Token</a> as your credential, e.g. <code>%[3]s</code>.
-two_factor_enable_title=Enable Two-factor Authentication
-two_factor_scan_qr=Please use your authentication application to scan the image:
-two_factor_or_enter_secret=Or enter the secret:
-two_factor_then_enter_passcode=Then enter passcode:
-two_factor_verify=Verify
-two_factor_invalid_passcode=The passcode you entered is not valid, please try again!
-two_factor_enable_error=Enable Two-factor authentication failed: %v
-two_factor_enable_success=Two-factor authentication has enabled for your account successfully!
-two_factor_recovery_codes_title=Two-factor Authentication Recovery Codes
-two_factor_recovery_codes_desc=Recovery codes are used when you temporarily lose access to your authentication application. Each recovery code can only be used once, <b>please keep these codes in a safe place</b>.
-two_factor_regenerate_recovery_codes=Regenerate Recovery Codes
-two_factor_regenerate_recovery_codes_error=Regenerate recovery codes failed: %v
-two_factor_regenerate_recovery_codes_success=New recovery codes has been generated successfully!
-two_factor_disable_title=Disable Two-factor Authentication
-two_factor_disable_desc=Your account security level will decrease after disabled two-factor authentication. Do you want to continue?
-two_factor_disable_success=Two-factor authentication has disabled successfully!
+two_factor=Autenticazione in Due Passaggi
+two_factor_status=Stato:
+two_factor_on=Attiva
+two_factor_off=Non attivo
+two_factor_enable=Abilita
+two_factor_disable=Disattivata
+two_factor_view_recovery_codes=Visualizza e memorizza i tuoi <a href="%s%s">codici di recupero</a> in un posto sicuro. Puoi utilizzarli come codice di sicurezza se perdi gli accessi all'applicazione di autenticazione.
+two_factor_http=Per le operazioni HTTP/HTTPS, non sei più in grado di utilizzare nome utente e password. Si prega di creare e utilizzare <a href="%[1]s%[2]s">Token di accesso personale</a> come credenziali, ad esempio. <code>%[3]s</code>.
+two_factor_enable_title=Abilita l'autenticazione in due passaggi
+two_factor_scan_qr=Per favore, utilizza la tua applicazione di autenticazione per scansionare l'immagine:
+two_factor_or_enter_secret=O inserisci la chiave segreta:
+two_factor_then_enter_passcode=Poi inserisci la chiave di sicurezza:
+two_factor_verify=Verifica
+two_factor_invalid_passcode=La chiave di sicurezza che hai inserito non è valida, riprova!
+two_factor_reused_passcode=La chiave di sicurezza che hai inserito è già stata utilizzata, provane un'altra!
+two_factor_enable_error=Impossibile abilitare l'autenticazione a due fattori: %v
+two_factor_enable_success=Autenticazione a due fattori abilitata per il tuo account con successo!
+two_factor_recovery_codes_title=Codici di recupero autenticazione a due fattori
+two_factor_recovery_codes_desc=I codici di recupero vengono utilizzati quando si perde temporaneamente l'accesso all'applicazione di autenticazione. Ogni codice di recupero può essere utilizzato solo una volta, <b>si prega di mantenere questi codici in un posto sicuro</b>.
+two_factor_regenerate_recovery_codes=Rigenera codici di recupero
+two_factor_regenerate_recovery_codes_error=Impossibile rigenerare codici di recupero: %v
+two_factor_regenerate_recovery_codes_success=I nuovi codici di recupero sono stati generati correttamente!
+two_factor_disable_title=Disabilita autenticazione a due fattori
+two_factor_disable_desc=Il livello di sicurezza del tuo account diminuirà disabilitando l'autenticazione a due fattori. Vuoi continuare?
+two_factor_disable_success=L'autenticazione a due fattori è stata disabilitata!
 
 manage_access_token=Gestisci i Token di Accesso Personale
 generate_new_token=Genera Nuovo Token
@@ -375,10 +379,10 @@ orgs.none=Non sei membro di alcuna organizzazione.
 orgs.leave_title=Abbandona una organizzazione
 orgs.leave_desc=Abbandonando l'organizzazione perderai l'accesso a tutti i repository e i gruppi. Confermi?
 
-repos.leave=Leave
-repos.leave_title=Leave repository
-repos.leave_desc=You will lose access to the repository after you left. Do you want to continue?
-repos.leave_success=You have left repository '%s' successfully!
+repos.leave=Abbandona
+repos.leave_title=Lascia il repository
+repos.leave_desc=Perderai l'accesso al repository dopo che hai lasciato. Vuoi continuare?
+repos.leave_success=Hai lasciato il repository '%s' con successo!
 
 delete_account=Elimina Account
 delete_prompt=L'operazione eliminerà permanentemente l'account e <strong>NON POTRÀ</strong> essere annullata!
@@ -417,6 +421,8 @@ mirror_last_synced=Ultimo aggiornamento
 watchers=Osservatori
 stargazers=Fan
 forks=Fork
+repo_description_helper=Description of repository. Maximum 512 characters length.
+repo_description_length=Caratteri disponibili
 
 form.reach_limit_of_creation=Il proprietario ha raggiunto il limite massimo di %d repository creati.
 form.name_reserved=Il nome repository %s è riservato.
@@ -463,7 +469,7 @@ pulls=Pull Requests
 labels=Etichette
 milestones=Traguardi
 commits=Commit
-git_branches=Branches
+git_branches=Rami (Branch)
 releases=Rilasci
 file_raw=Originale
 file_history=Cronologia
@@ -472,12 +478,12 @@ file_permalink=Permalink
 file_too_large=Questo file è troppo grande per essere mostrato
 video_not_supported_in_browser=Il tuo browser non supporta i tag "video" di HTML5.
 
-branches.overview=Overview
-branches.active_branches=Active Branches
+branches.overview=Panoramica
+branches.active_branches=Rami (Branch) attivi
 branches.stale_branches=Stale Branches
-branches.all=All Branches
+branches.all=Tutti i rami (branch)
 branches.updated_by=Updated %[1]s by %[2]s
-branches.change_default_branch=Change Default Branch
+branches.change_default_branch=Cambia branch di default
 
 editor.new_file=Nuovo file
 editor.upload_file=Carica File
@@ -514,6 +520,7 @@ editor.file_changed_while_editing=Il file è stato cambiato in un'altra posizion
 editor.file_already_exists=Un file di nome '%s' esiste già in questo repository.
 editor.no_changes_to_show=Nessuna modifica da mostrare.
 editor.fail_to_update_file=La creazione o la modifica del file '%s' è fallita: %v
+editor.fail_to_delete_file=Failed to delete file '%s' with error: %v
 editor.add_subdir=Aggiungi sottocartella...
 editor.unable_to_upload_files=È fallito il caricamento dei file su '%s': %v
 editor.upload_files_to_dir=Carica file su '%s'
@@ -576,8 +583,8 @@ issues.next=Pagina successiva
 issues.open_title=Aperto
 issues.closed_title=Chiuso
 issues.num_comments=%d commenti
-issues.commented_at=`commented <a href="#%s">%s</a>`
-issues.delete_comment_confirm=Are you sure you want to delete this comment?
+issues.commented_at=`ha commentato <a href="#%s">%s</a>`
+issues.delete_comment_confirm=Sei sicuro/a di voler eliminare questo commento?
 issues.no_content=Non ci sono ancora contenuti.
 issues.close_issue=Chiudi
 issues.close_comment_issue=Commenta e chiudi
@@ -605,8 +612,8 @@ issues.label_deletion=Elimina Etichetta
 issues.label_deletion_desc=Eliminare l'etichetta rimuovera le sue informazioni in tutti i problemi correlati. Vuoi continuare?
 issues.label_deletion_success=Etichetta eliminata con successo!
 issues.num_participants=%d Partecipanti
-issues.attachment.open_tab=`Click to see "%s" in a new tab`
-issues.attachment.download=`Click to download "%s"`
+issues.attachment.open_tab='Clicca per vedere "%s" in una nuova scheda'
+issues.attachment.download=«Clicca qui per scaricare "%s"»
 
 pulls.new=Nuova Pull Request
 pulls.compare_changes=Confronta le modifiche
@@ -616,6 +623,7 @@ pulls.compare_compare=confronta
 pulls.filter_branch=Filtra branch
 pulls.no_results=Nessun risultato trovato.
 pulls.nothing_to_compare=Non c'è niente da confrontare perchè i branch base e head uguali.
+pulls.nothing_merge_base=There is nothing to compare because two branches have completely different history.
 pulls.has_pull_request=`E' già presente una pull request tra questi due trargets: <a href="%[1]s/pulls/%[3]d">%[2]s#%[3]d</a>`
 pulls.create=Crea Pull Request
 pulls.title_desc=vorrebbe unire %[1]d commit da <code>%[2]s</code> a <code>%[3]s</code>
@@ -628,12 +636,15 @@ pulls.merged=Unito
 pulls.has_merged=Questo contributo è stato incluso con successo!
 pulls.data_broken=I dati di questa pull request si sono rotti causa dell'eliminazione delle informazioni di fork.
 pulls.is_checking=Il controllo dei conflitti è ancora in corso, per favore aggiorna pagina tra qualche istante.
-pulls.can_auto_merge_desc=La pull request non può essere mergiata automaticamente.
+pulls.can_auto_merge_desc=La pull request può essere mergiata automaticamente.
 pulls.cannot_auto_merge_desc=Questa pull request non può essere mergiata automaticamente perchè ci sono dei conflitti.
 pulls.cannot_auto_merge_helper=Effettua il merge manualmente per risolvere i conflitti.
+pulls.create_merge_commit=Create a merge commit
+pulls.rebase_before_merging=Effettua un Rebase prima del Merge
+pulls.commit_description=Descrizione del Commit
 pulls.merge_pull_request=Unisci Pull Request
 pulls.open_unmerged_pull_exists=`You can't perform reopen operation because there is already an open pull request (#%d) from same repository with same merge information and is waiting for merging.`
-pulls.delete_branch=Delete Branch
+pulls.delete_branch=Elimina Ramo
 pulls.delete_branch_has_new_commits=Branch cannot be deleted because it has new commits after mergence.
 
 milestones.new=Nuova Milestone
@@ -681,61 +692,63 @@ wiki.last_updated=Ultimo aggiornamento: %s
 settings=Impostazioni
 settings.options=Opzioni
 settings.collaboration=Collaborazione
-settings.collaboration.admin=Admin
-settings.collaboration.write=Write
-settings.collaboration.read=Read
-settings.collaboration.undefined=Undefined
-settings.branches=Branches
+settings.collaboration.admin=Amministratore
+settings.collaboration.write=Scrivi
+settings.collaboration.read=Leggi
+settings.collaboration.undefined=Indefinito
+settings.branches=Divisioni
 settings.branches_bare=You cannot manage branches for bare repository. Please push some content first.
-settings.default_branch=Default Branch
+settings.default_branch=Ramo di default
 settings.default_branch_desc=The default branch is considered the "base" branch for code commits, pull requests and online editing.
-settings.update=Update
+settings.update=Aggiorna
 settings.update_default_branch_unsupported=Change default branch is not supported by the Git version on server.
 settings.update_default_branch_success=Default branch of this repository has been updated successfully!
-settings.protected_branches=Protected Branches
+settings.protected_branches=Branch protetti
 settings.protected_branches_desc=Protect branches from force pushing, accidental deletion and whitelist code committers.
-settings.choose_a_branch=Choose a branch...
-settings.branch_protection=Branch Protection
+settings.choose_a_branch=Scegli un ramo...
+settings.branch_protection=Protezione Ramo
 settings.branch_protection_desc=Please choose protect options for branch <b>%s</b>.
-settings.protect_this_branch=Protect this branch
+settings.protect_this_branch=Proteggere questo ramo
 settings.protect_this_branch_desc=Disable force pushes and prevent from deletion.
 settings.protect_require_pull_request=Require pull request instead direct pushing
 settings.protect_require_pull_request_desc=Enable this option to disable direct pushing to this branch. Commits have to be pushed to another non-protected branch and merged to this branch through pull request.
 settings.protect_whitelist_committers=Whitelist who can push to this branch
 settings.protect_whitelist_committers_desc=Add people or teams to whitelist of direct push to this branch. Users in whitelist will bypass require pull request check.
 settings.protect_whitelist_users=Users who can push to this branch
-settings.protect_whitelist_search_users=Search users
+settings.protect_whitelist_search_users=Cerca utenti
 settings.protect_whitelist_teams=Teams for which members of them can push to this branch
-settings.protect_whitelist_search_teams=Search teams
+settings.protect_whitelist_search_teams=Cerca Teams
 settings.update_protect_branch_success=Protect options for this branch has been updated successfully!
 settings.hooks=Webhooks
 settings.githooks=Git Hooks
 settings.basic_settings=Impostazioni di Base
-settings.mirror_settings=Mirror Settings
-settings.sync_mirror=Sync Now
-settings.mirror_sync_in_progress=Mirror syncing is in progress, please refresh page in about a minute.
+settings.mirror_settings=Impostazioni mirror
+settings.sync_mirror=Sincronizza ora
+settings.mirror_sync_in_progress=Sincronizzazione del mirror in corso, aggiorna la pagina tra un minuto.
 settings.site=Sito Ufficiale
 settings.update_settings=Aggiorna Impostazioni
 settings.change_reponame_prompt=Questa modifica influirà i link al repository.
 settings.advanced_settings=Opzioni avanzate
-settings.wiki_desc=Enable wiki system
-settings.use_internal_wiki=Use builtin wiki
+settings.wiki_desc=Abilita wiki
+settings.use_internal_wiki=Usa wiki incorporato
 settings.allow_public_wiki_desc=Allow public access to wiki when repository is private
 settings.use_external_wiki=Usa Wiki esterno
 settings.external_wiki_url=URL Wiki esterno
 settings.external_wiki_url_desc=I visitatori verranno reindirizzati all'URL quando cliccano sulla scheda.
-settings.issues_desc=Enable issue tracker
-settings.use_internal_issue_tracker=Use builtin lightweight issue tracker
+settings.issues_desc=Abilita tracking problemi
+settings.use_internal_issue_tracker=Utilizza il segnalatore di problemi integrato (molto leggero)
 settings.allow_public_issues_desc=Allow public access to issues when repository is private
 settings.use_external_issue_tracker=Utilizza gestore di problemi esterno
-settings.external_tracker_url=External Issue Tracker URL
-settings.external_tracker_url_desc=Visitors will be redirected to URL when they click on the tab.
+settings.external_tracker_url=URL di un segnalatore di problemi esterno
+settings.external_tracker_url_desc=I visitatori verranno reindirizzati all'URL quando faranno click sulla scheda.
 settings.tracker_url_format=Formato URL Gestore Problemi Esterno
 settings.tracker_issue_style=External Issue Tracker Naming Style:
-settings.tracker_issue_style.numeric=Numeric
-settings.tracker_issue_style.alphanumeric=Alphanumeric
+settings.tracker_issue_style.numeric=Numerico
+settings.tracker_issue_style.alphanumeric=Alfanumerico
 settings.tracker_url_format_desc=You can use placeholder <code>{user} {repo} {index}</code> for user name, repository name and issue index.
-settings.pulls_desc=Abilita le pull requests per accettare contributi pubblici
+settings.pulls_desc=Enable pull requests to accept contributions between repositories and branches
+settings.pulls.ignore_whitespace=Ignora cambiamenti di spazi bianchi
+settings.pulls.allow_rebase_merge=Allow use rebase to merge commits
 settings.danger_zone=Zona Pericolosa
 settings.cannot_fork_to_same_owner=You cannot fork a repository to its original owner.
 settings.new_owner_has_same_repo=Il nuovo proprietario ha già un repository con lo stesso nome. Per favore scegli un altro nome.
@@ -756,7 +769,7 @@ settings.wiki_deletion_success=I dati della wiki del repository sono stati elimi
 settings.delete=Elimina questo repository
 settings.delete_desc=Una volta che hai cancellato il repository, non puoi tornare indietro. Si prega di fare attenzione.
 settings.delete_notices_1=-Questa operazione <strong>NON PUÒ</strong> essere annullata.
-settings.delete_notices_2=-Questa operazione eliminerà definitivamente il tutto il contenuto del repository, inclusi i dati di Git, incidenti, commenti e accessi dei collaboratori.
+settings.delete_notices_2=- This operation will permanently delete everything in this repository, including Git data, issues, comments and collaborator access.
 settings.delete_notices_fork_1=- All forks will become independent after deletion.
 settings.deletion_success=Il repository è stato eliminato con successo!
 settings.update_settings_success=Le opzioni repository sono state aggiornate con successo.
@@ -806,19 +819,19 @@ settings.event_send_everything=Ho bisogno di <strong>tutto</strong>.
 settings.event_choose=Lasciami scegliere ciò di cui ho bisogno.
 settings.event_create=Crea
 settings.event_create_desc=Branch, o tag creato
-settings.event_delete=Delete
-settings.event_delete_desc=Branch or tag deleted
-settings.event_fork=Fork
-settings.event_fork_desc=Repository forked
+settings.event_delete=Elimina
+settings.event_delete_desc=Branch o tag eliminato
+settings.event_fork=Forka
+settings.event_fork_desc=Repository Forkata
 settings.event_push=Push
 settings.event_push_desc=Git push in un repository
-settings.event_issues=Issues
+settings.event_issues=Problemi
 settings.event_issues_desc=Issue opened, closed, reopened, edited, assigned, unassigned, label updated, label cleared, milestoned, or demilestoned.
-settings.event_issue_comment=Issue Comment
-settings.event_issue_comment_desc=Issue comment created, edited, or deleted.
 settings.event_pull_request=Pull request
 settings.event_pull_request_desc=Pull request opened, closed, reopened, edited, assigned, unassigned, label updated, label cleared, milestoned, demilestoned, or synchronized.
-settings.event_release=Release
+settings.event_issue_comment=Issue Comment
+settings.event_issue_comment_desc=Issue comment created, edited, or deleted.
+settings.event_release=Versione
 settings.event_release_desc=Release published in a repository.
 settings.active=Attivo
 settings.active_helper=Anche i dettagli riguardanti l'evento che ha innescato l'hook saranno inviati.
@@ -830,6 +843,7 @@ settings.recent_deliveries=Recenti Deliveries
 settings.hook_type=Tipo di Hook
 settings.add_slack_hook_desc=Aggiungi <a href="%s"> Slack</a> integrazione al tuo repository.
 settings.add_discord_hook_desc=Add <a href="%s">Discord</a> integration to your repository.
+settings.add_dingtalk_hook_desc=Add <a href="%s">Dingtalk</a> integration to your repository.
 settings.slack_token=Token
 settings.slack_domain=Dominio
 settings.slack_channel=Canale
@@ -846,6 +860,8 @@ settings.add_key_success=La nuova deploy key '%s' è stata aggiunta con successo
 settings.deploy_key_deletion=Elimina Deploy Key
 settings.deploy_key_deletion_desc=Cancellando questa deploy key verrà rismosso ogni accesso relativo a questa repository. Vuoi continuare?
 settings.deploy_key_deletion_success=Deploy key eliminata con successo!
+settings.description_desc=Description of repository. Maximum 512 characters length.
+settings.description_length=Available characters
 
 diff.browse_source=Sfoglia il codice sorgente
 diff.parent=parent
@@ -883,12 +899,12 @@ release.cancel=Annulla
 release.publish=Pubblica Rilascio
 release.save_draft=Salva Bozza
 release.edit_release=Modifica Rilascio
-release.delete_release=Cancela questa Release
+release.delete_release=Cancella questa Release
 release.deletion=Eliminazione Release
 release.deletion_desc=Eliminando questa release cancellarai anche i tag Git corrispondenti. Vuoi continuare?
 release.deletion_success=La release è stata eliminata con successo!
 release.tag_name_already_exist=Un rilascio con questo tag esiste già.
-release.tag_name_invalid=Tag name is not valid.
+release.tag_name_invalid=Il nome del Tag non è valido.
 release.downloads=Download
 
 [org]
@@ -912,7 +928,7 @@ team_permission_desc=Quale livello di autorizzazione dovrebbe avere questa squad
 
 form.name_reserved=Il nome organizzazione '%s' è riservato.
 form.name_pattern_not_allowed=La struttura del nome dell'organizzazione '%s' non è consentita.
-form.team_name_reserved=Team name '%s' is reserved.
+form.team_name_reserved=Non puoi utilizzare '%s' come nome del Team.
 
 settings=Impostazioni
 settings.options=Opzioni
@@ -1079,13 +1095,14 @@ repos.private=Privati
 repos.watches=Segue
 repos.stars=Voti
 repos.issues=Problemi
-repos.size=Size
+repos.size=Dimensione
 
-auths.auth_manage_panel=Pannello di configurazione dei meccanismi di autenticazione
+auths.auth_sources=Authentication Sources
 auths.new=Aggiungi Nuova Origine
 auths.name=Nome
 auths.type=Tipo
 auths.enabled=Attivo
+auths.default=Default
 auths.updated=Aggiornato
 auths.auth_type=Tipo di autenticazione
 auths.auth_name=Nome di autenticazione
@@ -1094,6 +1111,7 @@ auths.domain=Dominio
 auths.host=Host
 auths.port=Porta
 auths.bind_dn=Binda DN
+auths.bind_dn_helper=You can use '%s' as placeholder for username, e.g. DOM\%s
 auths.bind_password=Binda Password
 auths.bind_password_helper=Attenzione: Questa password è salvata in chiaro. Non usare su un acount con alti privilegi.
 auths.user_base=User Search Base
@@ -1103,7 +1121,7 @@ auths.attribute_username_placeholder=Se vuoto, verrà usato il nome di login del
 auths.attribute_name=First Name Attribute
 auths.attribute_surname=Attributo Cognome
 auths.attribute_mail=Attributo Email
-auths.verify_group_membership=Verify group membership
+auths.verify_group_membership=Verifica gruppo di appartenenza
 auths.group_search_base_dn=Group Search Base DN
 auths.group_filter=Group Filter
 auths.group_attribute_contain_user_list=Group Attribute Containing List of Users
@@ -1121,9 +1139,9 @@ auths.enable_tls=Abilitare Crittografia TLS
 auths.skip_tls_verify=Salta verifica TLS
 auths.pam_service_name=Nome del Servizio PAM
 auths.enable_auto_register=Abilitare Registrazione Automatica
-auths.tips=Consigli
 auths.edit=Modifica impostazioni di autenticazione
 auths.activated=Questa Autenticazione è stata attivata
+auths.default_auth=This authentication is default login source
 auths.new_success=Nuovo meccanismo di autenticazione '%s' aggiunto.
 auths.update_success=Parametro di autenticazione aggiornato.
 auths.update=Aggiornare le impostazioni di autenticazione
@@ -1134,6 +1152,7 @@ auths.still_in_used=Questo meccanismo di autenticazione è ancora attivo per alc
 auths.deletion_success=Il meccanismo di autenticazione è stato eliminato!
 auths.login_source_exist=La fonte di autenticazione '%s' esiste già.
 
+config.not_set=(non impostata)
 config.server_config=Configurazione Server
 config.app_name=Nome Applicazione
 config.app_ver=Versione Applicazione
@@ -1155,21 +1174,25 @@ config.ssh_domain=Dominio
 config.ssh_port=Porta
 config.ssh_listen_port=Porta in ascolto
 config.ssh_root_path=Percorso Root
+config.ssh_rewrite_authorized_keys_at_start=Rewrite authorized_keys At Start
 config.ssh_key_test_path=Percorso chiave di test
 config.ssh_keygen_path=Percorso Keygen ('ssh-keygen')
 config.ssh_minimum_key_size_check=Verifica delle dimensioni minime della chiave
 config.ssh_minimum_key_sizes=Dimensioni minime della chiave
 
-config.repo_config=Repository Configuration
+config.repo_config=Configurazione Repository
 config.repo_root_path=Percorso Root del Repository
 config.script_type=Tipo di Script
 config.repo_force_private=Force Private
 config.max_creation_limit=Max Creation Limit
 config.preferred_licenses=Preferred Licenses
-config.disable_http_git=Disable HTTP Git
-config.enable_local_path_migration=Enable Local Path Migration
+config.disable_http_git=Disabilita Git in HTTP
+config.enable_local_path_migration=Abilita migrazioni con path locale
 config.commits_fetch_concurrency=Commits Fetch Concurrency
 
+config.http_config=Configurazione HTTP
+config.http_access_control_allow_origin=Access Control Allow Origin
+
 config.db_config=Configurazione Database
 config.db_type=Tipo
 config.db_host=Host
@@ -1199,7 +1222,7 @@ config.skip_tls_verify=Salta verifiche TLS
 config.mailer_config=Configurazione Mailer
 config.mailer_enabled=Attivo
 config.mailer_disable_helo=Disattiva HELO
-config.mailer_name=Nome
+config.mailer_subject_prefix=Subject Prefix
 config.mailer_host=Host
 config.mailer_user=Utente
 config.send_test_mail=Invia email di test
@@ -1242,8 +1265,8 @@ config.git_pull_timeout=Timeout per il pull
 config.git_gc_timeout=Timeout per le operazioni di GC
 
 config.log_config=Configurazione Log
-config.log_mode=Mode
-config.log_options=Options
+config.log_mode=Modalità
+config.log_options=Opzioni
 
 monitor.cron=Incarici di cron
 monitor.name=Nome
@@ -1272,7 +1295,6 @@ notices.delete_success=Gli avvisi di sistema sono stati successivamente eliminat
 
 [action]
 create_repo=ha creato il repository <a href="%s">%s</a>
-fork_repo=forked a repository to <a href="%s">%s</a>
 rename_repo=repository rinominato da <code>%[1]s</code> a <a href="%[2]s">[3]s</a>
 commit_repo=ha pushato nel <a href="%[1]s/src/%[2]s">%[3]s</a> in <a href="%[1]s">%[4]s</a>
 compare_commits=Visualizza comparazione tra questi %d commit
@@ -1289,6 +1311,10 @@ create_branch=created new branch <a href="%[1]s/src/%[2]s">%[3]s</a> at <a href=
 delete_branch=deleted branch <code>%[2]s</code> at <a href="%[1]s">%[3]s</a>
 push_tag=ha pushato il tag <a href="%s/src/%s">%[2]s</a> a <a href="%[1]s">%[3]s</a>
 delete_tag=deleted tag <code>%[2]s</code> at <a href="%[1]s">%[3]s</a>
+fork_repo=forked a repository to <a href="%s">%s</a>
+mirror_sync_push=synced commits to <a href="%[1]s/src/%[2]s">%[3]s</a> at <a href="%[1]s">%[4]s</a> from mirror
+mirror_sync_create=synced new reference <a href="%s/src/%s">%[2]s</a> to <a href="%[1]s">%[3]s</a> from mirror
+mirror_sync_delete=synced and deleted reference <code>%[2]s</code> at <a href="%[1]s">%[3]s</a> from mirror
 
 [tool]
 ago=fa

conf/locale/locale_ko-KR.ini

@@ -119,7 +119,7 @@ sqlite3_not_available=설치하신 버전은 SQLite3을 지원하지 않으므
 invalid_db_setting=데이터베이스 설정이 올바르지 않습니다: %v
 invalid_repo_path=저장소 루트 경로가 올바르지 않습니다: %v
 run_user_not_match=실행 유저가 현재 유저가 아닙니다: %s -> %s
-smtp_host_missing_port=SMTP Host is missing port in address.
+smtp_host_missing_port=SMTP 호스트 포트가 주소에 없습니다.
 invalid_smtp_from=SMTP 보낸 사람 필드가 유효하지 않습니다: %v
 save_config_failed=설정을 저장할 수 없습니다: %v
 invalid_admin_setting=관리자 계정 설정이 잘못되었습니다: %v
@@ -151,6 +151,8 @@ register_hepler_msg=이미 계정을 가지고 계신가요? 로그인하세요!
 social_register_hepler_msg=계정을 가지고 계신가요? 연결하세요!
 disable_register_prompt=죄송합니다, 가입이 비활성화 되어있습니다. 사이트 관리자에게 문의 해주세요.
 disable_register_mail=죄송합니다. 메일 등록이 비활성화 되었습니다.
+auth_source=인증 소스 편집
+local=로컬
 remember_me=자동 로그인
 forgot_password=비밀번호 찾기
 forget_password=비밀번호를 잊으셨습니까?
@@ -229,6 +231,7 @@ org_name_been_taken=이미 사용중인 조직 이름입니다.
 team_name_been_taken=이미 사용중인 팀 이름입니다.
 email_been_used=이미 사용중인 이메일 주소입니다.
 username_password_incorrect=사용자 이름이나 비밀번호가 올바르지 않습니다.
+auth_source_mismatch=선택 인증 소스는 사용자와 연결 됩니다.
 enterred_invalid_repo_name=입력한 저장소 이름이 올바른지 확인하십시오.
 enterred_invalid_owner_name=입력한 사용자 이름이 올바른지 확인하십시오.
 enterred_invalid_password=입력한 비밀번호가 올바른지 확인하십시오.
@@ -340,24 +343,25 @@ two_factor_on=켜기
 two_factor_off=끄기
 two_factor_enable=활성화
 two_factor_disable=비활성화
-two_factor_view_recovery_codes=View and save <a href="%s%s">your recovery codes</a> in a safe place. You can use them as passcode if you lose access to your authentication application.
-two_factor_http=For HTTP/HTTPS operations, you are no longer able to use plain username and password. Please create and use <a href="%[1]s%[2]s">Personal Access Token</a> as your credential, e.g. <code>%[3]s</code>.
-two_factor_enable_title=Enable Two-factor Authentication
-two_factor_scan_qr=Please use your authentication application to scan the image:
-two_factor_or_enter_secret=Or enter the secret:
-two_factor_then_enter_passcode=Then enter passcode:
-two_factor_verify=Verify
-two_factor_invalid_passcode=The passcode you entered is not valid, please try again!
-two_factor_enable_error=Enable Two-factor authentication failed: %v
-two_factor_enable_success=Two-factor authentication has enabled for your account successfully!
-two_factor_recovery_codes_title=Two-factor Authentication Recovery Codes
-two_factor_recovery_codes_desc=Recovery codes are used when you temporarily lose access to your authentication application. Each recovery code can only be used once, <b>please keep these codes in a safe place</b>.
-two_factor_regenerate_recovery_codes=Regenerate Recovery Codes
-two_factor_regenerate_recovery_codes_error=Regenerate recovery codes failed: %v
-two_factor_regenerate_recovery_codes_success=New recovery codes has been generated successfully!
-two_factor_disable_title=Disable Two-factor Authentication
-two_factor_disable_desc=Your account security level will decrease after disabled two-factor authentication. Do you want to continue?
-two_factor_disable_success=Two-factor authentication has disabled successfully!
+two_factor_view_recovery_codes=<a href="%s%s">복구 코드</a>를 안전한 장소에 저장해 두십시오. 인증 애플리케이션에 접근할 수 없을때 사용할 수 있습니다.
+two_factor_http=HTTP/HTTPS 작업에 더이상 평문 사용자명과 비밀번호를 사용할 수 없습니다. <a href="%[1]s%[2]s">개인 액세스 토큰</a>을 생성후 사용해 주세요. 예. <code>%[3]s</code>.
+two_factor_enable_title=2단계 인증 활성화
+two_factor_scan_qr=인증 애플리케이션으로 이 이미지를 스캔하세요:
+two_factor_or_enter_secret=또는 이 비밀키를 입력하세요:
+two_factor_then_enter_passcode=그리고 코드를 입력하세요:
+two_factor_verify=확인
+two_factor_invalid_passcode=입력한 코드가 올바르지 않습니다. 다시 시도해 주세요!
+two_factor_reused_passcode=The passcode you entered has already been used, please try another one!
+two_factor_enable_error=2단계 인증 활성화 실패: %v
+two_factor_enable_success=2단계 인증이 성공적으로 활성화되었습니다!
+two_factor_recovery_codes_title=2단계 인증 복구 코드
+two_factor_recovery_codes_desc=복구 코드는 당신이 2단계 인증 프로그램에 접근할 수 없을때 사용합니다. 각 코드들은 한 번만 사용될 수 있습니다. <b>이 코드들은 안전한 장소에 보관하세요.</b>
+two_factor_regenerate_recovery_codes=복구 코드 재생성
+two_factor_regenerate_recovery_codes_error=복구 코드 재생성 실패: %v
+two_factor_regenerate_recovery_codes_success=성공적으로 새로운 복구 코드가 생성되었습니다!
+two_factor_disable_title=2단계 인증 비활성화
+two_factor_disable_desc=2단계 인증을 끄면 보안 수준이 낮아집니다. 계속하시겠습니까?
+two_factor_disable_success=2단계 인증이 성공적으로 비활성화되었습니다!
 
 manage_access_token=개인 액세스 토큰 관리
 generate_new_token=새 토큰을 생성
@@ -375,8 +379,8 @@ orgs.none=당신은 어떤 조직의 구성원도 아닙니다.
 orgs.leave_title=조직 떠나기
 orgs.leave_desc=조직을 떠난 후에는 모든 리포지토리와 팀에 액세스 할 수 없게 됩니다. 계속 하시겠습니까?
 
-repos.leave=Leave
-repos.leave_title=Leave repository
+repos.leave=나가기
+repos.leave_title=저장소 나가기
 repos.leave_desc=You will lose access to the repository after you left. Do you want to continue?
 repos.leave_success=You have left repository '%s' successfully!
 
@@ -417,6 +421,8 @@ mirror_last_synced=마지막으로 동기화됨
 watchers=주시하고 있는 사람들
 stargazers=별을 준 사람들
 forks=포크
+repo_description_helper=Description of repository. Maximum 512 characters length.
+repo_description_length=Available characters
 
 form.reach_limit_of_creation=소유자가 저장소 만들기 최대 제한에 (%d개) 도달했습니다.
 form.name_reserved=저장소 이름 '%s'은 예약 되어 있습니다.
@@ -450,7 +456,7 @@ quick_guide=퀵 가이드
 clone_this_repo=이 저장소 복제
 create_new_repo_command=커맨드 라인에서 새 저장소 만들기
 push_exist_repo=커맨드 라인에서 기존 저장소 푸시하기
-bare_message=This repository does not have any content yet.
+bare_message=이 저장소에는 아직 내용이 없습니다.
 
 files=파일
 branch=브렌치
@@ -463,7 +469,7 @@ pulls=풀 리퀘스트
 labels=레이블
 milestones=마일스톤
 commits=커밋
-git_branches=Branches
+git_branches=브랜치
 releases=릴리즈
 file_raw=Raw
 file_history=히스토리
@@ -472,12 +478,12 @@ file_permalink=고유링크
 file_too_large=이 파일은 표시하기엔 너무 큽니다.
 video_not_supported_in_browser=이 브라우저는 HTML5 비디오 태그를 지원하지 않습니다.
 
-branches.overview=Overview
-branches.active_branches=Active Branches
-branches.stale_branches=Stale Branches
-branches.all=All Branches
+branches.overview=개요
+branches.active_branches=활성 브랜치
+branches.stale_branches=오래된 브랜치
+branches.all=모든 브랜치
 branches.updated_by=Updated %[1]s by %[2]s
-branches.change_default_branch=Change Default Branch
+branches.change_default_branch=기본 브랜치 변경
 
 editor.new_file=파일 생성
 editor.upload_file=파일 업로드
@@ -514,6 +520,7 @@ editor.file_changed_while_editing=편집을 시작한 이후 파일 내용이
 editor.file_already_exists=이 저장소에 이름이 '%s'인 파일이 이미 존재합니다.
 editor.no_changes_to_show=표시할 변경사항이 없습니다.
 editor.fail_to_update_file=파일 '%s'를 변경/추가 하는데 실패하였습니다. 에러: %v
+editor.fail_to_delete_file=Failed to delete file '%s' with error: %v
 editor.add_subdir=하위 디렉토리 추가...
 editor.unable_to_upload_files=파일 '%s'를 업로드하는데 실패하였습니다. 에러: %v
 editor.upload_files_to_dir=파일 업로드 '%s'
@@ -616,6 +623,7 @@ pulls.compare_compare=비교
 pulls.filter_branch=Filter Branch
 pulls.no_results=결과 없음
 pulls.nothing_to_compare=Base 와 head 브랜치가 동일해서 비교할 게 없습니다.
+pulls.nothing_merge_base=There is nothing to compare because two branches have completely different history.
 pulls.has_pull_request=`이 두 타겟 사이엔 이미 풀 리퀘스트가 있습니다:<a href="%[1]s/pulls/%[3]d">%[2]s#%[3]d</a>`
 pulls.create=풀 리퀘스트 생성
 pulls.title_desc=<code>%[2]s</code> 에서 <code>%[3]s</code> 로 %[1]d commits 를 머지하려 합니다
@@ -632,6 +640,9 @@ pulls.is_checking=아직 컨플릭트 여부 체크 중입니다, 잠시 후 이
 pulls.can_auto_merge_desc=이 풀리퀘스트는 자동적으로 머지될 수 있습니다.
 pulls.cannot_auto_merge_desc=컨플릭이 존재해서 이 풀리퀘스트는 자동을 머지될 수 없습니다.
 pulls.cannot_auto_merge_helper=컨플릭을 해결하려면 수동으로 머지해 주십시오.
+pulls.create_merge_commit=Create a merge commit
+pulls.rebase_before_merging=병합 하기 전에 리베이스
+pulls.commit_description=Commit Description
 pulls.merge_pull_request=풀리퀘스트 머지
 pulls.open_unmerged_pull_exists=`같은 리파지토리에서 같은 머지 정보로 만들어진 풀리퀘스트 (#%d) 가 이미 오픈 상태이고 머지를 기다리고 있기 때문에 다시 열기 작업을 할 수 없습니다.`
 pulls.delete_branch=브랜치 삭제
@@ -736,9 +747,11 @@ settings.tracker_issue_style=외부 이슈 트래커 명명 스타일:
 settings.tracker_issue_style.numeric=숫자
 settings.tracker_issue_style.alphanumeric=문자 숫자
 settings.tracker_url_format_desc=<code>{user} {repo} {index}</code> 사용자 명, 저장소 명, 이슈 인덱스를 사용하여 표시자를 사용할 수 있습니다.
-settings.pulls_desc=끌어오기 요청을 공개적으로 기여받을 수 있도록 활성화합니다.
+settings.pulls_desc=Enable pull requests to accept contributions between repositories and branches
+settings.pulls.ignore_whitespace=Ignore changes in whitespace
+settings.pulls.allow_rebase_merge=Allow use rebase to merge commits
 settings.danger_zone=위험 설정
-settings.cannot_fork_to_same_owner=You cannot fork a repository to its original owner.
+settings.cannot_fork_to_same_owner=본인 소유의 저장소를 본인 명의로 포크할 수 없습니다.
 settings.new_owner_has_same_repo=새로운 소유자가 같은 이름의 저장소를 이미 가지고 있습니다. 다른 이름을 선택해주세요.
 settings.convert=일반 리파지토리로 변환
 settings.convert_desc=이 미러를 일반 리파지토리로 변환할 수 없습니다. 반대로는 할 수 없습니다.
@@ -757,7 +770,7 @@ settings.wiki_deletion_success=저장소의 Wiki 데이터가 성공적으로
 settings.delete=이 저장소 삭제
 settings.delete_desc=저장소를 지우고 나면 되돌릴 수 없습니다. 다시 한번 확인하세요.
 settings.delete_notices_1=- 이 작업은 취소할 수 <strong>없습니다.</strong>
-settings.delete_notices_2=- 이 작업은 저장소의 모든 항목을 영구적으로 삭제합니다. Git 데이터, 이슈, 주석 및 공동 작업자의 액세스를 포함합니다.
+settings.delete_notices_2=- This operation will permanently delete everything in this repository, including Git data, issues, comments and collaborator access.
 settings.delete_notices_fork_1=- 모든 포크들은 삭제 후에도 독립적으로 유지됩니다.
 settings.deletion_success=저장소가 성공적으로 삭제 되었습니다!
 settings.update_settings_success=저장소 옵션이 성공적으로 업데이트 되었습니다.
@@ -807,18 +820,18 @@ settings.event_send_everything=<strong>모든 것</strong>이 필요합니다.
 settings.event_choose=필요한 것을 선택해주세요.
 settings.event_create=생성
 settings.event_create_desc=브랜치 또는 태그를 생성합니다.
-settings.event_delete=Delete
-settings.event_delete_desc=Branch or tag deleted
-settings.event_fork=Fork
+settings.event_delete=삭제
+settings.event_delete_desc=브랜치나 태그 삭제됨
+settings.event_fork=포크
 settings.event_fork_desc=Repository forked
 settings.event_push=푸시
 settings.event_push_desc=깃 저장소로 푸시
-settings.event_issues=Issues
+settings.event_issues=이슈
 settings.event_issues_desc=Issue opened, closed, reopened, edited, assigned, unassigned, label updated, label cleared, milestoned, or demilestoned.
-settings.event_issue_comment=Issue Comment
-settings.event_issue_comment_desc=Issue comment created, edited, or deleted.
 settings.event_pull_request=끌어오기 요청
 settings.event_pull_request_desc=Pull request opened, closed, reopened, edited, assigned, unassigned, label updated, label cleared, milestoned, demilestoned, or synchronized.
+settings.event_issue_comment=Issue Comment
+settings.event_issue_comment_desc=Issue comment created, edited, or deleted.
 settings.event_release=Release
 settings.event_release_desc=Release published in a repository.
 settings.active=활성
@@ -831,6 +844,7 @@ settings.recent_deliveries=최근의 Deliveries
 settings.hook_type=훅 타입
 settings.add_slack_hook_desc=저장소에 <a href="%s">슬랙</a>연동을 추가
 settings.add_discord_hook_desc=Add <a href="%s">Discord</a> integration to your repository.
+settings.add_dingtalk_hook_desc=Add <a href="%s">Dingtalk</a> integration to your repository.
 settings.slack_token=토큰
 settings.slack_domain=도메인
 settings.slack_channel=채널
@@ -847,6 +861,8 @@ settings.add_key_success=새로운 배포 키 '%s'가 성공적으로 추가 되
 settings.deploy_key_deletion=배포 키 삭제
 settings.deploy_key_deletion_desc=이 배포키를 삭제하면 이 저장소와 관련된 모든 접근 권한이 삭제됩니다. 계속 하시겠습니까?
 settings.deploy_key_deletion_success=배포 키가 성공적으로 삭제되었습니다!
+settings.description_desc=Description of repository. Maximum 512 characters length.
+settings.description_length=Available characters
 
 diff.browse_source=소스 검색
 diff.parent=부모
@@ -1080,13 +1096,14 @@ repos.private=비공개
 repos.watches=지켜보기
 repos.stars=Stars
 repos.issues=이슈
-repos.size=Size
+repos.size=크기
 
-auths.auth_manage_panel=인증 관리 패널
+auths.auth_sources=Authentication Sources
 auths.new=새로운 소스를 추가
 auths.name=이름
 auths.type=유형
 auths.enabled=활성화됨
+auths.default=Default
 auths.updated=업데이트됨
 auths.auth_type=인증 유형
 auths.auth_name=인증 이름
@@ -1095,16 +1112,17 @@ auths.domain=도메인
 auths.host=호스트
 auths.port=포트
 auths.bind_dn=DN 연결
+auths.bind_dn_helper=You can use '%s' as placeholder for username, e.g. DOM\%s
 auths.bind_password=비밀번호 연결
 auths.bind_password_helper=경고: 이 암호는 일반 텍스트로 저장됩니다. 높은 권한의 계정을 사용하지 마십시오.
 auths.user_base=사용자 검색 기준
 auths.user_dn=사용자 DN
 auths.attribute_username=유저 명 속성
 auths.attribute_username_placeholder=사용자 이름에 대한 로그인 폼 필드 값을 사용하려면 비워 둡니다.
-auths.attribute_name=First Name Attribute
+auths.attribute_name=첫번째 이름 속성
 auths.attribute_surname=성씨 속성
 auths.attribute_mail=이메일 속성
-auths.verify_group_membership=Verify group membership
+auths.verify_group_membership=그룹 구성원 자격을 확인
 auths.group_search_base_dn=Group Search Base DN
 auths.group_filter=Group Filter
 auths.group_attribute_contain_user_list=Group Attribute Containing List of Users
@@ -1122,9 +1140,9 @@ auths.enable_tls=TLS 암호화 활성화
 auths.skip_tls_verify=TLS 검증 건너뛰기
 auths.pam_service_name=PAM 서비스 명
 auths.enable_auto_register=자동 등록을 활성화
-auths.tips=도움말
 auths.edit=인증 설정 편집
 auths.activated=이 인증정보는 활성화되어있습니다.
+auths.default_auth=This authentication is default login source
 auths.new_success=새로운 인증 '%s'가 성공적으로 추가 되었습니다.
 auths.update_success=인증 설정이 성공적으로 변경되었습니다.
 auths.update=인증 설정 업데이트
@@ -1135,6 +1153,7 @@ auths.still_in_used=이 인증은 아직 몇몇 사용자들이 사용하고 있
 auths.deletion_success=인증이 성공적으로 삭제 되었습니다!
 auths.login_source_exist=로그인 소스 '%s'는 이미 존재합니다.
 
+config.not_set=(not set)
 config.server_config=서버 설정
 config.app_name=애플리케이션 이름
 config.app_ver=응용 프로그램 버전
@@ -1156,6 +1175,7 @@ config.ssh_domain=도메인
 config.ssh_port=포트
 config.ssh_listen_port=수신 대기 포트
 config.ssh_root_path=최상위 경로
+config.ssh_rewrite_authorized_keys_at_start=Rewrite authorized_keys At Start
 config.ssh_key_test_path=주 테스트 경로
 config.ssh_keygen_path=키 생성 ('ssh-keygen') 경로
 config.ssh_minimum_key_size_check=최소 키 사이즈 검사
@@ -1171,6 +1191,9 @@ config.disable_http_git=Disable HTTP Git
 config.enable_local_path_migration=Enable Local Path Migration
 config.commits_fetch_concurrency=Commits Fetch Concurrency
 
+config.http_config=HTTP 설정
+config.http_access_control_allow_origin=Access Control Allow Origin
+
 config.db_config=데이터베이스 설정
 config.db_type=유형
 config.db_host=호스트
@@ -1200,7 +1223,7 @@ config.skip_tls_verify=TLS 확인 건너뛰기
 config.mailer_config=메일러 설정
 config.mailer_enabled=활성화됨
 config.mailer_disable_helo=HELO 비활성화
-config.mailer_name=이름
+config.mailer_subject_prefix=Subject Prefix
 config.mailer_host=호스트
 config.mailer_user=사용자
 config.send_test_mail=테스트 이메일 보내기
@@ -1273,7 +1296,6 @@ notices.delete_success=시스템 알림들이 성공적으로 삭제되었습니
 
 [action]
 create_repo=저장소를 만들었습니다. <a href="%s">%s</a>
-fork_repo=forked a repository to <a href="%s">%s</a>
 rename_repo=<code>%[1]s에서</code>에서 <a href="%[2]s"> %[3]s</a>으로 저장소 이름을 바꾸었습니다.
 commit_repo=<a href="%[1]s">%[4]s</a>에서 <a href="%[1]s/src/%[2]s">%[3]s</a>으로 푸시함
 compare_commits=이 %d개의 커밋에 대한 비교 보기
@@ -1290,6 +1312,10 @@ create_branch=created new branch <a href="%[1]s/src/%[2]s">%[3]s</a> at <a href=
 delete_branch=deleted branch <code>%[2]s</code> at <a href="%[1]s">%[3]s</a>
 push_tag=태그 <a href="%s/src/%s">%[2]s</a>를 <a href="%[1]s">%[3]s</a>로 푸시함
 delete_tag=deleted tag <code>%[2]s</code> at <a href="%[1]s">%[3]s</a>
+fork_repo=forked a repository to <a href="%s">%s</a>
+mirror_sync_push=synced commits to <a href="%[1]s/src/%[2]s">%[3]s</a> at <a href="%[1]s">%[4]s</a> from mirror
+mirror_sync_create=synced new reference <a href="%s/src/%s">%[2]s</a> to <a href="%[1]s">%[3]s</a> from mirror
+mirror_sync_delete=synced and deleted reference <code>%[2]s</code> at <a href="%[1]s">%[3]s</a> from mirror
 
 [tool]
 ago=전

conf/locale/locale_lv-LV.ini

@@ -119,7 +119,7 @@ sqlite3_not_available=Jūsu versija neatbalsta SQLite3, lūdzu lejupielādējiet
 invalid_db_setting=Datu bāzes iestatījums nav pareizs: %v
 invalid_repo_path=Repozitorija atrašanās vieta ir nekorekta: %v
 run_user_not_match=Izpildes lietotājs nav pašreizējais lietotājs: %s -> %s
-smtp_host_missing_port=SMTP Host is missing port in address.
+smtp_host_missing_port=SMTP adresē nav norādīts ports.
 invalid_smtp_from=SMTP sūtītāja lauks ir nekorekts: %v
 save_config_failed=Neizdevās saglabāt konfigurāciju: %v
 invalid_admin_setting=Nekorekts admin konta iestatījums: %v
@@ -151,6 +151,8 @@ register_hepler_msg=Jau ir konts? Pieraksties tagad!
 social_register_hepler_msg=Jau ir konts? Sasaisti tagad!
 disable_register_prompt=Atvainojiet, reģistrācija ir atspējota. Lūdzu, sazinieties ar vietnes administratoru.
 disable_register_mail=Atvainojiet, reģistrācijas e-pasta apstiprināšana ir atspējota.
+auth_source=Autentificēšanas avots
+local=Local
 remember_me=Atcerēties mani
 forgot_password=Aizmirsu paroli
 forget_password=Aizmirsi paroli?
@@ -212,7 +214,7 @@ Content=Saturs
 require_error=` nedrīkst būt tukšs.`
 alpha_dash_error=` drīkst saturēt tikai latīņu alfabēta burtus, ciparus vai domuzīmes (-_).`
 alpha_dash_dot_error=` drīkst saturēt tikai latīņu alfabēta burtus, ciparus, domuzīmes (-_) vai punktu.`
-alpha_dash_dot_slash_error=` must be valid alpha or numeric or dash(-_) or dot characters or slashes.`
+alpha_dash_dot_slash_error=` drīkst saturēt tikai latīņu alfabēta burtus, ciparus, domuzīmes (-_), slīpsvītru vai punktu.`
 size_error=` jābūt %s simbolus garam.`
 min_size_error=` jabūt vismaz %s simbolu garumā.`
 max_size_error=` jabūt ne mazāk kā %s simbolu garumā.`
@@ -229,6 +231,7 @@ org_name_been_taken=Organizācijas nosaukums ir jau aizņemts.
 team_name_been_taken=Komandas nosaukums ir jau aizņemts.
 email_been_used=E-pasta adrese jau tiek izmantota.
 username_password_incorrect=Lietotājvārds vai parole nav pareiza.
+auth_source_mismatch=Izvēlētais autentificēšanas avots nav saistīts ar lietotāju.
 enterred_invalid_repo_name=Lūdzu, pārliecinieties, vai ievadītā repozitorija nosaukums ir pareizs.
 enterred_invalid_owner_name=Lūdzu, pārliecinieties, vai ievadītā īpašnieka vārds ir pareizs.
 enterred_invalid_password=Lūdzu pārliecinieties, vai Jūsu ievadītā parole ir pareiza.
@@ -347,8 +350,9 @@ two_factor_scan_qr=Please use your authentication application to scan the image:
 two_factor_or_enter_secret=Vai ievadiet noslēpumu:
 two_factor_then_enter_passcode=Pēc tam ievadiet kodu:
 two_factor_verify=Pārbaudīt
-two_factor_invalid_passcode=The passcode you entered is not valid, please try again!
-two_factor_enable_error=Enable Two-factor authentication failed: %v
+two_factor_invalid_passcode=Ievadītais piekļuves kods nav derīgs. Lūdzu mēģiniet vēlreiz!
+two_factor_reused_passcode=Ievadītais piekļuves kods jau ir izmantots. Lūdzu mēģiniet citu!
+two_factor_enable_error=Divu faktoru autentifikācijas iespējošana neizdevās: %v
 two_factor_enable_success=Two-factor authentication has enabled for your account successfully!
 two_factor_recovery_codes_title=Two-factor Authentication Recovery Codes
 two_factor_recovery_codes_desc=Recovery codes are used when you temporarily lose access to your authentication application. Each recovery code can only be used once, <b>please keep these codes in a safe place</b>.
@@ -357,7 +361,7 @@ two_factor_regenerate_recovery_codes_error=Regenerate recovery codes failed: %v
 two_factor_regenerate_recovery_codes_success=New recovery codes has been generated successfully!
 two_factor_disable_title=Atspējot divu faktoru autentifikāciju
 two_factor_disable_desc=Your account security level will decrease after disabled two-factor authentication. Do you want to continue?
-two_factor_disable_success=Two-factor authentication has disabled successfully!
+two_factor_disable_success=Divu faktoru autentificēšana ir atspējota!
 
 manage_access_token=Pārvaldīt personīgos piekļuves talonus
 generate_new_token=Ģenerēt jaunu talonu
@@ -371,7 +375,7 @@ access_token_deletion=Personīgā piekļuves talona dzēšana
 access_token_deletion_desc=Dzēšot personīgo piekļuves talonu, tiks liegta piekļuve aplikācijām, kas to izmanto. Vai vēlaties turpināt?
 delete_token_success=Personīgās piekļuves talons veiksmīgi izdzēsts! Neaizmirstiet nomainīt uz citu aplikācijās, kas to izmantoja.
 
-orgs.none=You are not a member of any organizations.
+orgs.none=Jūs neesat nevienas organizācijas dalībnieks.
 orgs.leave_title=Pamest organizāciju
 orgs.leave_desc=You will lose access to all repositories and teams after you left the organization. Do you want to continue?
 
@@ -417,6 +421,8 @@ mirror_last_synced=Pēdējo reizi sinhronizēts
 watchers=Novērotāji
 stargazers=Zvaigžņdevēji
 forks=Atdalītie repozitoriji
+repo_description_helper=Repozitorija apraksts. Maksimālais garums 512 rakstzīmes.
+repo_description_length=Pieejamās rakstzīmes
 
 form.reach_limit_of_creation=Īpašnieks sasniedza maksimālu pieļaujamo (%d) izveidoto repozitoriju skaitu.
 form.name_reserved=Repozitorija nosaukums '%s' ir rezervēts.
@@ -470,13 +476,13 @@ file_history=Vēsture
 file_view_raw=Rādīt neapstrādātu
 file_permalink=Patstāvīgā saite
 file_too_large=Šis fails ir par lielu, lai to parādītu
-video_not_supported_in_browser=Your browser doesn't support HTML5 video tag.
+video_not_supported_in_browser=Jūsu pārlūks neatbalsta HTML5 video.
 
 branches.overview=Pārskats
 branches.active_branches=Aktīvie atzari
 branches.stale_branches=Pamests atzars
 branches.all=Visi atzari
-branches.updated_by=Updated %[1]s by %[2]s
+branches.updated_by=%[2]s atjaunoja %[1]s
 branches.change_default_branch=Mainīt noklusēto atzaru
 
 editor.new_file=Jauns fails
@@ -514,6 +520,7 @@ editor.file_changed_while_editing=Faila saturs ir mainījies kopš brīža, kad
 editor.file_already_exists=Fails ar nosaukumu '%s' repozitorijā jau eksistē.
 editor.no_changes_to_show=Nav izmaiņu, ko rādīt.
 editor.fail_to_update_file=Neizdevās izmainīt/izveidot failu '%s', kļūda: %v
+editor.fail_to_delete_file=Neizdevās dzēst failu '%s', kļūda: %v
 editor.add_subdir=Pievienot apakšdirektoriju...
 editor.unable_to_upload_files=Neizdevās augšupielādēt failus uz direktoriju '%s', kļūda: %v
 editor.upload_files_to_dir=Augšupielādēt failus uz direktoriju '%s'
@@ -616,6 +623,7 @@ pulls.compare_compare=salīdzināmais
 pulls.filter_branch=Filtrēt atzarus
 pulls.no_results=Nekas netika atrasts.
 pulls.nothing_to_compare=Nav ko salīdzināt, jo bāzes un salīdzināmie atzari ir vienādi.
+pulls.nothing_merge_base=There is nothing to compare because two branches have completely different history.
 pulls.has_pull_request=`Jau eksistē izmaiņu pieprasījums starp šiem diviem atzariem: <a href="%[1]s/pulls/%[3]d">%[2]s#%[3]d</a>`
 pulls.create=Izveidot izmaiņu pieprasījumu
 pulls.title_desc=vēlas sapludināt %[1]d revīzijas no <code>%[2]s</code> uz <code>%[3]s</code>
@@ -631,6 +639,9 @@ pulls.is_checking=Notiek konfliktu pārbaude, mirkli uzgaidiet un atjaunojiet la
 pulls.can_auto_merge_desc=Šo izmaiņu pieprasījumu var automātiski saplūdināt.
 pulls.cannot_auto_merge_desc=Šis izmaiņu pieprasījums nevar tikt automātiski saplūdināts konfliktu dēļ.
 pulls.cannot_auto_merge_helper=Lūdzu sapludiniet manuāli, lai atrisinātu konfliktus.
+pulls.create_merge_commit=Create a merge commit
+pulls.rebase_before_merging=Rebase before merging
+pulls.commit_description=Commit Description
 pulls.merge_pull_request=Izmaiņu pieprasījuma sapludināšana
 pulls.open_unmerged_pull_exists=`Jūs nevarat veikt atkārtotas atvēršanas darbību, jo jau eksistē izmaiņu pieprasījums (#%d) no šī repozitorija ar tādu pašu sapludināšanas informāciju un gaida sapludināšanu.`
 pulls.delete_branch=Dzēst atzaru
@@ -735,7 +746,9 @@ settings.tracker_issue_style=Ārējā problēmu reģistra nosaukumu stils:
 settings.tracker_issue_style.numeric=Cipari
 settings.tracker_issue_style.alphanumeric=Burti un cipari
 settings.tracker_url_format_desc=Jūs varat izmantot <code>{user}{repo}{index}</code> lietotājvārdam, repozitorija nosaukumam un problēmas identifikātoram.
-settings.pulls_desc=Iespējot izmaiņu pieprasījumus lai saņemtu publiskus ieguldījumus
+settings.pulls_desc=Enable pull requests to accept contributions between repositories and branches
+settings.pulls.ignore_whitespace=Ignorēt atstarpju izmaiņas
+settings.pulls.allow_rebase_merge=Allow use rebase to merge commits
 settings.danger_zone=Bīstamā zona
 settings.cannot_fork_to_same_owner=You cannot fork a repository to its original owner.
 settings.new_owner_has_same_repo=Jaunajam īpašniekam jau ir repozitorijs ar šādu nosaukumu.
@@ -814,10 +827,10 @@ settings.event_push=Izmaiņu nosūtīšana
 settings.event_push_desc=Git izmaiņu nosūtīšana uz repozitoriju
 settings.event_issues=Problēmas
 settings.event_issues_desc=Issue opened, closed, reopened, edited, assigned, unassigned, label updated, label cleared, milestoned, or demilestoned.
-settings.event_issue_comment=Problēmas komentārs
-settings.event_issue_comment_desc=Issue comment created, edited, or deleted.
 settings.event_pull_request=Izmaiņu pieprasījums
 settings.event_pull_request_desc=Pull request opened, closed, reopened, edited, assigned, unassigned, label updated, label cleared, milestoned, demilestoned, or synchronized.
+settings.event_issue_comment=Problēmas komentārs
+settings.event_issue_comment_desc=Issue comment created, edited, or deleted.
 settings.event_release=Laidiens
 settings.event_release_desc=Laidiens publicēts repozitorijā.
 settings.active=Aktīvs
@@ -830,6 +843,7 @@ settings.recent_deliveries=Pēdējās piegādes
 settings.hook_type=Āķa veids
 settings.add_slack_hook_desc=PIevienot <a href="%s">Slack</a> integrāciju Jūsu repozitorijā.
 settings.add_discord_hook_desc=Add <a href="%s">Discord</a> integration to your repository.
+settings.add_dingtalk_hook_desc=Add <a href="%s">Dingtalk</a> integration to your repository.
 settings.slack_token=Talons
 settings.slack_domain=Domēns
 settings.slack_channel=Kanāls
@@ -846,6 +860,8 @@ settings.add_key_success=Izvietošanas atslēga '%s' tik veiksmīgi pievienota!
 settings.deploy_key_deletion=Dzēst izvietošanas atslēgu
 settings.deploy_key_deletion_desc=Dzēšot šo izvietošanas atslēgu tiks noņemta arī ar to saistītā piekļuve šim repozitorijam. Vai vēlaties turpināt?
 settings.deploy_key_deletion_success=Izvietošanas atslēga tika veiksmīgi izdzēsta!
+settings.description_desc=Description of repository. Maximum 512 characters length.
+settings.description_length=Available characters
 
 diff.browse_source=Pārlūkot izejas kodu
 diff.parent=vecāks
@@ -1081,11 +1097,12 @@ repos.stars=Atzīmētās zvaigznītes
 repos.issues=Problēmas
 repos.size=Izmērs
 
-auths.auth_manage_panel=Autentifikācijas pārvaldības panelis
+auths.auth_sources=Authentication Sources
 auths.new=Pievienot jaunu avotu
 auths.name=Nosaukums
 auths.type=Veids
 auths.enabled=Iespējota
+auths.default=Default
 auths.updated=Atjaunināta
 auths.auth_type=Autentifikācijas tips
 auths.auth_name=Autentifikācijas nosaukums
@@ -1094,17 +1111,18 @@ auths.domain=Domēns
 auths.host=Resursdators
 auths.port=Ports
 auths.bind_dn=Saistīšanas DN
+auths.bind_dn_helper=You can use '%s' as placeholder for username, e.g. DOM\%s
 auths.bind_password=Saistīšanas parole
 auths.bind_password_helper=Brīdinājums: Šī parole tiks saglabāta nešifrētā veidā. Neizmantojiet kontu ar augstām privilēģijām.
 auths.user_base=Lietotāja pamatnosacījumi
 auths.user_dn=Lietotāja DN
 auths.attribute_username=Lietotājvārda atribūts
 auths.attribute_username_placeholder=Atstājiet tukšu, lai izmantotu lietotājvārdu ar kuru autorizējaties.
-auths.attribute_name=First Name Attribute
+auths.attribute_name=Vārda atribūts
 auths.attribute_surname=Uzvārda atribūts
 auths.attribute_mail=E-pasta atribūts
-auths.verify_group_membership=Verify group membership
-auths.group_search_base_dn=Group Search Base DN
+auths.verify_group_membership=Pārbaudīt grupas piederību
+auths.group_search_base_dn=Grupas meklēšanas pamata DN
 auths.group_filter=Group Filter
 auths.group_attribute_contain_user_list=Group Attribute Containing List of Users
 auths.user_attribute_listed_in_group=User Attribute Listed in Group
@@ -1121,9 +1139,9 @@ auths.enable_tls=Iespējot TLS šifrēšanu
 auths.skip_tls_verify=Izlaist TLS verifikāciju
 auths.pam_service_name=PAM servisa nosaukums
 auths.enable_auto_register=Iespējot automātisko reģistrāciju
-auths.tips=Padomi
 auths.edit=Labot autentifikācijas iestatījumus
 auths.activated=Autentifikācija ir aktivizēta
+auths.default_auth=This authentication is default login source
 auths.new_success=Jauna autentifikācija '%s' tika veiksmīgi pievienota.
 auths.update_success=Autentifikācijas iestatījumi tika veiksmīgi saglabāti.
 auths.update=Mainīt autentifikācijas iestatījumus
@@ -1134,6 +1152,7 @@ auths.still_in_used=Daži lietotāji joprojām izmanto šo autentifikācijas vei
 auths.deletion_success=Autentifikācija tika veiksmīgi izdzēsta!
 auths.login_source_exist=Pieteikšanās avots '%s' jau eksistē.
 
+config.not_set=(nav noteikts)
 config.server_config=Servera konfigurācija
 config.app_name=Lietotnes nosaukums
 config.app_ver=Lietotnes versija
@@ -1155,6 +1174,7 @@ config.ssh_domain=Domēns
 config.ssh_port=Ports
 config.ssh_listen_port=Klausīšanās ports
 config.ssh_root_path=Saknes ceļš
+config.ssh_rewrite_authorized_keys_at_start=Rewrite authorized_keys At Start
 config.ssh_key_test_path=Atslēgu pārbaudes ceļš
 config.ssh_keygen_path=Keygen ('ssh-keygen') ceļš
 config.ssh_minimum_key_size_check=Minimālā atslēgas lieluma pārbaude
@@ -1170,6 +1190,9 @@ config.disable_http_git=Atspējot HTTP Git
 config.enable_local_path_migration=Atļaut migrāciju no lokāla ceļa
 config.commits_fetch_concurrency=Commits Fetch Concurrency
 
+config.http_config=HTTP konfigurācija
+config.http_access_control_allow_origin=Access Control Allow Origin
+
 config.db_config=Datu bāzes konfigurācija
 config.db_type=Veids
 config.db_host=Resursdators
@@ -1199,7 +1222,7 @@ config.skip_tls_verify=Izlaist TLS pārbaudi
 config.mailer_config=Sūtītāja konfigurācija
 config.mailer_enabled=Iespējots
 config.mailer_disable_helo=Atspējot HELO
-config.mailer_name=Nosaukums
+config.mailer_subject_prefix=Subject Prefix
 config.mailer_host=Resursdators
 config.mailer_user=Lietotājs
 config.send_test_mail=Nosūtīt pārbaudes e-pastu
@@ -1272,7 +1295,6 @@ notices.delete_success=Sistēmas paziņojumi tika veiksmīgi izdzēstas.
 
 [action]
 create_repo=izveidoja repozitoriju <a href="%s">%s</a>
-fork_repo=atdalīja repozitoriju uz <a href="%s">%s</a>
 rename_repo=pārsauca repozitoriju no <code>%[1]s</code> uz <a href="%[2]s">%[3]s</a>
 commit_repo=veica izmaiņu nosūtīšanu atzaram <a href="%[1]s/src/%[2]s">%[3]s</a> repozitorijā <a href="%[1]s">%[4]s</a>
 compare_commits=Salīdzināt šīs %d revīzijas
@@ -1289,6 +1311,10 @@ create_branch=izveidoja jaunu atzaru <a href="%[1]s/src/%[2]s">%[3]s</a> repozit
 delete_branch=izdzēsa atzaru <code>%[2]s</code> repozitorijā <a href="%[1]s">%[3]s</a>
 push_tag=pievienoja tagu <a href="%s/src/%s">%[2]s</a> repozitorijam <a href="%[1]s">%[3]s</a>
 delete_tag=izdzēsa tagu <code>%[2]s</code> repozitorijā <a href="%[1]s">%[3]s</a>
+fork_repo=atdalīja repozitoriju uz <a href="%s">%s</a>
+mirror_sync_push=synced commits to <a href="%[1]s/src/%[2]s">%[3]s</a> at <a href="%[1]s">%[4]s</a> from mirror
+mirror_sync_create=synced new reference <a href="%s/src/%s">%[2]s</a> to <a href="%[1]s">%[3]s</a> from mirror
+mirror_sync_delete=synced and deleted reference <code>%[2]s</code> at <a href="%[1]s">%[3]s</a> from mirror
 
 [tool]
 ago=atpakaļ

conf/locale/locale_nl-NL.ini

@@ -40,7 +40,7 @@ your_settings=Uw instellingen
 
 activities=Activiteiten
 pull_requests=Pull requests
-issues=Kwesties
+issues=Issues
 
 cancel=Annuleren
 
@@ -119,7 +119,7 @@ sqlite3_not_available=Uw versie biedt geen ondersteuning voor SQLite3, download
 invalid_db_setting=Uw database instellingen zijn niet correct: %v
 invalid_repo_path=Repositorie basis map is niet correct: %v
 run_user_not_match=De uitvoerende gebruiker is niet de huidig gebruiker: %s -> %s
-smtp_host_missing_port=SMTP Host is missing port in address.
+smtp_host_missing_port=SMTP-Host mist een poort in het adres.
 invalid_smtp_from=SMTP-van-veld is niet geldig: %v
 save_config_failed=Kan de configuratie niet opslaan: %v
 invalid_admin_setting=Uw admin-instellingen zijn niet geldig: %v
@@ -151,6 +151,8 @@ register_hepler_msg=Heeft u al een account? Meld u nu aan!
 social_register_hepler_msg=Heeft u al een account? Koppel nu!
 disable_register_prompt=Sorry, registratie is uitgeschakeld. Neem contact op met de beheerder van deze site.
 disable_register_mail=Sorry, bevestiging van registratie per e-mail is uitgeschakeld.
+auth_source=Authentication Source
+local=Lokaal
 remember_me=Onthoud mij
 forgot_password=Wachtwoord vergeten
 forget_password=Wachtwoord vergeten?
@@ -171,10 +173,10 @@ non_local_account=Niet lokale accounts mogen hun wachtwoord niet veranderen via
 
 login_two_factor=Twee-traps authenticatie
 login_two_factor_passcode=Authenticatie wachtwoord
-login_two_factor_enter_recovery_code=Enter a two-factor recovery code
-login_two_factor_recovery=Two-factor Recovery
-login_two_factor_recovery_code=Recovery Code
-login_two_factor_enter_passcode=Enter a two-factor passcode
+login_two_factor_enter_recovery_code=Voer de two-factor herstelcode in
+login_two_factor_recovery=Two-factor herstel
+login_two_factor_recovery_code=Herstel code
+login_two_factor_enter_passcode=Voer een two-factor wachtwoord in
 login_two_factor_invalid_recovery_code=Recovery code has been used or does not valid.
 
 [mail]
@@ -205,7 +207,7 @@ AdminEmail=E-mail beheerder
 NewBranchName=Nieuwe branch naam
 CommitSummary=Commit samenvatting
 CommitMessage=Commit bericht
-CommitChoice=Commit choice
+CommitChoice=Keuze toepassen
 TreeName=Bestandspad
 Content=Inhoud
 
@@ -229,6 +231,7 @@ org_name_been_taken=Organisatie naam is al in gebruik.
 team_name_been_taken=Team naam is al in gebruik.
 email_been_used=e-mailadres is al in gebruik.
 username_password_incorrect=Gebruikersnaam of wachtwoord is niet correct.
+auth_source_mismatch=The authentication source selected is not associated with the user.
 enterred_invalid_repo_name=U heeft een onjuiste repositorie naam ingevoerd.
 enterred_invalid_owner_name=U heeft een onjuiste eigenaar ingevoerd.
 enterred_invalid_password=U heeft een onjuiste wachtwoord ingevoerd.
@@ -264,7 +267,7 @@ profile=Profiel
 password=Wachtwoord
 avatar=Profielfoto
 ssh_keys=SSH-sleutels
-security=Security
+security=Beveiliging
 repos=Repositories
 orgs=Organisaties
 applications=Toepassingen
@@ -336,18 +339,19 @@ token_state_desc=Deze token is de laatste 7 dagen gebruikt
 
 two_factor=Two-factor Authentication
 two_factor_status=Status:
-two_factor_on=On
-two_factor_off=Off
-two_factor_enable=Enable
-two_factor_disable=Disable
+two_factor_on=Aan
+two_factor_off=Uit
+two_factor_enable=Inschakelen
+two_factor_disable=Uitschakelen
 two_factor_view_recovery_codes=View and save <a href="%s%s">your recovery codes</a> in a safe place. You can use them as passcode if you lose access to your authentication application.
 two_factor_http=For HTTP/HTTPS operations, you are no longer able to use plain username and password. Please create and use <a href="%[1]s%[2]s">Personal Access Token</a> as your credential, e.g. <code>%[3]s</code>.
 two_factor_enable_title=Enable Two-factor Authentication
 two_factor_scan_qr=Please use your authentication application to scan the image:
 two_factor_or_enter_secret=Or enter the secret:
 two_factor_then_enter_passcode=Then enter passcode:
-two_factor_verify=Verify
+two_factor_verify=Verifiëren
 two_factor_invalid_passcode=The passcode you entered is not valid, please try again!
+two_factor_reused_passcode=The passcode you entered has already been used, please try another one!
 two_factor_enable_error=Enable Two-factor authentication failed: %v
 two_factor_enable_success=Two-factor authentication has enabled for your account successfully!
 two_factor_recovery_codes_title=Two-factor Authentication Recovery Codes
@@ -375,8 +379,8 @@ orgs.none=U bent geen lid van een organisatie.
 orgs.leave_title=Een organisatie verlaten
 orgs.leave_desc=U verliest toegang tot alle repositories en teams nadat u de organisatie verlaten hebt. Wilt u doorgaan?
 
-repos.leave=Leave
-repos.leave_title=Leave repository
+repos.leave=Verlaat
+repos.leave_title=Verlaat repository
 repos.leave_desc=You will lose access to the repository after you left. Do you want to continue?
 repos.leave_success=You have left repository '%s' successfully!
 
@@ -417,6 +421,8 @@ mirror_last_synced=Laatste synchronisatie
 watchers=Volgers
 stargazers=Stargazers
 forks=Forks
+repo_description_helper=Description of repository. Maximum 512 characters length.
+repo_description_length=Available characters
 
 form.reach_limit_of_creation=De eigenaar heeft maximale creatie limiet van %d repositories bereikt.
 form.name_reserved=Repositorienaam '%s' is gereserveerd.
@@ -450,7 +456,7 @@ quick_guide=Snelstart gids
 clone_this_repo=Kloon deze repositorie
 create_new_repo_command=Maak een nieuwe repositorie aan vanaf de console
 push_exist_repo=Push een bestaande repositorie vanaf de console
-bare_message=This repository does not have any content yet.
+bare_message=Deze repository bevat nog geen inhoud.
 
 files=Bestanden
 branch=Aftakking
@@ -458,7 +464,7 @@ tree=Boom
 filter_branch_and_tag=Filter branch of tag
 branches=Aftakkingen
 tags=Labels
-issues=Kwesties
+issues=Issues
 pulls=Pull-aanvragen
 labels=Labels
 milestones=Mijlpalen
@@ -472,7 +478,7 @@ file_permalink=Permalink
 file_too_large=Dit bestand is te groot om te worden getoond
 video_not_supported_in_browser=Uw browser ondersteunt geen HTML5 video label.
 
-branches.overview=Overview
+branches.overview=Overzicht
 branches.active_branches=Active Branches
 branches.stale_branches=Stale Branches
 branches.all=All Branches
@@ -488,18 +494,18 @@ editor.edit_this_file=Bestand aanpassen
 editor.must_be_on_a_branch=Je moet in een branch zijn om aanpassingen te maken of voor te stellen
 editor.fork_before_edit=Je moet deze repository eerst vorken om dit bestand aan te kunnen passen
 editor.delete_this_file=Verwijder dit bestand
-editor.must_have_write_access=You must have write access to make or propose changes to this file
+editor.must_have_write_access=U moet schrijftoegang hebben om aanpassingen te maken of voor te stellen in dit bestand
 editor.file_delete_success=Bestand '%s' is succesvol verwijderd!
 editor.name_your_file=Bestandsnaam...
-editor.filename_help=To add directory, just type it and press /. To remove a directory, go to the beginning of the field and press backspace.
+editor.filename_help=Om een map toe te voegen, begin met typen en druk op /. Om een map te verwijderen, ga naar het begin van het veld en druk op backspace.
 editor.or=of
 editor.cancel_lower=annuleren
-editor.commit_changes=Commit Changes
+editor.commit_changes=Wijzigingen toepassen
 editor.add_tmpl='%s/<filename>' toevoegen
 editor.add='%s' toevoegen
 editor.update='%s' updaten
 editor.delete='%s' verwijderen
-editor.commit_message_desc=Add an optional extended description...
+editor.commit_message_desc=Voeg een optionele beschrijving toe...
 editor.commit_directly_to_this_branch=Commit directly to the <strong class="branch-name">%s</strong> branch.
 editor.create_new_branch=Create a <strong>new branch</strong> for this commit and start a pull request.
 editor.new_branch_name_desc=Naam nieuwe aftakking...
@@ -509,11 +515,12 @@ editor.branch_already_exists=Aftakking '%s' bestaat al in deze repository.
 editor.directory_is_a_file=Entry '%s' in the parent path is a file not a directory in this repository.
 editor.file_is_a_symlink=The file '%s' is a symlink that cannot be modified from the web editor.
 editor.filename_is_a_directory=The filename '%s' is an existing directory in this repository.
-editor.file_editing_no_longer_exists=The file '%s' you are editing no longer exists in the repository.
+editor.file_editing_no_longer_exists=Het bestand '%s' die u aan het bewerken bent bestaat niet meer in deze repository.
 editor.file_changed_while_editing=File content has been changed since you started editing. <a target="_blank" href="%s">Click here</a> to see what have been changed or <strong>press commit again</strong> to overwrite those changes.
 editor.file_already_exists=A file with name '%s' already exists in this repository.
 editor.no_changes_to_show=Er zijn geen wijzigingen om weer te geven.
 editor.fail_to_update_file=Failed to update/create file '%s' with error: %v
+editor.fail_to_delete_file=Failed to delete file '%s' with error: %v
 editor.add_subdir=Submap toevoegen...
 editor.unable_to_upload_files=Failed to upload files to '%s' with error: %v
 editor.upload_files_to_dir=Bestanden uploaden naar '%s'
@@ -558,7 +565,7 @@ issues.filter_milestone_no_select=Geen geselecteerde mijlpaal
 issues.filter_assignee=Aangewezene
 issues.filter_assginee_no_select=Geen geselecteerde verantwoordelijke
 issues.filter_type=Type
-issues.filter_type.all_issues=Alle kwesties
+issues.filter_type.all_issues=Alle issues
 issues.filter_type.assigned_to_you=Aan jou toegewezen
 issues.filter_type.created_by_you=Aangemaakt door jou
 issues.filter_type.mentioning_you=Vermelden jou
@@ -616,6 +623,7 @@ pulls.compare_compare=vergelijk
 pulls.filter_branch=Filter branch
 pulls.no_results=Geen resultaten gevonden.
 pulls.nothing_to_compare=Er is niets te vergelijken omdat base en head branches dezelfde zijn.
+pulls.nothing_merge_base=There is nothing to compare because two branches have completely different history.
 pulls.has_pull_request=' Er is al een pull-aanvraag tussen deze twee targets: <a href="%[1]s/pulls/%[3]d"> %[2]s #% [3]d</a>'
 pulls.create=Pull verzoek aanmaken
 pulls.title_desc=wil %[1]d commits van <code>%[2]s</code> samenvoegen met <code>%[3]s</code>
@@ -631,6 +639,9 @@ pulls.is_checking=Controle van conflicten is nog bezig, ververs deze pagina in e
 pulls.can_auto_merge_desc=Dit pull-request kan automatisch samengevoegd worden.
 pulls.cannot_auto_merge_desc=Dit pull-request kan niet worden gemerged omdat er conflicten zijn.
 pulls.cannot_auto_merge_helper=Gelieve beide versies manueel samen te voegen om de conflicten op te lossen.
+pulls.create_merge_commit=Create a merge commit
+pulls.rebase_before_merging=Rebase before merging
+pulls.commit_description=Commit Description
 pulls.merge_pull_request=Samenvoegen van pull verzoek
 pulls.open_unmerged_pull_exists=U kan de bewerking 'heropenen' niet uitvoeren omdat er al een pull-aanvraag (#%d) is van dezelfde repository met dezelfde informatie. Voeg deze eerst samen. 
 pulls.delete_branch=Aftakking verwijderen
@@ -689,7 +700,7 @@ settings.branches=Branches
 settings.branches_bare=You cannot manage branches for bare repository. Please push some content first.
 settings.default_branch=Default Branch
 settings.default_branch_desc=The default branch is considered the "base" branch for code commits, pull requests and online editing.
-settings.update=Update
+settings.update=Bijwerken
 settings.update_default_branch_unsupported=Change default branch is not supported by the Git version on server.
 settings.update_default_branch_success=Default branch of this repository has been updated successfully!
 settings.protected_branches=Protected Branches
@@ -704,7 +715,7 @@ settings.protect_require_pull_request_desc=Enable this option to disable direct
 settings.protect_whitelist_committers=Whitelist who can push to this branch
 settings.protect_whitelist_committers_desc=Add people or teams to whitelist of direct push to this branch. Users in whitelist will bypass require pull request check.
 settings.protect_whitelist_users=Users who can push to this branch
-settings.protect_whitelist_search_users=Search users
+settings.protect_whitelist_search_users=Doorzoek gebruikers
 settings.protect_whitelist_teams=Teams for which members of them can push to this branch
 settings.protect_whitelist_search_teams=Search teams
 settings.update_protect_branch_success=Protect options for this branch has been updated successfully!
@@ -724,18 +735,20 @@ settings.allow_public_wiki_desc=Allow public access to wiki when repository is p
 settings.use_external_wiki=Externe wiki gebruiken
 settings.external_wiki_url=Externe wiki-URL
 settings.external_wiki_url_desc=Bezoekers worden doorgestuurd naar de URL als ze op het tabblad klikken.
-settings.issues_desc=Kwestietracker inschakelen
-settings.use_internal_issue_tracker=Gebruik ingebouwde eenvoudige kwestietracker
+settings.issues_desc=Issuetracker inschakelen
+settings.use_internal_issue_tracker=Gebruik ingebouwde eenvoudige issuetracker
 settings.allow_public_issues_desc=Allow public access to issues when repository is private
 settings.use_external_issue_tracker=Externe issuetracker gebruiken
-settings.external_tracker_url=URL externe kwestietracker
+settings.external_tracker_url=URL externe issuetracker
 settings.external_tracker_url_desc=Bezoekers worden doorgestuurd naar de URL als ze op het tabblad klikken.
 settings.tracker_url_format=URL-formaat externe issuetracker
-settings.tracker_issue_style=Naamgevingstijl externe kwestietracker:
+settings.tracker_issue_style=Naamgevingstijl externe issuetracker:
 settings.tracker_issue_style.numeric=Nummeriek
 settings.tracker_issue_style.alphanumeric=Alfanummeriek
 settings.tracker_url_format_desc=U kan de aanduidingen <code>{user} {repo} {index}</code> gebruiken voor de gebruikersnaam, de naam van de repository en de lijst van open tickets.
-settings.pulls_desc=Schakel 'pull request' in om publieke bijdragen te mogelijk te maken
+settings.pulls_desc=Enable pull requests to accept contributions between repositories and branches
+settings.pulls.ignore_whitespace=Ignore changes in whitespace
+settings.pulls.allow_rebase_merge=Allow use rebase to merge commits
 settings.danger_zone=Gevaren zone
 settings.cannot_fork_to_same_owner=You cannot fork a repository to its original owner.
 settings.new_owner_has_same_repo=De nieuwe eigenaar heeft al een repositorie met deze naam
@@ -756,7 +769,7 @@ settings.wiki_deletion_success=De repository met wiki data is succesvol gewist.
 settings.delete=Verwijder deze repositorie
 settings.delete_desc=Als u eenmaal een repositorie verwijderd is er geen weg terug. Gelieve zeker te zijn van uw acties.
 settings.delete_notices_1=- Deze bewerking kan <strong>NIET</strong> ongedaan gemaakt worden.
-settings.delete_notices_2=- Deze bewerking verwijdert permanent alle informatie van deze repository met inbegrip van Git gegevens, tickets, opmerkingen en de toegang van medewerkers.
+settings.delete_notices_2=- This operation will permanently delete everything in this repository, including Git data, issues, comments and collaborator access.
 settings.delete_notices_fork_1=- All forks will become independent after deletion.
 settings.deletion_success=Repository is succesvol verwijderd!
 settings.update_settings_success=Repositorie instellingen zijn succesvol bijgewerkt.
@@ -806,7 +819,7 @@ settings.event_send_everything=Ik moet <strong>alles</strong> hebben.
 settings.event_choose=Laat me kiezen wat ik nodig heb.
 settings.event_create=Creëer
 settings.event_create_desc=Branch, of tag aangemaakt
-settings.event_delete=Delete
+settings.event_delete=Verwijderen
 settings.event_delete_desc=Branch or tag deleted
 settings.event_fork=Fork
 settings.event_fork_desc=Repository forked
@@ -814,10 +827,10 @@ settings.event_push=Push
 settings.event_push_desc=Git push naar een repository
 settings.event_issues=Issues
 settings.event_issues_desc=Issue opened, closed, reopened, edited, assigned, unassigned, label updated, label cleared, milestoned, or demilestoned.
-settings.event_issue_comment=Issue Comment
-settings.event_issue_comment_desc=Issue comment created, edited, or deleted.
 settings.event_pull_request=Pull request
 settings.event_pull_request_desc=Pull request opened, closed, reopened, edited, assigned, unassigned, label updated, label cleared, milestoned, demilestoned, or synchronized.
+settings.event_issue_comment=Issue Comment
+settings.event_issue_comment_desc=Issue comment created, edited, or deleted.
 settings.event_release=Release
 settings.event_release_desc=Release published in a repository.
 settings.active=Actief
@@ -830,6 +843,7 @@ settings.recent_deliveries=Recente bezorgingen
 settings.hook_type=Type hook
 settings.add_slack_hook_desc=<a href="%s"> toegestane vertraging</a> integratie toevoegen aan uw repository.
 settings.add_discord_hook_desc=Add <a href="%s">Discord</a> integration to your repository.
+settings.add_dingtalk_hook_desc=Add <a href="%s">Dingtalk</a> integration to your repository.
 settings.slack_token=Slack token
 settings.slack_domain=Slack domein
 settings.slack_channel=Slack kanaal
@@ -846,6 +860,8 @@ settings.add_key_success=Nieuwe deploy sleutel '%s' werd succesvol toegevoegd!
 settings.deploy_key_deletion=Verwijder deploy sleutel
 settings.deploy_key_deletion_desc=Het verwijderen van deze deploy sleutel zal alle gerelateerde toegang verwijderen voor deze repositorie. Wilt u doorgaan?
 settings.deploy_key_deletion_success=Deploy sleutel werd met succes verwijderd!
+settings.description_desc=Description of repository. Maximum 512 characters length.
+settings.description_length=Available characters
 
 diff.browse_source=Bladeren bron
 diff.parent=bovenliggende
@@ -1078,14 +1094,15 @@ repos.name=Naam
 repos.private=Prive
 repos.watches=Volgers
 repos.stars=Sterren
-repos.issues=Kwesties
+repos.issues=Issues
 repos.size=Size
 
-auths.auth_manage_panel=Authenticatie-beheer paneel
+auths.auth_sources=Authentication Sources
 auths.new=Nieuwe bron toevoegen
 auths.name=Naam
 auths.type=Type
 auths.enabled=Ingeschakeld
+auths.default=Default
 auths.updated=Bijgewerkt
 auths.auth_type=Authenticatietype
 auths.auth_name=Authenticatienaam
@@ -1094,6 +1111,7 @@ auths.domain=Domein
 auths.host=Host
 auths.port=Poort
 auths.bind_dn=Binden DN
+auths.bind_dn_helper=You can use '%s' as placeholder for username, e.g. DOM\%s
 auths.bind_password=Bind wachtwoord
 auths.bind_password_helper=Opgelet: Dit wachtwoord wordt opgeslagen als leesbare tekst. Gebruik geen account met verhoogde rechten.
 auths.user_base=User Search Base
@@ -1121,9 +1139,9 @@ auths.enable_tls=Activeer TLS-encryptie
 auths.skip_tls_verify=TLS-verificatie overslaan
 auths.pam_service_name=PAM servicenaam
 auths.enable_auto_register=Activeer automatische registratie
-auths.tips=Tips
 auths.edit=Verificatie-instelling bewerken
 auths.activated=Deze autorisatiemethode is geactiveerd
+auths.default_auth=This authentication is default login source
 auths.new_success=Nieuwe authenticatie '%s' werd toegevoegd.
 auths.update_success=Authenticatie instellingen zijn succesvol gewijzigd.
 auths.update=Authenticatie-instellingen bijwerken
@@ -1134,6 +1152,7 @@ auths.still_in_used=This authentication is still used by some users, please dele
 auths.deletion_success=Authenticatie is met succes verwijderd!
 auths.login_source_exist=Login source '%s' already exists.
 
+config.not_set=(not set)
 config.server_config=Serverconfiguratie
 config.app_name=Applicatienaam
 config.app_ver=Applicatieversie
@@ -1155,6 +1174,7 @@ config.ssh_domain=Domein
 config.ssh_port=Poort
 config.ssh_listen_port=Luister op poort
 config.ssh_root_path=Root-pad
+config.ssh_rewrite_authorized_keys_at_start=Rewrite authorized_keys At Start
 config.ssh_key_test_path=Pad voor key-tests
 config.ssh_keygen_path=Pad van keygen ('ssh-keygen')
 config.ssh_minimum_key_size_check=Controleer minimale key-lengte
@@ -1170,6 +1190,9 @@ config.disable_http_git=Disable HTTP Git
 config.enable_local_path_migration=Enable Local Path Migration
 config.commits_fetch_concurrency=Commits Fetch Concurrency
 
+config.http_config=HTTP Configuration
+config.http_access_control_allow_origin=Access Control Allow Origin
+
 config.db_config=Databaseconfiguratie
 config.db_type=Type
 config.db_host=Host
@@ -1199,7 +1222,7 @@ config.skip_tls_verify=TLS certificaat controle overslaan
 config.mailer_config=Mailerconfiguatie
 config.mailer_enabled=Ingeschakeld
 config.mailer_disable_helo=Schakel HELO uit
-config.mailer_name=Naam
+config.mailer_subject_prefix=Subject Prefix
 config.mailer_host=Host
 config.mailer_user=Gebruiker
 config.send_test_mail=Testbericht verzenden
@@ -1272,14 +1295,13 @@ notices.delete_success=System notices have been deleted successfully.
 
 [action]
 create_repo=repositorie aangemaakt in <a href="%s">%s</a>
-fork_repo=forked a repository to <a href="%s">%s</a>
 rename_repo=hernoemde repository van <code>%[1]s</code> naar <a href="%[2]s">%[3]s</a>
 commit_repo=push update naar <a href="%[1]s/src/%[2]s">%[3]s</a> in <a href="%[1]s">%[4]s</a>
 compare_commits=Toon vergelijking voor deze %d commits
 transfer_repo=repositorie verplaatst naar <code>%s</code> naar <a href="%s">%s</a>
 create_issue=`opende issue in <a href="%s/issues/%s">%s#%[2]s</a>`
-close_issue=`sloot kwestie <a href="%s/issues/%s">%s#%[2]s</a>`
-reopen_issue=`heropende kwestie <a href="%s/issues/%s">%s#%[2]s</a>`
+close_issue=`gesloten issue <a href="%s/issues/%s">%s#%[2]s</a>`
+reopen_issue=`heropende issue <a href="%s/issues/%s">%s#%[2]s</a>`
 comment_issue=`reactie op issue <a href="%s/issues/%s">%s#%[2]s</a>`
 create_pull_request=`maakte pull request <a href="%s/issues/%s">%s#%[2]s</a>`
 close_pull_request=`sloot pull request <a href="%s/issues/%s">%s#%[2]s</a>`
@@ -1289,6 +1311,10 @@ create_branch=created new branch <a href="%[1]s/src/%[2]s">%[3]s</a> at <a href=
 delete_branch=deleted branch <code>%[2]s</code> at <a href="%[1]s">%[3]s</a>
 push_tag=geduwd label <a href="%s/src/%s"> %[2]s</a> naar <a href="%[1]s"> %[3]s</a>
 delete_tag=deleted tag <code>%[2]s</code> at <a href="%[1]s">%[3]s</a>
+fork_repo=forked a repository to <a href="%s">%s</a>
+mirror_sync_push=synced commits to <a href="%[1]s/src/%[2]s">%[3]s</a> at <a href="%[1]s">%[4]s</a> from mirror
+mirror_sync_create=synced new reference <a href="%s/src/%s">%[2]s</a> to <a href="%[1]s">%[3]s</a> from mirror
+mirror_sync_delete=synced and deleted reference <code>%[2]s</code> at <a href="%[1]s">%[3]s</a> from mirror
 
 [tool]
 ago=geleden

conf/locale/locale_pl-PL.ini

@@ -40,7 +40,7 @@ your_settings=Twoje ustawienia
 
 activities=Aktywności
 pull_requests=Oczekujące zmiany
-issues=Zagadnienia
+issues=Problemy
 
 cancel=Anuluj
 
@@ -151,6 +151,8 @@ register_hepler_msg=Masz już konto? Zaloguj się teraz!
 social_register_hepler_msg=Masz już konto? Powiąż je teraz!
 disable_register_prompt=Przepraszamy rejestracja została wyłączona. Prosimy o kontakt z administratorem serwisu.
 disable_register_mail=Przepraszamy, potwierdzenia rejestracji zostały wyłączone przez administratora.
+auth_source=Źródło uwierzytelniania
+local=Lokalne
 remember_me=Zapamiętaj mnie
 forgot_password=Zapomniałem hasła
 forget_password=Zapomniałeś hasła?
@@ -229,6 +231,7 @@ org_name_been_taken=Nazwa organizacji jest już zajęta.
 team_name_been_taken=Nazwa zespołu jest już zajęta.
 email_been_used=Adres e-mail jest już zarejestrowany.
 username_password_incorrect=Nazwa użytkownika lub hasło nie jest prawidłowe.
+auth_source_mismatch=Wybrane źródło uwierzytelniania nie jest związane z użytkownikiem.
 enterred_invalid_repo_name=Upewnij się, że wprowadzona nazwa repozytorium jest poprawna.
 enterred_invalid_owner_name=Upewnij się, że nazwa właściciela repozytorium jest poprawna.
 enterred_invalid_password=Proszę upewnij się, że wprowadzono hasło jest poprawne.
@@ -348,6 +351,7 @@ two_factor_or_enter_secret=Lub wprowadź sekret:
 two_factor_then_enter_passcode=Następnie wprowadź kod dostępu:
 two_factor_verify=Weryfikuj
 two_factor_invalid_passcode=Wprowadzony kod nie jest prawidłowy, spróbuj ponownie!
+two_factor_reused_passcode=Ten kod jest już używany, spróbuj ponownie!
 two_factor_enable_error=Włączenie dwuetapowego uwierzytelniania nie powiodło się: %v
 two_factor_enable_success=Uwierzytelnianie dwuetapowe Twojego konta zostało włączone pomyślnie!
 two_factor_recovery_codes_title=Kody odzyskiwania uwierzytelniania dwuetapowego
@@ -417,6 +421,8 @@ mirror_last_synced=Ostatnia synchronizacja
 watchers=Obserwujący
 stargazers=Polubienia
 forks=Forki
+repo_description_helper=Opis repozytorium. Maksymalnie 512 znaków.
+repo_description_length=Dostępne znaki
 
 form.reach_limit_of_creation=Właściciel osiągnął limit maksymalnej ilości repozytoriów %d.
 form.name_reserved=Nazwa repozytorium „%s” jest zarezerwowana.
@@ -514,6 +520,7 @@ editor.file_changed_while_editing=Zawartość pliku została zmieniona od rozpoc
 editor.file_already_exists=Nazwa pliku '%s' już istnieje w tym repozytorium.
 editor.no_changes_to_show=Brak zmian do pokazania.
 editor.fail_to_update_file=Tworzenie/aktualizacja pliku '%s' nie powiodła się z błędem: %v
+editor.fail_to_delete_file=Nie można usunąć pliku '%s' z powodu błędu: %v
 editor.add_subdir=Dodaj podkatalog...
 editor.unable_to_upload_files=Wysyłanie plików do '%s' nie powiodło się z błędem: %v
 editor.upload_files_to_dir=Prześlij pliki do '%s'
@@ -616,6 +623,7 @@ pulls.compare_compare=porównaj
 pulls.filter_branch=Filtruj branch
 pulls.no_results=Nie znaleziono wyników.
 pulls.nothing_to_compare=Nie ma nic do porównania, ponieważ gałęzie bazy i head są identyczne.
+pulls.nothing_merge_base=Nie ma nic do porównania, ponieważ dwie gałęzie mają zupełnie inną historię.
 pulls.has_pull_request=`Istnieje już pull request dla tych dwóch celów: <a href="%[1]s/pulls/%[3]d">%[2]s#%[3]d</a>`
 pulls.create=Utwórz Pull Request
 pulls.title_desc=chce scalić %[1]d commity/ów z <code>%[2]s</code> do <code>%[3]s</code>
@@ -631,6 +639,9 @@ pulls.is_checking=Sprawdzanie konfliktów jeszcze trwa, proszę odświeżyć str
 pulls.can_auto_merge_desc=Pull request może być automatycznie scalony.
 pulls.cannot_auto_merge_desc=Pull request nie może być automatycznie scalony z powodu konfliktów.
 pulls.cannot_auto_merge_helper=Proszę scalić ręcznie, aby rozwiązać konflikty.
+pulls.create_merge_commit=Utwórz scalający commit
+pulls.rebase_before_merging=Rebase przed scaleniem
+pulls.commit_description=Opis commitu
 pulls.merge_pull_request=Scal Pull Request
 pulls.open_unmerged_pull_exists=`Nie można otworzyć ponownie ponieważ już istnieje gotowy do scalenia pull request (#%d) z tego samego repozytorium z tymi samymi informacjami.`
 pulls.delete_branch=Usuń gałąź
@@ -735,7 +746,9 @@ settings.tracker_issue_style=Styl nazw zewnętrznego systemu zgłaszania problem
 settings.tracker_issue_style.numeric=Numeryczny
 settings.tracker_issue_style.alphanumeric=Alfanumeryczne
 settings.tracker_url_format_desc=Symbole zastępcze <code>{user} {repo} {index}</code> mogą być użyte dla nazwy użytkownika, nazwy repozytorium i numeru problemu.
-settings.pulls_desc=Włącz obsługę pull request, aby akceptować publiczny wkład
+settings.pulls_desc=Włącz żądania pobierania, aby akceptować wkład pomiędzy repozytoriami i gałęziami
+settings.pulls.ignore_whitespace=Ignoruj zmiany w białych znakach
+settings.pulls.allow_rebase_merge=Zezwalaj na użycie rebase do scalenia commitów
 settings.danger_zone=Strefa niebezpieczeństwa
 settings.cannot_fork_to_same_owner=Nie można sforkować repozytorium do pierwotnego właściciela.
 settings.new_owner_has_same_repo=Nowy właściciel już posiada repozytorium o tej samej nazwie.
@@ -814,10 +827,10 @@ settings.event_push=Wypchnięcie
 settings.event_push_desc=Wypchnięcie (push) do repozytorium Git
 settings.event_issues=Zagadnienia
 settings.event_issues_desc=Zagadnienie otwarte, zamknięte, ponownie otwarte, wyedytowane, przypisane, nieprzypisane, etykieta uaktualniona, etykieta wyczyszczona, kamień milowy, kamień milowy usunięty.
-settings.event_issue_comment=Komentarz zagadnienia
-settings.event_issue_comment_desc=Komentarz zagadnienia utworzony, wyedytowany lub usunięty.
 settings.event_pull_request=Pull Request
 settings.event_pull_request_desc=Pull request otwarty, zamknięty, ponownie otwarty, edytowany, przypisany, nieprzypisany, etykieta zaktualizowana, etykieta wyczyszczona, kamień milowy, kamień milowy wyczyszczony; lub zsynchronizowany.
+settings.event_issue_comment=Komentarz zagadnienia
+settings.event_issue_comment_desc=Komentarz zagadnienia utworzony, wyedytowany lub usunięty.
 settings.event_release=Wydanie
 settings.event_release_desc=Wydanie opublikowane w repozytorium.
 settings.active=Aktywny
@@ -830,6 +843,7 @@ settings.recent_deliveries=Ostatnie wywołania
 settings.hook_type=Typ hooka
 settings.add_slack_hook_desc=Dodaj integrację ze <a href="%s">Slackiem</a> do Twojego repozytorium.
 settings.add_discord_hook_desc=Dodaj integrację <a href="%s">Discord</a> do Twojego repozytorium.
+settings.add_dingtalk_hook_desc=Dodaj integrację <a href="%s">Dingtalk</a> do Twojego repozytorium.
 settings.slack_token=Token
 settings.slack_domain=Domena
 settings.slack_channel=Kanał
@@ -846,6 +860,8 @@ settings.add_key_success=Nowy klucz wdrożenia '%s' został pomyślnie dodany!
 settings.deploy_key_deletion=Utwórz klucz wdrożenia
 settings.deploy_key_deletion_desc=Usunięcie tego klucza wdrożenia spowoduje usunięcie powiązanego dostępu do tego repozytorium. Czy chcesz kontynuować?
 settings.deploy_key_deletion_success=Klucz wdrożenia został pomyślnie usunięty!
+settings.description_desc=Opis repozytorium. Maksymalnie 512 znaków.
+settings.description_length=Dostępne znaki
 
 diff.browse_source=Przeglądaj źródła
 diff.parent=rodzic
@@ -1081,11 +1097,12 @@ repos.stars=Polubienia
 repos.issues=Problemy
 repos.size=Rozmiar
 
-auths.auth_manage_panel=Panel zarządzania uwierzytelnianiem
+auths.auth_sources=Źródła uwierzytelniania
 auths.new=Dodaj nowe źródło
 auths.name=Nazwa
 auths.type=Typ
 auths.enabled=Włączono
+auths.default=Domyślne
 auths.updated=Zaktualizowano
 auths.auth_type=Typ uwierzytelniania
 auths.auth_name=Nazwa uwierzytelniania
@@ -1094,6 +1111,7 @@ auths.domain=Domena
 auths.host=Host
 auths.port=Port
 auths.bind_dn=Bind DN
+auths.bind_dn_helper=Możesz użyć '%s' jako symbol zastępczy dla nazwy użytkownika, np. DOM\%s
 auths.bind_password=Hasło Bind
 auths.bind_password_helper=Ostrzeżenie: To hasło jest przechowywane w postaci zwykłego tekstu. Nie należy używać wysoko uprzywilejowanego konta.
 auths.user_base=Baza wyszukiwania
@@ -1121,9 +1139,9 @@ auths.enable_tls=Włącz szyfrowanie TLS
 auths.skip_tls_verify=Pomiń weryfikację protokołu TLS
 auths.pam_service_name=Nazwa usługi PAM
 auths.enable_auto_register=Włącz automatyczną rejestrację
-auths.tips=Wskazówki
 auths.edit=Edytuj ustawienia uwierzytelniania
 auths.activated=To uwierzytelnienie zostało aktywowane
+auths.default_auth=To uwierzytelnianie jest domyślnym źródłem logowania
 auths.new_success=Pomyślnie dodano nowe uwierzytelnianie '%s'.
 auths.update_success=Ustawienia uwierzytelnienia zostały zaktualizowane pomyślnie.
 auths.update=Aktualizuj ustawienia uwierzytelniania
@@ -1134,6 +1152,7 @@ auths.still_in_used=Ten rodzaj autentykacji jest wciąż wykorzystywany przez ni
 auths.deletion_success=Uwierzytelnienie zostało usunięte pomyślnie!
 auths.login_source_exist=Login '%s' już istnieje.
 
+config.not_set=(nie ustawiono)
 config.server_config=Konfiguracja serwera
 config.app_name=Nazwa aplikacji
 config.app_ver=Wersja aplikacji
@@ -1155,6 +1174,7 @@ config.ssh_domain=Domena
 config.ssh_port=Port
 config.ssh_listen_port=Port nasłuchu
 config.ssh_root_path=Ścieżka katalogu głównego
+config.ssh_rewrite_authorized_keys_at_start=Przepisz authorized_keys przy uruchomieniu
 config.ssh_key_test_path=Ścieżka klucza testowego
 config.ssh_keygen_path=Ścieżka generatora ('ssh-keygen')
 config.ssh_minimum_key_size_check=Sprawdzanie minimalnej długości klucza
@@ -1170,6 +1190,9 @@ config.disable_http_git=Wyłącz HTTP Git
 config.enable_local_path_migration=Włącz lokalną ścieżkę migracji
 config.commits_fetch_concurrency=Pobieraj zmiany w trybie równoległym
 
+config.http_config=Konfiguracja HTTP
+config.http_access_control_allow_origin=Kontrola Dostępu Uwzględnia Źródło
+
 config.db_config=Konfiguracja bazy danych
 config.db_type=Typ
 config.db_host=Host
@@ -1199,7 +1222,7 @@ config.skip_tls_verify=Pomiń weryfikację protokołu TLS
 config.mailer_config=Konfiguracja poczty
 config.mailer_enabled=Aktywne
 config.mailer_disable_helo=Wyłącz HELO
-config.mailer_name=Nazwa
+config.mailer_subject_prefix=Prefiks tematu
 config.mailer_host=Host
 config.mailer_user=Użytkownik
 config.send_test_mail=Wyślij email testowy
@@ -1272,7 +1295,6 @@ notices.delete_success=Powiadomienia systemowe zostały pomyślnie usunięte.
 
 [action]
 create_repo=tworzy repozytorium <a href="%s">%s</a>
-fork_repo=rozwidlone repozytorium do <a href="%s"> %s</a>
 rename_repo=zmienia nazwę repozytorium <code>%[1]s</code> na <a href="%[2]s">%[3]s</a>
 commit_repo=wypycha do <a href="%[1]s/src/%[2]s">%[3]s</a> w <a href="%[1]s">%[4]s</a>
 compare_commits=Zobacz porównanie tych %d commitów
@@ -1289,6 +1311,10 @@ create_branch=stworzył nową gałąź <a href="%[1]s/src/%[2]s">%[3]s</a> at <a
 delete_branch=usunął gałąź <code>%[2]s</code> at <a href="%[1]s">%[3]s</a>
 push_tag=taguje <a href="%s/src/%s">%[2]s</a> w <a href="%[1]s">%[3]s</a>
 delete_tag=usunięty tag <code>%[2]s</code> % <a href="%[1]s">[3]s</a>
+fork_repo=rozwidlone repozytorium do <a href="%s"> %s</a>
+mirror_sync_push=zsynchronizowano commit z <a href="%[1]s/src/%[2]s">%[3]s</a> na <a href="%[1]s">%[4]s</a> z kopii lustrzanej
+mirror_sync_create=synced new reference <a href="%s/src/%s">%[2]s</a> to <a href="%[1]s">%[3]s</a> from mirror
+mirror_sync_delete=synced and deleted reference <code>%[2]s</code> at <a href="%[1]s">%[3]s</a> from mirror
 
 [tool]
 ago=temu

conf/locale/locale_pt-BR.ini

@@ -1,7 +1,7 @@
-app_desc=Um serviço de Git hospedável e amigável escrito em Go
+app_desc=Um serviço de Git auto-hospedado e amigável escrito em Go
 
 home=Página inicial
-dashboard=Página Inicial
+dashboard=Painel de controle
 explore=Explorar
 help=Ajuda
 sign_in=Entrar
@@ -11,11 +11,11 @@ register=Registrar
 website=Site
 version=Versão
 page=Página
-template=Template
+template=Modelo
 language=Idioma
 create_new=Criar...
-user_profile_and_more=Perfil do usuário e configurações
-signed_in_as=Logado como
+user_profile_and_more=Perfil do usuário e mais
+signed_in_as=Entrou como
 
 username=Usuário
 email=E-mail
@@ -48,7 +48,7 @@ cancel=Cancelar
 install=Instalação
 title=Etapas de instalação para primeira execução
 docker_helper=Se você está rodando o Gogs dentro do Docker, por favor leia os <a target="_blank" href="%s">Guias</a> cuidadosamente antes de mudar qualquer coisa nesta página!
-requite_db_desc=Gogs requires MySQL, PostgreSQL, SQLite3, MSSQL or TiDB.
+requite_db_desc=O Gogs requer MySQL, PostgreSQL, SQLite3, MSSQL ou TiDB.
 db_title=Configurações de banco de dados
 db_type=Tipo de banco de dados
 host=Host
@@ -58,8 +58,8 @@ db_name=Nome do banco de dados
 db_helper=Por favor, use o mecanismo INNODB com o conjunto de caracteres utf8_general_ci para MySQL.
 ssl_mode=Modo SSL
 path=Caminho
-sqlite_helper=The file path of SQLite3 database. <br>Please use absolute path when you start as service.
-err_empty_db_path=SQLite3 database path cannot be empty.
+sqlite_helper=Caminho para o arquivo de banco de dados SQLite3. <br>Use o caminho absoluto ao iniciar como serviço.
+err_empty_db_path=Deve haver um caminho para o banco de dados SQLite3.
 no_admin_and_disable_registration=Você não pode desabilitar o registro sem criar uma conta de administrador.
 err_empty_admin_password=A senha de administrador não pode ser vazia.
 
@@ -74,16 +74,16 @@ domain=Domínio
 domain_helper=Isto afeta URLs para o clone via SSH.
 ssh_port=Porta SSH
 ssh_port_helper=Número da porta que seu servidor SSH está usando, deixe vazio para desativar o recurso SSH.
-use_builtin_ssh_server=Use Builtin SSH Server
-use_builtin_ssh_server_popup=Start builtin SSH server for Git operations to distinguish from system SSH daemon.
+use_builtin_ssh_server=Usar o servidor SSH embutido
+use_builtin_ssh_server_popup=Iniciar o servidor SSH embutido para operações Git, para diferenciar do serviço SSH do sistema.
 http_port=Porta HTTP
 http_port_helper=Número da porta em que a aplicação irá executar.
 app_url=URL do aplicativo
 app_url_helper=Isto afeta a URL de clone via HTTP/HTTPs e também o e-mail.
 log_root_path=Caminho do log
 log_root_path_helper=Pasta dos arquivos de log.
-enable_console_mode=Enable Console Mode
-enable_console_mode_popup=In addition to file mode, also print logs to console.
+enable_console_mode=Ativar o modo de console
+enable_console_mode_popup=Além do modo de arquivo, exibir registros (log) no console.
 
 optional_title=Configurações opcionais
 email_title=Configurações do serviço de e-mail
@@ -119,7 +119,7 @@ sqlite3_not_available=Sua versão não suporta SQLite3, por favor faça o downlo
 invalid_db_setting=Configuração do banco de dados não está correta: %v
 invalid_repo_path=A raiz do repositório é inválida: %v
 run_user_not_match=O usuário da execução não é o usuário atual: %s -> %s
-smtp_host_missing_port=SMTP Host is missing port in address.
+smtp_host_missing_port=O endereço do host SMTP não possui porta.
 invalid_smtp_from=O SMTP do campo não é válido: %v
 save_config_failed=Falha ao salvar a configuração: %v
 invalid_admin_setting=Configuração da conta de administrador está inválida: %v
@@ -151,6 +151,8 @@ register_hepler_msg=Já tem uma conta? Entre agora!
 social_register_hepler_msg=Já tem uma conta? Junte-se agora!
 disable_register_prompt=Desculpe, novos registros estão desabilitados. Por favor entre em contato com o administrador do site.
 disable_register_mail=Desculpe, a confirmação de registro por e-mail foi desabilitada.
+auth_source=Authentication Source
+local=Local
 remember_me=Lembrar de mim
 forgot_password=Esqueci a senha
 forget_password=Esqueceu a senha?
@@ -169,13 +171,13 @@ reset_password_helper=Clique aqui para redefinir sua senha
 password_too_short=O comprimento da senha não pode ser menor que 6.
 non_local_account=Não é possível mudar a senha de contas remotas pelo Gogs.
 
-login_two_factor=Two-factor Authentication
-login_two_factor_passcode=Authentication Passcode
-login_two_factor_enter_recovery_code=Enter a two-factor recovery code
-login_two_factor_recovery=Two-factor Recovery
-login_two_factor_recovery_code=Recovery Code
-login_two_factor_enter_passcode=Enter a two-factor passcode
-login_two_factor_invalid_recovery_code=Recovery code has been used or does not valid.
+login_two_factor=Autenticação de dois fatores
+login_two_factor_passcode=Senha de Autenticação
+login_two_factor_enter_recovery_code=Insira um código de recuperação
+login_two_factor_recovery=Recuperação de autenticação
+login_two_factor_recovery_code=Código de Recuperação
+login_two_factor_enter_passcode=Insira uma senha p/ autenticação
+login_two_factor_invalid_recovery_code=O código de recuperação já foi usado ou é inválido.
 
 [mail]
 activate_account=Por favor, ative sua conta
@@ -212,7 +214,7 @@ Content=Conteúdo
 require_error=` não pode estar vazio.`
 alpha_dash_error=` devem ser caracteres alfanuméricos, hífen (-) ou sublinhado (_).`
 alpha_dash_dot_error=` devem ser caracteres alfanuméricos ou hífen (-) ou sublinhado (_).`
-alpha_dash_dot_slash_error=` must be valid alpha or numeric or dash(-_) or dot characters or slashes.`
+alpha_dash_dot_slash_error=` apenas alfanuméricos e pontuações (hifens, pontos e barras).`
 size_error=`deve ser do tamanho %s.`
 min_size_error=` deve conter pelo menos %s caracteres.`
 max_size_error=` deve conter no máximo %s caracteres.`
@@ -229,6 +231,7 @@ org_name_been_taken=Nome da organização já foi tomado.
 team_name_been_taken=Nome da equipe já existe.
 email_been_used=Endereço de e-mail já foi usado.
 username_password_incorrect=Usuário ou senha incorretos.
+auth_source_mismatch=The authentication source selected is not associated with the user.
 enterred_invalid_repo_name=Por favor certifique-se que informou o nome do repositório corretamente.
 enterred_invalid_owner_name=Por favor, verifique se o nome do proprietário está correto.
 enterred_invalid_password=Por favor, verifique se a senha que você digitou está correta.
@@ -264,8 +267,8 @@ profile=Perfil
 password=Senha
 avatar=Avatar
 ssh_keys=Chaves SSH
-security=Security
-repos=Repositories
+security=Segurança
+repos=Repositórios
 orgs=Organizações
 applications=Aplicativos
 delete=Deletar conta
@@ -334,30 +337,31 @@ no_activity=Nenhuma atividade recente
 key_state_desc=Usada a pelo menos 7 dias
 token_state_desc=Este token é usado em pelo menos 7 dias
 
-two_factor=Two-factor Authentication
-two_factor_status=Status:
-two_factor_on=On
-two_factor_off=Off
-two_factor_enable=Enable
-two_factor_disable=Disable
-two_factor_view_recovery_codes=View and save <a href="%s%s">your recovery codes</a> in a safe place. You can use them as passcode if you lose access to your authentication application.
-two_factor_http=For HTTP/HTTPS operations, you are no longer able to use plain username and password. Please create and use <a href="%[1]s%[2]s">Personal Access Token</a> as your credential, e.g. <code>%[3]s</code>.
-two_factor_enable_title=Enable Two-factor Authentication
-two_factor_scan_qr=Please use your authentication application to scan the image:
-two_factor_or_enter_secret=Or enter the secret:
-two_factor_then_enter_passcode=Then enter passcode:
-two_factor_verify=Verify
-two_factor_invalid_passcode=The passcode you entered is not valid, please try again!
-two_factor_enable_error=Enable Two-factor authentication failed: %v
-two_factor_enable_success=Two-factor authentication has enabled for your account successfully!
-two_factor_recovery_codes_title=Two-factor Authentication Recovery Codes
-two_factor_recovery_codes_desc=Recovery codes are used when you temporarily lose access to your authentication application. Each recovery code can only be used once, <b>please keep these codes in a safe place</b>.
-two_factor_regenerate_recovery_codes=Regenerate Recovery Codes
-two_factor_regenerate_recovery_codes_error=Regenerate recovery codes failed: %v
-two_factor_regenerate_recovery_codes_success=New recovery codes has been generated successfully!
-two_factor_disable_title=Disable Two-factor Authentication
-two_factor_disable_desc=Your account security level will decrease after disabled two-factor authentication. Do you want to continue?
-two_factor_disable_success=Two-factor authentication has disabled successfully!
+two_factor=Autenticação de dois fatores
+two_factor_status=Estado:
+two_factor_on=Ativado
+two_factor_off=Desativado
+two_factor_enable=Ativar
+two_factor_disable=Desativar
+two_factor_view_recovery_codes=Consulte e salve <a href="%s%s">seus códigos de recuperação</a> num local seguro. Você poderá usá-los como senha se perder acesso ao seu aplicativo de autenticação.
+two_factor_http=Para operações em HTTP/HTTPS, você não poderá mais usar seu nome de usuário e senha. Crie e use um <a href="%[1]s%[2]s">Token de Acesso Pessoal</a> como credencial (p. ex.: <code>%[3]%</code>).
+two_factor_enable_title=Ativar autenticação de dois fatores
+two_factor_scan_qr=Use o seu aplicativo de autenticação para escanear a imagem:
+two_factor_or_enter_secret=Ou informe o segredo:
+two_factor_then_enter_passcode=Em seguida digite a senha:
+two_factor_verify=Verificar
+two_factor_invalid_passcode=A senha inserida é inválida. Tente novamente!
+two_factor_reused_passcode=The passcode you entered has already been used, please try another one!
+two_factor_enable_error=Falha ao ativar a autenticação de dois fatores: %v
+two_factor_enable_success=A autenticação de dois fatores foi ativada para a sua conta com sucesso!
+two_factor_recovery_codes_title=Códigos de recup. p/ autenticação de dois fatores
+two_factor_recovery_codes_desc=Os códigos de recuperação são usados se você perder acesso ao seu aplicativo de autenticação. Cada código pode ser usado apenas uma vez. <b>Salve-os num lugar seguro.</b>
+two_factor_regenerate_recovery_codes=Gerar códigos de recuperação
+two_factor_regenerate_recovery_codes_error=Falha ao gerar códigos de recuperação: %v
+two_factor_regenerate_recovery_codes_success=Novos códigos de recuperação gerados com sucesso!
+two_factor_disable_title=Desativar a autenticação de dois fatores
+two_factor_disable_desc=O nível de segurança da sua conta diminuirá após desativar a autenticação de dois fatores. Deseja mesmo continuar?
+two_factor_disable_success=A autenticação de dois fatores foi desativada com sucesso!
 
 manage_access_token=Gerenciar tokens de acesso pessoal
 generate_new_token=Gerar novo token
@@ -375,10 +379,10 @@ orgs.none=Você não é participante de nenhuma organização.
 orgs.leave_title=Deixar uma organização
 orgs.leave_desc=Você perderá acesso a todos os repositórios e equipes após deixar a organização. Deseja continuar?
 
-repos.leave=Leave
-repos.leave_title=Leave repository
-repos.leave_desc=You will lose access to the repository after you left. Do you want to continue?
-repos.leave_success=You have left repository '%s' successfully!
+repos.leave=Sair
+repos.leave_title=Sair do repositório
+repos.leave_desc=Você irá perder acesso ao repositório após sair. Deseja continuar?
+repos.leave_success=Você saiu do repositório “%s” com sucesso!
 
 delete_account=Deletar sua conta
 delete_prompt=A operação deletará sua conta permanentemente, e <strong>NÃO PODERÁ</strong> ser desfeita!
@@ -417,6 +421,8 @@ mirror_last_synced=Última sincronização
 watchers=Observadores
 stargazers=Usuários que estrelaram
 forks=Forks
+repo_description_helper=Description of repository. Maximum 512 characters length.
+repo_description_length=Available characters
 
 form.reach_limit_of_creation=O proprietário atingiu o limite máximo de criação de repositórios de %d.
 form.name_reserved=O nome de repositório '%s' não pode ser usado.
@@ -450,7 +456,7 @@ quick_guide=Guia rápido
 clone_this_repo=Clonar este repositório
 create_new_repo_command=Criar um novo repositório na linha de comando
 push_exist_repo=Push um repositório existente na linha de comando
-bare_message=This repository does not have any content yet.
+bare_message=Este repositório ainda não possui conteúdo.
 
 files=Arquivos
 branch=Branch
@@ -472,12 +478,12 @@ file_permalink=Link permanente
 file_too_large=Este arquivo é muito grande para ser exibido
 video_not_supported_in_browser=Seu navegador não suporta a tag de vídeo do HTML5.
 
-branches.overview=Overview
-branches.active_branches=Active Branches
-branches.stale_branches=Stale Branches
-branches.all=All Branches
-branches.updated_by=Updated %[1]s by %[2]s
-branches.change_default_branch=Change Default Branch
+branches.overview=Visão geral
+branches.active_branches=Branches ativos
+branches.stale_branches=Branches obsoletos
+branches.all=Todos os branches
+branches.updated_by=Atualizado %[1]s por %[2]s
+branches.change_default_branch=Modificar branch padrão
 
 editor.new_file=Novo arquivo
 editor.upload_file=Enviar arquivo
@@ -514,11 +520,12 @@ editor.file_changed_while_editing=O conteúdo do arquivo mudou desde que você c
 editor.file_already_exists=Um arquivo com nome '%s' já existe neste repositório.
 editor.no_changes_to_show=Nenhuma alteração a mostrar.
 editor.fail_to_update_file=Houve erro ao criar ou atualizar arquivo '%s': %v
+editor.fail_to_delete_file=Failed to delete file '%s' with error: %v
 editor.add_subdir=Adicionar o subdiretório...
 editor.unable_to_upload_files=Houve erro ao fazer upload de arquivos para '%s': %v
 editor.upload_files_to_dir=Enviar arquivos para '%s'
 
-commits.commit_history=Commit History
+commits.commit_history=Histórico de commits
 commits.commits=Commits
 commits.search=Pesquisar commits
 commits.find=Buscar
@@ -616,6 +623,7 @@ pulls.compare_compare=comparar
 pulls.filter_branch=Filtrar branch
 pulls.no_results=Nada encontrado.
 pulls.nothing_to_compare=Não há nada para comparar porque o branch base e o head estão iguais.
+pulls.nothing_merge_base=Não há o que comparar pois os dois branches possuem históricos completamente diferentes.
 pulls.has_pull_request=`Já existem pull requests entre esses dois alvos: <a href="%[1]s/pulls/%[3]d">%[2]s#%[3]d</a>`
 pulls.create=Criar Pull Request
 pulls.title_desc=quer mesclar %[1]d commits de <code>%[2]s</code> em <code>%[3]s</code>
@@ -631,6 +639,9 @@ pulls.is_checking=A verificação do conflito ainda está em progresso, por favo
 pulls.can_auto_merge_desc=O merge deste Pull Pequest pode ser aplicado automaticamente.
 pulls.cannot_auto_merge_desc=O merge deste Pull Request não pode ser aplicado automaticamente pois há conflitos.
 pulls.cannot_auto_merge_helper=Por favor, aplique o merge manualmente para resolver os conflitos.
+pulls.create_merge_commit=Criar commit de um merge
+pulls.rebase_before_merging=Rebase before merging
+pulls.commit_description=Commit Description
 pulls.merge_pull_request=Solicitação de merge de Pull Request
 pulls.open_unmerged_pull_exists=`Você não pode executar a operação de reabrir porque já existe um Pull request aberto (#%d) do mesmo repositório com as mesmas informações de merge e está esperando pelo merge.`
 pulls.delete_branch=Excluir Branch
@@ -686,28 +697,28 @@ settings.collaboration.write=Escrita
 settings.collaboration.read=Leitura
 settings.collaboration.undefined=Indefinido
 settings.branches=Branches
-settings.branches_bare=You cannot manage branches for bare repository. Please push some content first.
-settings.default_branch=Default Branch
-settings.default_branch_desc=The default branch is considered the "base" branch for code commits, pull requests and online editing.
-settings.update=Update
-settings.update_default_branch_unsupported=Change default branch is not supported by the Git version on server.
-settings.update_default_branch_success=Default branch of this repository has been updated successfully!
-settings.protected_branches=Protected Branches
-settings.protected_branches_desc=Protect branches from force pushing, accidental deletion and whitelist code committers.
+settings.branches_bare=Não é possível gerenciar branches num repositório vazio. Adicione conteúdo primeiro.
+settings.default_branch=Branch padrão
+settings.default_branch_desc=O branch padrão é considerado branch "base" para commits, pull requests e edição on-line.
+settings.update=Atualizar
+settings.update_default_branch_unsupported=Mudar o branch padrão não é suportado pela versão do Git no servidor.
+settings.update_default_branch_success=O branch padrão deste repositório foi atualizado com sucesso!
+settings.protected_branches=Branches protegidos
+settings.protected_branches_desc=Proteger branches de push forçado, remoção acidental e committers da lista branca.
 settings.choose_a_branch=Selecione um branch...
 settings.branch_protection=Proteção de Branch
-settings.branch_protection_desc=Please choose protect options for branch <b>%s</b>.
-settings.protect_this_branch=Protect this branch
-settings.protect_this_branch_desc=Disable force pushes and prevent from deletion.
-settings.protect_require_pull_request=Require pull request instead direct pushing
-settings.protect_require_pull_request_desc=Enable this option to disable direct pushing to this branch. Commits have to be pushed to another non-protected branch and merged to this branch through pull request.
-settings.protect_whitelist_committers=Whitelist who can push to this branch
-settings.protect_whitelist_committers_desc=Add people or teams to whitelist of direct push to this branch. Users in whitelist will bypass require pull request check.
-settings.protect_whitelist_users=Users who can push to this branch
-settings.protect_whitelist_search_users=Search users
-settings.protect_whitelist_teams=Teams for which members of them can push to this branch
-settings.protect_whitelist_search_teams=Search teams
-settings.update_protect_branch_success=Protect options for this branch has been updated successfully!
+settings.branch_protection_desc=Escolha opções de proteção para o branch <b>%s</b>.
+settings.protect_this_branch=Proteger este branch
+settings.protect_this_branch_desc=Desabilita pushes forçados e previne remoção.
+settings.protect_require_pull_request=Requer pull request ao invés de push direto
+settings.protect_require_pull_request_desc=Habilite esta opção para desabilitar push direto para este branch. Os commits precisam sofrer um push para outro branch não protegido e merge para este branch por meio de um pull request.
+settings.protect_whitelist_committers=Incluir na lista branca quem pode fazer push para este branch
+settings.protect_whitelist_committers_desc=Adicionar pessoas ou equipes para a lista branca de push direto para este branch. Usuários na lista branca contornarão a verificação de necessidade de pull request.
+settings.protect_whitelist_users=Usuários que podem realizar push para este branch
+settings.protect_whitelist_search_users=Pesquisar usuários
+settings.protect_whitelist_teams=Equipes cujos membros podem realizar push para este branch
+settings.protect_whitelist_search_teams=Buscar times
+settings.update_protect_branch_success=As opções de proteção deste branch foram atualizadas com sucesso!
 settings.hooks=Webhooks
 settings.githooks=Hooks do Git
 settings.basic_settings=Configurações básicas
@@ -720,13 +731,13 @@ settings.change_reponame_prompt=Esta mudança irá afetar os links para este rep
 settings.advanced_settings=Configurações avançadas
 settings.wiki_desc=Habilitar sistema de wiki
 settings.use_internal_wiki=Usar wiki nativa
-settings.allow_public_wiki_desc=Allow public access to wiki when repository is private
+settings.allow_public_wiki_desc=Permitir acesso público à wiki quando o repositório for privado
 settings.use_external_wiki=Usar wiki externa
 settings.external_wiki_url=URL externa da wiki
 settings.external_wiki_url_desc=Os visitantes serão redirecionados para a URL ao clicar na aba.
 settings.issues_desc=Habilitar issue tracker
 settings.use_internal_issue_tracker=Usar o issue tracker nativo
-settings.allow_public_issues_desc=Allow public access to issues when repository is private
+settings.allow_public_issues_desc=Permitir acesso público a problemas quando o repositório for privado
 settings.use_external_issue_tracker=Usar issue tracker externo
 settings.external_tracker_url=URL do Issue Tracker Externo
 settings.external_tracker_url_desc=Visitantes serão redirecionados ao URL quando clicarem na aba.
@@ -735,9 +746,11 @@ settings.tracker_issue_style=Estilo de nome de issue tracker externo:
 settings.tracker_issue_style.numeric=Numérico
 settings.tracker_issue_style.alphanumeric=Alfanumérico
 settings.tracker_url_format_desc=Você pode usar o espaço reservado <code>{user} {repo} {index}</code> para o nome do usuário, índice de nome e a questão do repositório.
-settings.pulls_desc=Habilitar Pull Requests para aceitar contribuições públicas
+settings.pulls_desc=Enable pull requests to accept contributions between repositories and branches
+settings.pulls.ignore_whitespace=Ignorar alterações em espaço em branco
+settings.pulls.allow_rebase_merge=Permitir rebase para commits via merge
 settings.danger_zone=Zona de perigo
-settings.cannot_fork_to_same_owner=You cannot fork a repository to its original owner.
+settings.cannot_fork_to_same_owner=Não se pode realizar fork de um repositório para seu dono original.
 settings.new_owner_has_same_repo=O novo dono já tem um repositório com o mesmo nome. Por favor, escolha outro nome.
 settings.convert=Converter para repositório tradicional
 settings.convert_desc=Você pode converter este espelho em um repositório tradicional. Esta ação não pode ser revertida.
@@ -756,7 +769,7 @@ settings.wiki_deletion_success=Dados de wiki do repositório foram deletados com
 settings.delete=Deletar este repositório
 settings.delete_desc=Uma vez que você remova um repositório, não tem volta. Por favor, tenha certeza.
 settings.delete_notices_1=-Esta operação <strong>NÃO PODERÁ</strong> ser desfeita.
-settings.delete_notices_2=- Esta operação irá apagar permanentemente o tudo deste repositório, incluindo os dados do Git, Issues, comentários e acessos dos colaboradores.
+settings.delete_notices_2=- Esta operação irá apagar permanentemente tudo neste repositório, incluindo commits, issues, comentários, o wiki e colaboradores.
 settings.delete_notices_fork_1=-Todos os forks se tornarão independentes após a exclusão.
 settings.deletion_success=Repositório excluído com sucesso!
 settings.update_settings_success=As opções do repositório foram atualizadas com sucesso.
@@ -780,8 +793,8 @@ settings.webhook_deletion_success=Webhook deletado com sucesso!
 settings.webhook.test_delivery=Entrega de teste
 settings.webhook.test_delivery_desc=Enviar uma entrega de evento de Push falso para testar suas configurações de webhook
 settings.webhook.test_delivery_success=O Webhook de teste foi adicionado para a fila de entrega. Pode demorar alguns segundos antes de ser exibido no histórico de entrega.
-settings.webhook.redelivery=Redelivery
-settings.webhook.redelivery_success=Hook task '%s' has been readded to delivery queue. It may take few seconds to update delivery status in history.
+settings.webhook.redelivery=Re-entrega
+settings.webhook.redelivery_success=A tarefa hook '%s' foi readicionada à fila de entrega. Pode demorar alguns segundos para a situação da entrega no histórico ser atualizada.
 settings.webhook.request=Solicitação
 settings.webhook.response=Resposta
 settings.webhook.headers=Cabeçalhos
@@ -796,7 +809,7 @@ settings.add_webhook_desc=Enviaremos uma solicitação <code>POST</code> para o
 settings.payload_url=URL de Payload
 settings.content_type=Tipo de conteúdo
 settings.secret=Secreto
-settings.secret_desc=Secret will be sent as SHA256 HMAC hex digest of payload via <code>X-Gogs-Signature</code> header.
+settings.secret_desc=O segredo será enviado como digest hexadecimal SHA256 HMAC do payload via cabeçalho <code>X-Gogs-Signature</code>.
 settings.slack_username=Nome de usuário
 settings.slack_icon_url=URL do ícone
 settings.slack_color=Cor
@@ -806,20 +819,20 @@ settings.event_send_everything=Preciso de <strong>tudo</strong>.
 settings.event_choose=Deixe-me escolher o que eu preciso.
 settings.event_create=Criar
 settings.event_create_desc=Branch ou Tag criado
-settings.event_delete=Delete
-settings.event_delete_desc=Branch or tag deleted
+settings.event_delete=Apagar
+settings.event_delete_desc=Branch ou tag excluído
 settings.event_fork=Fork
-settings.event_fork_desc=Repository forked
+settings.event_fork_desc=Feito fork do repositório
 settings.event_push=Push
 settings.event_push_desc=Git push para o repositório
-settings.event_issues=Issues
-settings.event_issues_desc=Issue opened, closed, reopened, edited, assigned, unassigned, label updated, label cleared, milestoned, or demilestoned.
-settings.event_issue_comment=Issue Comment
-settings.event_issue_comment_desc=Issue comment created, edited, or deleted.
+settings.event_issues=Problemas
+settings.event_issues_desc=Problema aberto, fechado, reaberto, editado, atribuído, desatribuído, etiqueta atualizada, etiqueta limpa, milestone definido ou milestone indefinido.
 settings.event_pull_request=Pull Request
-settings.event_pull_request_desc=Pull request opened, closed, reopened, edited, assigned, unassigned, label updated, label cleared, milestoned, demilestoned, or synchronized.
-settings.event_release=Release
-settings.event_release_desc=Release published in a repository.
+settings.event_pull_request_desc=Pull request aberto, fechado, reaberto, editado, atribuído, desatribuído, etiqueta atualizada, etiqueta limpa, milestone definido, milestone indefinido ou sincronizado.
+settings.event_issue_comment=Comentário do Problema
+settings.event_issue_comment_desc=Comentário do problema criado, editado ou excluído.
+settings.event_release=Lançamento
+settings.event_release_desc=Lançamento publicado em um repositório.
 settings.active=Ativo
 settings.active_helper=Enviaremos detalhes do evento quando este hook for acionado.
 settings.add_hook_success=Novos hooks de web foram adicionados.
@@ -829,12 +842,13 @@ settings.delete_webhook=Excluir Webhook
 settings.recent_deliveries=Entregas Recentes
 settings.hook_type=Tipo de Hook
 settings.add_slack_hook_desc=Adicionar <a href="%s">Slack</a> de integração para o seu repositório.
-settings.add_discord_hook_desc=Add <a href="%s">Discord</a> integration to your repository.
+settings.add_discord_hook_desc=Adicionar integração do <a href="%s">Discord</a> ao seu repositório.
+settings.add_dingtalk_hook_desc=Adicionar integração do <a href="%s">Dingtalk</a> ao seu repositório.
 settings.slack_token=Token
 settings.slack_domain=Domínio
 settings.slack_channel=Canal
 settings.deploy_keys=Chaves de Deploy
-settings.deploy_keys_helper=<b>Common Gotcha!</b> If you're looking for adding personal public keys, please add them in your <a href="%s%s">account settings</a>.
+settings.deploy_keys_helper=<b>Pegadinha Comum!</b> Se estiver buscando adicionar chaves públicas pessoais, faça isto nas suas <a href="%s%s">configurações da conta</a>.
 settings.add_deploy_key=Nova chave
 settings.deploy_key_desc=Chave de Deploy só tem acesso somente leitura. Não é igual as chaves SSH de conta pessoal.
 settings.no_deploy_keys=Você ainda não adicionou nenhuma chave de Deploy.
@@ -846,6 +860,8 @@ settings.add_key_success=A nova chave de Deploy '%s' foi adicionada com sucesso!
 settings.deploy_key_deletion=Exclusão de chave de Deploy
 settings.deploy_key_deletion_desc=Excluir esta chave de Deploy removerá permissões de acesso a este repositório. Quer mesmo continuar?
 settings.deploy_key_deletion_success=Chave de Deploy excluída com sucesso!
+settings.description_desc=Description of repository. Maximum 512 characters length.
+settings.description_length=Available characters
 
 diff.browse_source=Ver código fonte
 diff.parent=pai
@@ -912,7 +928,7 @@ team_permission_desc=Que nível de permissão esta equipe deve ter?
 
 form.name_reserved=O nome de organização '%s' não pode ser usado.
 form.name_pattern_not_allowed=Não é permitido usar o padrão '%s' para o nome de organização.
-form.team_name_reserved=Team name '%s' is reserved.
+form.team_name_reserved=O nome nome de equipe '%s' está reservado.
 
 settings=Configurações
 settings.options=Opções
@@ -1003,8 +1019,8 @@ dashboard.git_gc_repos=Fazer coleta de lixo nos repositórios
 dashboard.git_gc_repos_success=Em todos repositórios, a coleta de lixo foi realizada com sucesso.
 dashboard.resync_all_sshkeys=Reescrever o arquivo '.ssh/authorized_keys' (atenção: chaves que não sejam do Gogs serão perdidas)
 dashboard.resync_all_sshkeys_success=Todas as chaves públicas foram reescritas com sucesso.
-dashboard.resync_all_hooks=Resync pre-receive, update and post-receive hooks of all repositories
-dashboard.resync_all_hooks_success=All repositories' pre-receive, update and post-receive hooks have been resynced successfully.
+dashboard.resync_all_hooks=Ressincronizar hooks pre-receive, update e post-receive de todos os repositórios
+dashboard.resync_all_hooks_success=Os hooks pre-receive, update e post-receive de todos os repositórios foram ressincronizados com sucesso.
 dashboard.reinit_missing_repos=Reinicializar todos os registros de repositório que perderam os arquivos do Git
 dashboard.reinit_missing_repos_success=Todos os repositórios que perderam arquivos do Git foram reinicializados com sucesso.
 
@@ -1079,13 +1095,14 @@ repos.private=Privado
 repos.watches=Observadores
 repos.stars=Favoritos
 repos.issues=Issues
-repos.size=Size
+repos.size=Tamanho
 
-auths.auth_manage_panel=Painel de gerenciamento da autenticação
+auths.auth_sources=Authentication Sources
 auths.new=Adicionar nova fonte
 auths.name=Nome
 auths.type=Tipo
 auths.enabled=Habilitado
+auths.default=Default
 auths.updated=Atualizado
 auths.auth_type=Tipo de autenticação
 auths.auth_name=Nome da autenticação
@@ -1094,20 +1111,21 @@ auths.domain=Domínio
 auths.host=Host
 auths.port=Porta
 auths.bind_dn=Vincular DN
+auths.bind_dn_helper=Você pode usar '%s' como placeholderpara o nome de usuário, por exemplo, DOM\%s
 auths.bind_password=Vincular senha
 auths.bind_password_helper=Atenção: Esta senha é armazenada em texto plano. Não use uma conta com muitos privilégios.
 auths.user_base=Base de pesquisa do usuário
 auths.user_dn=Usuário do DN
 auths.attribute_username=Atributo nome de usuário
 auths.attribute_username_placeholder=Deixe vazio para usar o valor do campo de formulário de entrada de nome de usuário.
-auths.attribute_name=First Name Attribute
+auths.attribute_name=Atributo do Nome
 auths.attribute_surname=Atributo sobrenome
 auths.attribute_mail=Atributo e-mail
-auths.verify_group_membership=Verify group membership
+auths.verify_group_membership=Verificar associação a grupo
 auths.group_search_base_dn=Group Search Base DN
-auths.group_filter=Group Filter
-auths.group_attribute_contain_user_list=Group Attribute Containing List of Users
-auths.user_attribute_listed_in_group=User Attribute Listed in Group
+auths.group_filter=Filtro de Grupo
+auths.group_attribute_contain_user_list=Atributo do grupo contendo a lista de usuários
+auths.user_attribute_listed_in_group=Atributo do usuário listado no grupo
 auths.attributes_in_bind=Buscar os atributos no contexto de Bind DN
 auths.filter=Filtro de usuário
 auths.admin_filter=Filtro de administrador
@@ -1121,9 +1139,9 @@ auths.enable_tls=Habilitar Criptografia TLS
 auths.skip_tls_verify=Ignorar verificação de TLS
 auths.pam_service_name=Nome de Serviço PAM
 auths.enable_auto_register=Habilitar Registro Automático
-auths.tips=Dicas
 auths.edit=Editar a configuração de autenticação
 auths.activated=Esta autenticação foi ativada
+auths.default_auth=This authentication is default login source
 auths.new_success=Nova autenticação '%s' foi adicionada com sucesso.
 auths.update_success=A configuração da autenticação foi atualizada com sucesso.
 auths.update=Atualizar a configuração da autenticação
@@ -1134,6 +1152,7 @@ auths.still_in_used=Esta autenticação ainda é usada por alguns usuários. Por
 auths.deletion_success=Autenticação excluída com sucesso!
 auths.login_source_exist=A fonte de login '%s" já existe.
 
+config.not_set=(não definido)
 config.server_config=Configuração do servidor
 config.app_name=Nome do aplicativo
 config.app_ver=Versão do aplicativo
@@ -1155,21 +1174,25 @@ config.ssh_domain=Domínio
 config.ssh_port=Porta
 config.ssh_listen_port=Porta de escuta
 config.ssh_root_path=Caminho da raiz
+config.ssh_rewrite_authorized_keys_at_start=Rewrite authorized_keys At Start
 config.ssh_key_test_path=Caminho da chave de teste
 config.ssh_keygen_path=Caminho do keygen ('ssh-keygen')
 config.ssh_minimum_key_size_check=Verificar tamanho mínimo da chave
 config.ssh_minimum_key_sizes=Tamanhos mínimos da chave
 
-config.repo_config=Repository Configuration
+config.repo_config=Configuração do Repositório
 config.repo_root_path=Caminho raiz do repositório
 config.script_type=Tipo de script
-config.repo_force_private=Force Private
-config.max_creation_limit=Max Creation Limit
-config.preferred_licenses=Preferred Licenses
-config.disable_http_git=Disable HTTP Git
-config.enable_local_path_migration=Enable Local Path Migration
+config.repo_force_private=Forçar Privado
+config.max_creation_limit=Limite de Criação
+config.preferred_licenses=Licenças Preferidas
+config.disable_http_git=Desabilitar Git por HTTP
+config.enable_local_path_migration=Permitir a migração de caminho local
 config.commits_fetch_concurrency=Commits Fetch Concurrency
 
+config.http_config=Configuração de HTTP
+config.http_access_control_allow_origin=Access Control Allow Origin
+
 config.db_config=Configuração do banco de dados
 config.db_type=Tipo
 config.db_host=Host
@@ -1199,7 +1222,7 @@ config.skip_tls_verify=Pular verificação de TLS
 config.mailer_config=Configuração de envio de e-mail
 config.mailer_enabled=Habilitado
 config.mailer_disable_helo=Desabilitar HELO
-config.mailer_name=Nome
+config.mailer_subject_prefix=Prefixo do Assunto
 config.mailer_host=Host
 config.mailer_user=Usuário
 config.send_test_mail=Enviar email de teste
@@ -1242,8 +1265,8 @@ config.git_pull_timeout=Timeout para operação de pull
 config.git_gc_timeout=Timeout para execução do GC
 
 config.log_config=Configuração de log
-config.log_mode=Mode
-config.log_options=Options
+config.log_mode=Modo
+config.log_options=Opções
 
 monitor.cron=Tarefas cron
 monitor.name=Nome
@@ -1272,7 +1295,6 @@ notices.delete_success=Avisos do sistema foram excluídos com sucesso.
 
 [action]
 create_repo=repositório criado <a href="%s"> %s</a>
-fork_repo=forked a repository to <a href="%s">%s</a>
 rename_repo=renomeou o o repositório <code>%[1]s</code> para <a href="%[2]s">%[3]s</a>
 commit_repo=pushed para <a href="%[1]s/src/%[2]s">%[3]s</a> em <a href="%[1]s">%[4]s</a>
 compare_commits=Ver comparação entre esses %d commits
@@ -1285,10 +1307,14 @@ create_pull_request=`criou o pull request <a href="%s/pulls/%s">%s#%[2]s</a>`
 close_pull_request=`fechou o pull request <a href="%s/pulls/%s">%s#%[2]s</a>`
 reopen_pull_request=`reabriu o pull request <a href="%s/pulls/%s">%s#%[2]s</a>`
 merge_pull_request=`mesclou o pull request <a href="%s/pulls/%s">%s#%[2]s</a>`
-create_branch=created new branch <a href="%[1]s/src/%[2]s">%[3]s</a> at <a href="%[1]s">%[4]s</a>
-delete_branch=deleted branch <code>%[2]s</code> at <a href="%[1]s">%[3]s</a>
+create_branch=criado novo branch <a href="%[1]s/src/%[2]s">%[3]s</a> em <a href="%[1]s">%[4]s</a>
+delete_branch=excluído branch <code>%[2]s</code> em <a href="%[1]s">%[3]s</a>
 push_tag=Foi feito push na tag <a href="%s/src/%s">%[2]s</a> para <a href="%[1]s">%[3]s</a>
-delete_tag=deleted tag <code>%[2]s</code> at <a href="%[1]s">%[3]s</a>
+delete_tag=excluída tag <code>%[2]s</code> em <a href="%[1]s">%[3]s</a>
+fork_repo=repositório criado <a href="%s"> %s</a>
+mirror_sync_push=synced commits to <a href="%[1]s/src/%[2]s">%[3]s</a> at <a href="%[1]s">%[4]s</a> from mirror
+mirror_sync_create=synced new reference <a href="%s/src/%s">%[2]s</a> to <a href="%[1]s">%[3]s</a> from mirror
+mirror_sync_delete=synced and deleted reference <code>%[2]s</code> at <a href="%[1]s">%[3]s</a> from mirror
 
 [tool]
 ago=atrás

conf/locale/locale_ru-RU.ini

@@ -98,7 +98,7 @@ server_service_title=Сервер и другие настройки служб
 offline_mode=Включение офлайн режима
 offline_mode_popup=Отключить CDN даже в производственном режиме, все файлы ресурсов будут раздаваться локально.
 disable_gravatar=Отключить службу Gravatar
-disable_gravatar_popup=Отключить Gravatar и пользовательские источники, все аватары по-умолчанию загружаются пользователями.
+disable_gravatar_popup=Отключить Gravatar и пользовательские источники. Используются аватары, загружаемые пользователями, или аватары по умолчанию.
 federated_avatar_lookup=Включить поиск внешних Аватаров
 federated_avatar_lookup_popup=Включите Поиск федеративного аватара для использования федеративной службы с открытым исходным кодом на основе libravatar.
 disable_registration=Отключить самостоятельную регистрацию
@@ -119,7 +119,7 @@ sqlite3_not_available=Ваша версия не поддерживает SQLite
 invalid_db_setting=Настройки базы данных не правильные: %v
 invalid_repo_path=Недопустимый путь к корню репозитория: %v
 run_user_not_match=Текущий пользователь не является пользователем для запуска: %s -> %s
-smtp_host_missing_port=SMTP Host is missing port in address.
+smtp_host_missing_port=Не указан порт в адресе хоста SMTP.
 invalid_smtp_from=Поле SMTP From неправильное: %v
 save_config_failed=Не удалось сохранить конфигурацию: %v
 invalid_admin_setting=Указан недопустимый параметр учетной записи администратора: %v
@@ -151,6 +151,8 @@ register_hepler_msg=Уже есть аккаунт? Авторизуйтесь!
 social_register_hepler_msg=Уже есть учетная запись? Свяжите ее с соцсетью!
 disable_register_prompt=Извините,  возможность регистрации отключена. Пожалуйста, свяжитесь с администратором сайта.
 disable_register_mail=К сожалению подтверждение регистрации по почте отключено.
+auth_source=Тип аутентификации
+local=Локальный
 remember_me=Запомнить меня
 forgot_password=Забыли пароль
 forget_password=Забыли пароль?
@@ -159,7 +161,7 @@ confirmation_mail_sent_prompt=Новое письмо для подтвержд
 active_your_account=Активируйте свой аккаунт
 prohibit_login=Вход запрещен
 prohibit_login_desc=Вход для вашей учетной записи был запрещен, пожалуйста, свяжитесь с администратором сайта.
-resent_limit_prompt=Извините, вы уже запросили активацию по электронной почте недавно. Пожалуйста, подождите 3 минуты, а затем повторите попытку.
+resent_limit_prompt=Вы уже запрашивали активацию по электронной почте. Пожалуйста, подождите 3 минуты, а затем повторите попытку.
 has_unconfirmed_mail=Здравствуйте, %s! У вас есть неподтвержденный адрес электронной почты (<b>%s</b>). Если вам не приходило письмо с подтверждением или нужно выслать новое письмо, нажмите на кнопку ниже.
 resend_mail=Нажмите здесь, чтобы переотправить активационное письмо
 send_reset_mail=Нажмите сюда, чтобы отправить письмо для сброса пароля
@@ -221,7 +223,7 @@ url_error=` не является допустимым URL-адресом.`
 include_error=` должен содержать '%s'.`
 unknown_error=Неизвестная ошибка:
 captcha_incorrect=Капча не пройдена.
-password_not_match=Пароли не совпадают.
+password_not_match=Пароль и подтверждение отличаются.
 
 username_been_taken=Имя пользователя занято.
 repo_name_been_taken=Имя репозитория занято.
@@ -229,6 +231,7 @@ org_name_been_taken=Название организации занято.
 team_name_been_taken=Название команды занято.
 email_been_used=Адрес электронной почты уже используется.
 username_password_incorrect=Имя пользователя или пароль не правильный.
+auth_source_mismatch=Выбранный источник проверки подлинности не связан с пользователем.
 enterred_invalid_repo_name=Пожалуйста, убедитесь, что введено правильное имя репозитория.
 enterred_invalid_owner_name=Убедитесь, что введенное имя владельца верное.
 enterred_invalid_password=Убедитесь, что введенный пароль верен.
@@ -348,6 +351,7 @@ two_factor_or_enter_secret=Или введите кодовое слово:
 two_factor_then_enter_passcode=Затем введите пароль:
 two_factor_verify=Проверить
 two_factor_invalid_passcode=Введенные пароли не совпадают; пожалуйста, повторите попытку!
+two_factor_reused_passcode=Введенный вами пароль уже используется, пожалуйста, попробуйте другой!
 two_factor_enable_error=Ошибка активация двухфакторной аутентификации: %v
 two_factor_enable_success=Двухфакторная аутентификация активирована для вашей учетной записи!
 two_factor_recovery_codes_title=Коды восстановления для двухфакторная аутентификации
@@ -417,6 +421,8 @@ mirror_last_synced=Последняя синхронизация
 watchers=Наблюдатели
 stargazers=Звездочеты
 forks=Ответвления
+repo_description_helper=Описание репозитория. Максимальная длина 512 символов.
+repo_description_length=Доступные символы
 
 form.reach_limit_of_creation=У владельца достигнут максимальный предел в %d создаваемых репозиториев.
 form.name_reserved=Имя репозитория  '%s'  зарезервировано.
@@ -458,7 +464,7 @@ tree=Дерево
 filter_branch_and_tag=Фильтр по ветке или тегу
 branches=Ветки
 tags=Метки
-issues=Обсуждения
+issues=Задачи
 pulls=Запросы на слияние
 labels=Метки
 milestones=Этапы
@@ -476,7 +482,7 @@ branches.overview=Обзор
 branches.active_branches=Активные ветки
 branches.stale_branches=Устаревшие ветки
 branches.all=Все ветки
-branches.updated_by=Обновлено %[1]s %[2]s
+branches.updated_by=Обновлено %[1]s пользователем %[2]s
 branches.change_default_branch=Change Default Branch
 
 editor.new_file=Новый файл
@@ -514,6 +520,7 @@ editor.file_changed_while_editing=Содержимое файла изменил
 editor.file_already_exists=Файл с именем «%s» уже существует в этом репозитории.
 editor.no_changes_to_show=Нет изменений.
 editor.fail_to_update_file=Не удалось обновить/создать файл «%s» из-за ошибки: %v
+editor.fail_to_delete_file=Не удалось удалить файл «%s» из-за ошибки: %v
 editor.add_subdir=Добавьте подкаталог...
 editor.unable_to_upload_files=Не удалось загрузить файлы в «%s» из-за ошибки: %v
 editor.upload_files_to_dir=Загрузить файлы '%s'
@@ -531,7 +538,7 @@ commits.newer=Новее
 issues.new=Новая задача
 issues.new.labels=Метки
 issues.new.no_label=Нет меток
-issues.new.clear_labels=Отчистить метки
+issues.new.clear_labels=Очистить метки
 issues.new.milestone=Этап
 issues.new.no_milestone=Нет этапа
 issues.new.clear_milestone=Очистить этап
@@ -616,6 +623,7 @@ pulls.compare_compare=сравнить
 pulls.filter_branch=Фильтр по ветке
 pulls.no_results=Результатов не найдено.
 pulls.nothing_to_compare=Нечего сравнивать, родительская и текущая ветка одинаковые.
+pulls.nothing_merge_base=Нечего сравнивать, так так история обеих веток полностью отличается.
 pulls.has_pull_request=`Уже существует запрос на слияние между двумя целями: <a href="%[1]s/pulls/%[3]d">%[2]s#%[3]d</a>`
 pulls.create=Создать запрос на слияние
 pulls.title_desc=хочет смерджить %[1]d коммит(ов) из <code>%[2]s</code> в <code>%[3]s</code>
@@ -631,6 +639,9 @@ pulls.is_checking=Продолжается проверка конфликтов
 pulls.can_auto_merge_desc=Этот запрос на слияние может быть объединён автоматически.
 pulls.cannot_auto_merge_desc=Этот запрос на слияние не может быть объединён автоматически.
 pulls.cannot_auto_merge_helper=Пожалуйста, совершите слияние вручную для урегулирования конфликтов.
+pulls.create_merge_commit=Создать коммит на слияние
+pulls.rebase_before_merging=Выполнить rebase перед слиянием
+pulls.commit_description=Описание коммита
 pulls.merge_pull_request=Слить пулл-реквест
 pulls.open_unmerged_pull_exists=`Вы не можете снова открыть, поскольку уже существует запрос на слияние (#%d) из того же репозитория с той же информацией о слиянии и ожидающий слияния. `
 pulls.delete_branch=Удалить ветку
@@ -735,7 +746,9 @@ settings.tracker_issue_style=Стиль Именования Внешней Си
 settings.tracker_issue_style.numeric=Цифровой
 settings.tracker_issue_style.alphanumeric=Буквенноцифровой
 settings.tracker_url_format_desc=Вы можете использовать шаблон <code>{user} {repo} {index}</code> для имени пользователя, репозитория и номера задачи.
-settings.pulls_desc=Включить публичные запросы на слияние
+settings.pulls_desc=Разрешить пул-запросы для принятия изменений между репозиториями и ветками
+settings.pulls.ignore_whitespace=Игнорировать изменения в пробельных символах
+settings.pulls.allow_rebase_merge=Разрешить rebase-слияние
 settings.danger_zone=Опасная зона
 settings.cannot_fork_to_same_owner=Вы не можете ответвить репозиторий его же владельцу.
 settings.new_owner_has_same_repo=У нового владельца уже есть хранилище с таким названием.
@@ -756,7 +769,7 @@ settings.wiki_deletion_success=Данные Вики успешно стерты
 settings.delete=Удалить этот репозиторий
 settings.delete_desc=Будьте внимательны! Как только вы удалите репозиторий — пути назад не будет.
 settings.delete_notices_1=- Эта операция <strong>НЕ МОЖЕТ</strong> быть отменена.
-settings.delete_notices_2=- Эта операция навсегда удалит всё из этого репозитория, включая данные Git, связанные с ним задачи, комментарии и права доступа для сотрудников.
+settings.delete_notices_2=- Эта операция удалит все в этом репозитории, включая данные Git, задачи, комментарии и доступы для соавторов.
 settings.delete_notices_fork_1=- Все отвлетвления станут независимыми после удаления.
 settings.deletion_success=Репозиторий был успешно удалён!
 settings.update_settings_success=Настройки репозитория обновлены успешно.
@@ -812,12 +825,12 @@ settings.event_fork=Ответвить
 settings.event_fork_desc=Репозиторий склонирован
 settings.event_push=Push
 settings.event_push_desc=Push в репозиторий
-settings.event_issues=Вопросы
+settings.event_issues=Задачи
 settings.event_issues_desc=Задача изменена
-settings.event_issue_comment=Комментарии в задаче
-settings.event_issue_comment_desc=Комментарий создан, изменен или удален.
 settings.event_pull_request=Запросы на слияние
 settings.event_pull_request_desc=Запрос слияния открыт, закрыт, переоткрыт, изменён, назначен, снят, метка обновлена, метка убрана, добавлен промежуточный этап, убран промежуточный этап или синхронизирован.
+settings.event_issue_comment=Комментарии в задаче
+settings.event_issue_comment_desc=Комментарий создан, изменен или удален.
 settings.event_release=Релиз
 settings.event_release_desc=Релиз опубликован в репозитории.
 settings.active=Активен
@@ -830,11 +843,12 @@ settings.recent_deliveries=Недавние рассылки
 settings.hook_type=Тип перехватчика
 settings.add_slack_hook_desc=Добавить интеграцию с <a href="%s">Slack</a> в ваш репозиторий.
 settings.add_discord_hook_desc=Добавить интеграцию с <a href="%s">Discord</a> в ваш репозиторий.
+settings.add_dingtalk_hook_desc=Добавить интеграцию с <a href="%s">Dingtalk</a> в ваш репозиторий.
 settings.slack_token=Token
 settings.slack_domain=Домен
 settings.slack_channel=Канал
 settings.deploy_keys=Ключи развертывания
-settings.deploy_keys_helper=<b>Common Gotcha!</b> Если вы ищите куда добавить персональные публичные ключи, добавьте их в <a href="%s%s">настройках вашего аккаунта</a>.
+settings.deploy_keys_helper=<b>Подсказка:</b> если вы хотите добавить личные публичные ключи, сделайте это в <a href="%s%s">настройках вашего аккаунта</a>.
 settings.add_deploy_key=Добавить ключ развертывания
 settings.deploy_key_desc=Ключи развёртывания доступны только для чтения. Это не то же самое что и SSH-ключи аккаунта.
 settings.no_deploy_keys=Вы не добавляли ключи развертывания.
@@ -846,6 +860,8 @@ settings.add_key_success=Новый ключ развертывания '%s' у
 settings.deploy_key_deletion=Удалить ключ развертывания
 settings.deploy_key_deletion_desc=Удаление ключа развертывания приведет к удалению всех связанных прав доступа к репозиторию. Вы хотите продолжить?
 settings.deploy_key_deletion_success=Ключ развертывания успешно удален!
+settings.description_desc=Описание репозитория. Максимальная длина 512 символов.
+settings.description_length=Доступные символы
 
 diff.browse_source=Просмотр исходного кода
 diff.parent=Родитель
@@ -902,7 +918,7 @@ invite_someone=Пригласить кого-нибудь
 teams=Команды
 lower_members=Участники
 lower_repositories=Репозитории
-create_new_team=Создать Новую Команду
+create_new_team=Создать новую команду
 org_desc=Описание
 team_name=Название команды
 team_desc=Описание
@@ -1009,7 +1025,7 @@ dashboard.reinit_missing_repos=Реинициализировать все ре
 dashboard.reinit_missing_repos_success=Все репозитории с утерянными Git файлами успешно реинициализированы.
 
 dashboard.server_uptime=Время непрерывной работы сервера
-dashboard.current_goroutine=Текущий Goroutines
+dashboard.current_goroutine=Текущих Goroutines
 dashboard.current_memory_usage=Текущее использование памяти
 dashboard.total_memory_allocated=Всего памяти выделено
 dashboard.memory_obtained=Памяти использовано
@@ -1081,11 +1097,12 @@ repos.stars=В избранном
 repos.issues=Задачи
 repos.size=Размер
 
-auths.auth_manage_panel=Панель управления аутнентификациями
+auths.auth_sources=Типы аутентификации
 auths.new=Добавить новый источник
 auths.name=Имя
 auths.type=Тип
 auths.enabled=Включено
+auths.default=По умолчанию
 auths.updated=Обновлено
 auths.auth_type=Тип аутентификации
 auths.auth_name=Имя аутентификации
@@ -1094,20 +1111,21 @@ auths.domain=Домен
 auths.host=Хост
 auths.port=Порт
 auths.bind_dn=Привязать DN
+auths.bind_dn_helper=Вы можете использовать '%s' для подстановки имени пользователя, например: DOM\%s
 auths.bind_password=Привязать пароль
 auths.bind_password_helper=Внимание: Этот пароль сохранен в небезопасном виде. Не используйте высоко-привилегированную учетную запись.
 auths.user_base=База для поиска пользователя
 auths.user_dn=DN пользователя
 auths.attribute_username=Атрибут username
 auths.attribute_username_placeholder=Оставьте пустым, чтобы использовать имя пользователя для регистрации.
-auths.attribute_name=First Name Attribute
+auths.attribute_name=Имя атрибута
 auths.attribute_surname=Фамилия аттрибута
 auths.attribute_mail=Электронная почта аттрибута
-auths.verify_group_membership=Verify group membership
-auths.group_search_base_dn=Group Search Base DN
-auths.group_filter=Group Filter
-auths.group_attribute_contain_user_list=Group Attribute Containing List of Users
-auths.user_attribute_listed_in_group=User Attribute Listed in Group
+auths.verify_group_membership=Верифицировать членство в группе
+auths.group_search_base_dn=Base DN для поиска группы
+auths.group_filter=Групповой фильтр
+auths.group_attribute_contain_user_list=Атрибут группы, содержащий список пользователей
+auths.user_attribute_listed_in_group=Пользовательский атрибут, перечисленный в группе
 auths.attributes_in_bind=Извлечение атрибутов в виде Bind DN
 auths.filter=Фильтр пользователя
 auths.admin_filter=Фильтр администратора
@@ -1121,9 +1139,9 @@ auths.enable_tls=Включение шифрования TLS
 auths.skip_tls_verify=Пропустить проверку TLS
 auths.pam_service_name=Имя службы PAM
 auths.enable_auto_register=Включить автоматическую регистрацию
-auths.tips=Советы
 auths.edit=Изменить параметры канала аутентификации
 auths.activated=Эта аутентификация активирована
+auths.default_auth=Эта аутентификация является источником входа по умолчанию
 auths.new_success=Новый канал аутентификации '%s' успешно создан.
 auths.update_success=Настройки канала аутентификации успешно сохранены.
 auths.update=Обновить параметры аутентификации
@@ -1134,6 +1152,7 @@ auths.still_in_used=Эта проверка подлинности до сих
 auths.deletion_success=Канал аутентификации успешно удален!
 auths.login_source_exist=Источник входа '%s' уже существует.
 
+config.not_set=(не задано)
 config.server_config=Конфигурация сервера
 config.app_name=Имя приложения
 config.app_ver=Версия приложения
@@ -1155,6 +1174,7 @@ config.ssh_domain=Домен
 config.ssh_port=Порт
 config.ssh_listen_port=Прослушиваемый порт
 config.ssh_root_path=Корневой путь
+config.ssh_rewrite_authorized_keys_at_start=Перезаписать authorized_keys при запуске
 config.ssh_key_test_path=Путь к тестовому ключу
 config.ssh_keygen_path=Путь к генератору ключей ('ssh-keygen')
 config.ssh_minimum_key_size_check=Минимальный размер ключа проверки
@@ -1170,6 +1190,9 @@ config.disable_http_git=Выключить HTTP Git
 config.enable_local_path_migration=Включить миграцию с локального пути
 config.commits_fetch_concurrency=Параллельность получения коммитов
 
+config.http_config=Конфигурация HTTP
+config.http_access_control_allow_origin=Содержимое заголовка Access Control Allow Origin
+
 config.db_config=Конфигурация базы данных
 config.db_type=Тип
 config.db_host=Хост
@@ -1191,15 +1214,15 @@ config.enable_captcha=Включить капчу
 config.active_code_lives=Время жизни кода для активации
 config.reset_password_code_lives=Время жизни кода сброса пароля
 
-config.webhook_config=Настройка автоматического обновления репозиции
+config.webhook_config=Конфигурация Webhook
 config.queue_length=Длина очереди
 config.deliver_timeout=Задержка доставки
-config.skip_tls_verify=Пропустить TLS проверка
+config.skip_tls_verify=Пропустить проверку TLS
 
 config.mailer_config=Настройки почты
 config.mailer_enabled=Включено
 config.mailer_disable_helo=Отключить HELO
-config.mailer_name=Имя
+config.mailer_subject_prefix=Префикс темы письма
 config.mailer_host=Сервер
 config.mailer_user=Пользователь
 config.send_test_mail=Отправить тестовое письмо
@@ -1236,9 +1259,9 @@ config.git_max_diff_line_characters=Максимальное количеств
 config.git_max_diff_files=Максимальное количество Diff-файлов (при показе)
 config.git_gc_args=Аргументы GC
 config.git_migrate_timeout=Тайм-аут миграции
-config.git_mirror_timeout=Время Ожидания Обновления Зеркала
-config.git_clone_timeout=Время Ожидания Операции Клонирования
-config.git_pull_timeout=Время Ожидания Операции Извлечения
+config.git_mirror_timeout=Время ожидания обновления зеркала
+config.git_clone_timeout=Время ожидания операции клонирования
+config.git_pull_timeout=Время ожидания операции извлечения
 config.git_gc_timeout=Время Ожидания Операции Сборки Мусора
 
 config.log_config=Конфигурация журнала
@@ -1272,7 +1295,6 @@ notices.delete_success=Системное уведомление успешно
 
 [action]
 create_repo=создал(а) репозиторий <a href="%s"> %s</a>
-fork_repo=склонировать репозиторий в <a href="%s">%s</a>
 rename_repo=переименовал(а) репозиторий из <code>%[1]s</code> на <a href="%[2]s">%[3]s</a>
 commit_repo=запушил(а) <a href="%[1]s/src/%[2]s">%[3]s</a> в <a href="%[1]s">%[4]s</a>
 compare_commits=Просмотр сравнение для этих %d коммитов
@@ -1285,29 +1307,33 @@ create_pull_request=`создал запрос на слияние <a href="%s/p
 close_pull_request=`закрыл запрос на слияние <a href="%s/pulls/%s">%s#%[2]s</a>`
 reopen_pull_request=`открыл снова запрос на слияние <a href="%s/pulls/%s">%s#%[2]s</a>`
 merge_pull_request=`слил пул реквест <a href="%s/pulls/%s">%s#%[2]s</a>`
-create_branch=создать новую ветку <a href="%[1]s/src/%[2]s">%[3]s</a> at <a href="%[1]s">%[4]s</a>
-delete_branch=удален бранч <code>%[2]s</code> at <a href="%[1]s">%[3]s</a>
+create_branch=создал новую ветку <a href="%[1]s/src/%[2]s">%[3]s</a> в <a href="%[1]s">%[4]s</a>
+delete_branch=удалил ветку <code>%[2]s</code> в <a href="%[1]s">%[3]s</a>
 push_tag=запушил(а) метку <a href="%s/src/%s">%[2]s</a> в <a href="%[1]s">%[3]s</a>
 delete_tag=удален тег <code>%[2]s</code> at <a href="%[1]s">%[3]s</a>
+fork_repo=склонировать репозиторий в <a href="%s">%s</a>
+mirror_sync_push=синхронизированные коммиты с <a href="%[1]s/src/%[2]s">%[3]s</a> на <a href="%[1]s">%[4]s</a> из зеркала
+mirror_sync_create=синхронизированные новые ссылки <a href="%s/src/%s">%[2]s</a> к <a href="%[1]s">%[3]s</a> из зеркала
+mirror_sync_delete=синхронизированные и удаленные ссылки <code>%[2]s</code> на <a href="%[1]s">%[3]s</a> из зеркала
 
 [tool]
 ago=назад
 from_now=с этого момента
 now=сейчас
 1s=1 секунду %s
-1m=1 минута %s
+1m=1 минуту %s
 1h=1 час %s
 1d=1 день %s
 1w=1 неделя %s
 1mon=1 месяц %s
 1y=1 год %s
-seconds=секунд %[2]s: %[1]d
-minutes=минут %[2]s: %[1]d
+seconds=%d секунд %s
+minutes=%d минут %s
 hours=%d часов %s
-days=дней %[2]s: %[1]d
-weeks=недель %[2]s: %[1]d
-months=месяцев %[2]s: %[1]d
-years=лет %[2]s: %[1]d
+days=%d дней %s 
+weeks=%d недель %s
+months=%d месяцев %s
+years=%d лет %s
 raw_seconds=секунд
 raw_minutes=минут
 

conf/locale/locale_sr-SP.ini

@@ -4,7 +4,7 @@ home=Почетна
 dashboard=Контролни панел
 explore=Преглед
 help=Помоћ
-sign_in=Пријавите Се
+sign_in=Пријавите се
 sign_out=Одјава
 sign_up=Регистрација
 register=Регистрација
@@ -51,10 +51,10 @@ docker_helper=Ако покрећете Gogs унутар Docker, молимо
 requite_db_desc=Gogs захтева MySQL, PostgreSQL, SQLite3, MSSQL или TiDB.
 db_title=Подешавања базе
 db_type=Тип базе података
-host=Хост
+host=Домаћин
 user=Корисник
 password=Лозинка
-db_name=Име базе података
+db_name=Назив базе података
 db_helper=За MySQL користите тип табела InnoDB са кодирањем utf8_general_ci.
 ssl_mode=Режим SSL
 path=Пут
@@ -151,6 +151,8 @@ register_hepler_msg=Већ имате налог? Пријавите се!
 social_register_hepler_msg=Већ имате налог? Повежите се преко социалне мреже!
 disable_register_prompt=Извините регистрација је онемогућено. Молимо вас, контактирајте администратора.
 disable_register_mail=Извините, потврда путем поште је онемогућено.
+auth_source=Извор аутентикације
+local=Локално
 remember_me=Запамти ме
 forgot_password=Заборављена лозинка
 forget_password=Заборавили сте лозинку?
@@ -196,7 +198,7 @@ Email=Адреса ел. поште
 Password=Лозинка
 Retype=Поновите лозинку
 SSHTitle=Име SSH кључа
-HttpsUrl=HTTPS URL адреса
+HttpsUrl=HTTPS URL
 PayloadUrl=URL адреса за слање
 TeamName=Име тима
 AuthName=Ауторизацијско име
@@ -229,6 +231,7 @@ org_name_been_taken=Име организације је већ заузето.
 team_name_been_taken=Име екипе је већ заузето.
 email_been_used=Адреса е-поште се већ користи.
 username_password_incorrect=Корисничко име или лозинка није исправна.
+auth_source_mismatch=Изабрани извор потврде идентитета није повезан са корисником.
 enterred_invalid_repo_name=Молимо вас, проверите да је име спремишта тачно унешено.
 enterred_invalid_owner_name=Молимо вас проверите да сте добро унели име власника.
 enterred_invalid_password=Молимо вас проверите да сте добро унели лозинку.
@@ -268,12 +271,12 @@ security=Безбедност
 repos=Спремишта
 orgs=Организације
 applications=Апликације
-delete=Уклоните налог
+delete=Уклоните Hалог
 
 public_profile=Јавни профил
 profile_desc=Ваша адреса е-поште је јавна и коришће се за све обавести везане са налогом, као и друге операције почињене кроз Gogs.
 password_username_disabled=Нелокални корисници не могу да промене своје кориничко име.
-full_name=Име и презиме
+full_name=Пуно Име
 website=Веб страница
 location=Локација
 update_profile=Ажурирај профил
@@ -300,7 +303,7 @@ password_incorrect=Тренутна лозинка је нетачна.
 change_password_success=Лозинка је успешно промењена. Можете се пријавити са новом лозинком.
 password_change_disabled=Нелокални корисници не могу да промене своје лозинке.
 
-emails=Адреса ел. поште
+emails=Адреса е-поште
 manage_emails=Управљање адресама е-поште
 email_desc=Ваша главна адреса ће се користити за обавештења и других операција.
 primary=Главно
@@ -348,6 +351,7 @@ two_factor_or_enter_secret=Или унесите тајну шифру:
 two_factor_then_enter_passcode=Па унесите шифру:
 two_factor_verify=Проверити
 two_factor_invalid_passcode=Шифрa коју сте унели није важећа, молим бас пробајте поново!
+two_factor_reused_passcode=Љифром који сте унијели се већ користи, молим те пробај опет!
 two_factor_enable_error=Активација двоструке аутентификације није успела: %v
 two_factor_enable_success=Двострука аутентификација је успешно активирана за ваш налог!
 two_factor_recovery_codes_title=Шифра за опоравак за двоструку аутентификацију
@@ -417,6 +421,8 @@ mirror_last_synced=Задње синхронизовано
 watchers=Посматрачи
 stargazers=Пратиоци
 forks=Огранци
+repo_description_helper=Опис спремишта. Максимум 512 карактера.
+repo_description_length=Доступни карактери
 
 form.reach_limit_of_creation=Власник има максимум број %d спремишта.
 form.name_reserved=Име спремишта '%s' је резервирано.
@@ -514,6 +520,7 @@ editor.file_changed_while_editing=Садржај датотеке је пром
 editor.file_already_exists=Датотека са именом '%s' већ постоји у овом спремишту.
 editor.no_changes_to_show=Нема никаквих промена.
 editor.fail_to_update_file=Промена над '%s' није успело са грешком: %v
+editor.fail_to_delete_file=Фајл '%s' није успешно обрисан, разлог грешке: %v
 editor.add_subdir=Додај поддиректоријуми...
 editor.unable_to_upload_files=Учитање датотеке '%s' није успело са грешкном: %v
 editor.upload_files_to_dir=Пошаљи датотеке на '%s'
@@ -521,7 +528,7 @@ editor.upload_files_to_dir=Пошаљи датотеке на '%s'
 commits.commit_history=Историја ревизија
 commits.commits=Комити
 commits.search=Претражи комите
-commits.find=Претражи
+commits.find=Пронађи
 commits.author=Аутор
 commits.message=Порука
 commits.date=Датум
@@ -616,6 +623,7 @@ pulls.compare_compare=упореди
 pulls.filter_branch=Филтер по грани
 pulls.no_results=Нема резултата.
 pulls.nothing_to_compare=Нема шта да се упореди, гране су исте.
+pulls.nothing_merge_base=Немогуће је упоредити јер двије гране имају потпуно другачију историју.
 pulls.has_pull_request=`Већ постоји захтев за спајање између ове две гране: <a href="%[1]s/pulls/%[3]d">%[2]s#%[3]d</a>`
 pulls.create=Поднеси захтев за спајање
 pulls.title_desc=жели да споји %[1]d комит(е) из <code>%[2]s</code> у <code>%[3]s</code>
@@ -631,6 +639,9 @@ pulls.is_checking=Провера још увек у току, молимо ва
 pulls.can_auto_merge_desc=Овај захтев за спајање може бити обављен аутоматски.
 pulls.cannot_auto_merge_desc=Овај захтев за спајање не може бити обављен аутоматски због сукоба.
 pulls.cannot_auto_merge_helper=Молимо вас, обавите спајање ручно да би сте разрешили сукобе.
+pulls.create_merge_commit=Направите спајање
+pulls.rebase_before_merging=Поврат пре обједињавања
+pulls.commit_description=Опис ревизије
 pulls.merge_pull_request=Обави спајање
 pulls.open_unmerged_pull_exists=`Неможете поново отворити јер већ постоји захтев за спајање (#%d) из истог спремишта са истим информацијама о спајању и чека спајање.`
 pulls.delete_branch=Избришите грану
@@ -693,21 +704,21 @@ settings.update=Ажурирање
 settings.update_default_branch_unsupported=Промена подразумеване гране није подржавана од стране Git верзија сервера.
 settings.update_default_branch_success=Подразумевана грана овог спремишта је била успешно ажурирана!
 settings.protected_branches=Заштићене гране
-settings.protected_branches_desc=Protect branches from force pushing, accidental deletion and whitelist code committers.
-settings.choose_a_branch=Choose a branch...
-settings.branch_protection=Branch Protection
-settings.branch_protection_desc=Please choose protect options for branch <b>%s</b>.
-settings.protect_this_branch=Protect this branch
-settings.protect_this_branch_desc=Disable force pushes and prevent from deletion.
-settings.protect_require_pull_request=Require pull request instead direct pushing
-settings.protect_require_pull_request_desc=Enable this option to disable direct pushing to this branch. Commits have to be pushed to another non-protected branch and merged to this branch through pull request.
-settings.protect_whitelist_committers=Whitelist who can push to this branch
-settings.protect_whitelist_committers_desc=Add people or teams to whitelist of direct push to this branch. Users in whitelist will bypass require pull request check.
-settings.protect_whitelist_users=Users who can push to this branch
-settings.protect_whitelist_search_users=Search users
-settings.protect_whitelist_teams=Teams for which members of them can push to this branch
-settings.protect_whitelist_search_teams=Search teams
-settings.update_protect_branch_success=Protect options for this branch has been updated successfully!
+settings.protected_branches_desc=Заштита гранe од додира, случајног брисања и команди листе кода.
+settings.choose_a_branch=Изаберите Филијалy...
+settings.branch_protection=Заштита Филијала
+settings.branch_protection_desc=Молимо изаберите заштитне опције за грану <b>%s</b>.
+settings.protect_this_branch=Заштити ову филијалy
+settings.protect_this_branch_desc=Онемогућите притисак и заштититy од брисања.
+settings.protect_require_pull_request=Захтев за повлачењем уместо директног додира
+settings.protect_require_pull_request_desc=Омогућите ову опцију да бисте спречили директан додир на ову грану. Обавезно мора бити покренуто у незаштићеној грани затим објединти на ову грану кao захтев за спајање.
+settings.protect_whitelist_committers=Whitelist који може да додирне ову грану
+settings.protect_whitelist_committers_desc=Додајте људе или тимовe у листу белих исправа за директан приступ овој теми. Корисници из беле листе ће заобићи захтев за повлачење захтева.
+settings.protect_whitelist_users=Корисници који могу да додирнy ову грану
+settings.protect_whitelist_search_users=Тражи кориснике
+settings.protect_whitelist_teams=Тимови кao и њихови чланови могу потакнути овy грану
+settings.protect_whitelist_search_teams=Тимови за претрагу
+settings.update_protect_branch_success=Заштитна опција за ову грану је успешно ажурирана!
 settings.hooks=Webhooks
 settings.githooks=Git хуки
 settings.basic_settings=Основна подешавања
@@ -720,24 +731,26 @@ settings.change_reponame_prompt=Ова промена ће утицати на
 settings.advanced_settings=Напредна подешавања
 settings.wiki_desc=Омогући систем вики
 settings.use_internal_wiki=Користи уграђен вики
-settings.allow_public_wiki_desc=Allow public access to wiki when repository is private
+settings.allow_public_wiki_desc=Дозволите приступ wiki када је трговина приватна
 settings.use_external_wiki=Користи спољни Вики
 settings.external_wiki_url=URL адреса спољног Вики
 settings.external_wiki_url_desc=Посетиоци ће бити преусмерени URL адреси након што кликну на картицу.
 settings.issues_desc=Омогући систем праћења грешака
 settings.use_internal_issue_tracker=Користи уграђен систем праћења грешака
-settings.allow_public_issues_desc=Allow public access to issues when repository is private
+settings.allow_public_issues_desc=Дозволите приступ проблемима када је трговина приватна
 settings.use_external_issue_tracker=Користи спољни систем праћења грешака
-settings.external_tracker_url=External Issue Tracker URL
-settings.external_tracker_url_desc=Visitors will be redirected to URL when they click on the tab.
+settings.external_tracker_url=Екстерни проблем Tracker URL
+settings.external_tracker_url_desc=Посетиоци ће бити преусмерени на URL када кликну на картицу.
 settings.tracker_url_format=Спољни формат везе система за праћење грешака
 settings.tracker_issue_style=Стил именовања на спољном систему:
 settings.tracker_issue_style.numeric=Нумерично
 settings.tracker_issue_style.alphanumeric=Алфанумерично
 settings.tracker_url_format_desc=Можете да користите шаблон <code>{user} {repo} {index}</code> за корисничко име, спремишта и задатака.
-settings.pulls_desc=Омогући систем захтева за спајање да би сте преузели јавних доприноса
+settings.pulls_desc=Enable pull requests to accept contributions between repositories and branches
+settings.pulls.ignore_whitespace=Занемарите промене у размаку
+settings.pulls.allow_rebase_merge=Дозволи употребу поврата да обједините обавезе
 settings.danger_zone=Опасна зона
-settings.cannot_fork_to_same_owner=You cannot fork a repository to its original owner.
+settings.cannot_fork_to_same_owner=Не можете поделити спремиште власнику.
 settings.new_owner_has_same_repo=Нови власник већ има спремиште по истим називом. Молимо вас изаберите друго име.
 settings.convert=Претворити у обично спремиште
 settings.convert_desc=Можете претворити огледало у обично спремиште, али та операција не може се укинути.
@@ -756,7 +769,7 @@ settings.wiki_deletion_success=Вики подаци за ово спремиш
 settings.delete=Уклони ово спремиште
 settings.delete_desc=Нећете мочи повратити спремиште после брисања. Молимо вас, будите сигурни.
 settings.delete_notices_1=- Ова операција <strong>НЕЋЕ МОЧИ</strong> бити укинута.
-settings.delete_notices_2=- Ова операција ће трајно избрисати све из овог спремишта, укључујући и податке Git, задатци, коментаре и приступ сарадницима.
+settings.delete_notices_2=- Ова операција ће трајно избрисати све из овог спремишта, укључујући податке Git, задатке, коментаре и приступ сарадницима.
 settings.delete_notices_fork_1=- Сви огранци ће постати независни после уклањање.
 settings.deletion_success=Спремиште је успешно избрисано!
 settings.update_settings_success=Подешавања спремишта су успешно ажурирани.
@@ -781,7 +794,7 @@ settings.webhook.test_delivery=Провери испоруку
 settings.webhook.test_delivery_desc=Пошаљи push за тестирање подешавања webhook
 settings.webhook.test_delivery_success=Тест webhook је додат у месту испоруке. Процес може да потраје неколико секунди пре него што ће показати у историји испоруке.
 settings.webhook.redelivery=Redelivery
-settings.webhook.redelivery_success=Hook task '%s' has been readded to delivery queue. It may take few seconds to update delivery status in history.
+settings.webhook.redelivery_success=Hook задатак '%s' је прочитан редоследом испоруке. Може потрајати неколико секунди да ce ажурира статус испоруке у историји.
 settings.webhook.request=Захтев
 settings.webhook.response=Одговор
 settings.webhook.headers=Наслови
@@ -796,7 +809,7 @@ settings.add_webhook_desc=Послаћемо захтев <code>POST</code> на
 settings.payload_url=URL адреса за слање
 settings.content_type=Тип садржаја
 settings.secret=Тајна
-settings.secret_desc=Secret will be sent as SHA256 HMAC hex digest of payload via <code>X-Gogs-Signature</code> header.
+settings.secret_desc=Тајна ће бити послата као SHA256 HMAC hex digest корисног оптерећења преко <code>X-Gogs-Signature</code> заглавља.
 settings.slack_username=Корисничко име
 settings.slack_icon_url=URL адреса иконице
 settings.slack_color=Боја
@@ -806,18 +819,18 @@ settings.event_send_everything=У <strong>свим</strong> догађајима
 settings.event_choose=Изабраћу шта ми је потребно.
 settings.event_create=Креирај
 settings.event_create_desc=Створена грана или ознака
-settings.event_delete=Delete
-settings.event_delete_desc=Branch or tag deleted
-settings.event_fork=Fork
-settings.event_fork_desc=Repository forked
+settings.event_delete=Обриши
+settings.event_delete_desc=Oбрисана грана или ознака
+settings.event_fork=Креирај огранак
+settings.event_fork_desc=Спремиште је допуштено
 settings.event_push=Push
 settings.event_push_desc=Git push у спремиште
-settings.event_issues=Issues
-settings.event_issues_desc=Issue opened, closed, reopened, edited, assigned, unassigned, label updated, label cleared, milestoned, or demilestoned.
-settings.event_issue_comment=Коментар проблема
-settings.event_issue_comment_desc=Коментар проблема креиран, уређиван или избришен.
+settings.event_issues=Задаци
+settings.event_issues_desc=Проблем је отворен, затворен, поново отворен, уређен, додељен, не додељен, етикета је ажурирана, етикета је очишћена, помјерена или демилестирана.
 settings.event_pull_request=Захтев за спајање
 settings.event_pull_request_desc=Захтев за спајање отворенo, затворено, додељено, недодељенo, ознака ажурирана, ознака избрисана, створена прекретница, избрисана прекретница, или синхронизовано.
+settings.event_issue_comment=Коментар проблема
+settings.event_issue_comment_desc=Коментар проблема креиран, уређиван или избришен.
 settings.event_release=Издање
 settings.event_release_desc=Издање објављено на спремишту.
 settings.active=Активно
@@ -830,6 +843,7 @@ settings.recent_deliveries=Недавне испоруке
 settings.hook_type=Тип Hook-а
 settings.add_slack_hook_desc=Додавање интеграције <a href="%s">Slack</a> у спремиште.
 settings.add_discord_hook_desc=Додавати <a href="%s">Discord</a> интеграцију вашем спремишту.
+settings.add_dingtalk_hook_desc=Додајте интеграцију <a href="%s">Dingtalk</a> у своје спремиште.
 settings.slack_token=Токен
 settings.slack_domain=Домен
 settings.slack_channel=Канал
@@ -846,6 +860,8 @@ settings.add_key_success=Нови кључ распоређивање '%s' је
 settings.deploy_key_deletion=Уклони кључ распоређивањa
 settings.deploy_key_deletion_desc=Брисање овог кључа за распоређивање ће довести до укидање приступ на овом спремишту. Да ли желите да наставите?
 settings.deploy_key_deletion_success=Кључ за распоређивање је успешно обрисан!
+settings.description_desc=Опис спремишта. Максимум 512 карактера.
+settings.description_length=Доступни карактери
 
 diff.browse_source=Преглед изворни кода
 diff.parent=родитељ
@@ -1003,8 +1019,8 @@ dashboard.git_gc_repos=Изврши cакупљање смећа на спрем
 dashboard.git_gc_repos_success=Сва спремишта су успешно извршили cакупљање смећа.
 dashboard.resync_all_sshkeys=Препиши '.ssh/authorized_keys' (опрез: не Gogs тастери ће бити изгубљени)
 dashboard.resync_all_sshkeys_success=Сви јавни кључеви су успешно преписани.
-dashboard.resync_all_hooks=Resync pre-receive, update and post-receive hooks of all repositories
-dashboard.resync_all_hooks_success=All repositories' pre-receive, update and post-receive hooks have been resynced successfully.
+dashboard.resync_all_hooks=Поново синхронизујте купљенe pre-receive, ажурирањa и post-receive у свим репозиторијумима
+dashboard.resync_all_hooks_success=Све спремишта pre-receive, ажурирања и post-receive успешно су ресинкронизованa.
 dashboard.reinit_missing_repos=Поново постави све податке са изгубљеним Git датотекама
 dashboard.reinit_missing_repos_success=Сви подаци са изгубљеним Git датотекама су успешно поново постављени.
 
@@ -1079,13 +1095,14 @@ repos.private=Приватно
 repos.watches=Watches
 repos.stars=Фаворити
 repos.issues=Задаци
-repos.size=Size
+repos.size=Величина
 
-auths.auth_manage_panel=Контролна панела аутентикације
+auths.auth_sources=Извори аутентичности
 auths.new=Додај нови извор
 auths.name=Име
 auths.type=Тип
 auths.enabled=Омогућено
+auths.default=Default
 auths.updated=Ажурирано
 auths.auth_type=Врста провере аутентичности
 auths.auth_name=Име провере аутентичности
@@ -1094,20 +1111,21 @@ auths.domain=Домен
 auths.host=Хост
 auths.port=Порт
 auths.bind_dn=Bind DN
+auths.bind_dn_helper=Можете користити „%s” као место за корисничко име, e.g. DOM\%s
 auths.bind_password=Bind лозинкa
 auths.bind_password_helper=Упозорење: Ова лозинка је сачувана у облику нешифрованом текцту. Не користите високо-привилеговану налог.
 auths.user_base=База претраживање корисника
 auths.user_dn=DN корисника
 auths.attribute_username=Атрибут username
 auths.attribute_username_placeholder=Оставите празно да бисте користили корисничко име за регистрацију.
-auths.attribute_name=First Name Attribute
+auths.attribute_name=Првo име атрибута
 auths.attribute_surname=Презиме атрибута
 auths.attribute_mail=Е-маил адреса
-auths.verify_group_membership=Verify group membership
-auths.group_search_base_dn=Group Search Base DN
-auths.group_filter=Group Filter
-auths.group_attribute_contain_user_list=Group Attribute Containing List of Users
-auths.user_attribute_listed_in_group=User Attribute Listed in Group
+auths.verify_group_membership=Потврдите чланство у групи
+auths.group_search_base_dn=База DN за претраживање групе
+auths.group_filter=Филтер групе
+auths.group_attribute_contain_user_list=Група атрибута која садржи листу корисника
+auths.user_attribute_listed_in_group=Атрибут прилагођен и наведен у групи
 auths.attributes_in_bind=Екстракција атрибута у облику Bind DN
 auths.filter=Филтер корисника
 auths.admin_filter=Филтер администратора
@@ -1121,9 +1139,9 @@ auths.enable_tls=Омогући TLS шифровање
 auths.skip_tls_verify=Прескочи TLS проверу
 auths.pam_service_name=Назив PAM сервиса
 auths.enable_auto_register=Омогући аутоматску регистрацију
-auths.tips=Савети
 auths.edit=Промените подешавања канала аутентикације
 auths.activated=Овај канал аутентикације је активан
+auths.default_auth=This authentication is default login source
 auths.new_success=Нови канал аутентикације '%s' је успешно креиран.
 auths.update_success=Подешавања канала аутентикације су успешно ажурирана.
 auths.update=Ажурирај подешавања аутентикације
@@ -1132,8 +1150,9 @@ auths.delete_auth_title=Брисање канала аутентикације
 auths.delete_auth_desc=Овај канал аутентикације ће бити избрисан. Да ли желите да наставите?
 auths.still_in_used=Овај канал аутентикације још увек се користи од стране неких корисника, уклоните или пребаци ове кориснике у друг врсту аутентикације.
 auths.deletion_success=Канал аутентикације успешно избрисан!
-auths.login_source_exist=Login source '%s' already exists.
+auths.login_source_exist=Улазни извор '%s' већ постоји.
 
+config.not_set=(није подешено)
 config.server_config=Конфигурација сервера
 config.app_name=Име апликације
 config.app_ver=Верзија апликације
@@ -1155,20 +1174,24 @@ config.ssh_domain=Домен
 config.ssh_port=Порт
 config.ssh_listen_port=Порт за слушање
 config.ssh_root_path=Основни пут
+config.ssh_rewrite_authorized_keys_at_start=Переписати authorized_keys на почeтку
 config.ssh_key_test_path=Пут до кључу
 config.ssh_keygen_path=Пут до генератор кључева ('ssh-keygen')
 config.ssh_minimum_key_size_check=Минимална величина провера кључа
 config.ssh_minimum_key_sizes=Минимална величина кључева
 
-config.repo_config=Repository Configuration
+config.repo_config=Конфигурација спремишта
 config.repo_root_path=Пут до корена спремишта
 config.script_type=Врста скрипта
 config.repo_force_private=Force Private
-config.max_creation_limit=Max Creation Limit
-config.preferred_licenses=Preferred Licenses
-config.disable_http_git=Disable HTTP Git
-config.enable_local_path_migration=Enable Local Path Migration
-config.commits_fetch_concurrency=Commits Fetch Concurrency
+config.max_creation_limit=Ограничење максималне креације
+config.preferred_licenses=Преференцијалне лиценце
+config.disable_http_git=Онемогући HTTP Git
+config.enable_local_path_migration=Омогући миграцију локалнe путањe
+config.commits_fetch_concurrency=Предузеће Fetch Concurrency
+
+config.http_config=HTTP Конфигурација
+config.http_access_control_allow_origin=Контрола приступа дозвољава порекло
 
 config.db_config=Конфигурација базе података
 config.db_type=Тип
@@ -1199,7 +1222,7 @@ config.skip_tls_verify=Прескочи TLS проверу
 config.mailer_config=Подешавања поште
 config.mailer_enabled=Омогућено
 config.mailer_disable_helo=Онемогући HELO
-config.mailer_name=Име
+config.mailer_subject_prefix=Префикс Предмета
 config.mailer_host=Хост
 config.mailer_user=Корисник
 config.send_test_mail=Пошаљи тест поруку
@@ -1242,8 +1265,8 @@ config.git_pull_timeout=Време до отказивања pull операци
 config.git_gc_timeout=Време до отказивања cакупљање смећа
 
 config.log_config=Kонфигурација журнала
-config.log_mode=Mode
-config.log_options=Options
+config.log_mode=Режим
+config.log_options=Опције
 
 monitor.cron=Cron задаци
 monitor.name=Име
@@ -1272,7 +1295,6 @@ notices.delete_success=Системска обавештавања су успе
 
 [action]
 create_repo=креира спремиште <a href="%s">%s</a>
-fork_repo=forked a repository to <a href="%s">%s</a>
 rename_repo=преимензје спремиште од <code>%[1]s</code> на <a href="%[2]s">%[3]s</a>
 commit_repo=извршује push на <a href="%[1]s/src/%[2]s">%[3]s</a> у <a href="%[1]s">%[4]s</a>
 compare_commits=Поређење ових %d комита
@@ -1285,10 +1307,14 @@ create_pull_request=`шаље захтев за спајање <a href="%s/pulls
 close_pull_request=`затвара захтев за спајање <a href="%s/pulls/%s">%s#%[2]s</a>`
 reopen_pull_request=`поново отвара захтев за спајање <a href="%s/pulls/%s">%s#%[2]s</a>`
 merge_pull_request=`прихваћује захтев за спајање <a href="%s/pulls/%s">%s#%[2]s</a>`
-create_branch=created new branch <a href="%[1]s/src/%[2]s">%[3]s</a> at <a href="%[1]s">%[4]s</a>
-delete_branch=deleted branch <code>%[2]s</code> at <a href="%[1]s">%[3]s</a>
+create_branch=створи нову филијалy <a href="%[1]s/src/%[2]s">%[3]s</a> at <a href="%[1]s">%[4]s</a>
+delete_branch=избрисана филијалa <code>%[2]s</code> at <a href="%[1]s">%[3]s</a>
 push_tag=извршује push са ознаком <a href="%s/src/%s">%[2]s</a> на <a href="%[1]s">%[3]s</a>
-delete_tag=deleted tag <code>%[2]s</code> at <a href="%[1]s">%[3]s</a>
+delete_tag=избрисана ознака <code>%[2]s</code> at <a href="%[1]s">%[3]s</a>
+fork_repo=отворио спремиште <a href="%s">%s</a>
+mirror_sync_push=синхронизује се <a href="%[1]s/src/%[2]s">%[3]s</a> у <a href="%[1]s">%[4]s</a> из огледала
+mirror_sync_create=синхронизована нова референца <a href="%s/src/%s">%[2]s</a> y <a href="%[1]s">%[3]s</a> из огледала
+mirror_sync_delete=синхронизоване и избрисане референце <code>%[2]s</code> y <a href="%[1]s">%[3]s</a> из огледала
 
 [tool]
 ago=пре

conf/locale/locale_sv-SE.ini

@@ -48,7 +48,7 @@ cancel=Avbryt
 install=Installation
 title=Steg för att installera för första gången
 docker_helper=Om du kör Gogs inuti Docker, vänligen läs <a target="_blank" href="%s">Riktninjerna</a> nogrant innan du ändrar någonting på denna sida!
-requite_db_desc=Gogs requires MySQL, PostgreSQL, SQLite3, MSSQL or TiDB.
+requite_db_desc=Gogs kräver MySQL, PostgreSQL, SQLite3, MSSQL eller TiDB.
 db_title=Databasinställningar
 db_type=Databastyp
 host=Server
@@ -58,8 +58,8 @@ db_name=Databasens namn
 db_helper=Se till att i MySQL använda INNODB med teckenuppsättningen utf8_general_ci.
 ssl_mode=SSL-läge
 path=Filväg
-sqlite_helper=The file path of SQLite3 database. <br>Please use absolute path when you start as service.
-err_empty_db_path=SQLite3 database path cannot be empty.
+sqlite_helper=Sökvägen för SQLite3 databas. <br>Vänligen använd den absoluta sökvägen när du kör som en tjänst.
+err_empty_db_path=Sökvägen till SQLite3 databasen får inte vara tom.
 no_admin_and_disable_registration=Du kan inte inaktivera registrering utan att skapa ett administratörskonto.
 err_empty_admin_password=Administratörslösenordet får ej vara tomt.
 
@@ -74,7 +74,7 @@ domain=Domän
 domain_helper=Detta påverkar SSH klonings webbadresser.
 ssh_port=SSH-port
 ssh_port_helper=Portnumret som din SSH-server brukar, lämna tomt för att inaktivera SSH-funktionaliteten.
-use_builtin_ssh_server=Use Builtin SSH Server
+use_builtin_ssh_server=Använd inbyggd SSH Server
 use_builtin_ssh_server_popup=Start builtin SSH server for Git operations to distinguish from system SSH daemon.
 http_port=HTTP Port
 http_port_helper=Portnumret vilket applikationen kommer lyssnar på.
@@ -82,8 +82,8 @@ app_url=Applikationsadressen
 app_url_helper=Detta påverkar HTTP/HTTPS kloningsadressen och på platser i e-post.
 log_root_path=Loggsökväg
 log_root_path_helper=Katalog till vilken loggfiler skrivs.
-enable_console_mode=Enable Console Mode
-enable_console_mode_popup=In addition to file mode, also print logs to console.
+enable_console_mode=Aktivera Konsolläge
+enable_console_mode_popup=Utöver fil-läge, skriver även ut loggar till konsol.
 
 optional_title=Övriga inställningar
 email_title=E-post tjänstens inställningar
@@ -119,8 +119,8 @@ sqlite3_not_available=Din release stödjer ej SQLite3, ladda vänligen ner den o
 invalid_db_setting=Databas inställningen är inkorrekt: %v
 invalid_repo_path=Utvecklingskatalogens rotsökväg är ogiltig: %v
 run_user_not_match=Köranvändaren är inte aktuell användare: %s -> %s
-smtp_host_missing_port=SMTP Host is missing port in address.
-invalid_smtp_from=SMTP From field is not valid: %v
+smtp_host_missing_port=SMTP-värden saknar port i adressen.
+invalid_smtp_from=SMTP från fält är inte giltigt: %v
 save_config_failed=Konfigurationssparningen misslyckades: %v
 invalid_admin_setting=Inställningarna för administratörskontot är felaktiga: %v
 install_success=Välkommen! Vi är glada att du väljer Gogs, ha kul och ta hand om dig.
@@ -151,6 +151,8 @@ register_hepler_msg=Har du redan ett konto? Logga in nu!
 social_register_hepler_msg=Har du redan ett konto? Anslut det nu!
 disable_register_prompt=Tyvärr är användarregistreringen inaktiverad. Vänligen kontakta din administratör.
 disable_register_mail=Tyvärr så är registreringsbekräftelemailutskick inaktiverat.
+auth_source=Authentication Source
+local=Lokal
 remember_me=Kom ihåg mig
 forgot_password=Glömt lösenord
 forget_password=Glömt lösenordet?
@@ -169,13 +171,13 @@ reset_password_helper=Klicka här för att återställa ditt lösenord
 password_too_short=Lösenordet får ej vara kortare än 6 tecken.
 non_local_account=Icke-lokala konton får inte ändra lösenord genom Gogs.
 
-login_two_factor=Two-factor Authentication
-login_two_factor_passcode=Authentication Passcode
-login_two_factor_enter_recovery_code=Enter a two-factor recovery code
-login_two_factor_recovery=Two-factor Recovery
-login_two_factor_recovery_code=Recovery Code
-login_two_factor_enter_passcode=Enter a two-factor passcode
-login_two_factor_invalid_recovery_code=Recovery code has been used or does not valid.
+login_two_factor=Tvåfaktorsautentisering
+login_two_factor_passcode=Autentiseringskod
+login_two_factor_enter_recovery_code=Ange en tvåfaktorsautentisering återställningskod
+login_two_factor_recovery=Tvåfaktorsautentisering Återställning
+login_two_factor_recovery_code=Återställningskod
+login_two_factor_enter_passcode=Ange en tvåfaktorsautentiserings kod
+login_two_factor_invalid_recovery_code=Återställningskoden har använts eller är inte giltig.
 
 [mail]
 activate_account=Vänligen aktivera ditt konto
@@ -212,7 +214,7 @@ Content=Innehåll
 require_error=får inte vara tomt
 alpha_dash_error=` får bara innehålla bokstäver, nummer och bindestreck (-_).`
 alpha_dash_dot_error=` får bara innehålla bokstäver, nummer, bindestreck (-_) och punkt`
-alpha_dash_dot_slash_error=` must be valid alpha or numeric or dash(-_) or dot characters or slashes.`
+alpha_dash_dot_slash_error=` får bara innehålla bokstäver, nummer, bindestreck (-_), punkt eller snedstreck`
 size_error=` måste vara av storleken %s`
 min_size_error=` måste innehålla minst %s tecken.`
 max_size_error=` får inte innehålla mer än %s tecken.`
@@ -229,6 +231,7 @@ org_name_been_taken=Organisationsnamnet har redan används.
 team_name_been_taken=Team namn är redan använt.
 email_been_used=E-postadressen har redan använts.
 username_password_incorrect=Användarnamnet eller lösenordet är inte korrekt.
+auth_source_mismatch=The authentication source selected is not associated with the user.
 enterred_invalid_repo_name=Se till att utvecklingskatalogen som du angav är rätt.
 enterred_invalid_owner_name=Kontrollera att ägarnamnet som du angav är rätt.
 enterred_invalid_password=Se till att den som lösenord du angett är rätt.
@@ -264,8 +267,8 @@ profile=Profil
 password=Lösenord
 avatar=Avatar
 ssh_keys=SSH-nycklar
-security=Security
-repos=Repositories
+security=Säkerhet
+repos=Utvecklingskataloger
 orgs=Organisationer
 applications=Applikationer
 delete=Radera konto
@@ -334,20 +337,21 @@ no_activity=Ingen nylig aktivitet
 key_state_desc=Denna nyckel har använts inom dom senaste 7 dagarna
 token_state_desc=Denna token har används inom dom senaste 7 dagarna
 
-two_factor=Two-factor Authentication
+two_factor=Tvåfaktorsautentisering
 two_factor_status=Status:
-two_factor_on=On
-two_factor_off=Off
-two_factor_enable=Enable
-two_factor_disable=Disable
-two_factor_view_recovery_codes=View and save <a href="%s%s">your recovery codes</a> in a safe place. You can use them as passcode if you lose access to your authentication application.
+two_factor_on=På
+two_factor_off=Av
+two_factor_enable=Aktivera
+two_factor_disable=Inaktivera
+two_factor_view_recovery_codes=Visa och spara <a href="%s%s">dina återställningskoder</a> på ett säkert ställe. Du kan använda dem som kod om du förlorar åtkomsten till din autentisering applikation.
 two_factor_http=For HTTP/HTTPS operations, you are no longer able to use plain username and password. Please create and use <a href="%[1]s%[2]s">Personal Access Token</a> as your credential, e.g. <code>%[3]s</code>.
-two_factor_enable_title=Enable Two-factor Authentication
+two_factor_enable_title=Avaktivera Tvåfaktorsautentisering
 two_factor_scan_qr=Please use your authentication application to scan the image:
 two_factor_or_enter_secret=Or enter the secret:
-two_factor_then_enter_passcode=Then enter passcode:
-two_factor_verify=Verify
+two_factor_then_enter_passcode=Ange sedan lösenordet:
+two_factor_verify=Verifiera
 two_factor_invalid_passcode=The passcode you entered is not valid, please try again!
+two_factor_reused_passcode=The passcode you entered has already been used, please try another one!
 two_factor_enable_error=Enable Two-factor authentication failed: %v
 two_factor_enable_success=Two-factor authentication has enabled for your account successfully!
 two_factor_recovery_codes_title=Two-factor Authentication Recovery Codes
@@ -417,6 +421,8 @@ mirror_last_synced=Senast synkad
 watchers=Observerare
 stargazers=Stjärnmärkare
 forks=Forks
+repo_description_helper=Description of repository. Maximum 512 characters length.
+repo_description_length=Available characters
 
 form.reach_limit_of_creation=Ägaren har nått maxgränsen av %d skapade repon.
 form.name_reserved=Namnet '%s' på utvecklingskatalogen är reserverat.
@@ -514,6 +520,7 @@ editor.file_changed_while_editing=Filinnhållet har ändrats sedan du började r
 editor.file_already_exists=En fil med namnet '%s' finns redan i förrådet.
 editor.no_changes_to_show=Det finns inga ändringar att visa.
 editor.fail_to_update_file=Uppdateringen/skapandet av filen '%s' misslyckades med felet: %v
+editor.fail_to_delete_file=Failed to delete file '%s' with error: %v
 editor.add_subdir=Lägg till underkatalog...
 editor.unable_to_upload_files=Uppladdning av filen '%s' misslyckades med felet: %v
 editor.upload_files_to_dir=Ladda upp filer till '%s'
@@ -616,6 +623,7 @@ pulls.compare_compare=jämför
 pulls.filter_branch=Filtrera gren
 pulls.no_results=Inga resultat hittades.
 pulls.nothing_to_compare=Det finns inget att jämföra eftersom bas och huvudgrenar är lika.
+pulls.nothing_merge_base=There is nothing to compare because two branches have completely different history.
 pulls.has_pull_request=`Det finns redan en pullförfrågan mellan detta två mål: <a href="%[1]s/pulls/%[3]d">%[2]s#%[3]s</a>^
 pulls.create=Skapa Pullförfrågan
 pulls.title_desc=vill sammanfoga %[1]d incheckningar från <code>s[2]s</code> in i <code>%[3]s</code>
@@ -631,6 +639,9 @@ pulls.is_checking=Konfliktkontroll är fortfarande pågågående, vänligen uppd
 pulls.can_auto_merge_desc=Denna pull-förfrågan kan sammanfogas automatiskt.
 pulls.cannot_auto_merge_desc=Denna pull-förfrågan kan inte sammanfogas automatiskt eftersom det finns konflikter.
 pulls.cannot_auto_merge_helper=Vänligen sammanfoga manuellt för att lösa konflikter.
+pulls.create_merge_commit=Create a merge commit
+pulls.rebase_before_merging=Rebase before merging
+pulls.commit_description=Commit Description
 pulls.merge_pull_request=Sammanfoga Pull-förfrågan
 pulls.open_unmerged_pull_exists=`Du kan inte utföra återöppningsoperationen eftersom det finns redan en öppen pull-förfrågan (#%d) från samma repo med samma sammanfogningsinformation som väntar på sammanfogning.`
 pulls.delete_branch=Ta bort gren
@@ -704,7 +715,7 @@ settings.protect_require_pull_request_desc=Enable this option to disable direct
 settings.protect_whitelist_committers=Whitelist who can push to this branch
 settings.protect_whitelist_committers_desc=Add people or teams to whitelist of direct push to this branch. Users in whitelist will bypass require pull request check.
 settings.protect_whitelist_users=Users who can push to this branch
-settings.protect_whitelist_search_users=Search users
+settings.protect_whitelist_search_users=Sök användare
 settings.protect_whitelist_teams=Teams for which members of them can push to this branch
 settings.protect_whitelist_search_teams=Search teams
 settings.update_protect_branch_success=Protect options for this branch has been updated successfully!
@@ -735,7 +746,9 @@ settings.tracker_issue_style=Namngivningsstil hos det externa ärendehanteringsy
 settings.tracker_issue_style.numeric=Numerisk
 settings.tracker_issue_style.alphanumeric=Alfanumerisk
 settings.tracker_url_format_desc=Du kan använda platshållaren <code>{user} {repo} {index}</code> för användarnamn, reponamn, och ärendenummer.
-settings.pulls_desc=Aktivera pullförfrågningar för att ta emot publika bidrag
+settings.pulls_desc=Enable pull requests to accept contributions between repositories and branches
+settings.pulls.ignore_whitespace=Ignore changes in whitespace
+settings.pulls.allow_rebase_merge=Allow use rebase to merge commits
 settings.danger_zone=Högrisksområde
 settings.cannot_fork_to_same_owner=You cannot fork a repository to its original owner.
 settings.new_owner_has_same_repo=Den nya ägaren har redan ett repo med det namnet. Vänligen välj ett annat namn.
@@ -756,7 +769,7 @@ settings.wiki_deletion_success=Förrådets wikidata har tagits bort.
 settings.delete=Ta Bort Detta Repo
 settings.delete_desc=När du har tagit bort ett repo så finns det ingen återvändo. Var säker på vad du gör.
 settings.delete_notices_1=- Denna åtgärd kan <strong>INTE</strong> ångras.
-settings.delete_notices_2=- Denna åtgärd kommer permanent ta bort hela repot, includerat git-datan, ärenden, kommentarer, och åtkomst för deltagare.
+settings.delete_notices_2=- This operation will permanently delete everything in this repository, including Git data, issues, comments and collaborator access.
 settings.delete_notices_fork_1=- Alla förgreningar kommer bli oberoende efter borttagning.
 settings.deletion_success=Repot har tagits bort!
 settings.update_settings_success=Repo-inställningar har uppdaterats.
@@ -814,10 +827,10 @@ settings.event_push=Pusha
 settings.event_push_desc=Uppladdning till ett förråd
 settings.event_issues=Issues
 settings.event_issues_desc=Issue opened, closed, reopened, edited, assigned, unassigned, label updated, label cleared, milestoned, or demilestoned.
-settings.event_issue_comment=Issue Comment
-settings.event_issue_comment_desc=Issue comment created, edited, or deleted.
 settings.event_pull_request=Hämtningsbegäran
 settings.event_pull_request_desc=Pull request opened, closed, reopened, edited, assigned, unassigned, label updated, label cleared, milestoned, demilestoned, or synchronized.
+settings.event_issue_comment=Issue Comment
+settings.event_issue_comment_desc=Issue comment created, edited, or deleted.
 settings.event_release=Release
 settings.event_release_desc=Release published in a repository.
 settings.active=Aktiv
@@ -830,6 +843,7 @@ settings.recent_deliveries=Färska leveranser
 settings.hook_type=Kroktyp
 settings.add_slack_hook_desc=Lägg till <a href="%s">Slack</a>-integration till ditt förråd.
 settings.add_discord_hook_desc=Add <a href="%s">Discord</a> integration to your repository.
+settings.add_dingtalk_hook_desc=Add <a href="%s">Dingtalk</a> integration to your repository.
 settings.slack_token=Pollett
 settings.slack_domain=Domän
 settings.slack_channel=Kanal
@@ -846,6 +860,8 @@ settings.add_key_success=Den nya driftsättningsnyckeln '%s' har lagts till!
 settings.deploy_key_deletion=Ta bort distribueringsnyckel
 settings.deploy_key_deletion_desc=Borttagning av detta distributionsnyckel kommer att ta bort all relaterad åtkomst till det här repot. Vill du fortsätta?
 settings.deploy_key_deletion_success=Distributionsnyckeln har tagits bort!
+settings.description_desc=Description of repository. Maximum 512 characters length.
+settings.description_length=Available characters
 
 diff.browse_source=Bläddra i källkod
 diff.parent=förälder
@@ -1081,11 +1097,12 @@ repos.stars=Stjärnor
 repos.issues=Ärenden
 repos.size=Size
 
-auths.auth_manage_panel=Panel för hantering av autentisering
+auths.auth_sources=Authentication Sources
 auths.new=Lägg till ny källa
 auths.name=Namn
 auths.type=Typ
 auths.enabled=Aktiv
+auths.default=Default
 auths.updated=Uppdaterad
 auths.auth_type=Autentiseringstyp
 auths.auth_name=Autentiseringsnamn
@@ -1094,6 +1111,7 @@ auths.domain=Domän
 auths.host=Värd
 auths.port=Port
 auths.bind_dn=Bind DN
+auths.bind_dn_helper=You can use '%s' as placeholder for username, e.g. DOM\%s
 auths.bind_password=Bind lösenord
 auths.bind_password_helper=Warning: This password is stored in plain text. Do not use a high privileged account.
 auths.user_base=User Search Base
@@ -1121,9 +1139,9 @@ auths.enable_tls=Aktivera TLS-kryptering
 auths.skip_tls_verify=Skip TLS Verify
 auths.pam_service_name=PAM Service Name
 auths.enable_auto_register=Enable Auto Registration
-auths.tips=Tips
 auths.edit=Edit Authentication Setting
 auths.activated=This authentication is activated
+auths.default_auth=This authentication is default login source
 auths.new_success=New authentication '%s' has been added successfully.
 auths.update_success=Authentication setting has been updated successfully.
 auths.update=Update Authentication Setting
@@ -1134,6 +1152,7 @@ auths.still_in_used=This authentication is still used by some users, please dele
 auths.deletion_success=Authentication has been deleted successfully!
 auths.login_source_exist=Login source '%s' already exists.
 
+config.not_set=(not set)
 config.server_config=Server-konfiguration
 config.app_name=Applikationsnamn
 config.app_ver=Applikationsversion
@@ -1155,6 +1174,7 @@ config.ssh_domain=Domän
 config.ssh_port=Port
 config.ssh_listen_port=Lyssningsport
 config.ssh_root_path=Rotsökväg
+config.ssh_rewrite_authorized_keys_at_start=Rewrite authorized_keys At Start
 config.ssh_key_test_path=Testsökväg för nyckel
 config.ssh_keygen_path=Sökväg för nyckelgenerator ('ssh-keygen')
 config.ssh_minimum_key_size_check=Kontroll av minsta tillåtna nyckelstorlek
@@ -1170,6 +1190,9 @@ config.disable_http_git=Disable HTTP Git
 config.enable_local_path_migration=Enable Local Path Migration
 config.commits_fetch_concurrency=Commits Fetch Concurrency
 
+config.http_config=HTTP Configuration
+config.http_access_control_allow_origin=Access Control Allow Origin
+
 config.db_config=Databaskonfiguration
 config.db_type=Typ
 config.db_host=Värd
@@ -1199,7 +1222,7 @@ config.skip_tls_verify=Skippa verifikation av TLS
 config.mailer_config=Konfiguration för e-postutskick
 config.mailer_enabled=Aktiverad
 config.mailer_disable_helo=Avaktivera HELO
-config.mailer_name=Namn
+config.mailer_subject_prefix=Subject Prefix
 config.mailer_host=Server
 config.mailer_user=Användare
 config.send_test_mail=Skicka testmeddelande
@@ -1272,7 +1295,6 @@ notices.delete_success=System notices have been deleted successfully.
 
 [action]
 create_repo=skapade utvecklingskatalog <a href="%s"> %s</a>
-fork_repo=forked a repository to <a href="%s">%s</a>
 rename_repo=renamed repository from <code>%[1]s</code> to <a href="%[2]s">%[3]s</a>
 commit_repo=pushed to <a href="%[1]s/src/%[2]s">%[3]s</a> at <a href="%[1]s">%[4]s</a>
 compare_commits=View comparison for these %d commits
@@ -1289,6 +1311,10 @@ create_branch=created new branch <a href="%[1]s/src/%[2]s">%[3]s</a> at <a href=
 delete_branch=deleted branch <code>%[2]s</code> at <a href="%[1]s">%[3]s</a>
 push_tag=pushed tag <a href="%s/src/%s">%[2]s</a> to <a href="%[1]s">%[3]s</a>
 delete_tag=deleted tag <code>%[2]s</code> at <a href="%[1]s">%[3]s</a>
+fork_repo=forked a repository to <a href="%s">%s</a>
+mirror_sync_push=synced commits to <a href="%[1]s/src/%[2]s">%[3]s</a> at <a href="%[1]s">%[4]s</a> from mirror
+mirror_sync_create=synced new reference <a href="%s/src/%s">%[2]s</a> to <a href="%[1]s">%[3]s</a> from mirror
+mirror_sync_delete=synced and deleted reference <code>%[2]s</code> at <a href="%[1]s">%[3]s</a> from mirror
 
 [tool]
 ago=sedan

conf/locale/locale_tr-TR.ini

@@ -58,7 +58,7 @@ db_name=Veritabanı Adı
 db_helper=Lütfen MySQL için INNODB motorunu utf8_general_ci karakter setiyle kullanın.
 ssl_mode=SSL Biçimi
 path=Yol
-sqlite_helper=The file path of SQLite3 database. <br>Please use absolute path when you start as service.
+sqlite_helper=SQLite3 veritabanının dosya yolu.<br> Lütfen cihaz başladığında kesin yolu kullan.
 err_empty_db_path=SQLite3 veritabanının yolu boş olamaz.
 no_admin_and_disable_registration=Bir yönetici hesabı oluşturmadan kullanıcı kaydını devre dışı bırakamazsınız.
 err_empty_admin_password=Yönetici parolası boş olamaz.
@@ -75,7 +75,7 @@ domain_helper=Bu, SSH klon bağlantılarını etkiler.
 ssh_port=SSH Portu
 ssh_port_helper=SSH sunucunuzun portu kullanılıyor, boş bırakın ya da SSH özelliğini devre dışı bırakın.
 use_builtin_ssh_server=Yerleşik SSH sunucusu kullanın
-use_builtin_ssh_server_popup=Start builtin SSH server for Git operations to distinguish from system SSH daemon.
+use_builtin_ssh_server_popup=Git işlemlerinde SSH sunucusundan sistem SSH arka plan programından ayrılmaya başlayın.
 http_port=HTTP Portu
 http_port_helper=Uygulamanın dinleyeceği port.
 app_url=Uygulama Bağlantısı
@@ -83,7 +83,7 @@ app_url_helper=Bu, HTTP/HTTPS klon bağlantılarını ve e-postadaki bazı kıs
 log_root_path=Günlük Dosyaları Yolu
 log_root_path_helper=Günlük dosyalarının yazılacağı dizin.
 enable_console_mode=Konsol Modunu Etkinleştir
-enable_console_mode_popup=In addition to file mode, also print logs to console.
+enable_console_mode_popup=Dosya moduna ek olarak , ayrıca konsolun günlüklerini yazdır.
 
 optional_title=İsteğe Bağlı Ayarlar
 email_title=E-Posta Servisi Ayarları
@@ -99,8 +99,8 @@ offline_mode=Çevrim Dışı Modu Etkinleştir
 offline_mode_popup=CDN'i, üretim modunda bile devre dışı bırak, tüm kaynak dosyaları yerel olarak sunulacaktır.
 disable_gravatar=Gravatar Servisini Devre Dışı Bırak
 disable_gravatar_popup=Gravatar ve özel kaynakları devre dışı bırak. Tüm avatarlar kullanıcılar tarafından yüklenir veya varsayılan kalır.
-federated_avatar_lookup=Enable Federated Avatars Lookup
-federated_avatar_lookup_popup=Enable federated avatars lookup to use federated open source service based on libravatar.
+federated_avatar_lookup=Birleşmiş Kişi Simgesi Aramasını Etkinleştir
+federated_avatar_lookup_popup=Libravatar'a dayalı birleşmiş açık kaynaklı hizmeti kullanmak için birleşmiş avatarlar aramasını etkinleştirin.
 disable_registration=Kendi Kendine Kaydolmayı Devre Dışı Bırak
 disable_registration_popup=Kullanıcının kendi kendine kaydolmasını devre dışı bırak, yalnızca yönetici yeni hesaplar oluşturabilir.
 enable_captcha=Captcha'yı Etkinleştir
@@ -119,8 +119,8 @@ sqlite3_not_available=Yayın sürümünüz SQLite3'ü desteklemiyor, lütfen %s'
 invalid_db_setting=Veritabanı ayarları geçersiz: %v
 invalid_repo_path=Depo kök dizini geçersiz: %v
 run_user_not_match=Çalıştırma kullanıcısı geçerli kullanıcı değil: %s -> %s
-smtp_host_missing_port=SMTP Host is missing port in address.
-invalid_smtp_from=SMTP From field is not valid: %v
+smtp_host_missing_port=SMTP ana makine adresindeki bağlantı noktası eksik.
+invalid_smtp_from=SMTP form alanı geçerli değil: %v
 save_config_failed=Yapılandırma kaydedilemedi: %v
 invalid_admin_setting=Yönetici hesap ayarları geçersiz: %v
 install_success=Merhaba! Gogs'u tercih ettiğiniz için çok mutluyuz, keyfini çıkarın!
@@ -151,6 +151,8 @@ register_hepler_msg=Bir hesabınız var mı? Şimdi giriş yapın!
 social_register_hepler_msg=Zaten bir hesabınız var mı? Şimdi bağlanın!
 disable_register_prompt=Üzgünüz, kaydolma devre dışı bırakıldı. Lütfen site yöneticisiyle irtibata geçin.
 disable_register_mail=Üzgünüz, kayıt doğrulama e-postası devre dışı bırakıldı.
+auth_source=Yetkilendirme Kaynağı
+local=Yerel
 remember_me=Beni Hatırla
 forgot_password=Parolamı Unuttum
 forget_password=Parolanızı mı unuttunuz?
@@ -170,12 +172,12 @@ password_too_short=Parola uzunluğu 6 karakterden az olamaz.
 non_local_account=Yerel olmayan hesapların şifrelerini Gogs aracılığıyla değiştiremezsiniz.
 
 login_two_factor=İki aşamalı doğrulama
-login_two_factor_passcode=Authentication Passcode
-login_two_factor_enter_recovery_code=Enter a two-factor recovery code
-login_two_factor_recovery=Two-factor Recovery
+login_two_factor_passcode=Kimlik doğrulama Şifre kodu
+login_two_factor_enter_recovery_code=İki faktörlü kurtarma kodu girin
+login_two_factor_recovery=İki faktörlü Kurtarma
 login_two_factor_recovery_code=Kurtarma kodu
-login_two_factor_enter_passcode=Enter a two-factor passcode
-login_two_factor_invalid_recovery_code=Recovery code has been used or does not valid.
+login_two_factor_enter_passcode=İki faktörlü şifre kodu girin
+login_two_factor_invalid_recovery_code=Kurtarma kodu kullanılmış veya geçerli değil.
 
 [mail]
 activate_account=Lütfen hesabınızı aktifleştirin
@@ -202,7 +204,7 @@ TeamName=Takım ismi
 AuthName=Yetkilendirme adı
 AdminEmail=Yönetici e-postası
 
-NewBranchName=New branch name
+NewBranchName=Yeni bölüm adı
 CommitSummary=İşleme özeti
 CommitMessage=İşleme mesajı
 CommitChoice=İşleme tercihi
@@ -212,7 +214,7 @@ Content=İçerik
 require_error=` boş olamaz.`
 alpha_dash_error=` sadece karakter, rakam veya çizgi(-_) içermelidir.`
 alpha_dash_dot_error=` sadece karakter, rakam, çizgi(-_) veya nokta içermelidir.`
-alpha_dash_dot_slash_error=` must be valid alpha or numeric or dash(-_) or dot characters or slashes.`
+alpha_dash_dot_slash_error=` geçerli alfa veya sayısal veya uzunçizgi(-_) veya nokta karakterler veya eğiz çizgi olmalıdır.`
 size_error=` uzunluk en fazla %s olmalıdır.`
 min_size_error=` en az %s karakter içermelidir.`
 max_size_error=` en fazla %s karakter içermelidir.`
@@ -229,6 +231,7 @@ org_name_been_taken=Bu organizasyon adı zaten alınmış.
 team_name_been_taken=Bu takım adı zaten alınmış.
 email_been_used=Bu e-posta adresi zaten kullanımda.
 username_password_incorrect=Kullanıcı adı veya parola hatalı.
+auth_source_mismatch=Seçilen kimlik doğrulama kaynağı kullanıcı ile ilişkili değil.
 enterred_invalid_repo_name=Lütfen girdiğiniz depo isminin doğru olduğundan emin olun.
 enterred_invalid_owner_name=Lütfen girdiğiniz depo sahibi isminin doğru olduğundan emin olun.
 enterred_invalid_password=Lütfen girdiğiniz parolanın doğru olduğundan emin olun.
@@ -283,8 +286,8 @@ change_username_prompt=Bu değişiklik, hesabınızla ilişkili olan bağlantıl
 continue=Devam Et
 cancel=İptal
 
-lookup_avatar_by_mail=Lookup Avatar by mail
-federated_avatar_lookup=Federated Avatar Lookup
+lookup_avatar_by_mail=E-postaya göre Avatar Arama
+federated_avatar_lookup=Birleşmiş Avatar Araması
 enable_custom_avatar=Özel Avatarı Etkinleştir
 choose_new_avatar=Yeni Avatar Seç
 update_avatar=Avatar Ayarlarını Güncelle
@@ -334,30 +337,31 @@ no_activity=Yeni aktivite yok
 key_state_desc=Bu anahtar son 7 gün içinde kullanıldı
 token_state_desc=Bu erişim anahtarı son 7 gün içinde kullanıldı
 
-two_factor=Two-factor Authentication
-two_factor_status=Status:
+two_factor=İki faktörlü Kimlik doğrulama
+two_factor_status=Durum:
 two_factor_on=Açık
 two_factor_off=Kapalı
-two_factor_enable=Enable
-two_factor_disable=Disable
-two_factor_view_recovery_codes=View and save <a href="%s%s">your recovery codes</a> in a safe place. You can use them as passcode if you lose access to your authentication application.
-two_factor_http=For HTTP/HTTPS operations, you are no longer able to use plain username and password. Please create and use <a href="%[1]s%[2]s">Personal Access Token</a> as your credential, e.g. <code>%[3]s</code>.
-two_factor_enable_title=Enable Two-factor Authentication
-two_factor_scan_qr=Please use your authentication application to scan the image:
-two_factor_or_enter_secret=Or enter the secret:
-two_factor_then_enter_passcode=Then enter passcode:
-two_factor_verify=Verify
-two_factor_invalid_passcode=The passcode you entered is not valid, please try again!
-two_factor_enable_error=Enable Two-factor authentication failed: %v
-two_factor_enable_success=Two-factor authentication has enabled for your account successfully!
-two_factor_recovery_codes_title=Two-factor Authentication Recovery Codes
-two_factor_recovery_codes_desc=Recovery codes are used when you temporarily lose access to your authentication application. Each recovery code can only be used once, <b>please keep these codes in a safe place</b>.
-two_factor_regenerate_recovery_codes=Regenerate Recovery Codes
-two_factor_regenerate_recovery_codes_error=Regenerate recovery codes failed: %v
-two_factor_regenerate_recovery_codes_success=New recovery codes has been generated successfully!
-two_factor_disable_title=Disable Two-factor Authentication
-two_factor_disable_desc=Your account security level will decrease after disabled two-factor authentication. Do you want to continue?
-two_factor_disable_success=Two-factor authentication has disabled successfully!
+two_factor_enable=Etkin
+two_factor_disable=Devre dışı
+two_factor_view_recovery_codes=Görüntüle ve güvenli bir yere </a> kurtarma kodlarınızı <a href="%s%s"><a href="%s%s"><a href="%s%s"> kaydedin. Eğer kimlik doğrulama uygulamanız için erişimi kaybetmişseniz bunları şifre kodu olarak kullanabilirsiniz.
+two_factor_http=HTTP/HTTPS işlemleri için , artık düz kullanıcı adı ve şifre kullanamazsınız. Lütfen oluşturun ve <a href="%[1]s%[2]s"> Kişisel Erişim Jetonu </a> kimlik belgesi olarak kullanın , örneğin <code>%[3]s</code>.
+two_factor_enable_title=İki faktörlü Kimlik doğrulamasını Etkinleştir
+two_factor_scan_qr=Lütfen resmi taramak için kimlik doğrulama uygulamanızı kullanın:
+two_factor_or_enter_secret=Veya parola girin:
+two_factor_then_enter_passcode=Daha sonra şifre kodunu girin:
+two_factor_verify=Doğrula
+two_factor_invalid_passcode=Girdiğiniz şifre kodu geçersiz,lütfen tekrar deneyin!
+two_factor_reused_passcode=Girdiğiniz şifre zaten kullanılmış, lütfen başka bir tane deneyin!
+two_factor_enable_error=İki faktörlü kimlik doğrulama etkinleştirmesi başarısız :%v
+two_factor_enable_success=Hesabınız için iki faktörlü kimlik doğrulama başarıyla devre dışı bırakıldı!
+two_factor_recovery_codes_title=İki faktörlü Kimlik doğrulama Kurtarma Kodları
+two_factor_recovery_codes_desc=Kurtarma kodları , geçici olarak kimlik doğrulama uygulamanızın erişimini kaybettiğinizde kullanıldı. Herbir kurtarma kodu sadece birkez kullanılablir,<b>lütfen bu kodları güvenli bir yere sakla</b>.
+two_factor_regenerate_recovery_codes=Kurtarma Kodlarını Yeniden oluştur
+two_factor_regenerate_recovery_codes_error=Kurtarma kodları yeniden oluşturma başarısız: %v
+two_factor_regenerate_recovery_codes_success=Yeni kurtarma kodları başarıyla oluşturuldu!
+two_factor_disable_title=İki faktörlü Kimlik doğrulama Devre dışı
+two_factor_disable_desc=Hesap güvenliği seviyeniz, devre dışı bırakılmış iki faktörlü kimlik doğrulamadan sonra azalacaktır. Devam etmek istiyor musunuz?
+two_factor_disable_success=İki faktörlü kimli doğrulama başarıyla devre dışı bırakıldı!
 
 manage_access_token=Kişisel Erişim Anahtarlarını Yönet
 generate_new_token=Yeni Erişim Anahtarı Üret
@@ -371,14 +375,14 @@ access_token_deletion=Kişisel Erişim Anahtarını Silme
 access_token_deletion_desc=Bu kişisel erişim anahtarını silerseniz uygulamanıza ilişkin tüm erişimler de kaldırılacaktır. Devam etmek istiyor musunuz?
 delete_token_success=Kişisel erişim anahtarı başarıyla kaldırıldı! Uygulamanızı güncellemeyi de unutmayın!
 
-orgs.none=You are not a member of any organizations.
-orgs.leave_title=Leave organization
-orgs.leave_desc=You will lose access to all repositories and teams after you left the organization. Do you want to continue?
+orgs.none=Hiçbir organizasyonların üyesi değilsiniz.
+orgs.leave_title=Organizasyondan ayrıl
+orgs.leave_desc=Organizasyondan ayrıldıktan sonra tüm depolar ve ekiplere erişimi kaybedeceksiniz.Devam etmek istiyor musunuz?
 
-repos.leave=Leave
-repos.leave_title=Leave repository
-repos.leave_desc=You will lose access to the repository after you left. Do you want to continue?
-repos.leave_success=You have left repository '%s' successfully!
+repos.leave=Ayrıl
+repos.leave_title=Depodan ayrıl
+repos.leave_desc=Çıktıktan sonra depo erişimini kaybedeceksiniz.Devam etmek istiyor musunuz?
+repos.leave_success='%s' deposundan başarıyla ayrıldınız!
 
 delete_account=Hesabınızı Silin
 delete_prompt=Bu işlem hesabınızı kalıcı olarak silecektir ve <strong>GERİ ALINAMAZ</strong>!
@@ -400,7 +404,7 @@ fork_from=Buradan Çatalla
 fork_visiblity_helper=Çatallanmış bir deponun görünürlüğünü değiştiremezsiniz.
 repo_desc=Açıklama
 repo_lang=Dil
-repo_gitignore_helper=Select .gitignore templates
+repo_gitignore_helper=.gitignore şablonlarını seç
 license=Lisans
 license_helper=Bir lisans dosyası seçin
 readme=Benioku
@@ -413,10 +417,12 @@ mirror_prune_desc=Uzakta olmayan bütün uzaktan-izleme referanslarını sil
 mirror_interval=Yansı Aralığı (saat)
 mirror_address=Yansı Adresi
 mirror_address_desc=Lütfen gerekli kimlik bilgilerini adreste bulundurun.
-mirror_last_synced=Last Synced
+mirror_last_synced=Son Eşzamanlama
 watchers=İzleyenler
 stargazers=Yıldızlayanlar
 forks=Çatallamalar
+repo_description_helper=Depo açıklaması. Maksimum 512 karakter uzunluğu.
+repo_description_length=Mevcut karakterler
 
 form.reach_limit_of_creation=Sahip, maksimum %d depo oluşturma limitine ulaşmıştır.
 form.name_reserved=Depo ismi '%s' başkasına ayrılmış.
@@ -427,8 +433,8 @@ migrate_type=Göç Türü
 migrate_type_helper=Bu depo bir <span class="text blue">yansı</span> olacaktır
 migrate_repo=Depoyu Göç Ettir
 migrate.clone_address=Klon Adresi
-migrate.clone_address_desc=This can be a HTTP/HTTPS/GIT URL.
-migrate.clone_address_desc_import_local=You're also allowed to migrate a repository by local server path.
+migrate.clone_address_desc=Bu HTTP/HTTPS/GIT URL'si olabilir.
+migrate.clone_address_desc_import_local=Bir depoyu yerel sunucu yolu ile taşımanıza izin verilir.
 migrate.permission_denied=Yerel depoları içeri aktarma izniniz yok.
 migrate.invalid_local_path=Geçersiz yerel dizin! Böyle bir yol yok ya da bir dizin değil.
 migrate.failed=Göç başarısız: %v
@@ -450,9 +456,9 @@ quick_guide=Hızlı Başlangıç Kılavuzu
 clone_this_repo=Bu depoyu klonla
 create_new_repo_command=Komut satırında yeni bir depo oluştur
 push_exist_repo=Var olan bir depoyu komut satırında gönder
-bare_message=This repository does not have any content yet.
+bare_message=Bu depo henüz hiçbir içeriğe sahip değil.
 
-files=Files
+files=Dosyalar
 branch=Dal
 tree=Ağaç
 filter_branch_and_tag=Dal veya biçim imini filtrele
@@ -463,62 +469,63 @@ pulls=Değişiklik İstekleri
 labels=Etiketler
 milestones=Kilometre Taşları
 commits=İşlemeler
-git_branches=Branches
+git_branches=Bölümler
 releases=Sürümler
 file_raw=Ham
 file_history=Geçmiş
 file_view_raw=Ham Görünüm
 file_permalink=Kalıcı Bağlantı
 file_too_large=Bu dosya sergilenmek için çok büyük
-video_not_supported_in_browser=Your browser doesn't support HTML5 video tag.
+video_not_supported_in_browser=Tarayıcınız HTML5 video etkiketini desteklemiyor.
 
-branches.overview=Overview
-branches.active_branches=Active Branches
-branches.stale_branches=Stale Branches
-branches.all=All Branches
-branches.updated_by=Updated %[1]s by %[2]s
-branches.change_default_branch=Change Default Branch
+branches.overview=Genel görünüm
+branches.active_branches=Aktif Bölümler
+branches.stale_branches=Eskimiş Bölümler
+branches.all=Bütün Bölümler
+branches.updated_by=%[2]s tarafından %[1]s güncellendi
+branches.change_default_branch=Varsayılan Bölümü Değiştir
 
-editor.new_file=New file
-editor.upload_file=Upload file
+editor.new_file=Yeni dosya
+editor.upload_file=Dosyayı yükle
 editor.edit_file=Dosya düzenle
-editor.preview_changes=Preview Changes
+editor.preview_changes=Değişiklikleri Önizle
 editor.cannot_edit_non_text_files=Metin dışı dosyalar düzenlenemez
-editor.edit_this_file=Edit this file
-editor.must_be_on_a_branch=You must be on a branch to make or propose changes to this file
-editor.fork_before_edit=You must fork this repository before editing the file
-editor.delete_this_file=Delete this file
-editor.must_have_write_access=You must have write access to make or propose changes to this file
-editor.file_delete_success=File '%s' has been deleted successfully!
-editor.name_your_file=Name your file...
-editor.filename_help=To add directory, just type it and press /. To remove a directory, go to the beginning of the field and press backspace.
-editor.or=or
+editor.edit_this_file=Bu dosyayı düzenle
+editor.must_be_on_a_branch=Bu dosyada değişiklik yapmak için bir bölümde olmalısınız.
+editor.fork_before_edit=Dosyayı düzenlemeden önce bu depoyu iki kola ayırmalısınız
+editor.delete_this_file=Bu dosyayı sil
+editor.must_have_write_access=Bu dosyada değişiklik yapmak için yazma erişiminizin olması gerekir.
+editor.file_delete_success=%s dosyası başarıyla silindi!
+editor.name_your_file=Dosyanızın adı...
+editor.filename_help=Dizin eklemek için, dizini yazın ve / tuşuna basın. Bir dizini kaldırmak için alanın başına gidin ve geri tuşuna basın.
+editor.or=veya
 editor.cancel_lower=iptal
-editor.commit_changes=Commit Changes
-editor.add_tmpl=Add '%s/<filename>'
-editor.add=Add '%s'
-editor.update=Update '%s'
-editor.delete=Delete '%s'
-editor.commit_message_desc=Add an optional extended description...
-editor.commit_directly_to_this_branch=Commit directly to the <strong class="branch-name">%s</strong> branch.
-editor.create_new_branch=Create a <strong>new branch</strong> for this commit and start a pull request.
-editor.new_branch_name_desc=New branch name...
+editor.commit_changes=Değişiklikleri İşle
+editor.add_tmpl='%s/<filename>' ekle
+editor.add='%s' ekle
+editor.update='%s' güncelle
+editor.delete='%s' sil
+editor.commit_message_desc=İsteğe bağlı genişletilmiş açıklama ekleyin ...
+editor.commit_directly_to_this_branch=Doğrudan <strong class="Branch-name">%s</strong> şubesine geçin.
+editor.create_new_branch=Bu taahhüt ve çekme isteği başlatmak için.<strong>yeni şube</strong> oluşturma.
+editor.new_branch_name_desc=Yen şube adı...
 editor.cancel=İptal
-editor.filename_cannot_be_empty=Filename cannot be empty.
-editor.branch_already_exists=Branch '%s' already exists in this repository.
-editor.directory_is_a_file=Entry '%s' in the parent path is a file not a directory in this repository.
-editor.file_is_a_symlink=The file '%s' is a symlink that cannot be modified from the web editor.
-editor.filename_is_a_directory=The filename '%s' is an existing directory in this repository.
-editor.file_editing_no_longer_exists=The file '%s' you are editing no longer exists in the repository.
-editor.file_changed_while_editing=File content has been changed since you started editing. <a target="_blank" href="%s">Click here</a> to see what have been changed or <strong>press commit again</strong> to overwrite those changes.
-editor.file_already_exists=A file with name '%s' already exists in this repository.
-editor.no_changes_to_show=There are no changes to show.
-editor.fail_to_update_file=Failed to update/create file '%s' with error: %v
-editor.add_subdir=Add subdirectory...
-editor.unable_to_upload_files=Failed to upload files to '%s' with error: %v
-editor.upload_files_to_dir=Upload files to '%s'
+editor.filename_cannot_be_empty=Dosya adı boş olmamalı.
+editor.branch_already_exists='% s ' Şubesi bu depoda zaten var.
+editor.directory_is_a_file=Üst yoldaki '% s' girişi, bu depoda bir dizini olmayan dosyadır.
+editor.file_is_a_symlink='%s' dosyası, web editöründen değiştirilemeyen bir sembolik bağ.
+editor.filename_is_a_directory=Dosya adı '%s' bu depoda mevcut bir dizindir.
+editor.file_editing_no_longer_exists=Düzenlediğiniz dosya '%s' artık depoda yok.
+editor.file_changed_while_editing=Düzenlemeye başladıktan sonra dosya içeriği değiştirildi. Ne değiştiğini görmek için<a target="_blank" href="%s">Buraya tıklayın</a>Bu değişikliklerin üzerine yazmak için.<strong>yeniden yürütmeye basın</strong>.
+editor.file_already_exists='% s ' adlı bir dosya mevcutta zaten var.
+editor.no_changes_to_show=Gösterilecek bir değişiklik mevcut değil.
+editor.fail_to_update_file='%s' dosyası güncellenemedi / oluşturulamadı : %v hatasıyla
+editor.fail_to_delete_file='%s' dosyası hatalı bir şekilde silinemedi: %v
+editor.add_subdir=Alt dizin Ekle...
+editor.unable_to_upload_files='%s' dosyası yüklenemedi : %v hatasıyla
+editor.upload_files_to_dir=Dosyaları '%s' ye yükle
 
-commits.commit_history=Commit History
+commits.commit_history=Geçmişin Kaydedilmesi
 commits.commits=İşlemeler
 commits.search=İşleme Arama
 commits.find=Bul
@@ -544,11 +551,11 @@ issues.create=Sorun Oluştur
 issues.new_label=Yeni Etiket
 issues.new_label_placeholder=Etiket adı...
 issues.create_label=Etiket Oluştur
-issues.label_templates.title=Load a predefined set of labels
-issues.label_templates.info=There aren't any labels yet. You can click on the "New Label" button above to create one or use a predefined set below.
-issues.label_templates.helper=Select a label set
+issues.label_templates.title=Önceden tanımlanmış bir etiket kümesi yükleyin
+issues.label_templates.info=Henüz etiket yok. Yeni etiket oluşturmak için aşağıdaki "Yeni Etiket" düğmesine tıklayabilir veya aşağıda önceden tanımlanmış bir kümeyi kullanabilirsiniz.
+issues.label_templates.helper=Bir etiket seti seçin
 issues.label_templates.use=Use this label set
-issues.label_templates.fail_to_load_file=Failed to load label template file '%s': %v
+issues.label_templates.fail_to_load_file=Etiket şablon dosyası '%s' yüklenemedi: %v hatasıyla
 issues.open_tab=%d açık
 issues.close_tab=%d kapanmış
 issues.filter_label=Etiket
@@ -590,7 +597,7 @@ issues.commit_ref_at=`<a id="%[1]s" href="#%[1]s">%[2]s</a> işlemesinde bu soru
 issues.poster=Poster
 issues.collaborator=Katkıcı
 issues.owner=Sahibi
-issues.sign_in_require_desc=<a href="%s">Sign in</a> to join this conversation.
+issues.sign_in_require_desc=<a href="%s">Giriş yap</a> bu konuşmaya katılmak için.
 issues.edit=Düzenle
 issues.cancel=İptal
 issues.save=Kaydet
@@ -605,8 +612,8 @@ issues.label_deletion=Etiket Silme
 issues.label_deletion_desc=Bu etiketi silerseniz, bu etikete iliştirilmiş sorunlardaki tüm bilgiler de silinecektir. Devam etmek istiyor musunuz?
 issues.label_deletion_success=Etiket başarıyla silindi!
 issues.num_participants=%d Katılımcı
-issues.attachment.open_tab=`Click to see "%s" in a new tab`
-issues.attachment.download=`Click to download "%s"`
+issues.attachment.open_tab=` "%s '' yi yeni bir sekmede görmek için tıklayın `
+issues.attachment.download=`"%s" yi İndirmek için tıklayın `
 
 pulls.new=Yeni Değişiklik İsteği
 pulls.compare_changes=Değişiklikleri Karşılaştır
@@ -616,6 +623,7 @@ pulls.compare_compare=karşılaştır
 pulls.filter_branch=Dal filtrele
 pulls.no_results=Sonuç bulunamadı.
 pulls.nothing_to_compare=Karşılaştırılacak hiçbir şey yok, çünkü temel ve ana dal aynı.
+pulls.nothing_merge_base=Karşılaştırılacak bir şey yok çünkü iki şubenin tarihi tamamen farklı.
 pulls.has_pull_request=`Bu iki hedef için zaten bir değişiklik isteği var: <a href="%[1]s/pulls/%[3]d">%[2]s#%[3]d</a>`
 pulls.create=Değişiklik İsteği Oluştur
 pulls.title_desc=<code>%[3]s</code> içindeki <code>%[2]s</code> işlemelerini %[1]d ile birleştirmek istiyor
@@ -631,10 +639,13 @@ pulls.is_checking=Çakışma kontrolü sürüyor. Lütfen birkaç dakika içinde
 pulls.can_auto_merge_desc=Bu değişiklik isteği otomatik olarak birleştirilebilir.
 pulls.cannot_auto_merge_desc=Çakışmalardan dolayı bu değişiklik isteği otomatik olarak birleştirilemez.
 pulls.cannot_auto_merge_helper=Çakışmaları çözmek için lütfen elle birleştirin.
+pulls.create_merge_commit=Birleştirme işlemi oluşturma
+pulls.rebase_before_merging=Birleştirmeden önce yenidenreferans al
+pulls.commit_description=Taahhüt Açıklaması
 pulls.merge_pull_request=Değişiklik İsteğini Birleştir
 pulls.open_unmerged_pull_exists=`Yeniden açma işlemini gerçekleştiremezsiniz. Çünkü zaten aynı depodan, aynı birleştirme bilgisiyle açık olan bir değişiklik isteği var (#%d) ve birleştirme bekliyor.`
-pulls.delete_branch=Delete Branch
-pulls.delete_branch_has_new_commits=Branch cannot be deleted because it has new commits after mergence.
+pulls.delete_branch=Şubeyi Sil
+pulls.delete_branch_has_new_commits=Birleşmeden sonra yeni taahhütlere sahip olduğu için şube silinemez.
 
 milestones.new=Yeni Kilometre Taşı
 milestones.open_tab=%d Açık
@@ -685,59 +696,61 @@ settings.collaboration.admin=Yönetici
 settings.collaboration.write=Yaz
 settings.collaboration.read=Oku
 settings.collaboration.undefined=Belirsiz
-settings.branches=Branches
-settings.branches_bare=You cannot manage branches for bare repository. Please push some content first.
-settings.default_branch=Default Branch
-settings.default_branch_desc=The default branch is considered the "base" branch for code commits, pull requests and online editing.
-settings.update=Update
-settings.update_default_branch_unsupported=Change default branch is not supported by the Git version on server.
-settings.update_default_branch_success=Default branch of this repository has been updated successfully!
-settings.protected_branches=Protected Branches
-settings.protected_branches_desc=Protect branches from force pushing, accidental deletion and whitelist code committers.
-settings.choose_a_branch=Choose a branch...
-settings.branch_protection=Branch Protection
-settings.branch_protection_desc=Please choose protect options for branch <b>%s</b>.
-settings.protect_this_branch=Protect this branch
-settings.protect_this_branch_desc=Disable force pushes and prevent from deletion.
-settings.protect_require_pull_request=Require pull request instead direct pushing
-settings.protect_require_pull_request_desc=Enable this option to disable direct pushing to this branch. Commits have to be pushed to another non-protected branch and merged to this branch through pull request.
-settings.protect_whitelist_committers=Whitelist who can push to this branch
-settings.protect_whitelist_committers_desc=Add people or teams to whitelist of direct push to this branch. Users in whitelist will bypass require pull request check.
-settings.protect_whitelist_users=Users who can push to this branch
-settings.protect_whitelist_search_users=Search users
-settings.protect_whitelist_teams=Teams for which members of them can push to this branch
-settings.protect_whitelist_search_teams=Search teams
-settings.update_protect_branch_success=Protect options for this branch has been updated successfully!
+settings.branches=Şubeler
+settings.branches_bare=Korunmasız depo için şubeleri yönetemezsiniz. Önce bir miktar içeriği itin.
+settings.default_branch=Varsayılan Şube
+settings.default_branch_desc=Varsayılan şube , kod taahütleri, çekme talepleri ve çevrimiçi düzenleme için "temel" şube olarak kabul edilir.
+settings.update=Güncelle
+settings.update_default_branch_unsupported=Varsayılan şubeyi değiştir , sunucu üzerindeki Git sürüm tarafından desteklenmiyor.
+settings.update_default_branch_success=Bu deponun varsayılan şubesi başarıyla güncellendi!
+settings.protected_branches=Korunan Şubeler
+settings.protected_branches_desc=Şubeleri zorla bastırma, yanlışlıkla silme ve beyaz liste kod belirleyicilerine karşı koruyun.
+settings.choose_a_branch=Şube seç...
+settings.branch_protection=Şube Koruma
+settings.branch_protection_desc=Şube için koruma seçeneklerini seçiniz <b>%s</b>.
+settings.protect_this_branch=Bu şubeyi koru
+settings.protect_this_branch_desc=Kuvveti devre dışı bırak ve silinmesini önler.
+settings.protect_require_pull_request=Doğrudan itmek yerine istek istemek gereklidir
+settings.protect_require_pull_request_desc=Bu şubeye doğrudan itmeyi devre dışı bırakmak için bu seçeneği etkinleştirin. Komiteler korunmayan bir başka şubeye ittirilmeli ve çekme talebi vasıtasıyla bu şubeye birleştirilmelidir.
+settings.protect_whitelist_committers=Beyaz liste , bu şubeye kim itebilir 
+settings.protect_whitelist_committers_desc=Bu şubeye doğrudan itilen beyaz listeye kişi veya ek ekleyin. Beyaz listeden atlanılacak olan kullanıcılar çekme isteği kontrolüne ihtiyaç duyar.
+settings.protect_whitelist_users=Bu şubeye itebilecek kullanıcılar
+settings.protect_whitelist_search_users=Kullanıcıları ara
+settings.protect_whitelist_teams=Onların üyelerinin bu şubeye itebilecek takımları
+settings.protect_whitelist_search_teams=Takımları ara
+settings.update_protect_branch_success=Bu şube için koruma seçenekleri başarıyla güncellendi!
 settings.hooks=Web İstekleri
 settings.githooks=Git İstekleri
 settings.basic_settings=Temel Ayarlar
-settings.mirror_settings=Mirror Settings
-settings.sync_mirror=Sync Now
-settings.mirror_sync_in_progress=Mirror syncing is in progress, please refresh page in about a minute.
+settings.mirror_settings=Ayna Ayarları
+settings.sync_mirror=Şimdi Senkronize Et
+settings.mirror_sync_in_progress=Ayna senkronizasyonu devam ediyor, lütfen sayfayı yaklaşık bir dakika içinde yenileyin.
 settings.site=Resmi Web Sitesi
 settings.update_settings=Ayarları Güncelle
 settings.change_reponame_prompt=Bu değişiklik, bağlantıların depoyla olan ilişkisini etkileyecektir.
 settings.advanced_settings=Gelişmiş Ayarlar
 settings.wiki_desc=Viki sıstemini etkinleştir
-settings.use_internal_wiki=Use builtin wiki
-settings.allow_public_wiki_desc=Allow public access to wiki when repository is private
+settings.use_internal_wiki=Yerleşik wiki'yi kullanın
+settings.allow_public_wiki_desc=Depo özel olduğunda wiki'ye herkesin erişmesine izin ver
 settings.use_external_wiki=Harici Wiki kullan
 settings.external_wiki_url=Harici Wiki bağlantısı
 settings.external_wiki_url_desc=Ziyaretçiler, sekmeye tıkladıklarında bağlantıya yönlendirilecektir.
-settings.issues_desc=Enable issue tracker
-settings.use_internal_issue_tracker=Use builtin lightweight issue tracker
-settings.allow_public_issues_desc=Allow public access to issues when repository is private
+settings.issues_desc=Sorun izleyiciyi etkinleştir
+settings.use_internal_issue_tracker=Yerleşik hafif sorun izleyici kullanma
+settings.allow_public_issues_desc=Depo özel olduğunda toplulukların herkese açık olarak erişmesine izin ver
 settings.use_external_issue_tracker=Harici sorun takipçisi kullan
-settings.external_tracker_url=External Issue Tracker URL
-settings.external_tracker_url_desc=Visitors will be redirected to URL when they click on the tab.
+settings.external_tracker_url=Harici Konu İzleyici URL'si
+settings.external_tracker_url_desc=Ziyaretçiler, sekmeye tıkladıklarında bağlantıya yönlendirilecektir.
 settings.tracker_url_format=Harici Sorun Takipçisi Bağlantı Formatı
 settings.tracker_issue_style=Harici Hata İzleyicisi Adlandırma Stili:
 settings.tracker_issue_style.numeric=Sayısal
 settings.tracker_issue_style.alphanumeric=Alfanumerik
 settings.tracker_url_format_desc=Kullanıcı adı, depo ismi ve hata indeksi için <code>{kullanıcı} {depo} {indeks}</code> tutucusunu kullanabilirsiniz.
-settings.pulls_desc=Herkese açık katkıları kabul etmek için değişiklik isteklerini etkinleştirin
+settings.pulls_desc=Depolar ve Şubeler arasındaki katkıları kabul etmek için çekme isteklerini etkinleştir
+settings.pulls.ignore_whitespace=Boşluktaki değişiklikleri yoksay
+settings.pulls.allow_rebase_merge=Taahhütleri birleştirmek için yeniden tabanın kullanmasına izin ver
 settings.danger_zone=Tehlike Alanı
-settings.cannot_fork_to_same_owner=You cannot fork a repository to its original owner.
+settings.cannot_fork_to_same_owner=Bir depoyu orijinal sahibine ayıramazsınız.
 settings.new_owner_has_same_repo=Yeni sahibin aynı isimde başka bir deposu var. Lütfen farklı bir isim seçin.
 settings.convert=Düzenli Depoya Dönüştür
 settings.convert_desc=Bu yansıyı düzenli bir depoya dönüştürebilirsiniz. Bu işlem geri alınamaz.
@@ -756,7 +769,7 @@ settings.wiki_deletion_success=Deponun Wiki verisi başarıyla silindi.
 settings.delete=Bu Depoyu Sil
 settings.delete_desc=Bir depoyu bir kez sildiğiniz taktirde geri getiremezsiniz. Lütfen emin olun.
 settings.delete_notices_1=- Bu işlem geri <strong>ALINAMAZ</strong>.
-settings.delete_notices_2=- Bu işlem, bu depodaki her şeyi (Git verisini, sorunları, yorumları ve katkıcı erişimlerini) kalıcı olarak silecektir.
+settings.delete_notices_2=- Bu işlem, git verileri, sorunlar, yorumlar ve işbirlikçi erişimi de dahil olmak üzere bu depodaki her şeyi kalıcı olarak siler.
 settings.delete_notices_fork_1=Silme işleminden sonra bütün çatallar bağımsız hale gelir.
 settings.deletion_success=Depo başarıyla silindi!
 settings.update_settings_success=Depo seçenekleri başarıyla güncellendi.
@@ -780,8 +793,8 @@ settings.webhook_deletion_success=Web isteği başarıyla silindi!
 settings.webhook.test_delivery=Test Dağıtımı
 settings.webhook.test_delivery_desc=Web isteği ayarlarınızı test etmek için sahte bir anlık olay gönderin
 settings.webhook.test_delivery_success=Test web isteği, dağıtım kuyruğuna eklendi. Bunun dağıtım geçmişinde görünmesi birkaç saniye sürebilir.
-settings.webhook.redelivery=Redelivery
-settings.webhook.redelivery_success=Hook task '%s' has been readded to delivery queue. It may take few seconds to update delivery status in history.
+settings.webhook.redelivery=Yeniden teslimat
+settings.webhook.redelivery_success=Kanca görev '%s' teslim kuyruğuna eklenmiştir. Bu tarihte teslim durumunu güncellemek birkaç saniye sürebilir.
 settings.webhook.request=İstekler
 settings.webhook.response=Cevaplar
 settings.webhook.headers=Başlıklar
@@ -796,7 +809,7 @@ settings.add_webhook_desc=Gogs, meydana gelen olay ile birlikte belirttiğiniz b
 settings.payload_url=Yük Bağlantısı
 settings.content_type=İçerik Türü
 settings.secret=Gizli
-settings.secret_desc=Secret will be sent as SHA256 HMAC hex digest of payload via <code>X-Gogs-Signature</code> header.
+settings.secret_desc=Gizli, <code>X-Gogs-Signature</code> başlığı ile SHA256 hmac hexdigest yükü olarak gönderilecektir.
 settings.slack_username=Kullanıcı Adı
 settings.slack_icon_url=Simge Bağlantısı
 settings.slack_color=Renk
@@ -806,20 +819,20 @@ settings.event_send_everything=<strong>Her şeye</strong> ihtiyacım var.
 settings.event_choose=Neye ihtiyacım olduğunu seçtir.
 settings.event_create=Oluştur
 settings.event_create_desc=Dal veya biçim imi oluşturuldu
-settings.event_delete=Delete
-settings.event_delete_desc=Branch or tag deleted
-settings.event_fork=Fork
-settings.event_fork_desc=Repository forked
+settings.event_delete=Sil
+settings.event_delete_desc=Dal veya etiket silindi
+settings.event_fork=Çatalla
+settings.event_fork_desc=Depo çatallandı
 settings.event_push=Push
 settings.event_push_desc=Bir depoya git push
-settings.event_issues=Issues
-settings.event_issues_desc=Issue opened, closed, reopened, edited, assigned, unassigned, label updated, label cleared, milestoned, or demilestoned.
-settings.event_issue_comment=Issue Comment
-settings.event_issue_comment_desc=Issue comment created, edited, or deleted.
-settings.event_pull_request=Pull Request
-settings.event_pull_request_desc=Pull request opened, closed, reopened, edited, assigned, unassigned, label updated, label cleared, milestoned, demilestoned, or synchronized.
-settings.event_release=Release
-settings.event_release_desc=Release published in a repository.
+settings.event_issues=Sorunlar
+settings.event_issues_desc=Sorun açıldı, kapatıldı, yeniden açıldı, düzenlendi, atandı, atanmadı, etiket güncellendi, etiket silindi, dönüm noktası yapıldı ya da iptal edildi.
+settings.event_pull_request=İstek Çek
+settings.event_pull_request_desc=Çekme isteği açıldı, kapatıldı, yeniden açıldı, düzenlendi, atandı, atanmamış, etiket güncellendi, etiket silindi, kilometre taşları, dönüm noktası veya senkronize edildi.
+settings.event_issue_comment=Sorun Yorumu
+settings.event_issue_comment_desc=Konu yorumu eklendi, düzenlendi veya silindi.
+settings.event_release=Yayın
+settings.event_release_desc=Bir depoda yayınlanan sürüm.
 settings.active=Aktif
 settings.active_helper=Bu isteği tetikleyen olaya ilişkin detaylar da gönderilecektir.
 settings.add_hook_success=Yeni web isteği eklendi.
@@ -829,12 +842,13 @@ settings.delete_webhook=Web İsteğini Sil
 settings.recent_deliveries=Son Dağıtımlar
 settings.hook_type=İstek Türü
 settings.add_slack_hook_desc=Deponuza <a href="%s">Slack</a> entegrasyonunu ekleyin.
-settings.add_discord_hook_desc=Add <a href="%s">Discord</a> integration to your repository.
+settings.add_discord_hook_desc=Deponuza <a href="%s">Discord</a> entegrasyonu ekleyin.
+settings.add_dingtalk_hook_desc=Deponuza <a href="%s">Dingtalk</a> entegrasyonu ekleyin.
 settings.slack_token=Erişim Anahtarı
 settings.slack_domain=Alan Adı
 settings.slack_channel=Kanal
 settings.deploy_keys=Dağıtım Anahtarları
-settings.deploy_keys_helper=<b>Common Gotcha!</b> If you're looking for adding personal public keys, please add them in your <a href="%s%s">account settings</a>.
+settings.deploy_keys_helper=<b>Ortak Gotcha!</b> Kişisel ortak anahtarlar eklemek istiyorsanız lütfen bunları <a href="%s%s">hesap ayarlarınıza</a> ekleyin.
 settings.add_deploy_key=Dağıtım Anahtarı Ekle
 settings.deploy_key_desc=Dağıtım anahtarlarının yalnızca okuma izni vardır. Kişisel hesapların SSH anahtarlarıyla aynı değillerdir.
 settings.no_deploy_keys=Herhangi bir dağıtım anahtarı eklemediniz.
@@ -846,6 +860,8 @@ settings.add_key_success=Yeni dağıtım anahtarı '%s' başarıyla eklendi!
 settings.deploy_key_deletion=Dağıtım Anahtarını Sil
 settings.deploy_key_deletion_desc=Bu dağıtım anahtarını silerseniz bu depoya ilişkin tüm erişimler de kaldırılacaktır. Devam etmek istiyor musunuz?
 settings.deploy_key_deletion_success=Dağıtım anahtarı başarıyla silindi!
+settings.description_desc=Depo açıklaması. Maksimum 512 karakter uzunluğu.
+settings.description_length=Mevcut karakterler
 
 diff.browse_source=Kaynağa Gözat
 diff.parent=ebeveyn
@@ -912,7 +928,7 @@ team_permission_desc=Bu takım, ne gibi bir izin seviyesine sahiptir?
 
 form.name_reserved=Organizasyon adı '%s' başka birisine ayrılmış.
 form.name_pattern_not_allowed=Organizasyon adı modeli '%s' geçersiz.
-form.team_name_reserved=Team name '%s' is reserved.
+form.team_name_reserved='%s' takım ismi başka birine ayrılmış.
 
 settings=Ayarlar
 settings.options=Seçenekler
@@ -1003,8 +1019,8 @@ dashboard.git_gc_repos=Depolarda çöp toplama işlemini gerçekleştir
 dashboard.git_gc_repos_success=Tüm depolarda çöp toplama işlemi başarıyla gerçekleştirildi.
 dashboard.resync_all_sshkeys='.ssh/authorized_keys' dosyasını yeniden yaz (dikkat: Gogs'un olmayan anahtarlar silinecektir)
 dashboard.resync_all_sshkeys_success=Tüm genel anahtarlar başarıyla yeniden yazıldı.
-dashboard.resync_all_hooks=Resync pre-receive, update and post-receive hooks of all repositories
-dashboard.resync_all_hooks_success=All repositories' pre-receive, update and post-receive hooks have been resynced successfully.
+dashboard.resync_all_hooks=Tüm depoların yeniden alımı, güncellemesi ve gönderi alım kancalarını yeniden senkronize et
+dashboard.resync_all_hooks_success=Tüm depoların önceden alımı, güncellemesi ve gönderi alımı kancaları başarıyla senkronize edildi.
 dashboard.reinit_missing_repos=Git dosyalarını kaybetmiş tüm depoları yeniden oluştur
 dashboard.reinit_missing_repos_success=Git dosyalarını kaybetmiş tüm depolar başarıyla yeniden oluşturuldu.
 
@@ -1079,13 +1095,14 @@ repos.private=Özel
 repos.watches=İzlemeler
 repos.stars=Yıldızlar
 repos.issues=Sorunlar
-repos.size=Size
+repos.size=Boyut
 
-auths.auth_manage_panel=Yetkilendirme Yönetim Paneli
+auths.auth_sources=Yetkilendirme Kaynakları
 auths.new=Yeni Kaynak Ekle
 auths.name=İsim
 auths.type=Tür
 auths.enabled=Aktifleştirilmiş
+auths.default=Varsayılan
 auths.updated=Güncellendi
 auths.auth_type=Yetki Türü
 auths.auth_name=Yetki İsmi
@@ -1094,20 +1111,21 @@ auths.domain=Alan Adı
 auths.host=Sunucu
 auths.port=Port
 auths.bind_dn=Bağlama DN'i
+auths.bind_dn_helper=Kullanıcı adı için yer tutucu olarak '%s' kullanabilirsiniz, Örneğin DOM\%s
 auths.bind_password=Bağlama Parolası
 auths.bind_password_helper=Uyarı: Bu parola, ham halde bir metin dosyası içerisinde saklanacaktır. Yüksek izinli bir hesap kullanmayın.
 auths.user_base=Kullanıcı Arama Tabanı
 auths.user_dn=Kullanıcı DN'i
 auths.attribute_username=Kullanıcı özelliği
 auths.attribute_username_placeholder=Kullanıcı adı için giriş yapma form alanı kullanmak için boş bırakın.
-auths.attribute_name=First Name Attribute
+auths.attribute_name=İlk Ad Özelliği
 auths.attribute_surname=Soyad özelliği
 auths.attribute_mail=E-posta özelliği
-auths.verify_group_membership=Verify group membership
-auths.group_search_base_dn=Group Search Base DN
-auths.group_filter=Group Filter
-auths.group_attribute_contain_user_list=Group Attribute Containing List of Users
-auths.user_attribute_listed_in_group=User Attribute Listed in Group
+auths.verify_group_membership=Grup üyeliğini doğrula
+auths.group_search_base_dn=Grup Arama Tabanı DN
+auths.group_filter=Grup Filtresi
+auths.group_attribute_contain_user_list=Kullanıcı Listesi İçeren Grup Özelliği
+auths.user_attribute_listed_in_group=Grupta Listelenen Kullanıcı Özelliği
 auths.attributes_in_bind=Bağlı DN tabanındaki özellikleri çek
 auths.filter=Kullanıcı Filtresi
 auths.admin_filter=Yönetici Filtresi
@@ -1121,9 +1139,9 @@ auths.enable_tls=TLS Şifrelemeyi Aktifleştir
 auths.skip_tls_verify=TLS Doğrulamasını Atla
 auths.pam_service_name=PAM Servis Adı
 auths.enable_auto_register=Otomatik Kaydolmayı Aktifleştir
-auths.tips=İpuçları
 auths.edit=Yetkilendirme Ayarlarını Düzenle
 auths.activated=Bu yetkilendirme aktif
+auths.default_auth=Bu kimlik doğrulama varsayılan giriş kaynağıdır
 auths.new_success=Yeni yetkilendirme '%s' başarıyla eklendi.
 auths.update_success=Yetkilendirme ayarları başarıyla güncellendi.
 auths.update=Yetkilendirme Ayarlarını Güncelle
@@ -1132,8 +1150,9 @@ auths.delete_auth_title=Yetkilendirme Silme
 auths.delete_auth_desc=Bu yetkilendirme silinecek. Devam etmek istiyor musunuz?
 auths.still_in_used=Bu yetkilendirme hala bazı kullanıcılar tarafından kullanılıyor. Lütfen öncelikle bunları silin ya da başka oturum açma türlerine çevirin.
 auths.deletion_success=Yetkilendirme başarıyla silindi!
-auths.login_source_exist=Login source '%s' already exists.
+auths.login_source_exist='%s' giriş kaynağı zaten mevcut.
 
+config.not_set=(ayarlı değil)
 config.server_config=Sunucu Yapılandırması
 config.app_name=Uygulama Adı
 config.app_ver=Uygulama Sürümü
@@ -1143,7 +1162,7 @@ config.offline_mode=Çevrim Dışı Modu
 config.disable_router_log=Yönlendirici Log'larını Devre Dışı Bırak
 config.run_user=Çalıştırma Kullanıcısı
 config.run_mode=Çalıştırma Modu
-config.git_version=Git Version
+config.git_version=Git Sürümü
 config.static_file_root_path=Sabit Dosya Kök Yolu
 config.log_file_root_path=Log Dosyası Kök Yolu
 config.reverse_auth_user=Tersine Yetkilendirme Kullanıcısı
@@ -1155,20 +1174,24 @@ config.ssh_domain=Alan Adı
 config.ssh_port=Port
 config.ssh_listen_port=Port'u Dinle
 config.ssh_root_path=Kök Yol
+config.ssh_rewrite_authorized_keys_at_start=Başlangıçta yetkili anahtarları yeniden yaz
 config.ssh_key_test_path=Anahtar Test Yolu
 config.ssh_keygen_path=Keygen ('ssh-keygen') Yolu
 config.ssh_minimum_key_size_check=Minimum Anahtar Uzunluğu Kontrolü
 config.ssh_minimum_key_sizes=Minimum Anahtar Uzunlukları
 
-config.repo_config=Repository Configuration
+config.repo_config=Depo Yapılandırması
 config.repo_root_path=Depo Kök Yolu
 config.script_type=Betik Türü
-config.repo_force_private=Force Private
-config.max_creation_limit=Max Creation Limit
-config.preferred_licenses=Preferred Licenses
-config.disable_http_git=Disable HTTP Git
-config.enable_local_path_migration=Enable Local Path Migration
-config.commits_fetch_concurrency=Commits Fetch Concurrency
+config.repo_force_private=Özel Kuvvet
+config.max_creation_limit=Maksimum Oluşturma Sınırı
+config.preferred_licenses=Tercih Edilen Lisanslar
+config.disable_http_git=HTTP Git'i devre dışı bırak
+config.enable_local_path_migration=Yerel Yol Geçişi Etkinleştir
+config.commits_fetch_concurrency=Eşzamanlılık Alma Taahhüdü
+
+config.http_config=HTTP Yapılandırması
+config.http_access_control_allow_origin=Erişim Kontrolü Kaynağına İzin Ver
 
 config.db_config=Veritabanı Yapılandırması
 config.db_type=Türü
@@ -1199,7 +1222,7 @@ config.skip_tls_verify=TLS Doğrulamasını Atla
 config.mailer_config=Mailer Yapılandırması
 config.mailer_enabled=Aktif
 config.mailer_disable_helo=HELO'yu Devre Dışı Bırak
-config.mailer_name=İsim
+config.mailer_subject_prefix=Konu Öneki
 config.mailer_host=Sunucu
 config.mailer_user=Kullanıcı
 config.send_test_mail=Test E-Postası Gönder
@@ -1227,23 +1250,23 @@ config.cookie_life_time=Çerez Yaşam Zamanı
 config.picture_config=Resim Yapılandırması
 config.picture_service=Resim Servisi
 config.disable_gravatar=Gravatar Hizmet Dışı
-config.enable_federated_avatar=Enable Federated Avatars
+config.enable_federated_avatar=Birleştirilmiş Avatarları Etkinleştir
 
-config.git_config=Git Configuration
-config.git_disable_diff_highlight=Disable Diff Syntax Highlight
-config.git_max_diff_lines=Max Diff Lines (for a single file)
-config.git_max_diff_line_characters=Max Diff Characters (for a single line)
-config.git_max_diff_files=Max Diff Files (to be shown)
-config.git_gc_args=GC Arguments
-config.git_migrate_timeout=Migration Timeout
-config.git_mirror_timeout=Mirror Update Timeout
-config.git_clone_timeout=Clone Operation Timeout
-config.git_pull_timeout=Pull Operation Timeout
-config.git_gc_timeout=GC Operation Timeout
+config.git_config=Git Yapılandırması
+config.git_disable_diff_highlight=Diff İşlemi Sözdizimini Devre Dışı Bırak
+config.git_max_diff_lines=Maksimum Ayırma Hatları (tek bir dosya için)
+config.git_max_diff_line_characters=Maksimum Ayırma Karakterleri(tek bir hat için)
+config.git_max_diff_files=Maksimum Ayırma Dosyaları(gösterilmek için)
+config.git_gc_args=GC Tartışmaları
+config.git_migrate_timeout=Geçiş Zaman Aşımı
+config.git_mirror_timeout=Yansımayı Güncelle Zaman Aşımı
+config.git_clone_timeout=Klon Çalışma Zaman Aşımı
+config.git_pull_timeout=Çekme İşlemi Zaman Aşımı
+config.git_gc_timeout=GC İşlem Zaman Aşımı
 
 config.log_config=Log Yapılandırması
-config.log_mode=Mode
-config.log_options=Options
+config.log_mode=Mod
+config.log_options=Seçenekler
 
 monitor.cron=Cron Görevleri
 monitor.name=İsim
@@ -1272,7 +1295,6 @@ notices.delete_success=Sistem bildirimleri başarıyla silindi.
 
 [action]
 create_repo=depo <a href="%s">%s</a> oluşturuldu
-fork_repo=forked a repository to <a href="%s">%s</a>
 rename_repo=<code>%[1]s</code> olan depo adını <a href="%[2]s">%[3]s</a> buna çevirdi
 commit_repo=<a href="%[1]s">%[4]s</a> zamanında <a href="%[1]s/src/%[2]s">%[3]s</a> buraya push yaptı
 compare_commits=Bu %d işlemeler için karşılaştırmaları görüntüle
@@ -1285,10 +1307,14 @@ create_pull_request=`<a href="%s/pulls/%s">%s#%[2]s</a> değişiklik isteğini o
 close_pull_request=`<a href="%s/pulls/%s">%s#%[2]s</a> değişiklik isteğini kapattı`
 reopen_pull_request=`<a href="%s/pulls/%s">%s#%[2]s</a> değişiklik isteğini tekrar açtı`
 merge_pull_request=`<a href="%s/pulls/%s">%s#%[2]s</a> değişim isteğini birleştirdi`
-create_branch=created new branch <a href="%[1]s/src/%[2]s">%[3]s</a> at <a href="%[1]s">%[4]s</a>
-delete_branch=deleted branch <code>%[2]s</code> at <a href="%[1]s">%[3]s</a>
+create_branch=<a href="%[1]s/src/%[2]s">%[3]s</a> at <a href="%[1]s">%[4]s</a> yeni şubesi oluşturuldu
+delete_branch=<code>%[2]s</code> 'ın <a href="%[1]s">%[3]s</a> şubesi silindi
 push_tag=etiket <a href="%s/src/%s">%[2]s</a> <a href="%[1]s">%[3]s</a>'a itelendi
-delete_tag=deleted tag <code>%[2]s</code> at <a href="%[1]s">%[3]s</a>
+delete_tag=<code>%[2]s</code> 'ın <a href="%[1]s">%[3]s</a> etiketi silindi
+fork_repo=<a href="%s">%s</a> için bir depo çatalladı
+mirror_sync_push=synced commits to <a href="%[1]s/src/%[2]s">%[3]s</a> at <a href="%[1]s">%[4]s</a> from mirror
+mirror_sync_create=synced new reference <a href="%s/src/%s">%[2]s</a> to <a href="%[1]s">%[3]s</a> from mirror
+mirror_sync_delete=synced and deleted reference <code>%[2]s</code> at <a href="%[1]s">%[3]s</a> from mirror
 
 [tool]
 ago=önce

conf/locale/locale_uk-UA.ini

@@ -1,4 +1,4 @@
-app_desc=Зручний сервіс власного Git хостінгу, написаний на Go
+app_desc=Зручний сервіс власного Git хостінгу
 
 home=Головна сторінка
 dashboard=Щиток
@@ -73,7 +73,7 @@ run_user_helper=Користувач мусить мати доступ до к
 domain=Домен
 domain_helper=Це впливає на клонування через SSH.
 ssh_port=SSH порт
-ssh_port_helper=Номер порту, який використовує SSH сервер. Для заборони опції SSH залиште його пустим.
+ssh_port_helper=Номер порту, який використовує SSH сервер. Для заборони опції SSH залиште його порожнім.
 use_builtin_ssh_server=Користуватися вбудованим SSH сервером
 use_builtin_ssh_server_popup=Запустити вбудований SSH сервер для операцій git інакший за системний SSH демон.
 http_port=Порт HTTP
@@ -151,6 +151,8 @@ register_hepler_msg=Вже зареєстровані? Увійдіть зара
 social_register_hepler_msg=Вже зареєстровані? Прив'яжіть зараз!
 disable_register_prompt=Вибачте, реєстрація відключена. Будь ласка, зв'яжіться з адміністратором сайту.
 disable_register_mail=На жаль, підтвердження реєстрації на електрону пошту було відключено.
+auth_source=Джерело автентифікації
+local=Локальний
 remember_me=Запам'ятати мене
 forgot_password=Забув пароль
 forget_password=Забули пароль?
@@ -229,6 +231,7 @@ org_name_been_taken=Назва організаціі вже використо
 team_name_been_taken=Назва команди вже використовується.
 email_been_used=Адреса електронної пошти вже використовується.
 username_password_incorrect=Ім'я користувача або пароль помилкові.
+auth_source_mismatch=Обране джерело автентифікації не асоційовано з користувачем.
 enterred_invalid_repo_name=Переконайтеся, що ви ввели назву сховища правильно.
 enterred_invalid_owner_name=Переконайтеся, що ви ввели ім'я власника правильно.
 enterred_invalid_password=Переконайтеся, що ви ввели пароль правильно.
@@ -316,7 +319,7 @@ add_email_success=Вашу нову адресу електронної пошт
 
 manage_ssh_keys=Керувати ключами SSH
 add_key=Додати ключ
-ssh_desc=Це список ключів SSH, пов'язані з вашим обліковим записом. Видаліть будь-які ключі, які не є вашими.
+ssh_desc=Це список ключів SSH, пов'язані з вашим обліковим записом. Ці ключі дозволять кому завгодно отримувати доступ до вашого репозиторію, тож будьте певні що ви впізнаєте їх.
 ssh_helper=<strong>Потрібна допомога?</strong> Дивіться гід на GitHub з <a href="%s"> генерації ключів SSH</a> або виправлення <a href="%s">типових неполадок SSH</a>.
 add_new_key=Додати SSH ключа
 ssh_key_been_used=Було використано публічний ключ.
@@ -348,6 +351,7 @@ two_factor_or_enter_secret=Або введіть секрет:
 two_factor_then_enter_passcode=Потім введіть пароль:
 two_factor_verify=Перевірити
 two_factor_invalid_passcode=Введений пароль не валідний, будь ласка, спробуйте ще раз!
+two_factor_reused_passcode=Введений пасскод вже було використано. Будь ласка, спробуйте інший!
 two_factor_enable_error=Увімкнення двофакторної автентифікації не вдалося: %v
 two_factor_enable_success=Двофакторну автентифікацію успішно активовано для вашого акаунту!
 two_factor_recovery_codes_title=Пароль відновлення для двофакторної автентифікації
@@ -368,7 +372,7 @@ generate_token=Створити жетон
 generate_token_succees=Новий жетон було створено успішно! Переконайтеся, що Ви скопіювали Ваш новий жетон доступу. Ви не зможете побачити його знову!
 delete_token=Видалити
 access_token_deletion=Видалення токену персонального доступу
-access_token_deletion_desc=Видалення цього токену призведе до видалення усіх пов’язаних доступів додатку. Продовжити?
+access_token_deletion_desc=Видалення цього токену призведе до неможливості доступу усіх пов’язаних додатків. Продовжити?
 delete_token_success=Персональний токен було видалено. Не забудьте перевірити ваш додаток.
 
 orgs.none=Ви не є членом будь-якої організації.
@@ -397,7 +401,7 @@ visiblity_fork_helper=(Зміна даного значення вплине н
 clone_helper=Потрібна допомога у клонуванні? Відвідайте <a target="_blank" href="%s"> допомогу</a>!
 fork_repo=Відгалужити репозиторій
 fork_from=Відгалужити з
-fork_visiblity_helper=Не можна змінити видимість відгалуженого репозиторія
+fork_visiblity_helper=Не можна змінити видимість відгалуженого репозиторія.
 repo_desc=Опис
 repo_lang=Мова
 repo_gitignore_helper=Виберіть .gitignore файли
@@ -410,13 +414,15 @@ create_repo=Створити репозиторій
 default_branch=Головна гілка
 mirror_prune=Підчищати
 mirror_prune_desc=Видалити всі відслідковувані посилання, які більше не існують на віддаленому
-mirror_interval=Інтервал джеркалювання (години)
+mirror_interval=Інтервал дзеркалювання (години)
 mirror_address=Адреса дзеркала
 mirror_address_desc=Будь ласка, вкажіть необхідні дані користувача у адресі.
 mirror_last_synced=Востаннє синхронізовано
 watchers=Спостерігачі
 stargazers=Шанувальники
 forks=Відгалуження
+repo_description_helper=Опис репозиторію. До 512-ти символів довжиною.
+repo_description_length=Доступні символи
 
 form.reach_limit_of_creation=Власник досягнув максимальної кількості у %d створених репозиторіїв.
 form.name_reserved=Назва репозиторія '%s' зарезервовано.
@@ -491,7 +497,7 @@ editor.delete_this_file=Видалити цей файл
 editor.must_have_write_access=Ви повинні мати доступ на запис щоб запропонувати зміни до цього файлу
 editor.file_delete_success=Файл '%s' успішно видалено!
 editor.name_your_file=Дайте назву файлу...
-editor.filename_help=Щоб додати каталог, просто наберіть його ім'я, та натисніть /. Щоб видалити каталог, перейдіь на початок поля й натисніть клавішу backspace.
+editor.filename_help=Щоб додати каталог, просто наберіть його ім'я, та натисніть /. Щоб видалити каталог, перейдіть на початок поля й натисніть клавішу backspace.
 editor.or=Або
 editor.cancel_lower=Скасувати
 editor.commit_changes=Зафіксувати зміни
@@ -514,6 +520,7 @@ editor.file_changed_while_editing=Вміст файлу було змінено
 editor.file_already_exists=Файл на ім'я '%s' вже присутній у репозиторії.
 editor.no_changes_to_show=Нема змін для показу.
 editor.fail_to_update_file=Не вдалося оновити/створити файл '%s' через помилку: %v
+editor.fail_to_delete_file=Не вдалося видалити файл '%s' через помилку: %v
 editor.add_subdir=Додати підкаталогу...
 editor.unable_to_upload_files=Не вдалося завантажити файли до '%s' через помилку: %v
 editor.upload_files_to_dir=Завантажувати файли до '%s'
@@ -616,6 +623,7 @@ pulls.compare_compare=compare
 pulls.filter_branch=Фільтрувати гілку
 pulls.no_results=Результатів не знайдено.
 pulls.nothing_to_compare=Нічого порівнювати, бо base та head гілки однакові.
+pulls.nothing_merge_base=Нічого порівнювати, бо обидві гілки мають повністю різну історію.
 pulls.has_pull_request=`Вже є pull request між ціми двома цілями: <a href="%[1]s/pulls/%[3]d">%[2]s#%[3]d</a>`
 pulls.create=Створити pull request
 pulls.title_desc=хоче злити %[1]d комітів з <code>%[2]s</code> до <code>%[3]s</code>
@@ -631,6 +639,9 @@ pulls.is_checking=Перевірка конфліктів продовжуєть
 pulls.can_auto_merge_desc=Цей запрос може бути влитий автоматично.
 pulls.cannot_auto_merge_desc=Цей запрос не може бути влитий автоматично, тому що він має конфлікти.
 pulls.cannot_auto_merge_helper=Будь ласка влийте вручну щоб врегулювати конфлікти.
+pulls.create_merge_commit=Створити коміт на злиття
+pulls.rebase_before_merging=Перебазувати перед об'єднанням
+pulls.commit_description=Опис коміту
 pulls.merge_pull_request=Влити запрос на злиття
 pulls.open_unmerged_pull_exists=`Ви не можете перевідкрити, бо вже існує запрос на злиття (#%d) з того самого репозиторію, з тією самою інформацією про злиття, та він очікує на влиття.`
 pulls.delete_branch=Видалити гілку
@@ -657,7 +668,7 @@ milestones.cancel=Скасувати
 milestones.modify=Змінити етап
 milestones.edit_success=Зміни в етапі '%s' успішно збережені!
 milestones.deletion=Видалення етапу
-milestones.deletion_desc=Видалення цього єтапу призведе до видалення інформації, його та пов'язаних проблем. Ви справді хочете продовжити?
+milestones.deletion_desc=Видалення цього етапу призведе до видалення інформації, його та пов'язаних проблем. Ви справді хочете продовжити?
 milestones.deletion_success=Етап успішно видалено!
 
 wiki=Wiki
@@ -735,10 +746,12 @@ settings.tracker_issue_style=Стиль найменування задач в
 settings.tracker_issue_style.numeric=Цифровий
 settings.tracker_issue_style.alphanumeric=Буквено-цифровий
 settings.tracker_url_format_desc=Ви можете використовувати заповнювач <code>{user} {repo} {index}</code> для ім'я користувача, назви репозиторію на номеру проблеми.
-settings.pulls_desc=Увімкнути публічні запроси на злиття
+settings.pulls_desc=Увімкнути запити на злиття щоб дозволити внески між репозиторіями й гілками
+settings.pulls.ignore_whitespace=Ігнорувати зміни у пробільних символах
+settings.pulls.allow_rebase_merge=Дозволити перебазування для merge-комітів
 settings.danger_zone=Небезпечна зона
 settings.cannot_fork_to_same_owner=Ви не можете клонувати репозиторій його ж власнику.
-settings.new_owner_has_same_repo=Новий власник вже має репозиторій з такою назвою.
+settings.new_owner_has_same_repo=Новий власник вже має репозиторій з такою назвою. Будь ласка, виберіть іншу.
 settings.convert=Перетворити на звичайний репозиторій
 settings.convert_desc=Ви можете сконвертувати це дзеркало у звичайний репозиторій. Це не може бути повернуто.
 settings.convert_notices_1=- Ця операція перетворить дзеркало на звичайний репозиторій та не зможе бути відмінена.
@@ -756,7 +769,7 @@ settings.wiki_deletion_success=Wiki-інформацію було вдало в
 settings.delete=Видалити цей репозиторій
 settings.delete_desc=Як тільки ви видалите репозиторій, то вже не буде шляху назад. Будь ласка, будьте певні.
 settings.delete_notices_1=- Ця операція <strong>НЕ МОЖЕ</strong> бути відмінена.
-settings.delete_notices_2=- Ця операція остаточно видалить увесь вміст репозиторію, включаючи git-дані, проблеми, коментарі та дозволи співавторів.
+settings.delete_notices_2=- Ця операція остаточно видалить весь вміст цього репозиторію, включаючи дані Git, проблеми, коментарі та дозволи співавторів.
 settings.delete_notices_fork_1=- Усі відгалудження стануть незалежними бісля видалення.
 settings.deletion_success=Репозиторій успішно видалено!
 settings.update_settings_success=Налаштування репозиторію було вдало оновлено.
@@ -814,10 +827,10 @@ settings.event_push=Push
 settings.event_push_desc=Git push до репозиторію
 settings.event_issues=Проблеми
 settings.event_issues_desc=Проблему відкрито, закрито, перевідкрито, відредаговано, призначено, відкріплено, змінено мітку, очищено мітку, створено етап, очищено етап.
-settings.event_issue_comment=Коментар проблеми
-settings.event_issue_comment_desc=Коментар проблеми створено, видалено чи відредаговано.
 settings.event_pull_request=Запити до злиття
 settings.event_pull_request_desc=Запрос на злиття відкрито, закрито, перевідкрито, прикріплено, відкріплено, оновлено мітку, очищено мітку, створено етап, очищено етап або синхронізовано.
+settings.event_issue_comment=Коментар проблеми
+settings.event_issue_comment_desc=Коментар проблеми створено, видалено чи відредаговано.
 settings.event_release=Реліз
 settings.event_release_desc=Реліз опубліковано у репозиторії.
 settings.active=Активний
@@ -830,13 +843,14 @@ settings.recent_deliveries=Недавні розсилки
 settings.hook_type=Тип хуку
 settings.add_slack_hook_desc=Додати <a href="%s">Slack</a>-інтеграцію до вашого репозиторію.
 settings.add_discord_hook_desc=Додати <a href="%s">Discord</a>-інтеграцію до репозиторію.
-settings.slack_token=Жетон
+settings.add_dingtalk_hook_desc=Додати інтеграцію <a href="%s">Dingtalk</a> до вашого репозиторію.
+settings.slack_token=Токен
 settings.slack_domain=Домен
 settings.slack_channel=Канал
 settings.deploy_keys=Ключи для розгортування
-settings.deploy_keys_helper=<b>Common Gotcha!</b> Якщо ви шукаєте куди додати персональний публічний ключ, додайте його до <a href="%s%s">налаштуань вашого аккаунту</a>.
+settings.deploy_keys_helper=<b>Common Gotcha!</b> Якщо ви шукаєте куди додати персональний публічний ключ, додайте його до <a href="%s%s">налаштувань вашого аккаунту</a>.
 settings.add_deploy_key=Додати ключ для розгортування
-settings.deploy_key_desc=Ключи розгортування доступні лише для читання. Це не те саме, що персональний SSH ключ аккаунту.
+settings.deploy_key_desc=Ключі розгортування доступні лише для читання. Це не те саме, що персональний SSH ключ акаунту.
 settings.no_deploy_keys=Ви не додали жодного ключа для розгортування.
 settings.title=Заголовок
 settings.deploy_key_content=Контент
@@ -844,8 +858,10 @@ settings.key_been_used=Вміст ключа розгортування вже
 settings.key_name_used=Ключ розгортування має ім'я яке вже використано.
 settings.add_key_success=Новий ключ розгортування '%s' успішно додано!
 settings.deploy_key_deletion=Видалити ключ для розгортування
-settings.deploy_key_deletion_desc=Видалення цього ключа для розгортування призведе о видалення усіх повїязаних прав до цього репозитрію. Ви справді бажаєти продовжити?
+settings.deploy_key_deletion_desc=Видалення цього ключа для розгортування призведе о видалення усіх пов'язаних прав до цього репозиторію. Ви справді бажаєте продовжити?
 settings.deploy_key_deletion_success=Ключі для розгортування було успішно видалено!
+settings.description_desc=Опис репозиторію. До 512-ти символів довжиною.
+settings.description_length=Доступні символи
 
 diff.browse_source=Переглянути джерело
 diff.parent=батько
@@ -1081,11 +1097,12 @@ repos.stars=У обраному
 repos.issues=Питання
 repos.size=Розмір
 
-auths.auth_manage_panel=Керування автентифікацій
+auths.auth_sources=Джерела автентифікації
 auths.new=Додати нове джерело
 auths.name=Назва
 auths.type=Тип
 auths.enabled=Увімкнено
+auths.default=За замовчанням
 auths.updated=Оновлено
 auths.auth_type=Тип автентифікації
 auths.auth_name=Назва автентифікації
@@ -1094,6 +1111,7 @@ auths.domain=Домен
 auths.host=Хост
 auths.port=Порт
 auths.bind_dn=Прив'язати DN
+auths.bind_dn_helper=Ви можете використовувати '%s' як шаблон для імені користувача, напр. DOM\%s
 auths.bind_password=Прив'язати пароль
 auths.bind_password_helper=Увага: Цей пароль зберігається як звичайний текст. Не використовуйте профіль з високими повноваженнями.
 auths.user_base=База пошуку користувачів
@@ -1116,14 +1134,14 @@ auths.smtp_auth=Тип автентифікації SMTP
 auths.smtphost=SMTP хост
 auths.smtpport=SMTP порт
 auths.allowed_domains=Дозволені домени
-auths.allowed_domains_helper=Залиште пустим щоб дозволити будь-які домени. Якщо доменів декілька - розділить їх комами ','.
+auths.allowed_domains_helper=Залиште порожнім щоб дозволити будь-які домени. Якщо доменів декілька - розділить їх комами ','.
 auths.enable_tls=Увімкнути TLS-шифрування
 auths.skip_tls_verify=Пропустити перевірку TLS
 auths.pam_service_name=Ім'я служби PAM
 auths.enable_auto_register=Увімкнути автоматичну реєстрацію
-auths.tips=Поради
 auths.edit=Редагувати налаштування автентифікації
 auths.activated=Цю автентифікацію активовано
+auths.default_auth=Це метод автентифікації за замовчанням
 auths.new_success=Нову автентифікацію '%s' було успішно додано.
 auths.update_success=Налаштування автентифікації було успішно оновлено.
 auths.update=Оновити налаштування автентифікації
@@ -1134,6 +1152,7 @@ auths.still_in_used=Цю автентифікацію ще використов
 auths.deletion_success=Автентивікацію було успішно видалено!
 auths.login_source_exist=Джерело входу '%s' вже існує.
 
+config.not_set=(не встановлено)
 config.server_config=Конфігурація сервера
 config.app_name=Назва програми
 config.app_ver=Версія програми
@@ -1155,6 +1174,7 @@ config.ssh_domain=Домен
 config.ssh_port=Порт
 config.ssh_listen_port=Порт що прослуховується
 config.ssh_root_path=Шлях до кореню
+config.ssh_rewrite_authorized_keys_at_start=Переписати authorized_keys на початку
 config.ssh_key_test_path=Шлях до тестових ключів
 config.ssh_keygen_path=Шлях до генератора ключів ('ssh-keygen')
 config.ssh_minimum_key_size_check=Мінімальний розмір ключа перевірки
@@ -1170,6 +1190,9 @@ config.disable_http_git=Вимкнути HTTP Git
 config.enable_local_path_migration=Увімкнути міграцію з локального шляху
 config.commits_fetch_concurrency=Запросити коміти конкурентно
 
+config.http_config=Налаштування HTTP
+config.http_access_control_allow_origin=Контроль доступу дозволяє Origin
+
 config.db_config=Налаштування бази даних
 config.db_type=Тип
 config.db_host=Хост
@@ -1199,7 +1222,7 @@ config.skip_tls_verify=Пропустити перевірку TLS
 config.mailer_config=Налаштування пошти
 config.mailer_enabled=Увімкнено
 config.mailer_disable_helo=Вимкнути HELO
-config.mailer_name=Ім’я
+config.mailer_subject_prefix=Префікс теми
 config.mailer_host=Хост
 config.mailer_user=Користувач
 config.send_test_mail=Відправити тестового листа
@@ -1272,7 +1295,6 @@ notices.delete_success=Системні повідомлення було усп
 
 [action]
 create_repo=створено репозиторій <a href="%s">%s</a>
-fork_repo=відгалуджено репозиторій у <a href="%s">%s</a>
 rename_repo=репозиторій перейменовано з <code>%[1]s</code> на <a href="%[2]s">%[3]s</a>
 commit_repo=запушено до <a href="%[1]s/src/%[2]s">%[3]s</a> у <a href="%[1]s">%[4]s</a>
 compare_commits=Перегляд порівняння для цих %d комітів
@@ -1289,6 +1311,10 @@ create_branch=створено нову гілку <a href="%[1]s/src/%[2]s">%[3
 delete_branch=видалено гілку <code>%[2]s</code> у <a href="%[1]s">%[3]s</a>
 push_tag=заштовхнуто тег <a href="%s/src/%s">%[2]s</a> до <a href="%[1]s">%[3]s</a>
 delete_tag=видалено мітку <code>%[2]s</code> у <a href="%[1]s">%[3]s</a>
+fork_repo=відгалуджено репозиторій у <a href="%s">%s</a>
+mirror_sync_push=синхронізовано коміт <a href="%[1]s/src/%[2]s">%[3]s</a> в <a href="%[1]s">%[4]s</a> із дзеркала
+mirror_sync_create=синхронізовано нове посилання <a href="%s/src/%s">%[2]s</a> до <a href="%[1]s">%[3]s</a> із дзеркала
+mirror_sync_delete=синхронізовано й видалено посилання <code>%[2]s</code> в <a href="%[1]s">%[3]s</a> із дзеркала
 
 [tool]
 ago=тому

conf/locale/locale_zh-CN.ini

@@ -2,7 +2,7 @@ app_desc=一款极易搭建的自助 Git 服务
 
 home=首页
 dashboard=控制面板
-explore=探索
+explore=发现
 help=帮助
 sign_in=登录
 sign_out=退出
@@ -151,6 +151,8 @@ register_hepler_msg=已经注册？立即登录！
 social_register_hepler_msg=已经注册？立即绑定！
 disable_register_prompt=对不起，注册功能已被关闭。请联系网站管理员。
 disable_register_mail=对不起，注册邮箱确认功能已被关闭。
+auth_source=认证源
+local=本地
 remember_me=记住登录
 forgot_password=忘记密码
 forget_password=忘记密码？
@@ -229,6 +231,7 @@ org_name_been_taken=组织名称已经被占用。
 team_name_been_taken=团队名称已经被占用。
 email_been_used=邮箱地址已经被使用。
 username_password_incorrect=用户名或密码不正确。
+auth_source_mismatch=该用户未与所选择的认证源进行关联
 enterred_invalid_repo_name=请检查您输入的仓库名称是正确。
 enterred_invalid_owner_name=请检查您输入的新所有者用户名是否正确。
 enterred_invalid_password=请检查您输入的密码是否正确。
@@ -348,6 +351,7 @@ two_factor_or_enter_secret=或者直接输入密钥：
 two_factor_then_enter_passcode=然后输入动态令牌：
 two_factor_verify=验证令牌
 two_factor_invalid_passcode=您输入的动态令牌无效，请重试！
+two_factor_reused_passcode=您输入的令牌已经被使用，请等待数秒后尝试新的令牌！
 two_factor_enable_error=启用两步验证失败：%v
 two_factor_enable_success=两步验证登录启用成功！
 two_factor_recovery_codes_title=两步验证恢复密钥
@@ -417,6 +421,8 @@ mirror_last_synced=上次同步时间：
 watchers=关注者
 stargazers=称赞者
 forks=派生仓库
+repo_description_helper=请输入仓库描述，最多为 512 个字符
+repo_description_length=剩余字符数
 
 form.reach_limit_of_creation=该用户已经达到允许创建 %d 个仓库的最大上限。
 form.name_reserved=仓库名称 '%s' 是被保留的。
@@ -514,6 +520,7 @@ editor.file_changed_while_editing=文件内容在您进行编辑时已经发生
 editor.file_already_exists=此仓库已经存在名为 '%s' 的文件。
 editor.no_changes_to_show=没有可以显示的变更。
 editor.fail_to_update_file=更新/创建文件 '%s' 时发生错误：%v
+editor.fail_to_delete_file=删除文件 '%s' 时发生错误: %v
 editor.add_subdir=添加子目录...
 editor.unable_to_upload_files=上传文件至 '%s' 时发生错误：%v
 editor.upload_files_to_dir=上传文件至 '%s'
@@ -569,7 +576,7 @@ issues.filter_sort.recentupdate=最近更新
 issues.filter_sort.leastupdate=最少更新
 issues.filter_sort.mostcomment=最多评论
 issues.filter_sort.leastcomment=最少评论
-issues.opened_by=由 <a href="%[2]s">%[3]s</a> 与 %[1]s创建
+issues.opened_by=由 <a href="%[2]s">%[3]s</a> 于 %[1]s创建
 issues.opened_by_fake=由 %[2]s 于 %[1]s创建
 issues.previous=上一页
 issues.next=下一页
@@ -590,7 +597,7 @@ issues.commit_ref_at=`在代码提交 <a id="%[1]s" href="#%[1]s">%[2]s</a> 中
 issues.poster=发布者
 issues.collaborator=协作者
 issues.owner=所有者
-issues.sign_in_require_desc=<a href="%s">登陆</a> 并参与到对话中。
+issues.sign_in_require_desc=<a href="%s">登录</a> 并参与到对话中。
 issues.edit=编辑
 issues.cancel=取消
 issues.save=保存
@@ -616,6 +623,7 @@ pulls.compare_compare=对比分支
 pulls.filter_branch=过滤分支
 pulls.no_results=未找到结果
 pulls.nothing_to_compare=基准和对比分支代码已经同步，无需进行对比。
+pulls.nothing_merge_base=由于两个分支各自拥有完全不同的提交历史，因此无法进行比较。
 pulls.has_pull_request=`已经存在目标分支的合并请求：<a href="%[1]s/pulls/%[3]d">%[2]s#%[3]d</a>`
 pulls.create=创建合并请求
 pulls.title_desc=请求将 %[1]d 次代码提交从 <code>%[2]s</code> 合并至 <code>%[3]s</code>
@@ -631,6 +639,9 @@ pulls.is_checking=该合并请求正在进行冲突检查，请稍后再刷新
 pulls.can_auto_merge_desc=该合并请求可以进行自动合并操作。
 pulls.cannot_auto_merge_desc=该合并请求存在冲突，无法进行自动合并操作。
 pulls.cannot_auto_merge_helper=请手动拉取代码变更以解决冲突。
+pulls.create_merge_commit=创建一个新的合并提交
+pulls.rebase_before_merging=合并前先进行衍合
+pulls.commit_description=提交说明
 pulls.merge_pull_request=合并请求
 pulls.open_unmerged_pull_exists=`由于已经存在来自相同仓库和合并信息的未合并请求（#%d），您无法执行重新开启操作。`
 pulls.delete_branch=删除分支
@@ -735,7 +746,9 @@ settings.tracker_issue_style=外部工单管理系统命名风格：
 settings.tracker_issue_style.numeric=纯数字形式
 settings.tracker_issue_style.alphanumeric=英文字母数字组合形式
 settings.tracker_url_format_desc=您可以使用 <code>{user} {repo} {index}</code> 分别作为用户名、仓库名和工单索引的占位符。
-settings.pulls_desc=启用合并请求以接受社区贡献
+settings.pulls_desc=启用合并请求以接受来自其它仓库或分支的贡献
+settings.pulls.ignore_whitespace=忽略空白符号的更改
+settings.pulls.allow_rebase_merge=允许在合并提交时使用衍合
 settings.danger_zone=危险操作区
 settings.cannot_fork_to_same_owner=您不能派生仓库到其当前的所有者。
 settings.new_owner_has_same_repo=新的仓库拥有者已经存在同名仓库！
@@ -756,7 +769,7 @@ settings.wiki_deletion_success=仓库 Wiki 数据清除成功！
 settings.delete=删除本仓库
 settings.delete_desc=删除仓库操作不可逆转，请三思而后行。
 settings.delete_notices_1=- 此操作 <strong>不可以</strong> 被回滚。
-settings.delete_notices_2=- 此操作将永久删除该仓库，包括 Git 数据、 工单、 评论和协作者的操作权限。
+settings.delete_notices_2=- 此操作将永久删除该仓库，包括 Git 数据、工单、评论和协作者的操作权限。
 settings.delete_notices_fork_1=- 删除完成后所有的派生仓库都将转换为独立的仓库。
 settings.deletion_success=仓库删除成功！
 settings.update_settings_success=仓库设置更新成功！
@@ -814,10 +827,10 @@ settings.event_push=推送
 settings.event_push_desc=Git 仓库推送
 settings.event_issues=工单
 settings.event_issues_desc=工单被开启、关闭、重新开启、编辑、指派、取消指派、更新标签、清除标签、设置里程碑或取消设置里程碑
-settings.event_issue_comment=工单评论
-settings.event_issue_comment_desc=工单评论被创建、编辑和删除
 settings.event_pull_request=合并请求
 settings.event_pull_request_desc=合并请求被开启、关闭、重新开启、编辑、指派、取消指派、更新标签、清除标签、设置里程碑、取消设置里程碑或代码同步
+settings.event_issue_comment=工单评论
+settings.event_issue_comment_desc=工单评论被创建、编辑和删除
 settings.event_release=版本发布
 settings.event_release_desc=仓库发布新的版本
 settings.active=是否激活
@@ -830,6 +843,7 @@ settings.recent_deliveries=最近推送记录
 settings.hook_type=钩子类型
 settings.add_slack_hook_desc=为您的仓库增加 <a href="%s">Slack</a> 集成。
 settings.add_discord_hook_desc=为您的仓库增加 <a href="%s">Discord</a> 集成。
+settings.add_dingtalk_hook_desc=为您的仓库增加 <a href="%s">钉钉</a> 集成。
 settings.slack_token=令牌
 settings.slack_domain=域名
 settings.slack_channel=频道
@@ -846,6 +860,8 @@ settings.add_key_success=新的部署密钥 '%s' 添加成功！
 settings.deploy_key_deletion=删除部署密钥
 settings.deploy_key_deletion_desc=删除该部署密钥会移除本仓库所以相关的操作权限。是否继续？
 settings.deploy_key_deletion_success=删除部署密钥成功！
+settings.description_desc=请输入仓库描述，最多为 512 个字符
+settings.description_length=剩余字符数
 
 diff.browse_source=浏览代码
 diff.parent=父节点
@@ -976,7 +992,7 @@ dashboard=控制面板
 users=用户管理
 organizations=组织管理
 repositories=仓库管理
-authentication=授权认证管理
+authentication=认证源管理
 config=应用配置管理
 notices=系统提示管理
 monitor=应用监控面板
@@ -1081,11 +1097,12 @@ repos.stars=点赞数
 repos.issues=工单数
 repos.size=用量
 
-auths.auth_manage_panel=认证管理面板
+auths.auth_sources=认证源
 auths.new=添加新的源
 auths.name=认证名称
 auths.type=认证类型
 auths.enabled=已启用
+auths.default=默认
 auths.updated=最后更新时间
 auths.auth_type=认证类型
 auths.auth_name=认证名称
@@ -1094,6 +1111,7 @@ auths.domain=域名
 auths.host=主机地址
 auths.port=主机端口
 auths.bind_dn=绑定 DN
+auths.bind_dn_helper=可以使用 '%s' 作为用户名的占位符，例如：DOM\%s
 auths.bind_password=绑定密码
 auths.bind_password_helper=警告：该密码将会以明文的形式保存在数据库中。请不要使用拥有高权限的帐户！
 auths.user_base=用户搜索基准
@@ -1121,9 +1139,9 @@ auths.enable_tls=启用 TLS 加密
 auths.skip_tls_verify=忽略 TLS 验证
 auths.pam_service_name=PAM 服务名称
 auths.enable_auto_register=允许授权用户自动注册
-auths.tips=帮助提示
 auths.edit=编辑认证设置
 auths.activated=该授权认证已经启用
+auths.default_auth=该授权认证将作为默认登录源
 auths.new_success=新的授权源 "%s" 添加成功！
 auths.update_success=认证设置更新成功！
 auths.update=更新认证设置
@@ -1134,6 +1152,7 @@ auths.still_in_used=此认证仍旧与一些用户有关联，请先删除或者
 auths.deletion_success=授权源删除成功！
 auths.login_source_exist=登录源 '%s' 已存在。
 
+config.not_set=(未设置)
 config.server_config=服务器配置
 config.app_name=应用名称
 config.app_ver=应用版本
@@ -1155,6 +1174,7 @@ config.ssh_domain=域名
 config.ssh_port=端口
 config.ssh_listen_port=监听端口
 config.ssh_root_path=根目录
+config.ssh_rewrite_authorized_keys_at_start=在启动时重写 authorized_keys 文件
 config.ssh_key_test_path=密钥测试路径
 config.ssh_keygen_path=密钥生成器（'ssh-keygen'）路径
 config.ssh_minimum_key_size_check=密钥最小长度检查
@@ -1170,6 +1190,9 @@ config.disable_http_git=禁用 HTTP Git 操作
 config.enable_local_path_migration=启用本地路径迁移
 config.commits_fetch_concurrency=代码提交拉取并发量
 
+config.http_config=HTTP 配置
+config.http_access_control_allow_origin=Access Control Allow Origin
+
 config.db_config=数据库配置
 config.db_type=数据库类型
 config.db_host=主机地址
@@ -1199,7 +1222,7 @@ config.skip_tls_verify=忽略 TLS 验证
 config.mailer_config=邮件配置
 config.mailer_enabled=启用服务
 config.mailer_disable_helo=禁用 HELO 操作
-config.mailer_name=发送者名称
+config.mailer_subject_prefix=主题前缀
 config.mailer_host=邮件主机地址
 config.mailer_user=发送者帐号
 config.send_test_mail=发送测试邮件
@@ -1272,7 +1295,6 @@ notices.delete_success=系统提示删除成功！
 
 [action]
 create_repo=创建了仓库 <a href="%s">%s</a>
-fork_repo=派生了仓库 <a href="%s">%s</a>
 rename_repo=重命名仓库 <code>%[1]s</code> 为 <a href="%[2]s">%[3]s</a>
 commit_repo=推送了 <a href="%[1]s/src/%[2]s">%[3]s</a> 分支的代码到 <a href="%[1]s">%[4]s</a>
 compare_commits=对比 %d 次代码提交
@@ -1289,6 +1311,10 @@ create_branch=创建了新的分支 <a href="%[1]s/src/%[2]s">%[3]s</a> 到 <a h
 delete_branch=删除了 <a href="%[1]s">%[3]s</a> 的分支 <code>%[2]s</code>
 push_tag=推送了标签 <a href="%s/src/%s">%[2]s</a> 到 <a href="%[1]s">%[3]s</a>
 delete_tag=删除了 <a href="%[1]s">%[3]s</a> 的标签 <code>%[2]s</code>
+fork_repo=派生了仓库 <a href="%s">%s</a>
+mirror_sync_push=从镜像同步了 <a href="%[1]s/src/%[2]s">%[3]s</a> 分支的代码到 <a href="%[1]s">%[4]s</a>
+mirror_sync_create=从镜像同步了新的引用 <a href="%s/src/%s">%[2]s</a> 到 <a href="%[1]s">%[3]s</a>
+mirror_sync_delete=从镜像同步并从 <a href="%[1]s">%[3]s</a>  删除了引用 <code>%[2]s</code>
 
 [tool]
 ago=之前

conf/locale/locale_zh-HK.ini

@@ -151,6 +151,8 @@ register_hepler_msg=已經註冊？立即登錄！
 social_register_hepler_msg=已經註冊？立即綁定！
 disable_register_prompt=對不起，註冊功能已被關閉。請聯系網站管理員。
 disable_register_mail=對不起，註冊郵箱確認功能已被關閉。
+auth_source=Authentication Source
+local=Local
 remember_me=記住登錄
 forgot_password=忘記密碼
 forget_password=忘記密碼？
@@ -207,7 +209,7 @@ CommitSummary=Commit summary
 CommitMessage=Commit message
 CommitChoice=Commit choice
 TreeName=File path
-Content=Content
+Content=內容
 
 require_error=不能為空。
 alpha_dash_error=必須為英文字母、阿拉伯數字或橫線（-_）。
@@ -229,6 +231,7 @@ org_name_been_taken=組織名稱已經被佔用。
 team_name_been_taken=團隊名稱已經被佔用。
 email_been_used=郵箱地址已經被使用。
 username_password_incorrect=用戶名或密碼不正確。
+auth_source_mismatch=The authentication source selected is not associated with the user.
 enterred_invalid_repo_name=請檢查您輸入的倉庫名稱是正確。
 enterred_invalid_owner_name=請檢查您輸入的新所有者用戶名是否正確。
 enterred_invalid_password=請檢查您輸入的密碼是否正確。
@@ -262,10 +265,10 @@ form.name_pattern_not_allowed=用戶名不允許 '%s' 的格式。
 [settings]
 profile=個人信息
 password=修改密碼
-avatar=Avatar
+avatar=頭像
 ssh_keys=管理 SSH 密鑰
-security=Security
-repos=Repositories
+security=安全
+repos=倉庫
 orgs=管理組織
 applications=管理授權應用
 delete=刪除帳戶
@@ -335,19 +338,20 @@ key_state_desc=該密鑰在 7 天內被使用過
 token_state_desc=此token在過去七天內曾經被使用過
 
 two_factor=Two-factor Authentication
-two_factor_status=Status:
-two_factor_on=On
-two_factor_off=Off
-two_factor_enable=Enable
-two_factor_disable=Disable
+two_factor_status=狀態：
+two_factor_on=開啟
+two_factor_off=關閉
+two_factor_enable=啟用
+two_factor_disable=禁用
 two_factor_view_recovery_codes=View and save <a href="%s%s">your recovery codes</a> in a safe place. You can use them as passcode if you lose access to your authentication application.
 two_factor_http=For HTTP/HTTPS operations, you are no longer able to use plain username and password. Please create and use <a href="%[1]s%[2]s">Personal Access Token</a> as your credential, e.g. <code>%[3]s</code>.
 two_factor_enable_title=Enable Two-factor Authentication
 two_factor_scan_qr=Please use your authentication application to scan the image:
-two_factor_or_enter_secret=Or enter the secret:
-two_factor_then_enter_passcode=Then enter passcode:
-two_factor_verify=Verify
+two_factor_or_enter_secret=或者輸入密碼：
+two_factor_then_enter_passcode=然後輸入驗證碼：
+two_factor_verify=驗證
 two_factor_invalid_passcode=The passcode you entered is not valid, please try again!
+two_factor_reused_passcode=The passcode you entered has already been used, please try another one!
 two_factor_enable_error=Enable Two-factor authentication failed: %v
 two_factor_enable_success=Two-factor authentication has enabled for your account successfully!
 two_factor_recovery_codes_title=Two-factor Authentication Recovery Codes
@@ -417,6 +421,8 @@ mirror_last_synced=Last Synced
 watchers=關注者
 stargazers=稱讚者
 forks=派生倉庫
+repo_description_helper=Description of repository. Maximum 512 characters length.
+repo_description_length=Available characters
 
 form.reach_limit_of_creation=擁有者已達到儲存庫最大的新增上限 %d。
 form.name_reserved=倉庫名稱 '%s' 是被保留的。
@@ -514,6 +520,7 @@ editor.file_changed_while_editing=File content has been changed since you starte
 editor.file_already_exists=A file with name '%s' already exists in this repository.
 editor.no_changes_to_show=There are no changes to show.
 editor.fail_to_update_file=Failed to update/create file '%s' with error: %v
+editor.fail_to_delete_file=Failed to delete file '%s' with error: %v
 editor.add_subdir=Add subdirectory...
 editor.unable_to_upload_files=Failed to upload files to '%s' with error: %v
 editor.upload_files_to_dir=Upload files to '%s'
@@ -616,6 +623,7 @@ pulls.compare_compare=對比文件變化
 pulls.filter_branch=過濾分支
 pulls.no_results=未找到結果
 pulls.nothing_to_compare=基準和對比分支代碼已經同步，無需進行對比。
+pulls.nothing_merge_base=There is nothing to compare because two branches have completely different history.
 pulls.has_pull_request=`已經存在目標分支的合併請求：<a href="%[1]s/pulls/%[3]d">%[2]s#%[3]d</a>`
 pulls.create=創建合併請求
 pulls.title_desc=請求將 %[1]d 次代碼提交從 <code>%[2]s</code> 合併至 <code>%[3]s</code>
@@ -631,6 +639,9 @@ pulls.is_checking=該合併請求正在進行衝突檢查，請稍後再刷新
 pulls.can_auto_merge_desc=這個拉請求可以自動合併。
 pulls.cannot_auto_merge_desc=由於存在衝突，不能自動合併這推送請求。
 pulls.cannot_auto_merge_helper=請手動合併來解決衝突。
+pulls.create_merge_commit=Create a merge commit
+pulls.rebase_before_merging=Rebase before merging
+pulls.commit_description=Commit Description
 pulls.merge_pull_request=合併請求
 pulls.open_unmerged_pull_exists=`由於已經存在來自相同倉庫和合併信息的未合併請求（#%d），您無法執行重新開啟操作。`
 pulls.delete_branch=Delete Branch
@@ -735,7 +746,9 @@ settings.tracker_issue_style=External Issue Tracker Naming Style:
 settings.tracker_issue_style.numeric=Numeric
 settings.tracker_issue_style.alphanumeric=Alphanumeric
 settings.tracker_url_format_desc=您可以使用 <code>{user} {repo} {index}</code> 分別作為用戶名、倉庫名和問題索引的占位符。
-settings.pulls_desc=啟用合併請求以接受社區貢獻
+settings.pulls_desc=Enable pull requests to accept contributions between repositories and branches
+settings.pulls.ignore_whitespace=Ignore changes in whitespace
+settings.pulls.allow_rebase_merge=Allow use rebase to merge commits
 settings.danger_zone=危險操作區
 settings.cannot_fork_to_same_owner=You cannot fork a repository to its original owner.
 settings.new_owner_has_same_repo=新的倉庫擁有者已經存在同名倉庫！
@@ -756,7 +769,7 @@ settings.wiki_deletion_success=Repository wiki data have been erased successfull
 settings.delete=刪除本倉庫
 settings.delete_desc=刪除倉庫操作不可逆轉，請三思而後行。
 settings.delete_notices_1=- 此操作 <strong>不可以</strong> 被回滾。
-settings.delete_notices_2=- 此操作將永久刪除該倉庫，包括 Git 數據、 問題、 評論和協作者的操作權限。
+settings.delete_notices_2=- This operation will permanently delete everything in this repository, including Git data, issues, comments and collaborator access.
 settings.delete_notices_fork_1=- All forks will become independent after deletion.
 settings.deletion_success=倉庫刪除成功！
 settings.update_settings_success=倉庫設置更新成功！
@@ -814,10 +827,10 @@ settings.event_push=推送
 settings.event_push_desc=Git 倉庫推送
 settings.event_issues=Issues
 settings.event_issues_desc=Issue opened, closed, reopened, edited, assigned, unassigned, label updated, label cleared, milestoned, or demilestoned.
-settings.event_issue_comment=Issue Comment
-settings.event_issue_comment_desc=Issue comment created, edited, or deleted.
 settings.event_pull_request=Pull Request
 settings.event_pull_request_desc=Pull request opened, closed, reopened, edited, assigned, unassigned, label updated, label cleared, milestoned, demilestoned, or synchronized.
+settings.event_issue_comment=Issue Comment
+settings.event_issue_comment_desc=Issue comment created, edited, or deleted.
 settings.event_release=Release
 settings.event_release_desc=Release published in a repository.
 settings.active=是否激活
@@ -830,6 +843,7 @@ settings.recent_deliveries=最近推送記錄
 settings.hook_type=鉤子類型
 settings.add_slack_hook_desc=為您的倉庫增加 <a href="%s">Slack</a> 集成。
 settings.add_discord_hook_desc=Add <a href="%s">Discord</a> integration to your repository.
+settings.add_dingtalk_hook_desc=Add <a href="%s">Dingtalk</a> integration to your repository.
 settings.slack_token=令牌
 settings.slack_domain=域名
 settings.slack_channel=頻道
@@ -846,6 +860,8 @@ settings.add_key_success=新的部署密鑰 '%s' 添加成功！
 settings.deploy_key_deletion=刪除部署密鑰
 settings.deploy_key_deletion_desc=刪除該部署密鑰會移除本倉庫所有相關的操作權限。是否繼續？
 settings.deploy_key_deletion_success=刪除部署密鑰成功！
+settings.description_desc=Description of repository. Maximum 512 characters length.
+settings.description_length=Available characters
 
 diff.browse_source=瀏覽代碼
 diff.parent=父節點
@@ -1081,11 +1097,12 @@ repos.stars=讚好數
 repos.issues=問題數
 repos.size=Size
 
-auths.auth_manage_panel=認證管理面板
+auths.auth_sources=Authentication Sources
 auths.new=添加新認證源
 auths.name=認證名稱
 auths.type=認證類型
 auths.enabled=已啟用
+auths.default=Default
 auths.updated=最後更新時間
 auths.auth_type=認證類型
 auths.auth_name=認證名稱
@@ -1094,6 +1111,7 @@ auths.domain=域名
 auths.host=主機地址
 auths.port=主機端口
 auths.bind_dn=綁定DN
+auths.bind_dn_helper=You can use '%s' as placeholder for username, e.g. DOM\%s
 auths.bind_password=綁定密碼
 auths.bind_password_helper=警告：該密碼將會以明文的形式保存在數據庫中。請不要使用擁有高權限的帳戶！
 auths.user_base=用戶搜索基準
@@ -1121,9 +1139,9 @@ auths.enable_tls=啟用 TLS 加密
 auths.skip_tls_verify=忽略 TLS 驗證
 auths.pam_service_name=PAM 服務名稱
 auths.enable_auto_register=允許授權用戶自動註冊
-auths.tips=幫助提示
 auths.edit=編輯認證設置
 auths.activated=該授權認證已經啟用
+auths.default_auth=This authentication is default login source
 auths.new_success=新的認證源 "%s" 添加成功！
 auths.update_success=認證設置更新成功！
 auths.update=更新認證設置
@@ -1134,6 +1152,7 @@ auths.still_in_used=This authentication is still used by some users, please dele
 auths.deletion_success=認證源刪除成功！
 auths.login_source_exist=Login source '%s' already exists.
 
+config.not_set=(not set)
 config.server_config=服務器配置
 config.app_name=應用名稱
 config.app_ver=應用版本
@@ -1155,6 +1174,7 @@ config.ssh_domain=Domain
 config.ssh_port=埠
 config.ssh_listen_port=監聽埠
 config.ssh_root_path=根路徑
+config.ssh_rewrite_authorized_keys_at_start=Rewrite authorized_keys At Start
 config.ssh_key_test_path=金鑰測試路徑
 config.ssh_keygen_path=金鑰產生 (' ssh-keygen ') 路徑
 config.ssh_minimum_key_size_check=金鑰最小大小檢查
@@ -1170,6 +1190,9 @@ config.disable_http_git=Disable HTTP Git
 config.enable_local_path_migration=Enable Local Path Migration
 config.commits_fetch_concurrency=Commits Fetch Concurrency
 
+config.http_config=HTTP Configuration
+config.http_access_control_allow_origin=Access Control Allow Origin
+
 config.db_config=數據庫配置
 config.db_type=數據庫類型
 config.db_host=主機地址
@@ -1199,7 +1222,7 @@ config.skip_tls_verify=忽略 TLS 驗證
 config.mailer_config=郵件配置
 config.mailer_enabled=啟用服務
 config.mailer_disable_helo=禁用 HELO 操作
-config.mailer_name=發送者名稱
+config.mailer_subject_prefix=Subject Prefix
 config.mailer_host=郵件主機地址
 config.mailer_user=發送者帳號
 config.send_test_mail=發送測試郵件
@@ -1272,7 +1295,6 @@ notices.delete_success=系統提示刪除成功！
 
 [action]
 create_repo=創建了儲存庫 <a href="%s">%s</a>
-fork_repo=forked a repository to <a href="%s">%s</a>
 rename_repo=重新命名倉庫 <code>%[1]s</code> 為 <a href="%[2]s">%[3]s</a>
 commit_repo=推送了 <a href="%[1]s/src/%[2]s">%[3]s</a> 分支的代碼到 <a href="%[1]s">%[4]s</a>
 compare_commits=查看 %d 次提交的內容比對
@@ -1289,6 +1311,10 @@ create_branch=created new branch <a href="%[1]s/src/%[2]s">%[3]s</a> at <a href=
 delete_branch=deleted branch <code>%[2]s</code> at <a href="%[1]s">%[3]s</a>
 push_tag=推送了標籤 <a href="%s/src/%s">%[2]s</a> 到 <a href="%[1]s">%[3]s</a>
 delete_tag=deleted tag <code>%[2]s</code> at <a href="%[1]s">%[3]s</a>
+fork_repo=forked a repository to <a href="%s">%s</a>
+mirror_sync_push=synced commits to <a href="%[1]s/src/%[2]s">%[3]s</a> at <a href="%[1]s">%[4]s</a> from mirror
+mirror_sync_create=synced new reference <a href="%s/src/%s">%[2]s</a> to <a href="%[1]s">%[3]s</a> from mirror
+mirror_sync_delete=synced and deleted reference <code>%[2]s</code> at <a href="%[1]s">%[3]s</a> from mirror
 
 [tool]
 ago=之前

conf/locale/locale_zh-TW.ini

@@ -1,7 +1,7 @@
-app_desc=基於 Go 語言的自助 Git 服務
+app_desc=一款極易搭建的自助 Git 服務
 
 home=首頁
-dashboard=控制面版
+dashboard=控制面板
 explore=探索
 help=說明
 sign_in=登入
@@ -35,7 +35,7 @@ manage_org=管理組織
 admin_panel=管理面板
 account_settings=帳號設定
 settings=設定
-your_profile=個人資料
+your_profile=個人資訊
 your_settings=用戶設定
 
 activities=活動
@@ -82,8 +82,8 @@ app_url=應用程式網址
 app_url_helper=該設置影響 HTTP/HTTPS 複製地址和一些郵箱中的連結。
 log_root_path=日誌路徑
 log_root_path_helper=寫入日誌檔目錄
-enable_console_mode=Enable Console Mode
-enable_console_mode_popup=In addition to file mode, also print logs to console.
+enable_console_mode=開啟主控台模式
+enable_console_mode_popup=除了使用檔案模式之外, 還要將日誌列印到控制台。
 
 optional_title=可選設置
 email_title=電子郵件服務設定
@@ -119,7 +119,7 @@ sqlite3_not_available=您所使用的發行版本不支持 SQLite3，請從 %s
 invalid_db_setting=資料庫設定不正確: %v
 invalid_repo_path=倉庫根目錄設置不正確：%v
 run_user_not_match=執行系統用戶非當前用戶：%s -> %s
-smtp_host_missing_port=SMTP Host is missing port in address.
+smtp_host_missing_port=SMTP 主機缺少位址中的埠。
 invalid_smtp_from=SMTP 寄件者欄位無效﹔%v
 save_config_failed=設定儲存失敗：%v
 invalid_admin_setting=管理員帳戶設置不正確：%v
@@ -151,6 +151,8 @@ register_hepler_msg=已經註冊？立即登錄！
 social_register_hepler_msg=已經註冊？立即綁定！
 disable_register_prompt=對不起，註冊功能已被關閉。請聯系網站管理員。
 disable_register_mail=對不起，註冊郵箱確認功能已被關閉。
+auth_source=認證來源
+local=本地
 remember_me=記住登錄
 forgot_password=忘記密碼
 forget_password=忘記密碼？
@@ -169,13 +171,13 @@ reset_password_helper=單擊此處重置密碼
 password_too_short=密碼長度不能少於 6 位！
 non_local_account=非本地帳戶無法通過 Gogs 修改密碼。
 
-login_two_factor=Two-factor Authentication
-login_two_factor_passcode=Authentication Passcode
-login_two_factor_enter_recovery_code=Enter a two-factor recovery code
-login_two_factor_recovery=Two-factor Recovery
-login_two_factor_recovery_code=Recovery Code
-login_two_factor_enter_passcode=Enter a two-factor passcode
-login_two_factor_invalid_recovery_code=Recovery code has been used or does not valid.
+login_two_factor=兩步驗證
+login_two_factor_passcode=驗證碼
+login_two_factor_enter_recovery_code=鍵入兩部驗證碼
+login_two_factor_recovery=兩步恢復
+login_two_factor_recovery_code=恢復代碼
+login_two_factor_enter_passcode=鍵入兩步驗證碼
+login_two_factor_invalid_recovery_code=恢復代碼已使用或無效。
 
 [mail]
 activate_account=請激活您的帳戶
@@ -195,7 +197,7 @@ RepoName=儲存庫名稱
 Email=郵箱地址
 Password=密碼
 Retype=確認密碼
-SSHTitle=SSH 密鑰名稱
+SSHTitle=SSH 公鑰名稱
 HttpsUrl=HTTPS URL 地址
 PayloadUrl=推送地址
 TeamName=團隊名稱
@@ -229,6 +231,7 @@ org_name_been_taken=組織名稱已經被佔用。
 team_name_been_taken=團隊名稱已經被佔用。
 email_been_used=郵箱地址已經被使用。
 username_password_incorrect=用戶名或密碼不正確。
+auth_source_mismatch=此用戶未與所用的認證來源相關聯
 enterred_invalid_repo_name=請檢查您輸入的倉庫名稱是正確。
 enterred_invalid_owner_name=請檢查您輸入的新所有者用戶名是否正確。
 enterred_invalid_password=請檢查您輸入的密碼是否正確。
@@ -260,12 +263,12 @@ form.name_reserved=用戶名 '%s' 是被保留的。
 form.name_pattern_not_allowed=用戶名不允許 '%s' 的格式。
 
 [settings]
-profile=個人信息
+profile=個人資訊
 password=修改密碼
 avatar=頭像
 ssh_keys=管理 SSH 密鑰
-security=Security
-repos=Repositories
+security=安全
+repos=倉庫
 orgs=管理組織
 applications=管理授權應用
 delete=刪除帳戶
@@ -277,7 +280,7 @@ full_name=自定義名稱
 website=個人網站
 location=所在地區
 update_profile=更新信息
-update_profile_success=您的個人信息更新成功！
+update_profile_success=您的個人資訊更新成功！
 change_username=用戶名將被修改
 change_username_prompt=該操作將會影響到所有與您帳戶有關的鏈接
 continue=繼續操作
@@ -318,7 +321,7 @@ manage_ssh_keys=管理 SSH 密鑰
 add_key=增加密鑰
 ssh_desc=以下是與您帳戶所關聯的 SSH 密鑰，如果您發現有陌生的密鑰，請立即刪除它！
 ssh_helper=<strong>需要幫助嗎?</strong> 請查看有關 <a href="%s"> 如何生成 SSH 密鑰</a> 的指南或 <a href="%s"> SSH 的常見問題</a> 的疑難排解。
-add_new_key=增加 SSH 密鑰
+add_new_key=增加 SSH 公鑰
 ssh_key_been_used=公共密鑰已經被使用
 ssh_key_name_used=使用相同名稱的公共密鑰已經存在！
 key_name=密鑰名稱
@@ -334,30 +337,31 @@ no_activity=沒有最近活動
 key_state_desc=該密鑰在 7 天內被使用過
 token_state_desc=此token在過去七天內曾經被使用過
 
-two_factor=Two-factor Authentication
-two_factor_status=Status:
-two_factor_on=On
-two_factor_off=Off
-two_factor_enable=Enable
-two_factor_disable=Disable
-two_factor_view_recovery_codes=View and save <a href="%s%s">your recovery codes</a> in a safe place. You can use them as passcode if you lose access to your authentication application.
-two_factor_http=For HTTP/HTTPS operations, you are no longer able to use plain username and password. Please create and use <a href="%[1]s%[2]s">Personal Access Token</a> as your credential, e.g. <code>%[3]s</code>.
-two_factor_enable_title=Enable Two-factor Authentication
-two_factor_scan_qr=Please use your authentication application to scan the image:
-two_factor_or_enter_secret=Or enter the secret:
-two_factor_then_enter_passcode=Then enter passcode:
-two_factor_verify=Verify
-two_factor_invalid_passcode=The passcode you entered is not valid, please try again!
-two_factor_enable_error=Enable Two-factor authentication failed: %v
-two_factor_enable_success=Two-factor authentication has enabled for your account successfully!
-two_factor_recovery_codes_title=Two-factor Authentication Recovery Codes
-two_factor_recovery_codes_desc=Recovery codes are used when you temporarily lose access to your authentication application. Each recovery code can only be used once, <b>please keep these codes in a safe place</b>.
-two_factor_regenerate_recovery_codes=Regenerate Recovery Codes
-two_factor_regenerate_recovery_codes_error=Regenerate recovery codes failed: %v
-two_factor_regenerate_recovery_codes_success=New recovery codes has been generated successfully!
-two_factor_disable_title=Disable Two-factor Authentication
-two_factor_disable_desc=Your account security level will decrease after disabled two-factor authentication. Do you want to continue?
-two_factor_disable_success=Two-factor authentication has disabled successfully!
+two_factor=兩步驗證
+two_factor_status=狀態：
+two_factor_on=開啟
+two_factor_off=關閉
+two_factor_enable=啟用
+two_factor_disable=禁用
+two_factor_view_recovery_codes=在安全的地方查看並保存 <a href="%s%s"> 您的恢復代碼 </a>。如果您失去對身份驗證應用程式的存取權限, 則可以將它們用作密碼。
+two_factor_http=對於HTTP/HTTPS操作，您不能使用用戶名稱和密碼作為憑據。請創建和使用<a href=“%[1]s%[2]s”>個人操作令牌</a>作為您的憑據，如<code>%[3]s</code>。
+two_factor_enable_title=啟用兩步驗證
+two_factor_scan_qr=請使用您的身份驗證應用程式掃描圖像：
+two_factor_or_enter_secret=或輸入密碼: %s
+two_factor_then_enter_passcode=然後輸入驗證碼：
+two_factor_verify=驗證
+two_factor_invalid_passcode=您輸入的密碼無效，請再試一次。
+two_factor_reused_passcode=您输入的验证码已经被使用过了，请换一个重试！
+two_factor_enable_error=啟用兩步驗證失敗: %v
+two_factor_enable_success=您帳戶的兩步驗證已成功啟用！
+two_factor_recovery_codes_title=兩步驗證恢復代碼
+two_factor_recovery_codes_desc=當您無法存取您的認證應用程式時，可以使用救援代碼。每個救援代碼只能使用一次，因此 <b>請在安全的地方妥善保存您的救援代碼</b>。
+two_factor_regenerate_recovery_codes=重新生成恢復代碼
+two_factor_regenerate_recovery_codes_error=重新生成恢復代碼失敗: %v
+two_factor_regenerate_recovery_codes_success=已成功生成新的恢復代碼!
+two_factor_disable_title=停用兩步驗證
+two_factor_disable_desc=停用兩步驗證後，您的帳戶安全級別將降低。是否繼續？
+two_factor_disable_success=您帳戶的兩步驗證已成功停用！
 
 manage_access_token=管理個人操作令牌
 generate_new_token=生成新的令牌
@@ -375,10 +379,10 @@ orgs.none=您現在還不是任何組織的成員。
 orgs.leave_title=離開組織
 orgs.leave_desc=離開組織後，所有與組織相關的倉庫和團隊權限將被取消。是否繼續？
 
-repos.leave=Leave
-repos.leave_title=Leave repository
-repos.leave_desc=You will lose access to the repository after you left. Do you want to continue?
-repos.leave_success=You have left repository '%s' successfully!
+repos.leave=離開
+repos.leave_title=離開存儲庫
+repos.leave_desc=在你離開後，您將無法進入到存儲庫。你想要繼續嗎？
+repos.leave_success=您已經成功退出「%s」版本庫！
 
 delete_account=刪除當前帳戶
 delete_prompt=刪除操作會永久清除您的帳戶信息，並且 <strong>不可恢復</strong>！
@@ -417,6 +421,8 @@ mirror_last_synced=上次同步
 watchers=關注者
 stargazers=稱讚者
 forks=派生倉庫
+repo_description_helper=儲存庫的說明文字。最長 512 個字元。
+repo_description_length=可用字元
 
 form.reach_limit_of_creation=擁有者已達到儲存庫最大的新增上限 %d。
 form.name_reserved=倉庫名稱 '%s' 是被保留的。
@@ -450,7 +456,7 @@ quick_guide=快速幫助
 clone_this_repo=複製當前倉庫
 create_new_repo_command=從命令行創建一個新的倉庫
 push_exist_repo=從命令行推送已經創建的倉庫
-bare_message=This repository does not have any content yet.
+bare_message=此版本庫空空如也。
 
 files=檔案
 branch=分支
@@ -514,6 +520,7 @@ editor.file_changed_while_editing=從您開始編輯已更改檔的內容。<a t
 editor.file_already_exists=帶有名稱 '%s' 的檔已經存在在這個資料庫中。
 editor.no_changes_to_show=沒有可以顯示的變更。
 editor.fail_to_update_file=上傳/創建檔案 '%s' 失敗, 錯誤訊息: %v
+editor.fail_to_delete_file=無法刪除檔案「%s」，錯誤訊息：%v
 editor.add_subdir=新增子目錄...
 editor.unable_to_upload_files=上傳檔案失敗到 '%s', 錯誤訊息: %v
 editor.upload_files_to_dir=上傳檔案到 '%s'
@@ -616,6 +623,7 @@ pulls.compare_compare=對比文件變化
 pulls.filter_branch=過濾分支
 pulls.no_results=未找到結果
 pulls.nothing_to_compare=基準和對比分支代碼已經同步，無需進行對比。
+pulls.nothing_merge_base=因為兩個分支有完全不同的提交紀錄，因此無法比較。
 pulls.has_pull_request=`已經存在目標分支的合併請求：<a href="%[1]s/pulls/%[3]d">%[2]s#%[3]d</a>`
 pulls.create=創建合併請求
 pulls.title_desc=請求將 %[1]d 次代碼提交從 <code>%[2]s</code> 合併至 <code>%[3]s</code>
@@ -631,6 +639,9 @@ pulls.is_checking=該合併請求正在進行衝突檢查，請稍後再刷新
 pulls.can_auto_merge_desc=這個拉請求可以自動合併。
 pulls.cannot_auto_merge_desc=由於存在衝突，不能自動合併這推送請求。
 pulls.cannot_auto_merge_helper=請手動合併來解決衝突。
+pulls.create_merge_commit=創建一個合併提交
+pulls.rebase_before_merging=合併前先 Rebase
+pulls.commit_description=提交記錄說明
 pulls.merge_pull_request=合併請求
 pulls.open_unmerged_pull_exists=`由於已經存在來自相同倉庫和合併信息的未合併請求（#%d），您無法執行重新開啟操作。`
 pulls.delete_branch=刪除分支
@@ -686,11 +697,11 @@ settings.collaboration.write=可寫權限
 settings.collaboration.read=可讀權限
 settings.collaboration.undefined=未定義
 settings.branches=分支列表
-settings.branches_bare=You cannot manage branches for bare repository. Please push some content first.
+settings.branches_bare=您無法管理空版本庫。請先推送一些內容至版本庫。
 settings.default_branch=預設分支
 settings.default_branch_desc=預設分支是程式碼 commit、pull requests 及線上編輯的基準分支。
 settings.update=更新
-settings.update_default_branch_unsupported=Change default branch is not supported by the Git version on server.
+settings.update_default_branch_unsupported=伺服器的 Git 版本不支援變更預設分支。
 settings.update_default_branch_success=這個 repository 的預設分支更新成功！
 settings.protected_branches=保護分支
 settings.protected_branches_desc=保護分支不被強制 Push、意外刪除以及限制 Commit 者白名單
@@ -720,13 +731,13 @@ settings.change_reponame_prompt=該操作將會影響到所有與該倉庫有關
 settings.advanced_settings=高級設置
 settings.wiki_desc=啓用 Wiki 系統
 settings.use_internal_wiki=使用內建 wiki
-settings.allow_public_wiki_desc=Allow public access to wiki when repository is private
+settings.allow_public_wiki_desc=當版本庫為私有狀態時，允許 Wiki 的公開存取。
 settings.use_external_wiki=使用外部 wiki
 settings.external_wiki_url=外部 Wiki 連結
 settings.external_wiki_url_desc=當分頁上按一下，訪客將會重新導到 URL。
 settings.issues_desc=啟用問題追蹤
 settings.use_internal_issue_tracker=使用內建輕量級問題追蹤
-settings.allow_public_issues_desc=Allow public access to issues when repository is private
+settings.allow_public_issues_desc=當版本庫為私有狀態時，允許議題的公開存取。
 settings.use_external_issue_tracker=使用外部的問題管理系統
 settings.external_tracker_url=外部Issue Tracker網址
 settings.external_tracker_url_desc=當訪客在分頁上按一下，他們將會重新導向到 URL。
@@ -735,7 +746,9 @@ settings.tracker_issue_style=外部公單管理系統命名風格：
 settings.tracker_issue_style.numeric=數字
 settings.tracker_issue_style.alphanumeric=字母及數字
 settings.tracker_url_format_desc=您可以使用 <code>{user} {repo} {index}</code> 分別作為用戶名、倉庫名和問題索引的占位符。
-settings.pulls_desc=啟用合併請求以接受社區貢獻
+settings.pulls_desc=啟用「合併請求」功能，接受版本庫與分支之間的貢獻
+settings.pulls.ignore_whitespace=忽略空白符號的更改
+settings.pulls.allow_rebase_merge=允許使用 rebase 合併提交
 settings.danger_zone=危險操作區
 settings.cannot_fork_to_same_owner=你不可以 fork 一個 repository 到它的擁有者。
 settings.new_owner_has_same_repo=新的倉庫擁有者已經存在同名倉庫！
@@ -756,7 +769,7 @@ settings.wiki_deletion_success=儲存庫 wiki 資料已成功清除。
 settings.delete=刪除本倉庫
 settings.delete_desc=刪除倉庫操作不可逆轉，請三思而後行。
 settings.delete_notices_1=- 此操作 <strong>不可以</strong> 被回滾。
-settings.delete_notices_2=- 此操作將永久刪除該倉庫，包括 Git 數據、 問題、 評論和協作者的操作權限。
+settings.delete_notices_2=- 此動作將永久移除版本庫，包含了 Git 資料、議題、留言與協作者的存取權限。
 settings.delete_notices_fork_1=- 刪除後所有的派生倉庫將會成為獨立倉庫
 settings.deletion_success=倉庫刪除成功！
 settings.update_settings_success=倉庫設置更新成功！
@@ -780,8 +793,8 @@ settings.webhook_deletion_success=Web 鉤子刪除成功！
 settings.webhook.test_delivery=測試推送
 settings.webhook.test_delivery_desc=生成並推送一個模擬的 Push 事件
 settings.webhook.test_delivery_success=測試推送已經加入到隊列，請耐心等待數秒再刷新推送記錄。
-settings.webhook.redelivery=Redelivery
-settings.webhook.redelivery_success=Hook task '%s' has been readded to delivery queue. It may take few seconds to update delivery status in history.
+settings.webhook.redelivery=重新傳送
+settings.webhook.redelivery_success=任務「%s」已經重新加入至隊列。可能需要幾秒鐘來更新歷史的隊列狀態
 settings.webhook.request=請求內容
 settings.webhook.response=響應內容
 settings.webhook.headers=標題
@@ -814,10 +827,10 @@ settings.event_push=推送
 settings.event_push_desc=Git 倉庫推送
 settings.event_issues=Issues
 settings.event_issues_desc=已經開啟、關閉、重啟、修改、指派、取消指派、更新標籤、清除標籤、新增里程碑或刪除里程碑的 issue。
-settings.event_issue_comment=Issue 評論
-settings.event_issue_comment_desc=已經建立、編輯或刪除的 Issue 評論。
 settings.event_pull_request=合併請求
 settings.event_pull_request_desc=已經開啟、關閉、重啟、編輯、指派、解除指派、更新標籤、清除標籤、新增里程碑、刪除里程碑或同步的 pull request。
+settings.event_issue_comment=Issue 評論
+settings.event_issue_comment_desc=已經建立、編輯或刪除的 Issue 評論。
 settings.event_release=Release
 settings.event_release_desc=Release 將發佈在一個 repository 中。
 settings.active=是否激活
@@ -830,11 +843,12 @@ settings.recent_deliveries=最近推送記錄
 settings.hook_type=鉤子類型
 settings.add_slack_hook_desc=為您的倉庫增加 <a href="%s">Slack</a> 集成。
 settings.add_discord_hook_desc=Hook <a href="%s">Discord</a> 到你的 repository。
+settings.add_dingtalk_hook_desc=在您的版本庫增加 <a href="%s">Dingtalk</a> 整合
 settings.slack_token=令牌
 settings.slack_domain=域名
 settings.slack_channel=頻道
 settings.deploy_keys=管理部署密鑰
-settings.deploy_keys_helper=<b>噢不！</b> 如果要新增個人的公開金要，請到 <a href="%s%s">用戶設定</a> 新增。
+settings.deploy_keys_helper=<b>噢不！</b> 如果要新增個人的公開金鑰，請到 <a href="%s%s">用戶設定</a> 新增。
 settings.add_deploy_key=添加部署密鑰
 settings.deploy_key_desc=部署密鑰僅具有隻讀權限，它在功能上和個人用戶的公開密鑰有本質區別。
 settings.no_deploy_keys=您還沒有添加任何部署密鑰。
@@ -846,6 +860,8 @@ settings.add_key_success=新的部署密鑰 '%s' 添加成功！
 settings.deploy_key_deletion=刪除部署密鑰
 settings.deploy_key_deletion_desc=刪除該部署密鑰會移除本倉庫所有相關的操作權限。是否繼續？
 settings.deploy_key_deletion_success=刪除部署密鑰成功！
+settings.description_desc=儲存庫的說明文字。最長 512 個字元。
+settings.description_length=可用字元
 
 diff.browse_source=瀏覽代碼
 diff.parent=父節點
@@ -1081,11 +1097,12 @@ repos.stars=讚好數
 repos.issues=問題數
 repos.size=大小
 
-auths.auth_manage_panel=認證管理面板
+auths.auth_sources=認證來源
 auths.new=添加新認證源
 auths.name=認證名稱
 auths.type=認證類型
 auths.enabled=已啟用
+auths.default=預設
 auths.updated=最後更新時間
 auths.auth_type=認證類型
 auths.auth_name=認證名稱
@@ -1094,20 +1111,21 @@ auths.domain=域名
 auths.host=主機地址
 auths.port=主機端口
 auths.bind_dn=綁定DN
+auths.bind_dn_helper=可以使用'%s'作為用戶名稱的預留位置，例如：DOM\%s
 auths.bind_password=綁定密碼
 auths.bind_password_helper=警告：該密碼將會以明文的形式保存在數據庫中。請不要使用擁有高權限的帳戶！
 auths.user_base=用戶搜索基準
 auths.user_dn=User DN
 auths.attribute_username=用戶名屬性
 auths.attribute_username_placeholder=留空表示使用用戶登錄時所使用的用戶名
-auths.attribute_name=First Name Attribute
+auths.attribute_name=歸納名字
 auths.attribute_surname=姓氏屬性
 auths.attribute_mail=電子郵箱屬性
-auths.verify_group_membership=Verify group membership
-auths.group_search_base_dn=Group Search Base DN
-auths.group_filter=Group Filter
-auths.group_attribute_contain_user_list=Group Attribute Containing List of Users
-auths.user_attribute_listed_in_group=User Attribute Listed in Group
+auths.verify_group_membership=驗證組成員身份
+auths.group_search_base_dn=組蒐索基準 DN
+auths.group_filter=組篩選器
+auths.group_attribute_contain_user_list=包含使用者列表的群組屬性
+auths.user_attribute_listed_in_group=組中列出的使用者屬性
 auths.attributes_in_bind=從 Bind DN 中獲取屬性信息
 auths.filter=使用者篩選器
 auths.admin_filter=管理者篩選器
@@ -1121,9 +1139,9 @@ auths.enable_tls=啟用 TLS 加密
 auths.skip_tls_verify=忽略 TLS 驗證
 auths.pam_service_name=PAM 服務名稱
 auths.enable_auto_register=允許授權用戶自動註冊
-auths.tips=幫助提示
 auths.edit=編輯認證設置
 auths.activated=該授權認證已經啟用
+auths.default_auth=此認證方式為預設登入來源
 auths.new_success=新的認證源 "%s" 添加成功！
 auths.update_success=認證設置更新成功！
 auths.update=更新認證設置
@@ -1134,6 +1152,7 @@ auths.still_in_used=一些使用者仍然使用此驗證方式，請先刪除或
 auths.deletion_success=認證源刪除成功！
 auths.login_source_exist=登錄源 '%s' 已存在。
 
+config.not_set=(未設定)
 config.server_config=服務器配置
 config.app_name=應用名稱
 config.app_ver=應用版本
@@ -1155,6 +1174,7 @@ config.ssh_domain=域名
 config.ssh_port=埠
 config.ssh_listen_port=監聽埠
 config.ssh_root_path=根路徑
+config.ssh_rewrite_authorized_keys_at_start=在啟動時重寫 authorized_keys 檔案
 config.ssh_key_test_path=金鑰測試路徑
 config.ssh_keygen_path=金鑰產生 (' ssh-keygen ') 路徑
 config.ssh_minimum_key_size_check=金鑰最小大小檢查
@@ -1170,6 +1190,9 @@ config.disable_http_git=停用 HTTP Git
 config.enable_local_path_migration=啟用本地路徑遷移
 config.commits_fetch_concurrency=同時Fetch Commit數量
 
+config.http_config=HTTP設定
+config.http_access_control_allow_origin=Access Control Allow Origin
+
 config.db_config=資料庫設定
 config.db_type=數據庫類型
 config.db_host=主機地址
@@ -1199,7 +1222,7 @@ config.skip_tls_verify=忽略 TLS 驗證
 config.mailer_config=郵件配置
 config.mailer_enabled=啟用服務
 config.mailer_disable_helo=禁用 HELO 操作
-config.mailer_name=發送者名稱
+config.mailer_subject_prefix=主旨前置詞
 config.mailer_host=郵件主機地址
 config.mailer_user=發送者帳號
 config.send_test_mail=發送測試郵件
@@ -1272,7 +1295,6 @@ notices.delete_success=系統提示刪除成功！
 
 [action]
 create_repo=創建了儲存庫 <a href="%s">%s</a>
-fork_repo=已經 fork 一個 repository 到 <a href="%s">%s</a>
 rename_repo=重新命名倉庫 <code>%[1]s</code> 為 <a href="%[2]s">%[3]s</a>
 commit_repo=推送了 <a href="%[1]s/src/%[2]s">%[3]s</a> 分支的代碼到 <a href="%[1]s">%[4]s</a>
 compare_commits=查看 %d 次提交的內容比對
@@ -1289,6 +1311,10 @@ create_branch=在 <a href="%[1]s">%[4]s</a> 建立新的分支 <a href="%[1]s/sr
 delete_branch=已經刪除在 <a href="%[1]s">%[3]s</a> 上的分支 <code>%[2]s</code>
 push_tag=推送了標籤 <a href="%s/src/%s">%[2]s</a> 到 <a href="%[1]s">%[3]s</a>
 delete_tag=已經刪除在 <a href="%[1]s">%[3]s</a> 上的標籤 <code>%[2]s</code>
+fork_repo=已經 fork 一個 repository 到 <a href="%s">%s</a>
+mirror_sync_push=已經從鏡像同步了提交 <a href="%[1]s/src/%[2]s">%[3]s</a> 於 <a href="%[1]s">%[4]s</a>
+mirror_sync_create=已經從鏡像同步了參考 <a href="%s/src/%s">%[2]s</a> 到 <a href="%[1]s">%[3]s</a>
+mirror_sync_delete=已經從鏡像同步並移除了參考 <code>%[2]s</code> 於 <a href="%[1]s">%[3]s</a>
 
 [tool]
 ago=之前

docker/README.md

@@ -1,6 +1,6 @@
 # Docker for Gogs
 
-Visit [Docker Hub](https://hub.docker.com/r/gogs/) / [Docker Store](https://store.docker.com/community/images/gogs/gogs) see all available images and tags.
+Visit [Docker Cloud](https://cloud.docker.com/swarm/gogs/repository/docker/gogs/gogs) / [Docker Store](https://store.docker.com/community/images/gogs/gogs) see all available images and tags.
 
 ## Usage
 
@@ -36,6 +36,10 @@ Directory `/var/gogs` keeps Git repositories and Gogs data:
         |-- data
         |-- log
 
+#### Custom Directory
+
+The "custom" directory may not be obvious in Docker environment. The `/var/gogs/gogs` (in the host) and `/data/gogs` (in the container) is already the "custom" directory and you do not need to create another layer but directly edit corresponding files under this directory.
+
 ### Volume With Data Container
 
 If you're more comfortable with mounting data to a data container, the commands you execute at the first time will look like as follows:
@@ -104,11 +108,11 @@ Steps to upgrade Gogs with Docker:
 - `docker pull gogs/gogs`
 - `docker stop gogs`
 - `docker rm gogs`
-- Finally, create container as the first time and don't forget to do same volume and port mapping.
+- Finally, create a container for the first time and don't forget to do the same for the volume and port mapping.
 
 ## Known Issues
 
-- The docker container can not currently be build on Raspberry 1 (armv6l) as our base image `alpine` does not have a `go` package available for this platform.
+- The docker container cannot currently be built on Raspberry 1 (armv6l) as our base image `alpine` does not have a `go` package available for this platform.
 
 ## Useful Links
 

docker/aarch64/build.sh

@@ -0,0 +1,3 @@
+#!/bin/bash
+
+go build -ldflags "-w -s" resin-xbuild.go

docker/aarch64/resin-xbuild.go

@@ -0,0 +1,66 @@
+package main
+
+import (
+	"log"
+	"os"
+	"os/exec"
+	"syscall"
+)
+
+func crossBuildStart() {
+	err := os.Remove("/bin/sh")
+	if err != nil {
+		log.Fatal(err)
+	}
+	err = os.Link("/usr/bin/resin-xbuild", "/bin/sh")
+	if err != nil {
+		log.Fatal(err)
+	}
+}
+
+func crossBuildEnd() {
+	err := os.Remove("/bin/sh")
+	if err != nil {
+		log.Fatal(err)
+	}
+	err = os.Link("/bin/sh.real", "/bin/sh")
+	if err != nil {
+		log.Fatal(err)
+	}
+}
+
+func runShell() error {
+	cmd := exec.Command("/usr/bin/qemu-aarch64-static", append([]string{"-0", "/bin/sh", "/bin/sh"}, os.Args[1:]...)...)
+	cmd.Stdin = os.Stdin
+	cmd.Stdout = os.Stdout
+	cmd.Stderr = os.Stderr
+	return cmd.Run()
+}
+
+func main() {
+	switch os.Args[0] {
+	case "cross-build-start":
+		crossBuildStart()
+	case "cross-build-end":
+		crossBuildEnd()
+	case "/bin/sh":
+		code := 0
+		crossBuildEnd()
+
+		if err := runShell(); err != nil {
+			code = 1
+			if exiterr, ok := err.(*exec.ExitError); ok {
+				if status, ok := exiterr.Sys().(syscall.WaitStatus); ok {
+					code = status.ExitStatus()
+				}
+			}
+		}
+
+		crossBuildStart()
+
+		// Hack to bypass apk issues with triggering
+		code = 0
+
+		os.Exit(code)
+	}
+}

docker/armhf/build.sh

@@ -0,0 +1,3 @@
+#!/bin/bash
+
+go build -ldflags "-w -s" resin-xbuild.go

docker/armhf/resin-xbuild.go

@@ -0,0 +1,66 @@
+package main
+
+import (
+	"log"
+	"os"
+	"os/exec"
+	"syscall"
+)
+
+func crossBuildStart() {
+	err := os.Remove("/bin/sh")
+	if err != nil {
+		log.Fatal(err)
+	}
+	err = os.Link("/usr/bin/resin-xbuild", "/bin/sh")
+	if err != nil {
+		log.Fatal(err)
+	}
+}
+
+func crossBuildEnd() {
+	err := os.Remove("/bin/sh")
+	if err != nil {
+		log.Fatal(err)
+	}
+	err = os.Link("/bin/sh.real", "/bin/sh")
+	if err != nil {
+		log.Fatal(err)
+	}
+}
+
+func runShell() error {
+	cmd := exec.Command("/usr/bin/qemu-arm-static", append([]string{"-0", "/bin/sh", "/bin/sh"}, os.Args[1:]...)...)
+	cmd.Stdin = os.Stdin
+	cmd.Stdout = os.Stdout
+	cmd.Stderr = os.Stderr
+	return cmd.Run()
+}
+
+func main() {
+	switch os.Args[0] {
+	case "cross-build-start":
+		crossBuildStart()
+	case "cross-build-end":
+		crossBuildEnd()
+	case "/bin/sh":
+		code := 0
+		crossBuildEnd()
+
+		if err := runShell(); err != nil {
+			code = 1
+			if exiterr, ok := err.(*exec.ExitError); ok {
+				if status, ok := exiterr.Sys().(syscall.WaitStatus); ok {
+					code = status.ExitStatus()
+				}
+			}
+		}
+
+		crossBuildStart()
+
+		// Hack to bypass apk issues with triggering
+		code = 0
+
+		os.Exit(code)
+	}
+}

docker/build.sh

@@ -5,15 +5,14 @@ set -e
 # Set temp environment vars
 export GOPATH=/tmp/go
 export PATH=/usr/local/go/bin:${PATH}:${GOPATH}/bin
-export GO15VENDOREXPERIMENT=1
 
 # Install build deps
 apk --no-cache --no-progress add --virtual build-deps build-base linux-pam-dev
 
 # Build Gogs
-mkdir -p ${GOPATH}/src/github.com/gogits/
-ln -s /app/gogs/build ${GOPATH}/src/github.com/gogits/gogs
-cd ${GOPATH}/src/github.com/gogits/gogs
+mkdir -p ${GOPATH}/src/github.com/gogs/
+ln -s /app/gogs/build ${GOPATH}/src/github.com/gogs/gogs
+cd ${GOPATH}/src/github.com/gogs/gogs
 # Needed since git 2.9.3 or 2.9.4
 git config --global http.https://gopkg.in.followRedirects true
 make build TAGS="sqlite cert pam"
@@ -24,6 +23,9 @@ rm -r $GOPATH
 # Remove build deps
 apk --no-progress del build-deps
 
-# Create git user for Gogs
-adduser -H -D -g 'Gogs Git User' git -h /data/git -s /bin/bash && passwd -u git
-echo "export GOGS_CUSTOM=${GOGS_CUSTOM}" >> /etc/profile
+# Move to final place
+mv /app/gogs/build/gogs /app/gogs/
+
+# Cleanup go
+rm -rf /tmp/go
+rm -rf /usr/local/go

docker/finalize.sh

@@ -4,11 +4,10 @@
 set -x
 set -e
 
-# Move to final place
-mv /app/gogs/build/gogs /app/gogs/
-mv /app/gogs/build/templates /app/gogs/
-mv /app/gogs/build/public /app/gogs/
-mv /app/gogs/build/docker /app/gogs/
+# Create git user for Gogs
+addgroup -S git
+adduser -G git -H -D -g 'Gogs Git User' git -h /data/git -s /bin/bash && usermod -p '*' git && passwd -u git
+echo "export GOGS_CUSTOM=${GOGS_CUSTOM}" >> /etc/profile
 
 # Final cleaning
 rm -rf /app/gogs/build
@@ -17,6 +16,3 @@ rm /app/gogs/docker/build-go.sh
 rm /app/gogs/docker/finalize.sh
 rm /app/gogs/docker/nsswitch.conf
 rm /app/gogs/docker/README.md
-
-rm -rf /tmp/go
-rm -rf /usr/local/go

docker/no-pic.patch

@@ -13,4 +13,4 @@ index 14f4fa9..5599307 100644
 +
  	if l.Debugvlog != 0 {
  		l.Logf("%5.2f host link:", obj.Cputime())
- 		for _, v := range argv {
+ 		for _, v := range argv {

docker/s6/gogs/setup

@@ -13,11 +13,14 @@ fi
 cd /app/gogs
 
 # Link volumed data with app data
-ln -sf /data/gogs/log  ./log
-ln -sf /data/gogs/data ./data
+ln -sfn /data/gogs/log  ./log
+ln -sfn /data/gogs/data ./data
 
 # Backward Compatibility with Gogs Container v0.6.15
-ln -sf /data/git /home/git
+ln -sfn /data/git /home/git
 
-chown -R git:git /data /app/gogs ~git/
+# Only chown for the first time, owner of '/data' is 'git' inside Docker after installation
+if [ $(stat -c '%U' /data) != 'git' ]; then
+	chown -R git:git /data /app/gogs ~git/
+fi
 chmod 0755 /data /data/gogs ~git/

docker/sshd_config

@@ -11,6 +11,5 @@ HostKey /data/ssh/ssh_host_ed25519_key
 PermitRootLogin no
 AuthorizedKeysFile	.ssh/authorized_keys
 PasswordAuthentication no
-UsePrivilegeSeparation no
 PermitUserEnvironment yes
 AllowUsers git

docker/start.sh

@@ -38,6 +38,14 @@ create_volume_subfolder() {
     done
 }
 
+setids() {
+    PUID=${PUID:-1000}
+    PGID=${PGID:-1000}
+    groupmod -o -g "$PGID" git
+    usermod -o -u "$PUID" git
+}
+
+setids
 cleanup
 create_volume_subfolder
 

gogs.go

@@ -1,4 +1,4 @@
-// +build go1.6
+// +build go1.8
 
 // Copyright 2014 The Gogs Authors. All rights reserved.
 // Use of this source code is governed by a MIT-style
@@ -12,21 +12,21 @@ import (
 
 	"github.com/urfave/cli"
 
-	"github.com/gogits/gogs/cmd"
-	"github.com/gogits/gogs/pkg/setting"
+	"github.com/gogs/gogs/cmd"
+	"github.com/gogs/gogs/pkg/setting"
 )
 
-const APP_VER = "0.11.19.0609"
+const Version = "0.11.91.0811"
 
 func init() {
-	setting.AppVer = APP_VER
+	setting.AppVer = Version
 }
 
 func main() {
 	app := cli.NewApp()
 	app.Name = "Gogs"
 	app.Usage = "A painless self-hosted Git service"
-	app.Version = APP_VER
+	app.Version = Version
 	app.Commands = []cli.Command{
 		cmd.Web,
 		cmd.Serv,
@@ -37,6 +37,5 @@ func main() {
 		cmd.Backup,
 		cmd.Restore,
 	}
-	app.Flags = append(app.Flags, []cli.Flag{}...)
 	app.Run(os.Args)
 }

models/access.go

@@ -9,7 +9,7 @@ import (
 
 	log "gopkg.in/clog.v1"
 
-	"github.com/gogits/gogs/models/errors"
+	"github.com/gogs/gogs/models/errors"
 )
 
 type AccessMode int
@@ -59,7 +59,7 @@ type Access struct {
 	Mode   AccessMode
 }
 
-func accessLevel(e Engine, userID int64, repo *Repository) (AccessMode, error) {
+func userAccessMode(e Engine, userID int64, repo *Repository) (AccessMode, error) {
 	mode := ACCESS_MODE_NONE
 	// Everyone has read access to public repository
 	if !repo.IsPrivate {
@@ -84,14 +84,13 @@ func accessLevel(e Engine, userID int64, repo *Repository) (AccessMode, error) {
 	return access.Mode, nil
 }
 
-// AccessLevel returns the Access a user has to a repository. Will return NoneAccess if the
-// user does not have access.
-func AccessLevel(userID int64, repo *Repository) (AccessMode, error) {
-	return accessLevel(x, userID, repo)
+// UserAccessMode returns the access mode of given user to the repository.
+func UserAccessMode(userID int64, repo *Repository) (AccessMode, error) {
+	return userAccessMode(x, userID, repo)
 }
 
 func hasAccess(e Engine, userID int64, repo *Repository, testMode AccessMode) (bool, error) {
-	mode, err := accessLevel(e, userID, repo)
+	mode, err := userAccessMode(e, userID, repo)
 	return mode >= testMode, err
 }
 
@@ -112,14 +111,12 @@ func (u *User) GetRepositoryAccesses() (map[*Repository]AccessMode, error) {
 		repo, err := GetRepositoryByID(access.RepoID)
 		if err != nil {
 			if errors.IsRepoNotExist(err) {
-				log.Error(4, "GetRepositoryByID: %v", err)
+				log.Error(2, "GetRepositoryByID: %v", err)
 				continue
 			}
 			return nil, err
 		}
-		if err = repo.GetOwner(); err != nil {
-			return nil, err
-		} else if repo.OwnerID == u.ID {
+		if repo.OwnerID == u.ID {
 			continue
 		}
 		repos[repo] = access.Mode
@@ -239,6 +236,6 @@ func (repo *Repository) recalculateAccesses(e Engine) error {
 }
 
 // RecalculateAccesses recalculates all accesses for repository.
-func (r *Repository) RecalculateAccesses() error {
-	return r.recalculateAccesses(x)
+func (repo *Repository) RecalculateAccesses() error {
+	return repo.recalculateAccesses(x)
 }

models/action.go

@@ -5,7 +5,6 @@
 package models
 
 import (
-	"encoding/json"
 	"fmt"
 	"path"
 	"regexp"
@@ -15,19 +14,20 @@ import (
 
 	"github.com/Unknwon/com"
 	"github.com/go-xorm/xorm"
+	"github.com/json-iterator/go"
 	log "gopkg.in/clog.v1"
 
-	"github.com/gogits/git-module"
-	api "github.com/gogits/go-gogs-client"
+	"github.com/gogs/git-module"
+	api "github.com/gogs/go-gogs-client"
 
-	"github.com/gogits/gogs/models/errors"
-	"github.com/gogits/gogs/pkg/tool"
-	"github.com/gogits/gogs/pkg/setting"
+	"github.com/gogs/gogs/models/errors"
+	"github.com/gogs/gogs/pkg/setting"
+	"github.com/gogs/gogs/pkg/tool"
 )
 
 type ActionType int
 
-// To maintain backward compatibility only append to the end of list
+// Note: To maintain backward compatibility only append to the end of list
 const (
 	ACTION_CREATE_REPO         ActionType = iota + 1 // 1
 	ACTION_RENAME_REPO                               // 2
@@ -48,6 +48,9 @@ const (
 	ACTION_DELETE_BRANCH                             // 17
 	ACTION_DELETE_TAG                                // 18
 	ACTION_FORK_REPO                                 // 19
+	ACTION_MIRROR_SYNC_PUSH                          // 20
+	ACTION_MIRROR_SYNC_CREATE                        // 21
+	ACTION_MIRROR_SYNC_DELETE                        // 22
 )
 
 var (
@@ -55,36 +58,31 @@ var (
 	IssueCloseKeywords  = []string{"close", "closes", "closed", "fix", "fixes", "fixed", "resolve", "resolves", "resolved"}
 	IssueReopenKeywords = []string{"reopen", "reopens", "reopened"}
 
-	IssueCloseKeywordsPat, IssueReopenKeywordsPat *regexp.Regexp
-	IssueReferenceKeywordsPat                     *regexp.Regexp
+	IssueCloseKeywordsPat     = regexp.MustCompile(assembleKeywordsPattern(IssueCloseKeywords))
+	IssueReopenKeywordsPat    = regexp.MustCompile(assembleKeywordsPattern(IssueReopenKeywords))
+	IssueReferenceKeywordsPat = regexp.MustCompile(`(?i)(?:)(^| )\S+`)
 )
 
 func assembleKeywordsPattern(words []string) string {
 	return fmt.Sprintf(`(?i)(?:%s) \S+`, strings.Join(words, "|"))
 }
 
-func init() {
-	IssueCloseKeywordsPat = regexp.MustCompile(assembleKeywordsPattern(IssueCloseKeywords))
-	IssueReopenKeywordsPat = regexp.MustCompile(assembleKeywordsPattern(IssueReopenKeywords))
-	IssueReferenceKeywordsPat = regexp.MustCompile(`(?i)(?:)(^| )\S+`)
-}
-
 // Action represents user operation type and other information to repository,
 // it implemented interface base.Actioner so that can be used in template render.
 type Action struct {
 	ID           int64
-	UserID       int64 // Receiver user id.
+	UserID       int64 // Receiver user ID
 	OpType       ActionType
-	ActUserID    int64  // Action user id.
-	ActUserName  string // Action user name.
-	ActAvatar    string `xorm:"-"`
-	RepoID       int64
+	ActUserID    int64  // Doer user ID
+	ActUserName  string // Doer user name
+	ActAvatar    string `xorm:"-" json:"-"`
+	RepoID       int64  `xorm:"INDEX"`
 	RepoUserName string
 	RepoName     string
 	RefName      string
 	IsPrivate    bool      `xorm:"NOT NULL DEFAULT false"`
 	Content      string    `xorm:"TEXT"`
-	Created      time.Time `xorm:"-"`
+	Created      time.Time `xorm:"-" json:"-"`
 	CreatedUnix  int64
 }
 
@@ -251,7 +249,7 @@ func NewPushCommits() *PushCommits {
 	}
 }
 
-func (pc *PushCommits) ToApiPayloadCommits(repoPath, repoLink string) ([]*api.PayloadCommit, error) {
+func (pc *PushCommits) ToApiPayloadCommits(repoPath, repoURL string) ([]*api.PayloadCommit, error) {
 	commits := make([]*api.PayloadCommit, len(pc.Commits))
 	for i, commit := range pc.Commits {
 		authorUsername := ""
@@ -278,7 +276,7 @@ func (pc *PushCommits) ToApiPayloadCommits(repoPath, repoLink string) ([]*api.Pa
 		commits[i] = &api.PayloadCommit{
 			ID:      commit.Sha1,
 			Message: commit.Message,
-			URL:     fmt.Sprintf("%s/commit/%s", repoLink, commit.Sha1),
+			URL:     fmt.Sprintf("%s/commit/%s", repoURL, commit.Sha1),
 			Author: &api.PayloadUser{
 				Name:     commit.AuthorName,
 				Email:    commit.AuthorEmail,
@@ -379,8 +377,7 @@ func UpdateIssuesCommit(doer *User, repo *Repository, commits []*PushCommit) err
 			if ref[0] == '#' {
 				ref = fmt.Sprintf("%s%s", repo.FullName(), ref)
 			} else if !strings.Contains(ref, "/") {
-				// We don't support User#ID syntax yet
-				// return ErrNotImplemented
+				// FIXME: We don't support User#ID syntax yet
 				continue
 			}
 
@@ -490,8 +487,11 @@ func CommitRepoAction(opts CommitRepoActionOptions) error {
 			opts.Commits.CompareURL = repo.ComposeCompareURL(opts.OldCommitID, opts.NewCommitID)
 		}
 
-		if err = UpdateIssuesCommit(pusher, repo, opts.Commits.Commits); err != nil {
-			log.Error(2, "UpdateIssuesCommit: %v", err)
+		// Only update issues via commits when internal issue tracker is enabled
+		if repo.EnableIssues && !repo.EnableExternalTracker {
+			if err = UpdateIssuesCommit(pusher, repo, opts.Commits.Commits); err != nil {
+				log.Error(2, "UpdateIssuesCommit: %v", err)
+			}
 		}
 	}
 
@@ -499,7 +499,7 @@ func CommitRepoAction(opts CommitRepoActionOptions) error {
 		opts.Commits.Commits = opts.Commits.Commits[:setting.UI.FeedMaxCommitNum]
 	}
 
-	data, err := json.Marshal(opts.Commits)
+	data, err := jsoniter.Marshal(opts.Commits)
 	if err != nil {
 		return fmt.Errorf("Marshal: %v", err)
 	}
@@ -604,6 +604,7 @@ func CommitRepoAction(opts CommitRepoActionOptions) error {
 		if err = PrepareWebhooks(repo, HOOK_EVENT_CREATE, &api.CreatePayload{
 			Ref:           refName,
 			RefType:       "tag",
+			Sha:           opts.NewCommitID,
 			DefaultBranch: repo.DefaultBranch,
 			Repo:          apiRepo,
 			Sender:        apiPusher,
@@ -668,6 +669,71 @@ func MergePullRequestAction(actUser *User, repo *Repository, pull *Issue) error
 	return mergePullRequestAction(x, actUser, repo, pull)
 }
 
+func mirrorSyncAction(opType ActionType, repo *Repository, refName string, data []byte) error {
+	return NotifyWatchers(&Action{
+		ActUserID:    repo.OwnerID,
+		ActUserName:  repo.MustOwner().Name,
+		OpType:       opType,
+		Content:      string(data),
+		RepoID:       repo.ID,
+		RepoUserName: repo.MustOwner().Name,
+		RepoName:     repo.Name,
+		RefName:      refName,
+		IsPrivate:    repo.IsPrivate,
+	})
+}
+
+type MirrorSyncPushActionOptions struct {
+	RefName     string
+	OldCommitID string
+	NewCommitID string
+	Commits     *PushCommits
+}
+
+// MirrorSyncPushAction adds new action for mirror synchronization of pushed commits.
+func MirrorSyncPushAction(repo *Repository, opts MirrorSyncPushActionOptions) error {
+	if len(opts.Commits.Commits) > setting.UI.FeedMaxCommitNum {
+		opts.Commits.Commits = opts.Commits.Commits[:setting.UI.FeedMaxCommitNum]
+	}
+
+	apiCommits, err := opts.Commits.ToApiPayloadCommits(repo.RepoPath(), repo.HTMLURL())
+	if err != nil {
+		return fmt.Errorf("ToApiPayloadCommits: %v", err)
+	}
+
+	opts.Commits.CompareURL = repo.ComposeCompareURL(opts.OldCommitID, opts.NewCommitID)
+	apiPusher := repo.MustOwner().APIFormat()
+	if err := PrepareWebhooks(repo, HOOK_EVENT_PUSH, &api.PushPayload{
+		Ref:        opts.RefName,
+		Before:     opts.OldCommitID,
+		After:      opts.NewCommitID,
+		CompareURL: setting.AppURL + opts.Commits.CompareURL,
+		Commits:    apiCommits,
+		Repo:       repo.APIFormat(nil),
+		Pusher:     apiPusher,
+		Sender:     apiPusher,
+	}); err != nil {
+		return fmt.Errorf("PrepareWebhooks: %v", err)
+	}
+
+	data, err := jsoniter.Marshal(opts.Commits)
+	if err != nil {
+		return err
+	}
+
+	return mirrorSyncAction(ACTION_MIRROR_SYNC_PUSH, repo, opts.RefName, data)
+}
+
+// MirrorSyncCreateAction adds new action for mirror synchronization of new reference.
+func MirrorSyncCreateAction(repo *Repository, refName string) error {
+	return mirrorSyncAction(ACTION_MIRROR_SYNC_CREATE, repo, refName, nil)
+}
+
+// MirrorSyncCreateAction adds new action for mirror synchronization of delete reference.
+func MirrorSyncDeleteAction(repo *Repository, refName string) error {
+	return mirrorSyncAction(ACTION_MIRROR_SYNC_DELETE, repo, refName, nil)
+}
+
 // GetFeeds returns action list of given user in given context.
 // actorID is the user who's requesting, ctxUserID is the user/org that is requested.
 // actorID can be -1 when isProfile is true or to skip the permission check.

models/admin.go

@@ -7,7 +7,6 @@ package models
 import (
 	"fmt"
 	"os"
-	"os/exec"
 	"strings"
 	"time"
 
@@ -15,8 +14,7 @@ import (
 	"github.com/go-xorm/xorm"
 	log "gopkg.in/clog.v1"
 
-	"github.com/gogits/gogs/pkg/setting"
-	"github.com/gogits/gogs/pkg/tool"
+	"github.com/gogs/gogs/pkg/tool"
 )
 
 type NoticeType int
@@ -30,7 +28,7 @@ type Notice struct {
 	ID          int64
 	Type        NoticeType
 	Description string    `xorm:"TEXT"`
-	Created     time.Time `xorm:"-"`
+	Created     time.Time `xorm:"-" json:"-"`
 	CreatedUnix int64
 }
 
@@ -52,9 +50,9 @@ func (n *Notice) TrStr() string {
 
 // CreateNotice creates new system notice.
 func CreateNotice(tp NoticeType, desc string) error {
-	// prevent panic if database connection is not available at this point
+	// Prevent panic if database connection is not available at this point
 	if x == nil {
-		return fmt.Errorf("Could not save notice due database connection not being available: %d %s", tp, desc)
+		return fmt.Errorf("could not save notice due database connection not being available: %d %s", tp, desc)
 	}
 
 	n := &Notice{
@@ -73,24 +71,11 @@ func CreateRepositoryNotice(desc string) error {
 // RemoveAllWithNotice removes all directories in given path and
 // creates a system notice when error occurs.
 func RemoveAllWithNotice(title, path string) {
-	var err error
-	// LEGACY [Go 1.7]: workaround for Go not being able to remove read-only files/folders: https://github.com/golang/go/issues/9606
-	// this bug should be fixed on Go 1.7, so the workaround should be removed when Gogs don't support Go 1.6 anymore:
-	// https://github.com/golang/go/commit/2ffb3e5d905b5622204d199128dec06cefd57790
-	// Note: Windows complains when delete target does not exist, therefore we can skip deletion in such cases.
-	if setting.IsWindows && com.IsExist(path) {
-		// converting "/" to "\" in path on Windows
-		path = strings.Replace(path, "/", "\\", -1)
-		err = exec.Command("cmd", "/C", "rmdir", "/S", "/Q", path).Run()
-	} else {
-		err = os.RemoveAll(path)
-	}
-
-	if err != nil {
+	if err := os.RemoveAll(path); err != nil {
 		desc := fmt.Sprintf("%s [%s]: %v", title, path, err)
 		log.Warn(desc)
 		if err = CreateRepositoryNotice(desc); err != nil {
-			log.Error(4, "CreateRepositoryNotice: %v", err)
+			log.Error(2, "CreateRepositoryNotice: %v", err)
 		}
 	}
 }

models/attachment.go

@@ -15,7 +15,7 @@ import (
 	"github.com/go-xorm/xorm"
 	gouuid "github.com/satori/go.uuid"
 
-	"github.com/gogits/gogs/pkg/setting"
+	"github.com/gogs/gogs/pkg/setting"
 )
 
 // Attachment represent a attachment of issue/comment/release.
@@ -27,7 +27,7 @@ type Attachment struct {
 	ReleaseID int64 `xorm:"INDEX"`
 	Name      string
 
-	Created     time.Time `xorm:"-"`
+	Created     time.Time `xorm:"-" json:"-"`
 	CreatedUnix int64
 }
 
@@ -165,7 +165,6 @@ func DeleteAttachments(attachments []*Attachment, remove bool) (int, error) {
 // DeleteAttachmentsByIssue deletes all attachments associated with the given issue.
 func DeleteAttachmentsByIssue(issueId int64, remove bool) (int, error) {
 	attachments, err := GetAttachmentsByIssueID(issueId)
-
 	if err != nil {
 		return 0, err
 	}
@@ -176,7 +175,6 @@ func DeleteAttachmentsByIssue(issueId int64, remove bool) (int, error) {
 // DeleteAttachmentsByComment deletes all attachments associated with the given comment.
 func DeleteAttachmentsByComment(commentId int64, remove bool) (int, error) {
 	attachments, err := GetAttachmentsByCommentID(commentId)
-
 	if err != nil {
 		return 0, err
 	}

models/comment.go

@@ -13,10 +13,10 @@ import (
 	"github.com/go-xorm/xorm"
 	log "gopkg.in/clog.v1"
 
-	api "github.com/gogits/go-gogs-client"
+	api "github.com/gogs/go-gogs-client"
 
-	"github.com/gogits/gogs/models/errors"
-	"github.com/gogits/gogs/pkg/markup"
+	"github.com/gogs/gogs/models/errors"
+	"github.com/gogs/gogs/pkg/markup"
 )
 
 // CommentType defines whether a comment is just a simple comment, an action (like close) or a reference.
@@ -52,26 +52,26 @@ type Comment struct {
 	ID              int64
 	Type            CommentType
 	PosterID        int64
-	Poster          *User  `xorm:"-"`
+	Poster          *User  `xorm:"-" json:"-"`
 	IssueID         int64  `xorm:"INDEX"`
-	Issue           *Issue `xorm:"-"`
+	Issue           *Issue `xorm:"-" json:"-"`
 	CommitID        int64
 	Line            int64
 	Content         string `xorm:"TEXT"`
-	RenderedContent string `xorm:"-"`
+	RenderedContent string `xorm:"-" json:"-"`
 
-	Created     time.Time `xorm:"-"`
+	Created     time.Time `xorm:"-" json:"-"`
 	CreatedUnix int64
-	Updated     time.Time `xorm:"-"`
+	Updated     time.Time `xorm:"-" json:"-"`
 	UpdatedUnix int64
 
 	// Reference issue in commit message
 	CommitSHA string `xorm:"VARCHAR(40)"`
 
-	Attachments []*Attachment `xorm:"-"`
+	Attachments []*Attachment `xorm:"-" json:"-"`
 
 	// For view issue page.
-	ShowTag CommentTag `xorm:"-"`
+	ShowTag CommentTag `xorm:"-" json:"-"`
 }
 
 func (c *Comment) BeforeInsert() {
@@ -110,6 +110,12 @@ func (c *Comment) loadAttributes(e Engine) (err error) {
 		if err != nil {
 			return fmt.Errorf("getIssueByID [%d]: %v", c.IssueID, err)
 		}
+		if c.Issue.Repo == nil {
+			c.Issue.Repo, err = getRepositoryByID(e, c.Issue.RepoID)
+			if err != nil {
+				return fmt.Errorf("getRepositoryByID [%d]: %v", c.Issue.RepoID, err)
+			}
+		}
 	}
 
 	if c.Attachments == nil {
@@ -126,14 +132,6 @@ func (c *Comment) LoadAttributes() error {
 	return c.loadAttributes(x)
 }
 
-func (c *Comment) AfterDelete() {
-	_, err := DeleteAttachmentsByComment(c.ID, true)
-
-	if err != nil {
-		log.Info("Could not delete files for comment %d on issue #%d: %s", c.ID, c.IssueID, err)
-	}
-}
-
 func (c *Comment) HTMLURL() string {
 	return fmt.Sprintf("%s#issuecomment-%d", c.Issue.HTMLURL(), c.ID)
 }
@@ -182,7 +180,7 @@ func (cmt *Comment) mailParticipants(e Engine, opType ActionType, issue *Issue)
 		issue.Content = fmt.Sprintf("Reopened #%d", issue.Index)
 	}
 	if err = mailIssueCommentToParticipants(issue, cmt.Poster, mentions); err != nil {
-		log.Error(4, "mailIssueCommentToParticipants: %v", err)
+		log.Error(2, "mailIssueCommentToParticipants: %v", err)
 	}
 
 	return nil
@@ -284,10 +282,10 @@ func createComment(e *xorm.Session, opts *CreateCommentOptions) (_ *Comment, err
 	// Notify watchers for whatever action comes in, ignore if no action type.
 	if act.OpType > 0 {
 		if err = notifyWatchers(e, act); err != nil {
-			log.Error(4, "notifyWatchers: %v", err)
+			log.Error(2, "notifyWatchers: %v", err)
 		}
 		if err = comment.mailParticipants(e, act.OpType, opts.Issue); err != nil {
-			log.Error(4, "MailParticipants: %v", err)
+			log.Error(2, "MailParticipants: %v", err)
 		}
 	}
 
@@ -323,7 +321,7 @@ type CreateCommentOptions struct {
 // CreateComment creates comment of issue or commit.
 func CreateComment(opts *CreateCommentOptions) (comment *Comment, err error) {
 	sess := x.NewSession()
-	defer sessionRelease(sess)
+	defer sess.Close()
 	if err = sess.Begin(); err != nil {
 		return nil, err
 	}
@@ -431,9 +429,9 @@ func getCommentsByIssueIDSince(e Engine, issueID, since int64) ([]*Comment, erro
 
 func getCommentsByRepoIDSince(e Engine, repoID, since int64) ([]*Comment, error) {
 	comments := make([]*Comment, 0, 10)
-	sess := e.Where("issue.repo_id = ?", repoID).Join("INNER", "issue", "issue.id = comment.issue_id", repoID).Asc("created_unix")
+	sess := e.Where("issue.repo_id = ?", repoID).Join("INNER", "issue", "issue.id = comment.issue_id").Asc("comment.created_unix")
 	if since > 0 {
-		sess.And("updated_unix >= ?", since)
+		sess.And("comment.updated_unix >= ?", since)
 	}
 	if err := sess.Find(&comments); err != nil {
 		return nil, err
@@ -497,12 +495,12 @@ func DeleteCommentByID(doer *User, id int64) error {
 	}
 
 	sess := x.NewSession()
-	defer sessionRelease(sess)
+	defer sess.Close()
 	if err = sess.Begin(); err != nil {
 		return err
 	}
 
-	if _, err = sess.Id(comment.ID).Delete(new(Comment)); err != nil {
+	if _, err = sess.ID(comment.ID).Delete(new(Comment)); err != nil {
 		return err
 	}
 
@@ -513,7 +511,12 @@ func DeleteCommentByID(doer *User, id int64) error {
 	}
 
 	if err = sess.Commit(); err != nil {
-		return fmt.Errorf("Commit: %v", err)
+		return fmt.Errorf("commit: %v", err)
+	}
+
+	_, err = DeleteAttachmentsByComment(comment.ID, true)
+	if err != nil {
+		log.Error(2, "Failed to delete attachments by comment[%d]: %v", comment.ID, err)
 	}
 
 	if err = comment.Issue.LoadAttributes(); err != nil {

models/error.go

@@ -388,26 +388,6 @@ func (err ErrRepoFileAlreadyExist) Error() string {
 	return fmt.Sprintf("repository file already exists [file_name: %s]", err.FileName)
 }
 
-// __________                             .__
-// \______   \____________    ____   ____ |  |__
-//  |    |  _/\_  __ \__  \  /    \_/ ___\|  |  \
-//  |    |   \ |  | \// __ \|   |  \  \___|   Y  \
-//  |______  / |__|  (____  /___|  /\___  >___|  /
-//         \/             \/     \/     \/     \/
-
-type ErrBranchNotExist struct {
-	Name string
-}
-
-func IsErrBranchNotExist(err error) bool {
-	_, ok := err.(ErrBranchNotExist)
-	return ok
-}
-
-func (err ErrBranchNotExist) Error() string {
-	return fmt.Sprintf("branch does not exist [name: %s]", err.Name)
-}
-
 // __________      .__  .__ __________                                     __
 // \______   \__ __|  | |  |\______   \ ____  ________ __   ____   _______/  |_
 //  |     ___/  |  \  | |  | |       _// __ \/ ____/  |  \_/ __ \ /  ___/\   __\
@@ -525,19 +505,6 @@ func (err ErrAttachmentNotExist) Error() string {
 // |_______ \____/\___  /|__|___|  / /_______  /\____/|____/ |__|    \___  >___  >
 //         \/    /_____/         \/          \/                          \/    \/
 
-type ErrLoginSourceNotExist struct {
-	ID int64
-}
-
-func IsErrLoginSourceNotExist(err error) bool {
-	_, ok := err.(ErrLoginSourceNotExist)
-	return ok
-}
-
-func (err ErrLoginSourceNotExist) Error() string {
-	return fmt.Sprintf("login source does not exist [id: %d]", err.ID)
-}
-
 type ErrLoginSourceAlreadyExist struct {
 	Name string
 }

models/errors/errors.go

@@ -6,6 +6,8 @@ package errors
 
 import "errors"
 
+var InternalServerError = errors.New("internal server error")
+
 // New is a wrapper of real errors.New function.
 func New(text string) error {
 	return errors.New(text)

models/errors/login_source.go

@@ -6,6 +6,19 @@ package errors
 
 import "fmt"
 
+type LoginSourceNotExist struct {
+	ID int64
+}
+
+func IsLoginSourceNotExist(err error) bool {
+	_, ok := err.(LoginSourceNotExist)
+	return ok
+}
+
+func (err LoginSourceNotExist) Error() string {
+	return fmt.Sprintf("login source does not exist [id: %d]", err.ID)
+}
+
 type LoginSourceNotActivated struct {
 	SourceID int64
 }
@@ -31,3 +44,17 @@ func IsInvalidLoginSourceType(err error) bool {
 func (err InvalidLoginSourceType) Error() string {
 	return fmt.Sprintf("invalid login source type [type: %v]", err.Type)
 }
+
+type LoginSourceMismatch struct {
+	Expect int64
+	Actual int64
+}
+
+func IsLoginSourceMismatch(err error) bool {
+	_, ok := err.(LoginSourceMismatch)
+	return ok
+}
+
+func (err LoginSourceMismatch) Error() string {
+	return fmt.Sprintf("login source mismatch [expect: %d, actual: %d]", err.Expect, err.Actual)
+}

models/errors/org.go

@@ -0,0 +1,21 @@
+// Copyright 2018 The Gogs Authors. All rights reserved.
+// Use of this source code is governed by a MIT-style
+// license that can be found in the LICENSE file.
+
+package errors
+
+import "fmt"
+
+type TeamNotExist struct {
+	TeamID int64
+	Name   string
+}
+
+func IsTeamNotExist(err error) bool {
+	_, ok := err.(TeamNotExist)
+	return ok
+}
+
+func (err TeamNotExist) Error() string {
+	return fmt.Sprintf("team does not exist [team_id: %d, name: %s]", err.TeamID, err.Name)
+}

models/errors/repo.go

@@ -59,3 +59,29 @@ func IsMirrorNotExist(err error) bool {
 func (err MirrorNotExist) Error() string {
 	return fmt.Sprintf("mirror does not exist [repo_id: %d]", err.RepoID)
 }
+
+type BranchAlreadyExists struct {
+	Name string
+}
+
+func IsBranchAlreadyExists(err error) bool {
+	_, ok := err.(BranchAlreadyExists)
+	return ok
+}
+
+func (err BranchAlreadyExists) Error() string {
+	return fmt.Sprintf("branch already exists [name: %s]", err.Name)
+}
+
+type ErrBranchNotExist struct {
+	Name string
+}
+
+func IsErrBranchNotExist(err error) bool {
+	_, ok := err.(ErrBranchNotExist)
+	return ok
+}
+
+func (err ErrBranchNotExist) Error() string {
+	return fmt.Sprintf("branch does not exist [name: %s]", err.Name)
+}

models/git_diff.go

@@ -15,11 +15,11 @@ import (
 	"golang.org/x/net/html/charset"
 	"golang.org/x/text/transform"
 
-	"github.com/gogits/git-module"
+	"github.com/gogs/git-module"
 
-	"github.com/gogits/gogs/pkg/tool"
-	"github.com/gogits/gogs/pkg/setting"
-	"github.com/gogits/gogs/pkg/template/highlight"
+	"github.com/gogs/gogs/pkg/setting"
+	"github.com/gogs/gogs/pkg/template/highlight"
+	"github.com/gogs/gogs/pkg/tool"
 )
 
 type DiffSection struct {

models/git_diff_test.go

@@ -8,7 +8,7 @@ import (
 	"html/template"
 	"testing"
 
-	"github.com/gogits/git-module"
+	"github.com/gogs/git-module"
 	dmp "github.com/sergi/go-diff/diffmatchpatch"
 )
 

models/issue.go

@@ -13,11 +13,11 @@ import (
 	"github.com/go-xorm/xorm"
 	log "gopkg.in/clog.v1"
 
-	api "github.com/gogits/go-gogs-client"
+	api "github.com/gogs/go-gogs-client"
 
-	"github.com/gogits/gogs/models/errors"
-	"github.com/gogits/gogs/pkg/setting"
-	"github.com/gogits/gogs/pkg/tool"
+	"github.com/gogs/gogs/models/errors"
+	"github.com/gogs/gogs/pkg/setting"
+	"github.com/gogs/gogs/pkg/tool"
 )
 
 var (
@@ -28,34 +28,34 @@ var (
 type Issue struct {
 	ID              int64
 	RepoID          int64       `xorm:"INDEX UNIQUE(repo_index)"`
-	Repo            *Repository `xorm:"-"`
+	Repo            *Repository `xorm:"-" json:"-"`
 	Index           int64       `xorm:"UNIQUE(repo_index)"` // Index in one repository.
 	PosterID        int64
-	Poster          *User    `xorm:"-"`
+	Poster          *User    `xorm:"-" json:"-"`
 	Title           string   `xorm:"name"`
 	Content         string   `xorm:"TEXT"`
-	RenderedContent string   `xorm:"-"`
-	Labels          []*Label `xorm:"-"`
+	RenderedContent string   `xorm:"-" json:"-"`
+	Labels          []*Label `xorm:"-" json:"-"`
 	MilestoneID     int64
-	Milestone       *Milestone `xorm:"-"`
+	Milestone       *Milestone `xorm:"-" json:"-"`
 	Priority        int
 	AssigneeID      int64
-	Assignee        *User `xorm:"-"`
+	Assignee        *User `xorm:"-" json:"-"`
 	IsClosed        bool
-	IsRead          bool         `xorm:"-"`
+	IsRead          bool         `xorm:"-" json:"-"`
 	IsPull          bool         // Indicates whether is a pull request or not.
-	PullRequest     *PullRequest `xorm:"-"`
+	PullRequest     *PullRequest `xorm:"-" json:"-"`
 	NumComments     int
 
-	Deadline     time.Time `xorm:"-"`
+	Deadline     time.Time `xorm:"-" json:"-"`
 	DeadlineUnix int64
-	Created      time.Time `xorm:"-"`
+	Created      time.Time `xorm:"-" json:"-"`
 	CreatedUnix  int64
-	Updated      time.Time `xorm:"-"`
+	Updated      time.Time `xorm:"-" json:"-"`
 	UpdatedUnix  int64
 
-	Attachments []*Attachment `xorm:"-"`
-	Comments    []*Comment    `xorm:"-"`
+	Attachments []*Attachment `xorm:"-" json:"-"`
+	Comments    []*Comment    `xorm:"-" json:"-"`
 }
 
 func (issue *Issue) BeforeInsert() {
@@ -160,8 +160,8 @@ func (issue *Issue) HTMLURL() string {
 }
 
 // State returns string representation of issue status.
-func (i *Issue) State() api.StateType {
-	if i.IsClosed {
+func (issue *Issue) State() api.StateType {
+	if issue.IsClosed {
 		return api.STATE_CLOSED
 	}
 	return api.STATE_OPEN
@@ -208,22 +208,22 @@ func (issue *Issue) APIFormat() *api.Issue {
 }
 
 // HashTag returns unique hash tag for issue.
-func (i *Issue) HashTag() string {
-	return "issue-" + com.ToStr(i.ID)
+func (issue *Issue) HashTag() string {
+	return "issue-" + com.ToStr(issue.ID)
 }
 
 // IsPoster returns true if given user by ID is the poster.
-func (i *Issue) IsPoster(uid int64) bool {
-	return i.PosterID == uid
+func (issue *Issue) IsPoster(uid int64) bool {
+	return issue.PosterID == uid
 }
 
-func (i *Issue) hasLabel(e Engine, labelID int64) bool {
-	return hasIssueLabel(e, i.ID, labelID)
+func (issue *Issue) hasLabel(e Engine, labelID int64) bool {
+	return hasIssueLabel(e, issue.ID, labelID)
 }
 
 // HasLabel returns true if issue has been labeled by given ID.
-func (i *Issue) HasLabel(labelID int64) bool {
-	return i.hasLabel(x, labelID)
+func (issue *Issue) HasLabel(labelID int64) bool {
+	return issue.hasLabel(x, labelID)
 }
 
 func (issue *Issue) sendLabelUpdatedWebhook(doer *User) {
@@ -255,8 +255,8 @@ func (issue *Issue) sendLabelUpdatedWebhook(doer *User) {
 	}
 }
 
-func (i *Issue) addLabel(e *xorm.Session, label *Label) error {
-	return newIssueLabel(e, i, label)
+func (issue *Issue) addLabel(e *xorm.Session, label *Label) error {
+	return newIssueLabel(e, issue, label)
 }
 
 // AddLabel adds a new label to the issue.
@@ -314,8 +314,13 @@ func (issue *Issue) clearLabels(e *xorm.Session) (err error) {
 		return fmt.Errorf("getLabels: %v", err)
 	}
 
+	// NOTE: issue.removeLabel slices issue.Labels, so we need to create another slice to be unaffected.
+	labels := make([]*Label, len(issue.Labels))
 	for i := range issue.Labels {
-		if err = issue.removeLabel(e, issue.Labels[i]); err != nil {
+		labels[i] = issue.Labels[i]
+	}
+	for i := range labels {
+		if err = issue.removeLabel(e, labels[i]); err != nil {
 			return fmt.Errorf("removeLabel: %v", err)
 		}
 	}
@@ -325,7 +330,7 @@ func (issue *Issue) clearLabels(e *xorm.Session) (err error) {
 
 func (issue *Issue) ClearLabels(doer *User) (err error) {
 	sess := x.NewSession()
-	defer sessionRelease(sess)
+	defer sess.Close()
 	if err = sess.Begin(); err != nil {
 		return err
 	}
@@ -370,7 +375,7 @@ func (issue *Issue) ClearLabels(doer *User) (err error) {
 // ReplaceLabels removes all current labels and add new labels to the issue.
 func (issue *Issue) ReplaceLabels(labels []*Label) (err error) {
 	sess := x.NewSession()
-	defer sessionRelease(sess)
+	defer sess.Close()
 	if err = sess.Begin(); err != nil {
 		return err
 	}
@@ -384,12 +389,12 @@ func (issue *Issue) ReplaceLabels(labels []*Label) (err error) {
 	return sess.Commit()
 }
 
-func (i *Issue) GetAssignee() (err error) {
-	if i.AssigneeID == 0 || i.Assignee != nil {
+func (issue *Issue) GetAssignee() (err error) {
+	if issue.AssigneeID == 0 || issue.Assignee != nil {
 		return nil
 	}
 
-	i.Assignee, err = GetUserByID(i.AssigneeID)
+	issue.Assignee, err = GetUserByID(issue.AssigneeID)
 	if errors.IsUserNotExist(err) {
 		return nil
 	}
@@ -397,12 +402,12 @@ func (i *Issue) GetAssignee() (err error) {
 }
 
 // ReadBy sets issue to be read by given user.
-func (i *Issue) ReadBy(uid int64) error {
-	return UpdateIssueUserByRead(uid, i.ID)
+func (issue *Issue) ReadBy(uid int64) error {
+	return UpdateIssueUserByRead(uid, issue.ID)
 }
 
 func updateIssueCols(e Engine, issue *Issue, cols ...string) error {
-	_, err := e.Id(issue.ID).Cols(cols...).Update(issue)
+	_, err := e.ID(issue.ID).Cols(cols...).Update(issue)
 	return err
 }
 
@@ -411,41 +416,41 @@ func UpdateIssueCols(issue *Issue, cols ...string) error {
 	return updateIssueCols(x, issue, cols...)
 }
 
-func (i *Issue) changeStatus(e *xorm.Session, doer *User, repo *Repository, isClosed bool) (err error) {
+func (issue *Issue) changeStatus(e *xorm.Session, doer *User, repo *Repository, isClosed bool) (err error) {
 	// Nothing should be performed if current status is same as target status
-	if i.IsClosed == isClosed {
+	if issue.IsClosed == isClosed {
 		return nil
 	}
-	i.IsClosed = isClosed
+	issue.IsClosed = isClosed
 
-	if err = updateIssueCols(e, i, "is_closed"); err != nil {
+	if err = updateIssueCols(e, issue, "is_closed"); err != nil {
 		return err
-	} else if err = updateIssueUsersByStatus(e, i.ID, isClosed); err != nil {
+	} else if err = updateIssueUsersByStatus(e, issue.ID, isClosed); err != nil {
 		return err
 	}
 
 	// Update issue count of labels
-	if err = i.getLabels(e); err != nil {
+	if err = issue.getLabels(e); err != nil {
 		return err
 	}
-	for idx := range i.Labels {
-		if i.IsClosed {
-			i.Labels[idx].NumClosedIssues++
+	for idx := range issue.Labels {
+		if issue.IsClosed {
+			issue.Labels[idx].NumClosedIssues++
 		} else {
-			i.Labels[idx].NumClosedIssues--
+			issue.Labels[idx].NumClosedIssues--
 		}
-		if err = updateLabel(e, i.Labels[idx]); err != nil {
+		if err = updateLabel(e, issue.Labels[idx]); err != nil {
 			return err
 		}
 	}
 
 	// Update issue count of milestone
-	if err = changeMilestoneIssueStats(e, i); err != nil {
+	if err = changeMilestoneIssueStats(e, issue); err != nil {
 		return err
 	}
 
 	// New action comment
-	if _, err = createStatusComment(e, doer, repo, i); err != nil {
+	if _, err = createStatusComment(e, doer, repo, issue); err != nil {
 		return err
 	}
 
@@ -455,7 +460,7 @@ func (i *Issue) changeStatus(e *xorm.Session, doer *User, repo *Repository, isCl
 // ChangeStatus changes issue status to open or closed.
 func (issue *Issue) ChangeStatus(doer *User, repo *Repository, isClosed bool) (err error) {
 	sess := x.NewSession()
-	defer sessionRelease(sess)
+	defer sess.Close()
 	if err = sess.Begin(); err != nil {
 		return err
 	}
@@ -744,7 +749,7 @@ func newIssue(e *xorm.Session, opts NewIssueOptions) (err error) {
 // NewIssue creates new issue with labels and attachments for repository.
 func NewIssue(repo *Repository, issue *Issue, labelIDs []int64, uuids []string) (err error) {
 	sess := x.NewSession()
-	defer sessionRelease(sess)
+	defer sess.Close()
 	if err = sess.Begin(); err != nil {
 		return err
 	}
@@ -799,9 +804,9 @@ func GetIssueByRef(ref string) (*Issue, error) {
 		return nil, errors.InvalidIssueReference{ref}
 	}
 
-	index, err := com.StrTo(ref[n+1:]).Int64()
-	if err != nil {
-		return nil, err
+	index := com.StrTo(ref[n+1:]).MustInt64()
+	if index == 0 {
+		return nil, errors.IssueNotExist{}
 	}
 
 	repo, err := GetRepositoryByRef(ref[:n])
@@ -843,7 +848,7 @@ func GetIssueByIndex(repoID, index int64) (*Issue, error) {
 
 func getRawIssueByID(e Engine, id int64) (*Issue, error) {
 	issue := new(Issue)
-	has, err := e.Id(id).Get(issue)
+	has, err := e.ID(id).Get(issue)
 	if err != nil {
 		return nil, err
 	} else if !has {
@@ -1062,7 +1067,7 @@ func newIssueUsers(e *xorm.Session, repo *Repository, issue *Issue) error {
 // NewIssueUsers adds new issue-user relations for new issue of repository.
 func NewIssueUsers(repo *Repository, issue *Issue) (err error) {
 	sess := x.NewSession()
-	defer sessionRelease(sess)
+	defer sess.Close()
 	if err = sess.Begin(); err != nil {
 		return err
 	}
@@ -1354,7 +1359,7 @@ func GetRepoIssueStats(repoID, userID int64, filterMode FilterMode, isPull bool)
 }
 
 func updateIssue(e Engine, issue *Issue) error {
-	_, err := e.Id(issue.ID).AllCols().Update(issue)
+	_, err := e.ID(issue.ID).AllCols().Update(issue)
 	return err
 }
 
@@ -1391,7 +1396,7 @@ func updateIssueUserByAssignee(e *xorm.Session, issue *Issue) (err error) {
 // UpdateIssueUserByAssignee updates issue-user relation for assignee.
 func UpdateIssueUserByAssignee(issue *Issue) (err error) {
 	sess := x.NewSession()
-	defer sessionRelease(sess)
+	defer sess.Close()
 	if err = sess.Begin(); err != nil {
 		return err
 	}
@@ -1423,7 +1428,7 @@ func updateIssueUsersByMentions(e Engine, issueID int64, uids []int64) error {
 
 		iu.IsMentioned = true
 		if has {
-			_, err = e.Id(iu.ID).AllCols().Update(iu)
+			_, err = e.ID(iu.ID).AllCols().Update(iu)
 		} else {
 			_, err = e.Insert(iu)
 		}

models/issue_label.go

@@ -13,9 +13,9 @@ import (
 
 	"github.com/go-xorm/xorm"
 
-	api "github.com/gogits/go-gogs-client"
+	api "github.com/gogs/go-gogs-client"
 
-	"github.com/gogits/gogs/pkg/tool"
+	"github.com/gogs/gogs/pkg/tool"
 )
 
 var labelColorPattern = regexp.MustCompile("#([a-fA-F0-9]{6})")
@@ -60,8 +60,8 @@ type Label struct {
 	Color           string `xorm:"VARCHAR(7)"`
 	NumIssues       int
 	NumClosedIssues int
-	NumOpenIssues   int  `xorm:"-"`
-	IsChecked       bool `xorm:"-"`
+	NumOpenIssues   int  `xorm:"-" json:"-"`
+	IsChecked       bool `xorm:"-" json:"-"`
 }
 
 func (label *Label) APIFormat() *api.Label {
@@ -196,7 +196,7 @@ func GetLabelsByIssueID(issueID int64) ([]*Label, error) {
 }
 
 func updateLabel(e Engine, l *Label) error {
-	_, err := e.Id(l.ID).AllCols().Update(l)
+	_, err := e.ID(l.ID).AllCols().Update(l)
 	return err
 }
 
@@ -216,12 +216,12 @@ func DeleteLabel(repoID, labelID int64) error {
 	}
 
 	sess := x.NewSession()
-	defer sessionRelease(sess)
+	defer sess.Close()
 	if err = sess.Begin(); err != nil {
 		return err
 	}
 
-	if _, err = sess.Id(labelID).Delete(new(Label)); err != nil {
+	if _, err = sess.ID(labelID).Delete(new(Label)); err != nil {
 		return err
 	} else if _, err = sess.Where("label_id = ?", labelID).Delete(new(IssueLabel)); err != nil {
 		return err
@@ -282,7 +282,7 @@ func NewIssueLabel(issue *Issue, label *Label) (err error) {
 	}
 
 	sess := x.NewSession()
-	defer sessionRelease(sess)
+	defer sess.Close()
 	if err = sess.Begin(); err != nil {
 		return err
 	}
@@ -311,7 +311,7 @@ func newIssueLabels(e *xorm.Session, issue *Issue, labels []*Label) (err error)
 // NewIssueLabels creates a list of issue-label relations.
 func NewIssueLabels(issue *Issue, labels []*Label) (err error) {
 	sess := x.NewSession()
-	defer sessionRelease(sess)
+	defer sess.Close()
 	if err = sess.Begin(); err != nil {
 		return err
 	}
@@ -361,7 +361,7 @@ func deleteIssueLabel(e *xorm.Session, issue *Issue, label *Label) (err error) {
 // DeleteIssueLabel deletes issue-label relation.
 func DeleteIssueLabel(issue *Issue, label *Label) (err error) {
 	sess := x.NewSession()
-	defer sessionRelease(sess)
+	defer sess.Close()
 	if err = sess.Begin(); err != nil {
 		return err
 	}

models/issue_mail.go

@@ -10,9 +10,9 @@ import (
 	"github.com/Unknwon/com"
 	log "gopkg.in/clog.v1"
 
-	"github.com/gogits/gogs/pkg/mailer"
-	"github.com/gogits/gogs/pkg/markup"
-	"github.com/gogits/gogs/pkg/setting"
+	"github.com/gogs/gogs/pkg/mailer"
+	"github.com/gogs/gogs/pkg/markup"
+	"github.com/gogs/gogs/pkg/setting"
 )
 
 func (issue *Issue) MailSubject() string {
@@ -92,7 +92,7 @@ func NewMailerIssue(issue *Issue) mailer.Issue {
 
 // mailIssueCommentToParticipants can be used for both new issue creation and comment.
 // This functions sends two list of emails:
-// 1. Repository watchers and users who are participated in comments.
+// 1. Repository watchers, users who participated in comments and the assignee.
 // 2. Users who are not in 1. but get mentioned in current issue/comment.
 func mailIssueCommentToParticipants(issue *Issue, doer *User, mentions []string) error {
 	if !setting.Service.EnableNotifyMail {
@@ -142,6 +142,12 @@ func mailIssueCommentToParticipants(issue *Issue, doer *User, mentions []string)
 		tos = append(tos, participants[i].Email)
 		names = append(names, participants[i].Name)
 	}
+	if issue.Assignee != nil && issue.Assignee.ID != doer.ID {
+		if !com.IsSliceContainsStr(names, issue.Assignee.Name) {
+			tos = append(tos, issue.Assignee.Email)
+			names = append(names, issue.Assignee.Name)
+		}
+	}
 	mailer.SendIssueCommentMail(NewMailerIssue(issue), NewMailerRepo(issue.Repo), NewMailerUser(doer), tos)
 
 	// Mail mentioned people and exclude watchers.
@@ -155,7 +161,6 @@ func mailIssueCommentToParticipants(issue *Issue, doer *User, mentions []string)
 		tos = append(tos, mentions[i])
 	}
 	mailer.SendIssueMentionMail(NewMailerIssue(issue), NewMailerRepo(issue.Repo), NewMailerUser(doer), GetUserEmailsByNames(tos))
-
 	return nil
 }
 
@@ -168,7 +173,7 @@ func (issue *Issue) MailParticipants() (err error) {
 	}
 
 	if err = mailIssueCommentToParticipants(issue, issue.Poster, mentions); err != nil {
-		log.Error(4, "mailIssueCommentToParticipants: %v", err)
+		log.Error(2, "mailIssueCommentToParticipants: %v", err)
 	}
 
 	return nil

models/login_source.go

@@ -2,26 +2,33 @@
 // Use of this source code is governed by a MIT-style
 // license that can be found in the LICENSE file.
 
+// FIXME: Put this file into its own package and separate into different files based on login sources.
 package models
 
 import (
 	"crypto/tls"
-	"encoding/json"
 	"fmt"
 	"net/smtp"
 	"net/textproto"
+	"os"
+	"path"
 	"strings"
+	"sync"
 	"time"
 
 	"github.com/Unknwon/com"
 	"github.com/go-macaron/binding"
 	"github.com/go-xorm/core"
 	"github.com/go-xorm/xorm"
+	"github.com/json-iterator/go"
 	log "gopkg.in/clog.v1"
+	"gopkg.in/ini.v1"
 
-	"github.com/gogits/gogs/models/errors"
-	"github.com/gogits/gogs/pkg/auth/ldap"
-	"github.com/gogits/gogs/pkg/auth/pam"
+	"github.com/gogs/gogs/models/errors"
+	"github.com/gogs/gogs/pkg/auth/github"
+	"github.com/gogs/gogs/pkg/auth/ldap"
+	"github.com/gogs/gogs/pkg/auth/pam"
+	"github.com/gogs/gogs/pkg/setting"
 )
 
 type LoginType int
@@ -34,13 +41,15 @@ const (
 	LOGIN_SMTP             // 3
 	LOGIN_PAM              // 4
 	LOGIN_DLDAP            // 5
+	LOGIN_GITHUB           // 6
 )
 
 var LoginNames = map[LoginType]string{
-	LOGIN_LDAP:  "LDAP (via BindDN)",
-	LOGIN_DLDAP: "LDAP (simple auth)", // Via direct bind
-	LOGIN_SMTP:  "SMTP",
-	LOGIN_PAM:   "PAM",
+	LOGIN_LDAP:   "LDAP (via BindDN)",
+	LOGIN_DLDAP:  "LDAP (simple auth)", // Via direct bind
+	LOGIN_SMTP:   "SMTP",
+	LOGIN_PAM:    "PAM",
+	LOGIN_GITHUB: "GitHub",
 }
 
 var SecurityProtocolNames = map[ldap.SecurityProtocol]string{
@@ -54,18 +63,19 @@ var (
 	_ core.Conversion = &LDAPConfig{}
 	_ core.Conversion = &SMTPConfig{}
 	_ core.Conversion = &PAMConfig{}
+	_ core.Conversion = &GitHubConfig{}
 )
 
 type LDAPConfig struct {
-	*ldap.Source
+	*ldap.Source `ini:"config"`
 }
 
 func (cfg *LDAPConfig) FromDB(bs []byte) error {
-	return json.Unmarshal(bs, &cfg)
+	return jsoniter.Unmarshal(bs, &cfg)
 }
 
 func (cfg *LDAPConfig) ToDB() ([]byte, error) {
-	return json.Marshal(cfg)
+	return jsoniter.Marshal(cfg)
 }
 
 func (cfg *LDAPConfig) SecurityProtocolName() string {
@@ -77,28 +87,61 @@ type SMTPConfig struct {
 	Host           string
 	Port           int
 	AllowedDomains string `xorm:"TEXT"`
-	TLS            bool
+	TLS            bool   `ini:"tls"`
 	SkipVerify     bool
 }
 
 func (cfg *SMTPConfig) FromDB(bs []byte) error {
-	return json.Unmarshal(bs, cfg)
+	return jsoniter.Unmarshal(bs, cfg)
 }
 
 func (cfg *SMTPConfig) ToDB() ([]byte, error) {
-	return json.Marshal(cfg)
+	return jsoniter.Marshal(cfg)
 }
 
 type PAMConfig struct {
-	ServiceName string // pam service (e.g. system-auth)
+	ServiceName string // PAM service (e.g. system-auth)
 }
 
 func (cfg *PAMConfig) FromDB(bs []byte) error {
-	return json.Unmarshal(bs, &cfg)
+	return jsoniter.Unmarshal(bs, &cfg)
 }
 
 func (cfg *PAMConfig) ToDB() ([]byte, error) {
-	return json.Marshal(cfg)
+	return jsoniter.Marshal(cfg)
+}
+
+type GitHubConfig struct {
+	APIEndpoint string // GitHub service (e.g. https://api.github.com/)
+}
+
+func (cfg *GitHubConfig) FromDB(bs []byte) error {
+	return jsoniter.Unmarshal(bs, &cfg)
+}
+
+func (cfg *GitHubConfig) ToDB() ([]byte, error) {
+	return jsoniter.Marshal(cfg)
+}
+
+// AuthSourceFile contains information of an authentication source file.
+type AuthSourceFile struct {
+	abspath string
+	file    *ini.File
+}
+
+// SetGeneral sets new value to the given key in the general (default) section.
+func (f *AuthSourceFile) SetGeneral(name, value string) {
+	f.file.Section("").Key(name).SetValue(value)
+}
+
+// SetConfig sets new values to the "config" section.
+func (f *AuthSourceFile) SetConfig(cfg core.Conversion) error {
+	return f.file.Section("config").ReflectFrom(cfg)
+}
+
+// Save writes updates into file system.
+func (f *AuthSourceFile) Save() error {
+	return f.file.SaveTo(f.abspath)
 }
 
 // LoginSource represents an external way for authorizing users.
@@ -107,12 +150,15 @@ type LoginSource struct {
 	Type      LoginType
 	Name      string          `xorm:"UNIQUE"`
 	IsActived bool            `xorm:"NOT NULL DEFAULT false"`
+	IsDefault bool            `xorm:"DEFAULT false"`
 	Cfg       core.Conversion `xorm:"TEXT"`
 
-	Created     time.Time `xorm:"-"`
+	Created     time.Time `xorm:"-" json:"-"`
 	CreatedUnix int64
-	Updated     time.Time `xorm:"-"`
+	Updated     time.Time `xorm:"-" json:"-"`
 	UpdatedUnix int64
+
+	LocalFile *AuthSourceFile `xorm:"-" json:"-"`
 }
 
 func (s *LoginSource) BeforeInsert() {
@@ -135,16 +181,18 @@ func Cell2Int64(val xorm.Cell) int64 {
 	return (*val).(int64)
 }
 
-func (source *LoginSource) BeforeSet(colName string, val xorm.Cell) {
+func (s *LoginSource) BeforeSet(colName string, val xorm.Cell) {
 	switch colName {
 	case "type":
 		switch LoginType(Cell2Int64(val)) {
 		case LOGIN_LDAP, LOGIN_DLDAP:
-			source.Cfg = new(LDAPConfig)
+			s.Cfg = new(LDAPConfig)
 		case LOGIN_SMTP:
-			source.Cfg = new(SMTPConfig)
+			s.Cfg = new(SMTPConfig)
 		case LOGIN_PAM:
-			source.Cfg = new(PAMConfig)
+			s.Cfg = new(PAMConfig)
+		case LOGIN_GITHUB:
+			s.Cfg = new(GitHubConfig)
 		default:
 			panic("unrecognized login source type: " + com.ToStr(*val))
 		}
@@ -160,65 +208,74 @@ func (s *LoginSource) AfterSet(colName string, _ xorm.Cell) {
 	}
 }
 
-func (source *LoginSource) TypeName() string {
-	return LoginNames[source.Type]
+func (s *LoginSource) TypeName() string {
+	return LoginNames[s.Type]
 }
 
-func (source *LoginSource) IsLDAP() bool {
-	return source.Type == LOGIN_LDAP
+func (s *LoginSource) IsLDAP() bool {
+	return s.Type == LOGIN_LDAP
 }
 
-func (source *LoginSource) IsDLDAP() bool {
-	return source.Type == LOGIN_DLDAP
+func (s *LoginSource) IsDLDAP() bool {
+	return s.Type == LOGIN_DLDAP
 }
 
-func (source *LoginSource) IsSMTP() bool {
-	return source.Type == LOGIN_SMTP
+func (s *LoginSource) IsSMTP() bool {
+	return s.Type == LOGIN_SMTP
 }
 
-func (source *LoginSource) IsPAM() bool {
-	return source.Type == LOGIN_PAM
+func (s *LoginSource) IsPAM() bool {
+	return s.Type == LOGIN_PAM
 }
 
-func (source *LoginSource) HasTLS() bool {
-	return ((source.IsLDAP() || source.IsDLDAP()) &&
-		source.LDAP().SecurityProtocol > ldap.SECURITY_PROTOCOL_UNENCRYPTED) ||
-		source.IsSMTP()
+func (s *LoginSource) IsGitHub() bool {
+	return s.Type == LOGIN_GITHUB
 }
 
-func (source *LoginSource) UseTLS() bool {
-	switch source.Type {
+func (s *LoginSource) HasTLS() bool {
+	return ((s.IsLDAP() || s.IsDLDAP()) &&
+		s.LDAP().SecurityProtocol > ldap.SECURITY_PROTOCOL_UNENCRYPTED) ||
+		s.IsSMTP()
+}
+
+func (s *LoginSource) UseTLS() bool {
+	switch s.Type {
 	case LOGIN_LDAP, LOGIN_DLDAP:
-		return source.LDAP().SecurityProtocol != ldap.SECURITY_PROTOCOL_UNENCRYPTED
+		return s.LDAP().SecurityProtocol != ldap.SECURITY_PROTOCOL_UNENCRYPTED
 	case LOGIN_SMTP:
-		return source.SMTP().TLS
+		return s.SMTP().TLS
 	}
 
 	return false
 }
 
-func (source *LoginSource) SkipVerify() bool {
-	switch source.Type {
+func (s *LoginSource) SkipVerify() bool {
+	switch s.Type {
 	case LOGIN_LDAP, LOGIN_DLDAP:
-		return source.LDAP().SkipVerify
+		return s.LDAP().SkipVerify
 	case LOGIN_SMTP:
-		return source.SMTP().SkipVerify
+		return s.SMTP().SkipVerify
 	}
 
 	return false
 }
 
-func (source *LoginSource) LDAP() *LDAPConfig {
-	return source.Cfg.(*LDAPConfig)
+func (s *LoginSource) LDAP() *LDAPConfig {
+	return s.Cfg.(*LDAPConfig)
 }
 
-func (source *LoginSource) SMTP() *SMTPConfig {
-	return source.Cfg.(*SMTPConfig)
+func (s *LoginSource) SMTP() *SMTPConfig {
+	return s.Cfg.(*SMTPConfig)
 }
 
-func (source *LoginSource) PAM() *PAMConfig {
-	return source.Cfg.(*PAMConfig)
+func (s *LoginSource) PAM() *PAMConfig {
+	return s.Cfg.(*PAMConfig)
 }
+
+func (s *LoginSource) GitHub() *GitHubConfig {
+	return s.Cfg.(*GitHubConfig)
+}
+
 func CreateLoginSource(source *LoginSource) error {
 	has, err := x.Get(&LoginSource{Name: source.Name})
 	if err != nil {
@@ -228,12 +285,31 @@ func CreateLoginSource(source *LoginSource) error {
 	}
 
 	_, err = x.Insert(source)
-	return err
+	if err != nil {
+		return err
+	} else if source.IsDefault {
+		return ResetNonDefaultLoginSources(source)
+	}
+	return nil
 }
 
+// LoginSources returns all login sources defined.
 func LoginSources() ([]*LoginSource, error) {
-	auths := make([]*LoginSource, 0, 5)
-	return auths, x.Find(&auths)
+	sources := make([]*LoginSource, 0, 2)
+	if err := x.Find(&sources); err != nil {
+		return nil, err
+	}
+
+	return append(sources, localLoginSources.List()...), nil
+}
+
+// ActivatedLoginSources returns login sources that are currently activated.
+func ActivatedLoginSources() ([]*LoginSource, error) {
+	sources := make([]*LoginSource, 0, 2)
+	if err := x.Where("is_actived = ?", true).Find(&sources); err != nil {
+		return nil, fmt.Errorf("find activated login sources: %v", err)
+	}
+	return append(sources, localLoginSources.ActivatedList()...), nil
 }
 
 // GetLoginSourceByID returns login source by given ID.
@@ -243,14 +319,53 @@ func GetLoginSourceByID(id int64) (*LoginSource, error) {
 	if err != nil {
 		return nil, err
 	} else if !has {
-		return nil, ErrLoginSourceNotExist{id}
+		return localLoginSources.GetLoginSourceByID(id)
 	}
 	return source, nil
 }
 
-func UpdateSource(source *LoginSource) error {
-	_, err := x.Id(source.ID).AllCols().Update(source)
-	return err
+// ResetNonDefaultLoginSources clean other default source flag
+func ResetNonDefaultLoginSources(source *LoginSource) error {
+	// update changes to DB
+	if _, err := x.NotIn("id", []int64{source.ID}).Cols("is_default").Update(&LoginSource{IsDefault: false}); err != nil {
+		return err
+	}
+	// write changes to local authentications
+	for i := range localLoginSources.sources {
+		if localLoginSources.sources[i].LocalFile != nil && localLoginSources.sources[i].ID != source.ID {
+			localLoginSources.sources[i].LocalFile.SetGeneral("is_default", "false")
+			if err := localLoginSources.sources[i].LocalFile.SetConfig(source.Cfg); err != nil {
+				return fmt.Errorf("LocalFile.SetConfig: %v", err)
+			} else if err = localLoginSources.sources[i].LocalFile.Save(); err != nil {
+				return fmt.Errorf("LocalFile.Save: %v", err)
+			}
+		}
+	}
+	// flush memory so that web page can show the same behaviors
+	localLoginSources.UpdateLoginSource(source)
+	return nil
+}
+
+// UpdateLoginSource updates information of login source to database or local file.
+func UpdateLoginSource(source *LoginSource) error {
+	if source.LocalFile == nil {
+		if _, err := x.Id(source.ID).AllCols().Update(source); err != nil {
+			return err
+		} else {
+			return ResetNonDefaultLoginSources(source)
+		}
+
+	}
+
+	source.LocalFile.SetGeneral("name", source.Name)
+	source.LocalFile.SetGeneral("is_activated", com.ToStr(source.IsActived))
+	source.LocalFile.SetGeneral("is_default", com.ToStr(source.IsDefault))
+	if err := source.LocalFile.SetConfig(source.Cfg); err != nil {
+		return fmt.Errorf("LocalFile.SetConfig: %v", err)
+	} else if err = source.LocalFile.Save(); err != nil {
+		return fmt.Errorf("LocalFile.Save: %v", err)
+	}
+	return ResetNonDefaultLoginSources(source)
 }
 
 func DeleteSource(source *LoginSource) error {
@@ -264,10 +379,155 @@ func DeleteSource(source *LoginSource) error {
 	return err
 }
 
-// CountLoginSources returns number of login sources.
+// CountLoginSources returns total number of login sources.
 func CountLoginSources() int64 {
 	count, _ := x.Count(new(LoginSource))
-	return count
+	return count + int64(localLoginSources.Len())
+}
+
+// LocalLoginSources contains authentication sources configured and loaded from local files.
+// Calling its methods is thread-safe; otherwise, please maintain the mutex accordingly.
+type LocalLoginSources struct {
+	sync.RWMutex
+	sources []*LoginSource
+}
+
+func (s *LocalLoginSources) Len() int {
+	return len(s.sources)
+}
+
+// List returns full clone of login sources.
+func (s *LocalLoginSources) List() []*LoginSource {
+	s.RLock()
+	defer s.RUnlock()
+
+	list := make([]*LoginSource, s.Len())
+	for i := range s.sources {
+		list[i] = &LoginSource{}
+		*list[i] = *s.sources[i]
+	}
+	return list
+}
+
+// ActivatedList returns clone of activated login sources.
+func (s *LocalLoginSources) ActivatedList() []*LoginSource {
+	s.RLock()
+	defer s.RUnlock()
+
+	list := make([]*LoginSource, 0, 2)
+	for i := range s.sources {
+		if !s.sources[i].IsActived {
+			continue
+		}
+		source := &LoginSource{}
+		*source = *s.sources[i]
+		list = append(list, source)
+	}
+	return list
+}
+
+// GetLoginSourceByID returns a clone of login source by given ID.
+func (s *LocalLoginSources) GetLoginSourceByID(id int64) (*LoginSource, error) {
+	s.RLock()
+	defer s.RUnlock()
+
+	for i := range s.sources {
+		if s.sources[i].ID == id {
+			source := &LoginSource{}
+			*source = *s.sources[i]
+			return source, nil
+		}
+	}
+
+	return nil, errors.LoginSourceNotExist{id}
+}
+
+// UpdateLoginSource updates in-memory copy of the authentication source.
+func (s *LocalLoginSources) UpdateLoginSource(source *LoginSource) {
+	s.Lock()
+	defer s.Unlock()
+
+	source.Updated = time.Now()
+	for i := range s.sources {
+		if s.sources[i].ID == source.ID {
+			*s.sources[i] = *source
+		} else if source.IsDefault {
+			s.sources[i].IsDefault = false
+		}
+	}
+}
+
+var localLoginSources = &LocalLoginSources{}
+
+// LoadAuthSources loads authentication sources from local files
+// and converts them into login sources.
+func LoadAuthSources() {
+	authdPath := path.Join(setting.CustomPath, "conf/auth.d")
+	if !com.IsDir(authdPath) {
+		return
+	}
+
+	paths, err := com.GetFileListBySuffix(authdPath, ".conf")
+	if err != nil {
+		log.Fatal(2, "Failed to list authentication sources: %v", err)
+	}
+
+	localLoginSources.sources = make([]*LoginSource, 0, len(paths))
+
+	for _, fpath := range paths {
+		authSource, err := ini.Load(fpath)
+		if err != nil {
+			log.Fatal(2, "Failed to load authentication source: %v", err)
+		}
+		authSource.NameMapper = ini.TitleUnderscore
+
+		// Set general attributes
+		s := authSource.Section("")
+		loginSource := &LoginSource{
+			ID:        s.Key("id").MustInt64(),
+			Name:      s.Key("name").String(),
+			IsActived: s.Key("is_activated").MustBool(),
+			IsDefault: s.Key("is_default").MustBool(),
+			LocalFile: &AuthSourceFile{
+				abspath: fpath,
+				file:    authSource,
+			},
+		}
+
+		fi, err := os.Stat(fpath)
+		if err != nil {
+			log.Fatal(2, "Failed to load authentication source: %v", err)
+		}
+		loginSource.Updated = fi.ModTime()
+
+		// Parse authentication source file
+		authType := s.Key("type").String()
+		switch authType {
+		case "ldap_bind_dn":
+			loginSource.Type = LOGIN_LDAP
+			loginSource.Cfg = &LDAPConfig{}
+		case "ldap_simple_auth":
+			loginSource.Type = LOGIN_DLDAP
+			loginSource.Cfg = &LDAPConfig{}
+		case "smtp":
+			loginSource.Type = LOGIN_SMTP
+			loginSource.Cfg = &SMTPConfig{}
+		case "pam":
+			loginSource.Type = LOGIN_PAM
+			loginSource.Cfg = &PAMConfig{}
+		case "github":
+			loginSource.Type = LOGIN_GITHUB
+			loginSource.Cfg = &GitHubConfig{}
+		default:
+			log.Fatal(2, "Failed to load authentication source: unknown type '%s'", authType)
+		}
+
+		if err = authSource.Section("config").MapTo(loginSource.Cfg); err != nil {
+			log.Fatal(2, "Failed to parse authentication source 'config': %v", err)
+		}
+
+		localLoginSources.sources = append(localLoginSources.sources, loginSource)
+	}
 }
 
 // .____     ________      _____ __________
@@ -497,7 +757,42 @@ func LoginViaPAM(user *User, login, password string, sourceID int64, cfg *PAMCon
 	return user, CreateUser(user)
 }
 
-func ExternalUserLogin(user *User, login, password string, source *LoginSource, autoRegister bool) (*User, error) {
+//________.__  __     ___ ___      ___.
+///  _____/|__|/  |_  /   |   \ __ _\_ |__
+///   \  ___|  \   __\/    ~    \  |  \ __ \
+//\    \_\  \  ||  |  \    Y    /  |  / \_\ \
+//\______  /__||__|   \___|_  /|____/|___  /
+//\/                 \/           \/
+
+func LoginViaGitHub(user *User, login, password string, sourceID int64, cfg *GitHubConfig, autoRegister bool) (*User, error) {
+	fullname, email, url, location, err := github.Authenticate(cfg.APIEndpoint, login, password)
+	if err != nil {
+		if strings.Contains(err.Error(), "401") {
+			return nil, errors.UserNotExist{0, login}
+		}
+		return nil, err
+	}
+
+	if !autoRegister {
+		return user, nil
+	}
+	user = &User{
+		LowerName:   strings.ToLower(login),
+		Name:        login,
+		FullName:    fullname,
+		Email:       email,
+		Website:     url,
+		Passwd:      password,
+		LoginType:   LOGIN_GITHUB,
+		LoginSource: sourceID,
+		LoginName:   login,
+		IsActive:    true,
+		Location:    location,
+	}
+	return user, CreateUser(user)
+}
+
+func remoteUserLogin(user *User, login, password string, source *LoginSource, autoRegister bool) (*User, error) {
 	if !source.IsActived {
 		return nil, errors.LoginSourceNotActivated{source.ID}
 	}
@@ -509,13 +804,16 @@ func ExternalUserLogin(user *User, login, password string, source *LoginSource,
 		return LoginViaSMTP(user, login, password, source.ID, source.Cfg.(*SMTPConfig), autoRegister)
 	case LOGIN_PAM:
 		return LoginViaPAM(user, login, password, source.ID, source.Cfg.(*PAMConfig), autoRegister)
+	case LOGIN_GITHUB:
+		return LoginViaGitHub(user, login, password, source.ID, source.Cfg.(*GitHubConfig), autoRegister)
 	}
 
 	return nil, errors.InvalidLoginSourceType{source.Type}
 }
 
-// UserSignIn validates user name and password.
-func UserSignIn(username, password string) (*User, error) {
+// UserLogin validates user name and password via given login source ID.
+// If the loginSourceID is negative, it will abort login process if user is not found.
+func UserLogin(username, password string, loginSourceID int64) (*User, error) {
 	var user *User
 	if strings.Contains(username, "@") {
 		user = &User{Email: strings.ToLower(username)}
@@ -525,44 +823,44 @@ func UserSignIn(username, password string) (*User, error) {
 
 	hasUser, err := x.Get(user)
 	if err != nil {
-		return nil, err
+		return nil, fmt.Errorf("get user record: %v", err)
 	}
 
 	if hasUser {
-		switch user.LoginType {
-		case LOGIN_NOTYPE, LOGIN_PLAIN:
+		// Note: This check is unnecessary but to reduce user confusion at login page
+		// and make it more consistent at user's perspective.
+		if loginSourceID >= 0 && user.LoginSource != loginSourceID {
+			return nil, errors.LoginSourceMismatch{loginSourceID, user.LoginSource}
+		}
+
+		// Validate password hash fetched from database for local accounts
+		if user.LoginType == LOGIN_NOTYPE ||
+			user.LoginType == LOGIN_PLAIN {
 			if user.ValidatePassword(password) {
 				return user, nil
 			}
 
 			return nil, errors.UserNotExist{user.ID, user.Name}
-
-		default:
-			var source LoginSource
-			hasSource, err := x.Id(user.LoginSource).Get(&source)
-			if err != nil {
-				return nil, err
-			} else if !hasSource {
-				return nil, ErrLoginSourceNotExist{user.LoginSource}
-			}
-
-			return ExternalUserLogin(user, user.LoginName, password, &source, false)
 		}
+
+		// Remote login to the login source the user is associated with
+		source, err := GetLoginSourceByID(user.LoginSource)
+		if err != nil {
+			return nil, err
+		}
+
+		return remoteUserLogin(user, user.LoginName, password, source, false)
 	}
 
-	sources := make([]*LoginSource, 0, 3)
-	if err = x.UseBool().Find(&sources, &LoginSource{IsActived: true}); err != nil {
+	// Non-local login source is always greater than 0
+	if loginSourceID <= 0 {
+		return nil, errors.UserNotExist{-1, username}
+	}
+
+	source, err := GetLoginSourceByID(loginSourceID)
+	if err != nil {
 		return nil, err
 	}
 
-	for _, source := range sources {
-		authUser, err := ExternalUserLogin(nil, username, password, source, true)
-		if err == nil {
-			return authUser, nil
-		}
-
-		log.Warn("Failed to login '%s' via '%s': %v", username, source.Name, err)
-	}
-
-	return nil, errors.UserNotExist{user.ID, user.Name}
+	return remoteUserLogin(nil, username, password, source, true)
 }

models/migrations/migrations.go

@@ -13,7 +13,7 @@ import (
 	"github.com/go-xorm/xorm"
 	log "gopkg.in/clog.v1"
 
-	"github.com/gogits/gogs/pkg/tool"
+	"github.com/gogs/gogs/pkg/tool"
 )
 
 const _MIN_DB_VER = 10
@@ -64,6 +64,10 @@ var migrations = []Migration{
 	NewMigration("update repository sizes", updateRepositorySizes),
 	// v16 -> v17:v0.10.31
 	NewMigration("remove invalid protect branch whitelist", removeInvalidProtectBranchWhitelist),
+	// v17 -> v18:v0.11.48
+	NewMigration("store long text in repository description field", updateRepositoryDescriptionField),
+	// v18 -> v19:v0.11.55
+	NewMigration("clean unlinked webhook and hook_tasks", cleanUnlinkedWebhookAndHookTasks),
 }
 
 // Migrate database to current version
@@ -98,9 +102,9 @@ You can migrate your older database using a previous release, then you can upgra
 Please save following instructions to somewhere and start working:
 
 - If you were using below 0.6.0 (e.g. 0.5.x), download last supported archive from following link:
-	https://github.com/gogits/gogs/releases/tag/v0.7.33
+	https://github.com/gogs/gogs/releases/tag/v0.7.33
 - If you were using below 0.7.0 (e.g. 0.6.x), download last supported archive from following link:
-	https://github.com/gogits/gogs/releases/tag/v0.9.141
+	https://github.com/gogs/gogs/releases/tag/v0.9.141
 
 Once finished downloading,
 
@@ -133,13 +137,6 @@ In case you're stilling getting this notice, go through instructions again until
 	return nil
 }
 
-func sessionRelease(sess *xorm.Session) {
-	if !sess.IsCommitedOrRollbacked {
-		sess.Rollback()
-	}
-	sess.Close()
-}
-
 func generateOrgRandsAndSalt(x *xorm.Engine) (err error) {
 	type User struct {
 		ID    int64  `xorm:"pk autoincr"`
@@ -153,7 +150,7 @@ func generateOrgRandsAndSalt(x *xorm.Engine) (err error) {
 	}
 
 	sess := x.NewSession()
-	defer sessionRelease(sess)
+	defer sess.Close()
 	if err = sess.Begin(); err != nil {
 		return err
 	}
@@ -165,7 +162,7 @@ func generateOrgRandsAndSalt(x *xorm.Engine) (err error) {
 		if org.Salt, err = tool.RandomString(10); err != nil {
 			return err
 		}
-		if _, err = sess.Id(org.ID).Update(org); err != nil {
+		if _, err = sess.ID(org.ID).Update(org); err != nil {
 			return err
 		}
 	}