remove old files

.gitmodules

@@ -1,5 +0,0 @@
-[submodule "klipper"]
-	path = klipper
-	url = https://github.com/KevinOConnor/klipper
-	ignore = dirty
-

install-sparkcube.sh

@@ -1,98 +0,0 @@
-#!/bin/bash
-# This script installs Klipper on a Raspberry Pi machine running the
-# OctoPi distribution.
-
-repo="/opt/klipper-sparkcube"
-klipper_user="octoprint"
-
-PYTHONDIR="${repo}/klippy-env"
-
-# Step 1: Install system packages
-install_packages()
-{
-    # Packages for python cffi
-    PKGLIST="python-virtualenv virtualenv python-dev libffi-dev build-essential"
-    # kconfig requirements
-    PKGLIST="${PKGLIST} libncurses-dev"
-    # hub-ctrl
-    #PKGLIST="${PKGLIST} libusb-dev"
-    # AVR chip installation and building
-    #PKGLIST="${PKGLIST} avrdude gcc-avr binutils-avr avr-libc"
-    # ARM chip installation and building
-    #PKGLIST="${PKGLIST} stm32flash libnewlib-arm-none-eabi"
-    PKGLIST="${PKGLIST} libnewlib-arm-none-eabi"
-    PKGLIST="${PKGLIST} gcc-arm-none-eabi binutils-arm-none-eabi"
-
-    # Update system package info
-    report_status "Running apt-get update..."
-    apt-get update
-
-    # Install desired packages
-    report_status "Installing packages..."
-    apt-get install --yes ${PKGLIST}
-}
-
-# Step 2: Create python virtual environment
-create_virtualenv()
-{
-    report_status "Updating python virtual environment..."
-
-    # Create virtualenv if it doesn't already exist
-    [ ! -d ${PYTHONDIR} ] && virtualenv ${PYTHONDIR}
-
-    # Install/update dependencies
-    ${PYTHONDIR}/bin/pip install cffi==1.6.0 pyserial==3.2.1 greenlet==0.4.10
-}
-
-# Step 3: Install startup script config
-install_systemd_unit()
-{
-    unitfile=/etc/systemd/system/klipper.service
-    [ -f ${unitfile} ] && return
-
-    report_status "Installing system start configuration..."
-    cat > ${unitfile} <<EOF
-[Unit]
-Description=Klipper
-After=network-online.target
-
-[Install]
-WantedBy=multi-user.target
-
-[Service]
-Type=simple
-RemainAfterExit=yes
-User=${klipper_user}
-ExecStart=${PYTHONDIR}/bin/python ${repo}/klipper/klippy/klippy.py ${repo}/sparkcube.cfg -l /var/log/klippy.log
-
-EOF
-
-    systemctl daemon-reload
-    systemctl enable klipper.service
-    systemctl start klipper.service
-}
-
-# Step 4: Start host software
-start_software()
-{
-    report_status "Launching Klipper host software..."
-    systemctl start klipper
-}
-
-# Helper functions
-report_status()
-{
-    echo -e "\n\n###### $1"
-}
-
-# Force script to exit if an error occurs
-set -e
-
-# Find SRCDIR from the pathname of this script
-SRCDIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )"/.. && pwd )"
-
-# Run installation steps defined above
-install_packages
-create_virtualenv
-install_systemd_unit
-#start_software