diff --git a/conf/locale/locale_bg-BG.ini b/conf/locale/locale_bg-BG.ini index c024d2c24..cb4c8f8e3 100644 --- a/conf/locale/locale_bg-BG.ini +++ b/conf/locale/locale_bg-BG.ini @@ -51,13 +51,14 @@ internal_server_error=Internal Server Error install=Инсталация title=Стъпки за инсталиране при първоначално стартиране docker_helper=Ако Gogs е стартиран в Docker контейнер, моля прочетете нашите указания внимателно, преди да правите промени по настройките на тази страница! -requite_db_desc=Gogs изисква MySQL, PostgreSQL, SQLite3 или TiDB. +requite_db_desc=Gogs requires MySQL, PostgreSQL, SQLite3 or TiDB (via MySQL protocol). db_title=Настройки на базата данни db_type=Тип на база данни host=Сървър user=Потребител password=Парола db_name=Име на база данни +db_schema=Schema db_helper=Моля, използвайте INNODB engine с utf8_general_ci кодиране на знаци за MySQL. ssl_mode=Режим SSL path=Път @@ -399,7 +400,9 @@ owner=Притежател repo_name=Име на хранилището repo_name_helper=Добро име на хранилище е име, състоящо от кратки, запомнящи се и уникални ключови думи. visibility=Видимост +unlisted=Unlisted visiblity_helper=Това хранилище е Частно +unlisted_helper=This repository is Unlisted visiblity_helper_forced=Административна настройка задължава всички нови хранилища да бъдат Частни visiblity_fork_helper=(Промяна на тази стойност ще се отрази на всички разклонения) clone_helper=Нуждаете се от помощ при клониране? Посетете Помощ! @@ -440,6 +443,7 @@ migrate.clone_address_desc=Може да използвате HTTP/HTTPS/GIT а migrate.clone_address_desc_import_local=Можете да мигрирате хранилище от локален път на сървъра. migrate.permission_denied=Недостатъчни права за импорт на локални хранилища. migrate.invalid_local_path=Невалиден път - не съществува или не е директория. +migrate.clone_address_resolved_to_blocked_local_address=Clone address resolved to a local network address that is implicitly blocked. migrate.failed=Грешка при миграция: %v mirror_from=огледало от @@ -806,7 +810,7 @@ settings.webhook.headers=Заглавки settings.webhook.payload=Съдържание settings.webhook.body=Тяло settings.webhook.err_cannot_parse_payload_url=Cannot parse payload URL: %v -settings.webhook.err_cannot_use_local_addresses=Non admins are not allowed to use local addresses. +settings.webhook.url_resolved_to_blocked_local_address=Payload URL resolved to a local network address that is implicitly blocked. settings.githooks_desc=Git куките се изпълняват от Git. Вие може да промените файловете с поддържаните куки в списъка по-долу, за да изпълните външни операции. settings.githook_edit_desc=Ако куката е неактивна, ще бъде представено примерно съдържание. Ако оставите съдържанието празно, то тази кука ще бъде изключена. settings.githook_name=Име на куката @@ -1202,6 +1206,7 @@ config.ssh.start_builtin_server=Start builtin server config.ssh.listen_host=Listen host config.ssh.listen_port=Listen port config.ssh.server_ciphers=Server ciphers +config.ssh.server_macs=Server MACs config.repo_config=Конфигурация на хранилище config.repo.root_path=Root path @@ -1226,6 +1231,8 @@ config.db_config=Настройки на базата данни config.db.type=Type config.db.host=Host config.db.name=Name +config.db.schema=Schema +config.db.schema_helper=(for "postgres" only) config.db.user=User config.db.ssl_mode=SSL mode config.db.ssl_mode_helper=(for "postgres" only) @@ -1242,6 +1249,7 @@ config.security.cookie_secure=Enable secure cookie config.security.reverse_proxy_auth_user=Reverse proxy authentication header config.security.enable_login_status_cookie=Enable login status cookie config.security.login_status_cookie_name=Login status cookie +config.security.local_network_allowlist=Local network allowlist config.email_config=Email configuration config.email.enabled=Enabled diff --git a/conf/locale/locale_cs-CZ.ini b/conf/locale/locale_cs-CZ.ini index e2cd5420e..466c59f62 100644 --- a/conf/locale/locale_cs-CZ.ini +++ b/conf/locale/locale_cs-CZ.ini @@ -51,13 +51,14 @@ internal_server_error=Internal Server Error install=Instalace title=Kroky instalace pro první spuštění docker_helper=Spouštíte-li Gogs uvnitř Dockeru, přečtěte si prosím pečlivě návod, než něco změníte na této stránce! -requite_db_desc=Gogs vyžaduje MySQL, PostgreSQL, SQLite3, MSSQL nebo TiDB. +requite_db_desc=Gogs requires MySQL, PostgreSQL, SQLite3 or TiDB (via MySQL protocol). db_title=Nastavení databáze db_type=Typ databáze host=Server user=Uživatel password=Heslo db_name=Název databáze +db_schema=Schema db_helper=Prosím, pro MySQL použijte INNODB engine se znakovou sadou utf8_general_ci. ssl_mode=SSL režim path=Cesta @@ -399,7 +400,9 @@ owner=Vlastník repo_name=Název repositáře repo_name_helper=Dobrý název repositáře se většinou skládá z krátkých, zapamatovatelných a unikátních klíčových slov. visibility=Viditelnost +unlisted=Unlisted visiblity_helper=Tento repositář je soukromý +unlisted_helper=This repository is Unlisted visiblity_helper_forced=Správce vynutil na všech nových repositářích, aby byly soukromé visiblity_fork_helper=(Změna této hodnoty ovlivní všechny repositáře rozštěpení) clone_helper=Potřebujete pomoci s klonováním? Navštivte nápovědu! @@ -440,6 +443,7 @@ migrate.clone_address_desc=Toto může být HTTP/HTTPS/GIT URL. migrate.clone_address_desc_import_local=Máte povoleno přenést repositář pomocí lokální cesty na serveru. migrate.permission_denied=Není vám dovoleno importovat místní repositáře. migrate.invalid_local_path=Neplatná místní cesta, buď neexistuje nebo není adresářem. +migrate.clone_address_resolved_to_blocked_local_address=Clone address resolved to a local network address that is implicitly blocked. migrate.failed=Přenesení selhalo: %v mirror_from=zrcadlo @@ -806,7 +810,7 @@ settings.webhook.headers=Hlavičky settings.webhook.payload=Datová část settings.webhook.body=Tělo zprávy settings.webhook.err_cannot_parse_payload_url=Cannot parse payload URL: %v -settings.webhook.err_cannot_use_local_addresses=Non admins are not allowed to use local addresses. +settings.webhook.url_resolved_to_blocked_local_address=Payload URL resolved to a local network address that is implicitly blocked. settings.githooks_desc=Jelikož háčky Gitu jsou spravovány Gitem samotným, můžete v seznamu níže upravit soubory podporovaných háčku k provádění uživatelských operací. settings.githook_edit_desc=Je-li háček neaktivní, bude zobrazen vzorový obsah. Nebude-li zadán žádný obsah, háček bude vypnut. settings.githook_name=Název háčku @@ -1202,6 +1206,7 @@ config.ssh.start_builtin_server=Start builtin server config.ssh.listen_host=Listen host config.ssh.listen_port=Listen port config.ssh.server_ciphers=Serverové šifry +config.ssh.server_macs=Server MACs config.repo_config=Nastavení repositáře config.repo.root_path=Kořenová cesta @@ -1226,6 +1231,8 @@ config.db_config=Nastavení databáze config.db.type=Type config.db.host=Host config.db.name=Name +config.db.schema=Schema +config.db.schema_helper=(for "postgres" only) config.db.user=User config.db.ssl_mode=SSL mode config.db.ssl_mode_helper=(for "postgres" only) @@ -1242,6 +1249,7 @@ config.security.cookie_secure=Enable secure cookie config.security.reverse_proxy_auth_user=Reverse proxy authentication header config.security.enable_login_status_cookie=Enable login status cookie config.security.login_status_cookie_name=Login status cookie +config.security.local_network_allowlist=Local network allowlist config.email_config=Email configuration config.email.enabled=Enabled diff --git a/conf/locale/locale_de-DE.ini b/conf/locale/locale_de-DE.ini index bb1730056..72fe7f648 100644 --- a/conf/locale/locale_de-DE.ini +++ b/conf/locale/locale_de-DE.ini @@ -44,20 +44,21 @@ issues=Issues cancel=Abbrechen [status] -page_not_found=Page Not Found -internal_server_error=Internal Server Error +page_not_found=Seite nicht gefunden +internal_server_error=Interner Serverfehler [install] install=Installation title=Installationsschritte für den ersten Start docker_helper=Wenn Gogs innerhalb von Docker läuft, lesen Sie sich bitte den Leitfaden genau durch, bevor Sie irgendwas auf dieser Seite ändern! -requite_db_desc=Gogs benötigt MySQL, PostgreSQL, SQLite3, MSSQL oder TiDB. +requite_db_desc=Gogs requires MySQL, PostgreSQL, SQLite3 or TiDB (via MySQL protocol). db_title=Datenbankeinstellungen db_type=Datenbanktyp host=Host user=Benutzer password=Passwort db_name=Datenbankname +db_schema=Schema db_helper=Bitte verwenden Sie in MySQL die InnoDB-Engine mit dem Zeichensatz utf8_general_ci. ssl_mode=SSL-Modus path=Pfad @@ -263,7 +264,7 @@ following=Folge ich follow=Folgen unfollow=Nicht mehr folgen -form.name_not_allowed=User name or pattern %q is not allowed. +form.name_not_allowed=Benutzername oder Muster %q ist nicht erlaubt. [settings] profile=Profil @@ -399,7 +400,9 @@ owner=Besitzer repo_name=Repository-Name repo_name_helper=Ein guter Repository-Name besteht gewöhnlich aus kurzen, leicht zu merkenden und eindeutigen Schlüsselworten. visibility=Sichtbarkeit +unlisted=Unlisted visiblity_helper=Dieses Repository ist privat +unlisted_helper=This repository is Unlisted visiblity_helper_forced=Der Administrator hat festgelegt, dass alle neuen Repositories privat sein müssen visiblity_fork_helper=(Eine Änderung dieses Wertes wirkt sich auf alle Forks aus) clone_helper=Brauchen Sie Hilfe beim Klonen? Hier gibt es Hilfe! @@ -440,6 +443,7 @@ migrate.clone_address_desc=Dies kann eine HTTP/HTTPS/GIT-URL sein. migrate.clone_address_desc_import_local=Sie dürfen auch ein Repository vom lokalen Serverpfad migrieren. migrate.permission_denied=Ihnen fehlen die Rechte zum Importieren lokaler Repositories. migrate.invalid_local_path=Der lokale Pfad ist ungültig, existiert nicht oder ist kein Ordner. +migrate.clone_address_resolved_to_blocked_local_address=Clone address resolved to a local network address that is implicitly blocked. migrate.failed=Fehler bei Migration: %v mirror_from=Mirror von @@ -789,8 +793,8 @@ settings.remove_collaborator_success=Mitarbeiter wurde entfernt. settings.search_user_placeholder=Benutzer suchen... settings.org_not_allowed_to_be_collaborator=Eine Organisation kann nicht als Mitarbeiter hinzugefügt werden. settings.hooks_desc=Webhooks erlauben es Ihnen, externe Dienste zu informieren, wenn etwas Bestimmtes in Ihrem Repository passiert. Gogs sendet dann einen POST-Request an alle angegebenen URLs. Erfahren Sie mehr in unserem Webhooks Guide. -settings.webhooks.add_new=Add a new webhook: -settings.webhooks.choose_a_type=Choose a type... +settings.webhooks.add_new=Einen neuen Webhook hinzufügen: +settings.webhooks.choose_a_type=Typ auswählen... settings.add_webhook=Webhook hinzufügen settings.webhook_deletion=Webhook entfernen settings.webhook_deletion_desc=Das Löschen dieses Webhooks wird alle zugehörigen Informationen und den Übertragungsverlauf entfernen. Wirklich fortfahren? @@ -805,8 +809,8 @@ settings.webhook.response=Antwort settings.webhook.headers=Kopfzeilen settings.webhook.payload=Nutzdaten settings.webhook.body=Inhalt -settings.webhook.err_cannot_parse_payload_url=Cannot parse payload URL: %v -settings.webhook.err_cannot_use_local_addresses=Non admins are not allowed to use local addresses. +settings.webhook.err_cannot_parse_payload_url=Payload URL kann nicht analysiert werden: %v +settings.webhook.url_resolved_to_blocked_local_address=Payload URL resolved to a local network address that is implicitly blocked. settings.githooks_desc=Git-Hooks werden von Git selbst bereitgestellt. Sie können die Dateien der unterstützten Hooks in der Liste unten bearbeiten, um eigene Operationen einzubinden. settings.githook_edit_desc=Wenn ein Hook inaktiv ist, wird der Standardinhalt benutzt. Lassen Sie den Inhalt leer, um den Hook zu deaktivieren. settings.githook_name=Hook-Name @@ -934,7 +938,7 @@ team_desc_helper=Worum geht es bei diesem Team? team_permission_desc=Welche Berechtigungsstufe soll das Team haben? form.name_not_allowed=Organization name or pattern %q is not allowed. -form.team_name_not_allowed=Team name or pattern %q is not allowed. +form.team_name_not_allowed=Benutzername oder Muster %q ist nicht erlaubt. settings=Einstellungen settings.options=Optionen @@ -1202,6 +1206,7 @@ config.ssh.start_builtin_server=Eingebauten Server starten config.ssh.listen_host=Listen-Host config.ssh.listen_port=Listen-Port config.ssh.server_ciphers=Serverchiffren +config.ssh.server_macs=Server MACs config.repo_config=Repository-Konfiguration config.repo.root_path=Wurzelpfad @@ -1226,6 +1231,8 @@ config.db_config=Datenbankkonfiguration config.db.type=Typ config.db.host=Host config.db.name=Name +config.db.schema=Schema +config.db.schema_helper=(for "postgres" only) config.db.user=Benutzer config.db.ssl_mode=SSL-Modus config.db.ssl_mode_helper=(nur für "postgres") @@ -1242,6 +1249,7 @@ config.security.cookie_secure=Sicheres Cookie aktivieren config.security.reverse_proxy_auth_user=Reverse-Proxy-Authentifizierungs-Header config.security.enable_login_status_cookie=Login-Status-Cookie aktivieren config.security.login_status_cookie_name=Login-Status-Cookie +config.security.local_network_allowlist=Local network allowlist config.email_config=E-Mail-Konfiguration config.email.enabled=Aktiviert @@ -1332,9 +1340,9 @@ config.git.clone_timeout=Clone-Timeout config.git.pull_timeout=Pull-Timeout config.git.gc_timeout=GC-Timeout -config.lfs_config=LFS configuration -config.lfs.storage=Storage -config.lfs.objects_path=Objects path +config.lfs_config=LFS-Konfiguration +config.lfs.storage=Speicher +config.lfs.objects_path=Objektpfad config.log_config=Konfiguration des Loggings config.log_file_root_path=Log-Verzeichnis diff --git a/conf/locale/locale_en-GB.ini b/conf/locale/locale_en-GB.ini index 3010b49e5..ba7062c85 100644 --- a/conf/locale/locale_en-GB.ini +++ b/conf/locale/locale_en-GB.ini @@ -51,13 +51,14 @@ internal_server_error=Internal Server Error install=Installation title=Install Steps For First-time Run docker_helper=If you're running Gogs inside Docker, please read Guidelines carefully before you change anything in this page! -requite_db_desc=Gogs requires MySQL, PostgreSQL, SQLite3 or TiDB. +requite_db_desc=Gogs requires MySQL, PostgreSQL, SQLite3 or TiDB (via MySQL protocol). db_title=Database Settings db_type=Database Type host=Host user=User password=Password db_name=Database Name +db_schema=Schema db_helper=Please use INNODB engine with utf8_general_ci charset for MySQL. ssl_mode=SSL Mode path=Path @@ -236,6 +237,7 @@ team_name_been_taken=Team name has already been taken. email_been_used=Email address has already been used. username_password_incorrect=Username or password is not correct. auth_source_mismatch=The authentication source selected is not associated with the user. + enterred_invalid_repo_name=Please make sure that the repository name you have entered is correct. enterred_invalid_owner_name=Please make sure that the owner name you have entered is correct. enterred_invalid_password=Please make sure the that password you have entered is correct. @@ -263,7 +265,8 @@ following=Following follow=Follow unfollow=Unfollow -form.name_not_allowed=User name or pattern %q is not allowed. +form.name_not_allowed=Username or pattern %q is not allowed. + [settings] profile=Profile @@ -355,6 +358,7 @@ two_factor_then_enter_passcode=Then enter passcode: two_factor_verify=Verify two_factor_invalid_passcode=The passcode you entered is not valid, please try again! two_factor_reused_passcode=The passcode you entered has already been used, please try another one! + two_factor_enable_error=Enable Two-factor authentication failed: %v two_factor_enable_success=Two-factor authentication has enabled for your account successfully! two_factor_recovery_codes_title=Two-factor Authentication Recovery Codes @@ -379,6 +383,7 @@ access_token_deletion_desc=Delete this personal access token will remove all rel delete_token_success=Personal access token has been removed successfully! Don't forget to update your application as well. token_name_exists=Token with same name already exists. + orgs.none=You are not a member of any organisations. orgs.leave_title=Leave organisation orgs.leave_desc=You will lose access to all repositories and teams after you left the organization. Do you want to continue? @@ -399,7 +404,9 @@ owner=Owner repo_name=Repository Name repo_name_helper=A good repository name is usually composed of short, memorable and unique keywords. visibility=Visibility +unlisted=Unlisted visiblity_helper=This repository is Private +unlisted_helper=This repository is Unlisted visiblity_helper_forced=Site admin has forced all new repositories to be Private visiblity_fork_helper=(Change of this value will affect all forks) clone_helper=Need help cloning? Visit Help! @@ -426,11 +433,14 @@ watchers=Watchers stargazers=Stargazers forks=Forks repo_description_helper=Description of repository. Maximum 512 characters length. + repo_description_length=Available characters + form.reach_limit_of_creation=The owner has reached maximum creation limit of %d repositories. form.name_not_allowed=Repository name or pattern %q is not allowed. + need_auth=Need Authorisation migrate_type=Migration Type migrate_type_helper=This repository will be a mirror @@ -440,6 +450,7 @@ migrate.clone_address_desc=This can be a HTTP/HTTPS/GIT URL. migrate.clone_address_desc_import_local=You're also allowed to migrate a repository by local server path. migrate.permission_denied=You are not allowed to import local repositories. migrate.invalid_local_path=Invalid local path, it does not exist or not a directory. +migrate.clone_address_resolved_to_blocked_local_address=Clone address resolved to a local network address that is implicitly blocked. migrate.failed=Migration failed: %v mirror_from=mirror of @@ -524,6 +535,7 @@ editor.file_already_exists=A file with name '%s' already exists in this reposito editor.no_changes_to_show=There are no changes to show. editor.fail_to_update_file=Failed to update/create file '%s' with error: %v editor.fail_to_delete_file=Failed to delete file '%s' with error: %v + editor.add_subdir=Add subdirectory... editor.unable_to_upload_files=Failed to upload files to '%s' with error: %v editor.upload_files_to_dir=Upload files to '%s' @@ -643,6 +655,7 @@ pulls.can_auto_merge_desc=This pull request can be merged automatically. pulls.cannot_auto_merge_desc=This pull request can't be merged automatically because there are conflicts. pulls.cannot_auto_merge_helper=Please merge manually in order to resolve the conflicts. pulls.create_merge_commit=Create a merge commit + pulls.rebase_before_merging=Rebase before merging pulls.commit_description=Commit Description pulls.merge_pull_request=Merge Pull Request @@ -750,8 +763,11 @@ settings.tracker_issue_style.numeric=Numeric settings.tracker_issue_style.alphanumeric=Alphanumeric settings.tracker_url_format_desc=You can use placeholder {user} {repo} {index} for user name, repository name and issue index. settings.pulls_desc=Enable pull requests to accept contributions between repositories and branches + settings.pulls.ignore_whitespace=Ignore changes in whitespace + settings.pulls.allow_rebase_merge=Allow use rebase to merge commits + settings.danger_zone=Danger Zone settings.cannot_fork_to_same_owner=You cannot fork a repository to its original owner. settings.new_owner_has_same_repo=The new owner already has a repository with same name. Please choose another name. @@ -773,6 +789,7 @@ settings.delete=Delete This Repository settings.delete_desc=Once you delete a repository, there is no going back. Please be certain. settings.delete_notices_1=- This operation CANNOT be undone. settings.delete_notices_2=- This operation will permanently delete everything in this repository, including Git data, issues, comments and collaborator access. + settings.delete_notices_fork_1=- All forks will become independent after deletion. settings.deletion_success=Repository has been deleted successfully! settings.update_settings_success=Repository options has been updated successfully. @@ -790,7 +807,9 @@ settings.search_user_placeholder=Search user... settings.org_not_allowed_to_be_collaborator=Organisation is not allowed to be added as a collaborator. settings.hooks_desc=Webhooks are much like basic HTTP POST event triggers. Whenever something occurs in Gogs, we will handle the notification to the target host you specify. Learn more in this Webhooks Guide. settings.webhooks.add_new=Add a new webhook: + settings.webhooks.choose_a_type=Choose a type... + settings.add_webhook=Add Webhook settings.webhook_deletion=Delete Webhook settings.webhook_deletion_desc=Delete this webhook will remove its information and all delivery history. Do you want to continue? @@ -805,8 +824,9 @@ settings.webhook.response=Response settings.webhook.headers=Headers settings.webhook.payload=Payload settings.webhook.body=Body -settings.webhook.err_cannot_parse_payload_url=Cannot parse payload URL: %v -settings.webhook.err_cannot_use_local_addresses=Non admins are not allowed to use local addresses. +settings.webhook.err_cannot_parse_payload_url=Cannot parse the payload URL: %v + +settings.webhook.url_resolved_to_blocked_local_address=Payload URL resolved to a local network address that is implicitly blocked. settings.githooks_desc=Git Hooks are powered by Git itself, you can edit files of supported hooks in the list below to perform custom operations. settings.githook_edit_desc=If the hook is inactive, sample content will be presented. Leaving content to an empty value will disable this hook. settings.githook_name=Hook Name @@ -868,8 +888,10 @@ settings.deploy_key_deletion=Delete Deploy Key settings.deploy_key_deletion_desc=Deleting this deploy key will remove all related accesses for this repository. Do you want to continue? settings.deploy_key_deletion_success=Deploy key has been deleted successfully! settings.description_desc=Description of repository. Maximum 512 characters length. + settings.description_length=Available characters + diff.browse_source=Browse Source diff.parent=parent diff.commit=commit @@ -934,8 +956,10 @@ team_desc_helper=What is this team all about? team_permission_desc=What permission level should this team have? form.name_not_allowed=Organization name or pattern %q is not allowed. + form.team_name_not_allowed=Team name or pattern %q is not allowed. + settings=Settings settings.options=Options settings.full_name=Full Name @@ -1007,18 +1031,25 @@ last_page=Last total=Total: %d dashboard.build_info=Build Information + dashboard.app_ver=Application version + dashboard.git_version=Git version + dashboard.go_version=Go version + dashboard.build_time=Build time + dashboard.build_commit=Build commit + dashboard.statistic=Statistics dashboard.operations=Operations dashboard.system_status=System Monitor Status dashboard.statistic_info=Gogs database has %d users, %d organisations, %d public keys, %d repositories, %d watches, %d stars, %d actions, %d accesses, %d issues, %d comments, %d social accounts, %d follows, %d mirrors, %d releases, %d login sources, %d webhooks, %d milestones, %d labels, %d hook tasks, %d teams, %d update tasks, %d attachments. dashboard.operation_name=Operation Name dashboard.operation_switch=Switch -dashboard.select_operation_to_run=Please select operation to run +dashboard.select_operation_to_run=Please select an operation to run + dashboard.operation_run=Run dashboard.clean_unbind_oauth=Clean unbound OAuthes dashboard.clean_unbind_oauth_success=All unbind OAuthes have been deleted successfully. @@ -1125,6 +1156,7 @@ auths.host=Host auths.port=Port auths.bind_dn=Bind DN auths.bind_dn_helper=You can use '%s' as placeholder for username, e.g. DOM\%s + auths.bind_password=Bind Password auths.bind_password_helper=Warning: This password is stored in plain text. Do not use a high privileged account. auths.user_base=User Search Base @@ -1154,7 +1186,8 @@ auths.pam_service_name=PAM Service Name auths.enable_auto_register=Enable Auto Registration auths.edit=Edit Authentication Setting auths.activated=This authentication is activated -auths.default_auth=This authentication is default login source +auths.default_auth=This authentication is the default login page + auths.new_success=New authentication '%s' has been added successfully. auths.update_success=Authentication setting has been updated successfully. auths.update=Update Authentication Setting @@ -1167,27 +1200,44 @@ auths.login_source_exist=Login source '%s' already exists. auths.github_api_endpoint=API Endpoint config.not_set=(not set) + config.server_config=Server Configuration config.brand_name=Brand name + config.run_user=Run User config.run_mode=Run Mode config.server.external_url=External URL + config.server.domain=Domain + config.server.protocol=Protocol config.server.http_addr=HTTP address + config.server.http_port=HTTP port + config.server.cert_file=Certificate file + config.server.key_file=Key file + config.server.tls_min_version=Minimum TLS version + config.server.unix_socket_permission=Unix socket permission + config.server.local_root_url=Local root URL + config.server.offline_mode=Offline mode + config.server.disable_router_log=Disable router log + config.server.enable_gzip=Enable Gzip + config.server.app_data_path=Application data path + config.server.load_assets_from_disk=Load assets from disk + config.server.landing_url=Landing URL + config.ssh_config=SSH Configuration config.ssh.enabled=Enabled config.ssh.domain=Exposed domain @@ -1196,17 +1246,28 @@ config.ssh.root_path=Root path config.ssh.keygen_path=Keygen path config.ssh.key_test_path=Key test path config.ssh.minimum_key_size_check=Minimum key size check + config.ssh.minimum_key_sizes=Minimum key sizes + config.ssh.rewrite_authorized_keys_at_start=Rewrite "authorized_keys" at start + config.ssh.start_builtin_server=Start builtin server + config.ssh.listen_host=Listen host + config.ssh.listen_port=Listen port + config.ssh.server_ciphers=Server ciphers +config.ssh.server_macs=Server MACs + config.repo_config=Repository Configuration config.repo.root_path=Root path + config.repo.script_type=Script type + config.repo.ansi_chatset=ANSI charset + config.repo.force_private=Force private config.repo.max_creation_limit=Max creation limit config.repo.preferred_licenses=Preferred licenses @@ -1226,6 +1287,8 @@ config.db_config=Database Configuration config.db.type=Type config.db.host=Host config.db.name=Name +config.db.schema=Schema +config.db.schema_helper=(for "postgres" only) config.db.user=User config.db.ssl_mode=SSL mode config.db.ssl_mode_helper=(for "postgres" only) @@ -1242,31 +1305,53 @@ config.security.cookie_secure=Enable secure cookie config.security.reverse_proxy_auth_user=Reverse proxy authentication header config.security.enable_login_status_cookie=Enable login status cookie config.security.login_status_cookie_name=Login status cookie +config.security.local_network_allowlist=Local network allowlist config.email_config=Email configuration config.email.enabled=Enabled + config.email.subject_prefix=Subject prefix + config.email.host=Host + config.email.from=From + config.email.user=User config.email.disable_helo=Disable HELO + config.email.helo_hostname=HELO hostname + config.email.skip_verify=Skip certificate verify + config.email.use_certificate=Use custom certificate + config.email.cert_file=Certificate file + config.email.key_file=Key file + config.email.use_plain_text=Use plain text + config.email.add_plain_text_alt=Add plain text alternative + config.email.send_test_mail=Send test email + config.email.test_mail_failed=Failed to send test email to '%s': %v + config.email.test_mail_sent=Test email has been sent to '%s'. + config.auth_config=Authentication configuration + config.auth.activate_code_lives=Activate code lives + config.auth.reset_password_code_lives=Reset password code lives + config.auth.require_email_confirm=Require email confirmation + config.auth.require_sign_in_view=Require sign in view + config.auth.disable_registration=Disable registration + config.auth.enable_registration_captcha=Enable registration captcha config.auth.enable_reverse_proxy_authentication=Enable reverse proxy authentication config.auth.enable_reverse_proxy_auto_registration=Enable reverse proxy auto registration diff --git a/conf/locale/locale_es-ES.ini b/conf/locale/locale_es-ES.ini index 5b13956ca..b1e2ea079 100644 --- a/conf/locale/locale_es-ES.ini +++ b/conf/locale/locale_es-ES.ini @@ -51,13 +51,14 @@ internal_server_error=Internal Server Error install=Instalación title=Pasos de la instalación por primera vez docker_helper=Si está ejecutando Gogs usando Docker, ¡por favor lea estas pautas antes de cambiar nada en esta página! -requite_db_desc=Gogs requiere un SGBD como MySQL, PostgreSQL, SQLite3 o TiDB. +requite_db_desc=Gogs requires MySQL, PostgreSQL, SQLite3 or TiDB (via MySQL protocol). db_title=Configuración de base de datos db_type=Tipo de base de datos host=Host user=Usuario password=Contraseña db_name=Nombre de la base de datos +db_schema=Schema db_helper=Por favor utilice el motor INNODB con la configuración de caracteres utf8_general_ci para MySQL. ssl_mode=Modo SSL path=Ruta @@ -399,7 +400,9 @@ owner=Propietario repo_name=Nombre del repositorio repo_name_helper=Los grandes nombres de repositorios son cortos, memorables y únicos. visibility=Visibilidad +unlisted=Unlisted visiblity_helper=Este repositorio es privado +unlisted_helper=This repository is Unlisted visiblity_helper_forced=El administrador web ha obligado a todos los repositorios nuevos a ser privados visiblity_fork_helper=(Este cambio afectará a todos los forks) clone_helper=¿Necesitas ayuda con el clone? ¡Consulta la Ayuda! @@ -440,6 +443,7 @@ migrate.clone_address_desc=Esto puede ser una dirección URL HTTP/HTTPS/GIT. migrate.clone_address_desc_import_local=También se le permite migrar un repositorio por la ruta del servidor local. migrate.permission_denied=No te está permitido importar repositorios locales. migrate.invalid_local_path=Rutal local inválida, no existe o no es un directorio. +migrate.clone_address_resolved_to_blocked_local_address=Clone address resolved to a local network address that is implicitly blocked. migrate.failed=Migración fallida: %v mirror_from=espejo de @@ -806,7 +810,7 @@ settings.webhook.headers=Encabezado settings.webhook.payload=Payload settings.webhook.body=Cuerpo del mensaje settings.webhook.err_cannot_parse_payload_url=Cannot parse payload URL: %v -settings.webhook.err_cannot_use_local_addresses=Non admins are not allowed to use local addresses. +settings.webhook.url_resolved_to_blocked_local_address=Payload URL resolved to a local network address that is implicitly blocked. settings.githooks_desc=Los Git Hooks son una funcionalidad del propio Git, puedes editar los ficheros de los hooks soportados en la siguiente lista para aplicar operaciones personalizadas. settings.githook_edit_desc=Si el hook no está activo, se mostrará contenido de ejemplo. Dejar el contenido vacío deshabilitará este hook. settings.githook_name=Nombre del Hook @@ -1202,6 +1206,7 @@ config.ssh.start_builtin_server=Start builtin server config.ssh.listen_host=Listen host config.ssh.listen_port=Listen port config.ssh.server_ciphers=Server ciphers +config.ssh.server_macs=Server MACs config.repo_config=Configuración del repositorio config.repo.root_path=Root path @@ -1226,6 +1231,8 @@ config.db_config=Configuración de la Base de Datos config.db.type=Type config.db.host=Host config.db.name=Name +config.db.schema=Schema +config.db.schema_helper=(for "postgres" only) config.db.user=User config.db.ssl_mode=SSL mode config.db.ssl_mode_helper=(for "postgres" only) @@ -1242,6 +1249,7 @@ config.security.cookie_secure=Enable secure cookie config.security.reverse_proxy_auth_user=Reverse proxy authentication header config.security.enable_login_status_cookie=Enable login status cookie config.security.login_status_cookie_name=Login status cookie +config.security.local_network_allowlist=Local network allowlist config.email_config=Email configuration config.email.enabled=Enabled diff --git a/conf/locale/locale_fa-IR.ini b/conf/locale/locale_fa-IR.ini index 1af629367..dd0baa3f6 100644 --- a/conf/locale/locale_fa-IR.ini +++ b/conf/locale/locale_fa-IR.ini @@ -51,13 +51,14 @@ internal_server_error=Internal Server Error install=نصب title=مراحل نصب برای اولین اجرا docker_helper=اگر شما Gogs را با استفاده از Docker اجرا می‌کنید، لطفا قبل از انجام هرگونه تغییر این راهنما را به دقت مطالعه فرمایید! -requite_db_desc=Gogs نیاز به MySQLِ یا PostgreSQL یا SQLite3 یا MSSQL یا TiDB دارد. +requite_db_desc=Gogs requires MySQL, PostgreSQL, SQLite3 or TiDB (via MySQL protocol). db_title=تنظیمات پایگاه داده db_type=نوع پایگاه داده host=میزبان user=کاربر password=رمز عبور db_name=نام پایگاه داده +db_schema=Schema db_helper=در صورت استفاده از MySQL لطفا از موتور INNODB و کد کاراکتری utf8_general_ci استفاده نمایید. ssl_mode=حالت امن (SSL) path=مسیر @@ -401,7 +402,9 @@ owner=صاحب repo_name=نام مخزن repo_name_helper=نام خوب مخزن معمولا از کلمات کلیدی کوتاه و به یاد ماندنی و منحصر به فرد تشکیل شده است. visibility=قابل مشاهده بودن +unlisted=Unlisted visiblity_helper=این مخزن خصوصی است +unlisted_helper=This repository is Unlisted visiblity_helper_forced=مدیر سایت تمام مخازن جدید را ملزم کرده است که خصوصی باشند visiblity_fork_helper=(تغییر این مقدار تمام انشعاب ها را تحت تاثیر می گذارد) clone_helper=برای مشابه سازی نیاز به کمک دارید؟ این راهنمایی را ببینید! @@ -442,6 +445,7 @@ migrate.clone_address_desc=آدرس می تواند از نوع HTTP/HTTPS/GIT migrate.clone_address_desc_import_local=شما همچنین می توانید یک مخزن را با یک آدرس لوکال همگام سازی نمایید. migrate.permission_denied=شما مجاز به بارگزاری مخازن لوکال نیستید. migrate.invalid_local_path=مسیر محلی غیر‌معتبر، این مسیر یا موجود نیست و یا یک دارکتوری نیست. +migrate.clone_address_resolved_to_blocked_local_address=Clone address resolved to a local network address that is implicitly blocked. migrate.failed=انتقال انجام نشد: %v mirror_from=mirrorاز @@ -808,7 +812,7 @@ settings.webhook.headers=هدر settings.webhook.payload=Payload settings.webhook.body=بدنه settings.webhook.err_cannot_parse_payload_url=Cannot parse payload URL: %v -settings.webhook.err_cannot_use_local_addresses=Non admins are not allowed to use local addresses. +settings.webhook.url_resolved_to_blocked_local_address=Payload URL resolved to a local network address that is implicitly blocked. settings.githooks_desc=Git Hook ها توسط تیم Git ایجاد شده اند، شما می توانید فایل hook های پشتیبانی شده را ویرایش کنید تا بتوانید عملیات دلخواه خودتان را انجام دهید. settings.githook_edit_desc=در صورتیکه hook غیرفعال باشد، محتوای نمونه ای موجود در آن ارائه خواهد شد. برای اینکه به کلی غیر فعال شود، محتوا را پاک کنید تا خالی شود. settings.githook_name=نام hook @@ -1204,6 +1208,7 @@ config.ssh.start_builtin_server=Start builtin server config.ssh.listen_host=Listen host config.ssh.listen_port=Listen port config.ssh.server_ciphers=Server ciphers +config.ssh.server_macs=Server MACs config.repo_config=پیکربندی مخزن config.repo.root_path=Root path @@ -1228,6 +1233,8 @@ config.db_config=تنظیمات پایگاه داده config.db.type=Type config.db.host=Host config.db.name=Name +config.db.schema=Schema +config.db.schema_helper=(for "postgres" only) config.db.user=User config.db.ssl_mode=SSL mode config.db.ssl_mode_helper=(for "postgres" only) @@ -1244,6 +1251,7 @@ config.security.cookie_secure=Enable secure cookie config.security.reverse_proxy_auth_user=Reverse proxy authentication header config.security.enable_login_status_cookie=Enable login status cookie config.security.login_status_cookie_name=Login status cookie +config.security.local_network_allowlist=Local network allowlist config.email_config=Email configuration config.email.enabled=Enabled diff --git a/conf/locale/locale_fi-FI.ini b/conf/locale/locale_fi-FI.ini index fedb72ad1..87c5754d4 100644 --- a/conf/locale/locale_fi-FI.ini +++ b/conf/locale/locale_fi-FI.ini @@ -44,45 +44,46 @@ issues=Ongelmat cancel=Peruuta [status] -page_not_found=Page Not Found -internal_server_error=Internal Server Error +page_not_found=Sivua ei löydy +internal_server_error=Sisäinen palvelinvirhe [install] install=Asennus title=Asennusvaiheet ottaessa ensi kertaa käyttöön docker_helper=Jos käytät Gogsia Dockerin sisällä, ole hyvä ja lue ohjeet huolellisesti ennen kuin muutat mitään tältä sivulta! -requite_db_desc=Gogs tarvitsee jonkin seuraavista: MySQL, PostgreSQL, SQLite3, MSSQL tai TiDB. -db_title=Tietokanta asetukset -db_type=Tietokanta tyyppi +requite_db_desc=Gogs requires MySQL, PostgreSQL, SQLite3 or TiDB (via MySQL protocol). +db_title=Tietokannan asetukset +db_type=Tietokannan tyyppi host=Isäntä user=Käyttäjä password=Salasana db_name=Tietokannan nimi +db_schema=Schema db_helper=Ole hyvä ja käytä INNODB moottoria ja utf8_general_ci merkistöä MySQLssä. -ssl_mode=SSL tila +ssl_mode=SSL-tila path=Polku -sqlite_helper=Tiedostopolku SQLite3 tietokantaan.
Käytä absoluuttista polkua ajaessasi palveluna. -err_empty_db_path=SQLite3 tietokantapolku ei voi olla tyhjä. -no_admin_and_disable_registration=Et voi poistaa käytöstä rekisteröintiä luomatta ylläpito tiliä. +sqlite_helper=Tiedostopolku SQLite3-tietokantaan.
Käytä absoluuttista polkua ajaessasi palveluna. +err_empty_db_path=SQLite3-tietokantapolku ei voi olla tyhjä. +no_admin_and_disable_registration=Et voi poistaa käytöstä rekisteröintiä luomatta ylläpitotiliä. err_empty_admin_password=Ylläpito salasana ei voi olla tyhjä. general_title=Sovellus yleiset asetukset app_name=Sovelluksen nimi app_name_helper=Laita organisaatiosi nimi tähän isolla ja kovaäänisesti! repo_path=Repon juuren polku -repo_path_helper=Kaikki Git etä repot tullaan tallentamaan tähän hakemistoon. +repo_path_helper=Kaikki Git-etärepot tullaan tallentamaan tähän hakemistoon. run_user=Suorita käyttäjänä run_user_helper=Käyttäjällä täytyy olla oikeus repositoryn juuripolkuun. Käyttäjällä täytyy myös olla oikeus suorittaa Gogs. domain=Verkkotunnus -domain_helper=Tämä vaikuttaa SSH klooni URLeihin. +domain_helper=Tämä vaikuttaa SSH-kloonausosoitteisiin. ssh_port=SSH-portti ssh_port_helper=Portti numero jota SSH palvelimesi käyttää, jätä tyhjäksi poistaaksesi käytöstä SSH toiminnon. use_builtin_ssh_server=Käytä sisäänrakennettua SSH-palvelinta use_builtin_ssh_server_popup=Käynnistä sisäänrakennettu SSH-palvelin Git-operaatioille, järjestelmän SSH-palvelusta erottautumiseksi. -http_port=HTTP portti -http_port_helper=Portti numero jota sovellus tulee kuuntelemaan. -app_url=Sovellus URL -app_url_helper=Tämä vaikuttaa HTTP/HTTPS klooni URLeihin ja joihinkin sähköposteihin. +http_port=HTTP-portti +http_port_helper=Porttinumero, jota sovellus tulee kuuntelemaan. +app_url=Sovelluksen osoite +app_url_helper=Tämä vaikuttaa HTTP/HTTPS-klooniosoitteisiin ja joihinkin sähköposteihin. log_root_path=Lokin polku log_root_path_helper=Lokien tallennushakemisto. enable_console_mode=Ota käyttöön konsoli tila @@ -92,41 +93,41 @@ optional_title=Valinnaiset asetukset email_title=Sähköposti palvelu asetukset smtp_host=SMTP isäntä smtp_from=Lähettäjä -smtp_from_helper=Sähköposti lähettäjän osoite, RFC 5322. Se voi olla pelkkä sähköposti osoite, tai "Nimi" muodossa. +smtp_from_helper=Sähköpostin lähettäjän osoite, RFC 5322. Se voi olla pelkkä sähköpostiosoite tai "Nimi" -muodossa. mailer_user=Lähettäjän sähköposti mailer_password=Lähettäjän salasana -register_confirm=Ota käyttöön rekisteröinti varmistus +register_confirm=Ota käyttöön rekisteröintivarmistus mail_notify=Ota käyttöön sähköposti ilmoitukset server_service_title=Palvelin ja muut palvelu asetukset -offline_mode=Ota käyttöön Offline tila -offline_mode_popup=Poista käytöstä CDN myös tuotanto tilassa, kaikki resurssi tiedostot palvellaan paikallisesti. -disable_gravatar=Poista käytöstä Gravatar palvelu +offline_mode=Ota käyttöön yhteydetön tila +offline_mode_popup=Poista käytöstä CDN myös tuotantotilassa, kaikki resurssitiedostot palvellaan paikallisesti. +disable_gravatar=Poista käytöstä Gravatar-palvelu disable_gravatar_popup=Poista käytöstä Gravatar ja mukautetut lähteet, kaikki profiilikuvat on käyttäjien palvelimelle lähettämiä tai oletus. federated_avatar_lookup=Käytä ulkopuolista profiilikuvien hakua federated_avatar_lookup_popup=Ota ulkopuolinen profiilikuvien haku käyttöön käyttääksesi avoimen lähdekoodin libravatar-palvelua. disable_registration=Poista käytöstä itse-rekisteröinti -disable_registration_popup=Poista käyttäjän itse rekisteröinti, vain ylläpito voi luoda tilejä. +disable_registration_popup=Poista käyttäjän itserekisteröinti, vain ylläpito voi luoda tilejä. enable_captcha=Ota käyttöön Captcha enable_captcha_popup=Pakollinen captcha käyttäjän itse rekisteröityessä. require_sign_in_view=Ota käyttöön vaadi sisäänkirjautuminen nähdäksesi sivut -require_sign_in_view_popup=Vain sisään kirjautuneet käyttäjät voivat nähdä sivut, vierailijat tulevat näkemään vain kirjautumis/rekisteröinti sivut. -admin_setting_desc=Sinun ei tarvitse luoda ylläpito tiliä nyt, ensimmäinen käyttäjä ID=1 saa ylläpito oikeudet automaattisesti. -admin_title=Ylläpito tili asetukset +require_sign_in_view_popup=Vain sisäänkirjautuneet käyttäjät voivat nähdä sivut, vierailijat tulevat näkemään vain kirjautumis-/rekisteröintisivut. +admin_setting_desc=Sinun ei tarvitse luoda ylläpitotiliä nyt, ensimmäinen käyttäjä ID=1 saa ylläpito-oikeudet automaattisesti. +admin_title=Ylläpitotilin asetukset admin_name=Käyttäjätunnus admin_password=Salasana confirm_password=Varmista salasana admin_email=Ylläpito sähköposti install_gogs=Asenna Gogs test_git_failed=Epäonnistui testata 'git' komentoa: %v -sqlite3_not_available=Julkaisu versiosi ei tue SQLite3, ole hyvä ja lataa virallinen binääri versio osoitteesta %s, EI gobuild versiota. +sqlite3_not_available=Julkaisuversiosi ei tue SQLite3:a, ole hyvä ja lataa virallinen binääriversio osoitteesta %s, EI gobuild-versiota. invalid_db_setting=Tietokanta asetus ei ole oikea: %v invalid_repo_path=Repo juuri polku on virheellinen: %v run_user_not_match=Suoritus käyttäjä ei ole nykyinen käyttäjä: %s -> %s smtp_host_missing_port=SMTP-isännältä puuttuu portin osoite. invalid_smtp_from=SMTP From kenttä ei ole kelvollinen: %v save_config_failed=Asetuksien tallennus epäonnistui: %v -init_failed=Failed to initialize application: %v -invalid_admin_setting=Ylläpito tili asetus virheellinen: %v +init_failed=Sovelluksen alustus epäonnistui: %v +invalid_admin_setting=Ylläpitotilin asetus on virheellinen: %v install_success=Tervetuloa! Olemme iloisia että valitsit Gogs, pidä hauskaa ja pidä huolta itsestäsi. invalid_log_root_path=Loki juurihakemisto ei kelpaa: %v @@ -136,7 +137,7 @@ password_holder=Salasana switch_dashboard_context=Vaihda kojelaudan kontekstia my_repos=Reponi show_more_repos=Näytä lisää repoja... -collaborative_repos=Yhteistyö repot +collaborative_repos=Yhteistyörepot my_orgs=Organisaationi my_mirrors=Peilini view_home=Näytä %s @@ -151,27 +152,27 @@ search=Hae [auth] create_new_account=Luo uusi tili -register_hepler_msg=On jo tili? Kirjaudu sisään nyt! +register_hepler_msg=Onko sinulla jo tili? Kirjaudu sisään nyt! social_register_hepler_msg=On jo tili? Liitä nyt! -disable_register_prompt=Sori, rekisteröinti on poistettu käytöstä. Ole hyvä ja ota yhteyttä sivuston ylläpitoon. -disable_register_mail=Sori, rekisteröinti sähköpostivarmistukset on poistettu käytöstä. +disable_register_prompt=Valitettavasti rekisteröinti on poistettu käytöstä. Ole hyvä ja ota yhteyttä sivuston ylläpitoon. +disable_register_mail=Valitettavasti sähköpostipalvelut ovat poissa käytöstä. Otathan yhteyttä sivuston ylläpitoon. auth_source=Todennuslähde local=Paikallinen remember_me=Muista minut forgot_password=Unohtuiko salasana forget_password=Unohtuiko salasana? sign_up_now=Tarvitsetko tilin? Rekisteröidy nyt. -confirmation_mail_sent_prompt=Uusi varmistus sähköposti on lähetetty osoitteeseen %s, ole hyvä ja tarkista saapuneet seuraavan %d tunnin sisällä saadaksesi rekisteröintiprosessin valmiiksi. +confirmation_mail_sent_prompt=Uusi varmistussähköposti on lähetetty osoitteeseen %s, ole hyvä ja tarkista saapuneet seuraavan %d tunnin sisällä saadaksesi rekisteröintiprosessin valmiiksi. active_your_account=Aktivoi tilisi prohibit_login=Kirjautuminen kielletty prohibit_login_desc=Käyttäjätilisi kirjautuminen on estetty. Ota yhteys sivuston ylläpitäjään. resent_limit_prompt=Sori, olet jo tilannut aktivointi sähköpostin lähiaikoina. Ole hyvä ja odota 3 minuuttia ja yritä sitten uudelleen. -has_unconfirmed_mail=Hei %s, sinulla on varmistamaton sähköposti osoite (%s). Jos et ole saanut varmistus sähköpostia tai tarvitset uudelleenlähetyksen, ole hyvä ja klikkaa allaolevaa painiketta. -resend_mail=Klikkaa tästä uudelleenlähettääksesi aktivointi sähköpostisi -send_reset_mail=Klikkaa tästä (uudelleen)lähettääksesi salasanan nollaus sähköpostin +has_unconfirmed_mail=Hei %s, sinulla on varmistamaton sähköpostiosoite (%s). Jos et ole saanut varmistussähköpostia tai tarvitset uudelleenlähetyksen, ole hyvä ja napsauta allaolevaa painiketta. +resend_mail=Napsauta tästä uudelleenlähettääksesi aktivointisähköpostisi +send_reset_mail=Napsauta tästä (uudelleen)lähettääksesi salasanan alustussähköpostin reset_password=Nollaa salasanasi invalid_code=Sori, varmistuskoodisi on vanhentunut tai väärä. -reset_password_helper=Klikkaa tästä nollataksesi salasanasi +reset_password_helper=Napsauta tästä nollataksesi salasanasi password_too_short=Salasanan pituus ei voi olla vähemmän kuin 6 merkkiä. non_local_account=Vain paikallisten käyttäjätilien salasanan vaihto onnistuu Gogsin kautta. @@ -198,11 +199,11 @@ modify=Muokkaa [form] UserName=Käyttäjätunnus RepoName=Repon nimi -Email=Sähköposti osoite +Email=Sähköpostiosoite Password=Salasana Retype=Kirjoita salasana uudelleen -SSHTitle=SSH avain nimi -HttpsUrl=HTTPS URL +SSHTitle=SSH-avaimen nimi +HttpsUrl=HTTPS-osoite PayloadUrl=Payload URL TeamName=Tiimin nimi AuthName=Luvan nimi @@ -242,8 +243,8 @@ enterred_invalid_password=Ole hyvä ja varmista että kirjoittamasi salasana on user_not_exist=Käyttäjää ei ole olemassa. last_org_owner=Viimeisen käyttäjän poistaminen omistaja tiimistä ei ole sallittu, koska organisaatiossa tulee olla ainakin yksi omistaja. -invalid_ssh_key=Sori, emme pystyneet varmistamaan SSH avainta: %s -unable_verify_ssh_key=Gogs ei voi varmistaa SSH avaintasi, mutta oletamme että se on toimiva, ole hyvä ja tarkista se. +invalid_ssh_key=Pahoittelut, emme pystyneet varmistamaan SSH-avainta: %s +unable_verify_ssh_key=Gogs ei voi varmistaa SSH-avaintasi, mutta oletamme että se on toimiva, ole hyvä ja tarkista se. auth_failed=Todennus epäonnistui: %v still_own_repo=Tililläsi on yhä omistajuus ainakin yhteen repoon, sinun täytyy poistaa tai siirtää ne ensin. @@ -263,7 +264,7 @@ following=Seurataan follow=Seuraa unfollow=Lopeta seuraaminen -form.name_not_allowed=User name or pattern %q is not allowed. +form.name_not_allowed=Käyttäjätunnusta tai mallia %q ei ole sallittu. [settings] profile=Profiili @@ -277,7 +278,7 @@ applications=Sovellukset delete=Poista tili public_profile=Julkinen profiili -profile_desc=Sähköposti osoitteesi on julkinen ja käytetään tiliin liittyviin ilmoituksiin, ja nettipohjaisiin toimintoihin joita on tehty sivujen kautta. +profile_desc=Sähköpostiosoitteesi on julkinen ja käytetään tiliin liittyviin ilmoituksiin, ja nettipohjaisiin toimintoihin joita on tehty sivujen kautta. password_username_disabled=Ei-paikallinen tyyppisten käyttäjien ei sallita vaihtavan käyttäjänimeä. full_name=Kokonimi website=Nettisivut @@ -306,23 +307,23 @@ password_incorrect=Nykyinen salasana ei ole oikea. change_password_success=Salasanasi on onnistuneesti vaihdettu. Voit nyt kirjautua sisään käyttäen tätä uutta salasanaa. password_change_disabled=Ei-paikallinen tyyppisten käyttäjien ei sallita vaihtavan salasanaa. -emails=Sähköposti osoite -manage_emails=Hallitse sähköposti osoitteita +emails=Sähköpostiosoite +manage_emails=Hallitse sähköpostiosoitteita email_desc=Ensisijaista sähköpostiosoitettasi käytetään ilmoituksiin ja muihin toimintoihin. primary=Ensisijainen primary_email=Aseta ensisijaiseksi delete_email=Poista email_deletion=Sähköpostin poistaminen -email_deletion_desc=Tämän sähköposti osoitteen poistaminen poistaa siihen liittyvät tiedot tililtäsi. Haluatko jatkaa? +email_deletion_desc=Tämän sähköpostiosoitteen poistaminen poistaa siihen liittyvät tiedot tililtäsi. Haluatko jatkaa? email_deletion_success=Sähköposti on poistettu onnistuneesti! add_new_email=Lisää uusi sähköpostiosoite add_email=Lisää sähköposti -add_email_confirmation_sent=Uusi varmistus sähköposti on lähetetty osoitteeseen '%s', ole hyvä ja tarkista saapuneet seuraavan %d tunnin sisällä saadaksesi rekisteröintiprosessin valmiiksi. +add_email_confirmation_sent=Uusi varmistussähköposti on lähetetty osoitteeseen '%s', ole hyvä ja tarkista saapuneet seuraavan %d tunnin sisällä saadaksesi rekisteröintiprosessin valmiiksi. add_email_success=Uusi sähköpostiosoitteesi on lisätty onnistuneesti. manage_ssh_keys=Hallitse SSH avaimia add_key=Lisää avain -ssh_desc=Tämä on luettelo tiliisi liitetyistä SSH avaimista. Koska nämä avaimet sallivat kenen tahansa niitä käyttävän pääsevän repoihisi, on erittäin tärkeää että tunnistat ne. +ssh_desc=Tämä on luettelo tiliisi liitetyistä SSH-avaimista. Koska nämä avaimet sallivat kenen tahansa niitä käyttävän pääsevän repoihisi, on erittäin tärkeää että tunnistat ne. ssh_helper=Etkö tiedä miten?Tarkista Githubin opas luo oma SSH avain tai ratkaise yleisiä ongelmia joita voit kohdata SSHta käyttäessä. add_new_key=Lisää SSH avain ssh_key_been_used=Julkisen avaimen sisältö on käytetty. @@ -347,7 +348,7 @@ two_factor_off=Pois käytöstä two_factor_enable=Ota käyttöön two_factor_disable=Poista käytöstä two_factor_view_recovery_codes=Katso ja tallenna palautuskoodejasi turvallisessa paikassa. Voit käyttää niitä salasanoina, jos menetän pääsyn todennussovellukseen. -two_factor_http=HTTP/HTTPS toimintoihin et voi enää käyttää pelkkää käyttäjänimeä ja salasanaa. Luo ja käytä henkilökohtaisia pääsymerkkejä tunnuksinasi, esimerkiksi %[3]s. +two_factor_http=HTTP/HTTPS-toimintoihin et voi enää käyttää pelkkää käyttäjänimeä ja salasanaa. Luo ja käytä henkilökohtaisia pääsymerkkejä tunnuksinasi, esimerkiksi %[3]s. two_factor_enable_title=Ota käyttöön kaksivaiheinen todennus two_factor_scan_qr=Käytä todennus sovellustasi lukeaksesi kuvan: two_factor_or_enter_secret=Tai kirjoita salaisuus: @@ -399,7 +400,9 @@ owner=Omistaja repo_name=Repon nimi repo_name_helper=Hyvä repon nimi yleensä koostuu lyhyistä, mieleenpainuvista ja ainutlaatuisista avainsanoista. visibility=Näkyvyys +unlisted=Unlisted visiblity_helper=Tämä repo on yksityinen +unlisted_helper=This repository is Unlisted visiblity_helper_forced=Sivuston ylläpito on pakottanut kaikkien uusien repojen olevan yksityisiä visiblity_fork_helper=(Arvon vaihtaminen vaikuttaa kaikkiin forkkeihin) clone_helper=Tarvitsetko apua kloonauksessa? Vieraile osoitteessa Apua! @@ -429,7 +432,7 @@ repo_description_helper=Repon kuvaus. Enintään 512 merkkiä. repo_description_length=Käytettävissä olevat merkit form.reach_limit_of_creation=Omistaja on saavuttanut maksimi luontirajan %d repoa. -form.name_not_allowed=Repository name or pattern %q is not allowed. +form.name_not_allowed=Repon nimeä tai mallia %q ei ole sallittu. need_auth=Tarvitaan lupa migrate_type=Siirtotyyppi @@ -440,6 +443,7 @@ migrate.clone_address_desc=Tämä voi olla HTTP/HTTPS/GIT URL. migrate.clone_address_desc_import_local=Paikallisen palvelimen kansiopolun käyttö repon migraatiossa on myös salittua. migrate.permission_denied=Sinun ei sallita tuovan paikallisia repoja. migrate.invalid_local_path=Virheellinen paikallinen polku, ei ole olemassa tai ei ole hakemisto. +migrate.clone_address_resolved_to_blocked_local_address=Clone address resolved to a local network address that is implicitly blocked. migrate.failed=Siirto epäonnistui: %v mirror_from=peilaus alkaen @@ -462,10 +466,10 @@ push_exist_repo=Työnnä olemassaoleva repo komentoriviltä bare_message=Tässä repossa ei ole mitään sisältöä vielä. files=Tiedostot -branch=Branch +branch=Haara tree=Puu filter_branch_and_tag=Suodata haara tai tagi -branches=Branchit +branches=Haarat tags=Tagit issues=Ongelmat pulls=Pull-pyynnöt @@ -519,7 +523,7 @@ editor.directory_is_a_file=Annettu nimi '%s' on tiedosto, ei kansio. editor.file_is_a_symlink=Tiedosto '%s' on symlinkki jota ei voi muokata web-selaimesta. editor.filename_is_a_directory=Kansio nimeltä '%s' on jo olemassa tässä repossa. editor.file_editing_no_longer_exists=Tiedostoa '%s' jota olet muokkaamassa ei ole enää olemassa tässä repossa. -editor.file_changed_while_editing=Tiedoston sisältöä on muutettu aloittamisesi jälkeen. Klikkaa tästä nähdäksesi mitä on muutettu tai paina commit uudelleen ylikirjoittaaksesi muutokset. +editor.file_changed_while_editing=Tiedoston sisältöä on muutettu aloittamisesi jälkeen. Napsauta tästä nähdäksesi mitä on muutettu tai paina commit uudelleen ylikirjoittaaksesi muutokset. editor.file_already_exists=Tiedosto '%s' on jo olemassa tässä repossa. editor.no_changes_to_show=Ei muutoksia näytettäväksi. editor.fail_to_update_file=Tiedoston '%s' päivitys/luonti epäonnistui virheeseen: %v @@ -555,7 +559,7 @@ issues.new_label=Uusi tunniste issues.new_label_placeholder=Tunnisteen nimi... issues.create_label=Luo tunniste issues.label_templates.title=Lataa ennaltamääritelty tarrajoukko -issues.label_templates.info=Tarroja ei ole. Voit luoda uuden klikkaamalla "Uusi tarra" tai käyttää ennaltamääriteltyä tarrajoukkoa alta. +issues.label_templates.info=Tarroja ei ole. Voit luoda uuden napsauttamalla "Uusi tarra" tai käyttää ennaltamääriteltyä tarrajoukkoa alta. issues.label_templates.helper=Valitse tarrajoukko issues.label_templates.use=Käytä tätä tarrajoukkoa issues.label_templates.fail_to_load_file=Tarramallin lataus epäonnistui tiedostosta '%s': %v @@ -615,15 +619,15 @@ issues.label_deletion=Tunnisteen poistaminen issues.label_deletion_desc=Tämän tunnisteen poistaminen poistaa sen tiedot kaikista siihen liittyvistä ongelmista. Haluatko jatkaa? issues.label_deletion_success=Tunniste on poistettu onnistuneesti! issues.num_participants=%d osallistujaa -issues.attachment.open_tab=`Klikkaa nähdäksesi "%s" uudessa välilehdessä` -issues.attachment.download=`Klikkaa ladataksesi "%s"` +issues.attachment.open_tab=`Napsauta nähdäksesi "%s" uudessa välilehdessä` +issues.attachment.download=`Napsauta ladataksesi "%s"` pulls.new=Uusi pull pyyntö pulls.compare_changes=Vertaa muutoksia pulls.compare_changes_desc=Vertaa kahta branchia ja tee pull-pyyntö muutoksista. pulls.compare_base=base pulls.compare_compare=vertaa -pulls.filter_branch=Suodata branch +pulls.filter_branch=Suodata haara pulls.no_results=Tuloksia ei löytynyt. pulls.nothing_to_compare=Ei ole mitään verrattavaa koska base ja head branchit ovat tasoissa. pulls.nothing_merge_base=Ei ole mitään verrattavaa, koska kahdella haaralla on täysin erilainen historia. @@ -704,7 +708,7 @@ settings.branches_bare=Et voi hallita haaroja tyhjässä repossa. Lisää jotain settings.default_branch=Oletushaara settings.default_branch_desc=Oletushaaraa käytetään "pohjahaarana" commiteille, pull-pyynnöille ja sivustolla toteutetuille muokkauksille. settings.update=Päivitä -settings.update_default_branch_unsupported=Palvelimella oleva Git versio ei tue oletushaaran vaihtamista. +settings.update_default_branch_unsupported=Palvelimella oleva Git-versio ei tue oletushaaran vaihtamista. settings.update_default_branch_success=Repositoryn oletushaara päivitetty! settings.protected_branches=Suojatut haarat settings.protected_branches_desc=Suojaa haaroja pakotetulta push-operaatiolta, vahinkopoistamisilta ja sallitun listan committereilta. @@ -723,7 +727,7 @@ settings.protect_whitelist_teams=Tiimit joiden jäsenet voivat pushata tähän h settings.protect_whitelist_search_teams=Etsi tiimejä settings.update_protect_branch_success=Tämän haaran suojausasetukset on päivitetty! settings.hooks=Webkoukut -settings.githooks=Git koukut +settings.githooks=Git-koukut settings.basic_settings=Perusasetukset settings.mirror_settings=Peilauksen asetukset settings.sync_mirror=Synkronisoi nyt @@ -736,22 +740,22 @@ settings.wiki_desc=Ota wiki käyttöön settings.use_internal_wiki=Käytä sisäänrakennettua wikiä settings.allow_public_wiki_desc=Salli julkinen pääsy wikiin kun repo on yksityinen settings.use_external_wiki=Käytä ulkoista wikiä -settings.external_wiki_url=Ulkoinen Wiki URL -settings.external_wiki_url_desc=Vierailijat uudelleenohjataan URL-osoitteeseen kun he klikkaavat välilehteä. +settings.external_wiki_url=Ulkoisen wikin osoite +settings.external_wiki_url_desc=Vierailijat uudelleenohjataan URL-osoitteeseen kun he napsauttavat välilehteä. settings.issues_desc=Ota virheenseuranta käyttöön settings.use_internal_issue_tracker=Käytä sisäänrakennettua kevyttä virheenseurantaa settings.allow_public_issues_desc=Salli julkinen pääsy ongelmiin kun repo on yksityinen settings.use_external_issue_tracker=Käytä ulkoista vikaseurantaa settings.external_tracker_url=Ulkoisen virheenseurannan URL -settings.external_tracker_url_desc=Vierailijat ohjataan URL-osoitteeseen kun he klikkaavat välilehteä. -settings.tracker_url_format=Ulkoisen vikaseurannan URL muoto +settings.external_tracker_url_desc=Vierailijat ohjataan URL-osoitteeseen kun he napsauttavat välilehteä. +settings.tracker_url_format=Ulkoisen vikaseurannan osoitteen muoto settings.tracker_issue_style=Ulkoisen virheenseurannan nimeämistyyli: settings.tracker_issue_style.numeric=Numeerinen settings.tracker_issue_style.alphanumeric=Aakkosnumeerinen settings.tracker_url_format_desc=Voit käyttää paikkamerkkiä {user} {repo} {index} käyttäjänimelle, reponimelle ja vikanumerolle. -settings.pulls_desc=Enable pull requests to accept contributions between repositories and branches -settings.pulls.ignore_whitespace=Ignore changes in whitespace -settings.pulls.allow_rebase_merge=Allow use rebase to merge commits +settings.pulls_desc=Ota käyttöön pull-pyynnöt hyväksyäksesi vastaanotettua koodia repojen ja haarojen välillä +settings.pulls.ignore_whitespace=Ohita tyhjämerkkien muutokset +settings.pulls.allow_rebase_merge=Salli rebase yhdistäessä committeja settings.danger_zone=Vaaravyöhyke settings.cannot_fork_to_same_owner=Et voi forkata repoa alkuperäiselle omistajalleen. settings.new_owner_has_same_repo=Uudella omistajalla on jo samanniminen repo. Ole hyvä ja valitse toinen nimi. @@ -772,7 +776,7 @@ settings.wiki_deletion_success=Repo wiki tiedot on poistettu onnistuneesti. settings.delete=Poista tämä repo settings.delete_desc=Huomio, kun kerran poistat repon, niin ei ole paluuta. Varmista että haluat todella tehdä tämän. settings.delete_notices_1=- Tätä toimintoa EI VOI peruuttaa myöhemmin. -settings.delete_notices_2=- This operation will permanently delete everything in this repository, including Git data, issues, comments and collaborator access. +settings.delete_notices_2=- Tämä toiminto poistaa pysyvästi kaikki tästä reposta, mukaanlukien Git tiedot, ongelmat, kommentit ja yhteistyökumppanien pääsyoikeudet. settings.delete_notices_fork_1=- Kaikki haarat muuttuvat itsenäisiksi poiston jälkeen. settings.deletion_success=Repo on poistettu onnistuneesti! settings.update_settings_success=Repon asetukset on päivitetty onnistuneesti. @@ -784,13 +788,13 @@ settings.add_collaborator=Lisää uusi yhteistyökumppani settings.add_collaborator_success=Uusi yhteistyökumppani on lisätty. settings.delete_collaborator=Poista settings.collaborator_deletion=Yhteistyökumppanin poistaminen -settings.collaborator_deletion_desc=Tällä käyttäjällä ei tule enää olemaan yhteistyö pääsyä tähän repoon poistamisen jälkeen. Haluatko jatkaa? +settings.collaborator_deletion_desc=Tällä käyttäjällä ei tule enää olemaan yhteistyöpääsyä tähän repoon poistamisen jälkeen. Haluatko jatkaa? settings.remove_collaborator_success=Yhteistyökumppani on poistettu. settings.search_user_placeholder=Etsi käyttäjä... settings.org_not_allowed_to_be_collaborator=Yhteistyökumppaniksi ei voi lisätä organisaatiota. -settings.hooks_desc=Webkoukut muistuttavat paljon perus HTTP POST tapahtuma laukaisimia. Aina kun jotain tapahtuu Gogsissa, käsittelemme ilmoituksen määrittäämääsi kohteeseen. Lisätietoja webkoukku oppaassa. -settings.webhooks.add_new=Add a new webhook: -settings.webhooks.choose_a_type=Choose a type... +settings.hooks_desc=Webkoukut muistuttavat paljon perus HTTP POST -tapahtumalaukaisimia. Aina kun jotain tapahtuu Gogsissa, käsittelemme ilmoituksen määrittäämääsi kohteeseen. Lisätietoja webkoukku-oppaassa. +settings.webhooks.add_new=Lisää uusi webkoukku: +settings.webhooks.choose_a_type=Valitse tyyppi... settings.add_webhook=Lisää webkoukku settings.webhook_deletion=Poista webkoukku settings.webhook_deletion_desc=Tämän webkoukun poistaminen poistaa sen tiedot ja kaiken toimitushistorian. Haluatko jatkaa? @@ -805,14 +809,14 @@ settings.webhook.response=Vastaus settings.webhook.headers=Otsikot settings.webhook.payload=Payload settings.webhook.body=Body -settings.webhook.err_cannot_parse_payload_url=Cannot parse payload URL: %v -settings.webhook.err_cannot_use_local_addresses=Non admins are not allowed to use local addresses. +settings.webhook.err_cannot_parse_payload_url=Ei voida jäsentää hyötykuorman URL: %v +settings.webhook.url_resolved_to_blocked_local_address=Payload URL resolved to a local network address that is implicitly blocked. settings.githooks_desc=Git koukkujen voimanlähteenä on Git itse, voit muokata tuettujen koukkujen tiedostoja allaolevassa luettelossa suorittaaksesi mukautettuja toimintoja. settings.githook_edit_desc=Jos koukku ei ole käytössä, esitellään esimerkkisisältö. Sisällön jättäminen tyhjäksi arvoksi poistaa tämän koukun käytöstä. settings.githook_name=Koukun nimi settings.githook_content=Koukun sisältö settings.update_githook=Päivitys koukku -settings.add_webhook_desc=Gogs lähettää POST requestin määrittämääsi URLiin, mukaanlukien tapahtuneen eventin. Voit myös määrittää millaisen tiedostomuodon haluat saada koukun lauettua (JSON, x-www-form-urlencoded, XML, jne). Lisätietoa löytyy meidän koukut oppaasta. +settings.add_webhook_desc=Gogs lähettää POST-pyynnön määrittämääsi osoitteeseen, sekä tapahtunutta tapahtumaa koskevat lisätiedot. Voit myös määrittää millaisen tiedostomuodon haluat saada koukun lauettua (JSON, x-www-form-urlencoded, XML, jne). Lisätietoa löytyy koukut-oppaastamme. settings.payload_url=Payload URL settings.content_type=Sisältötyyppi settings.secret=Salaus @@ -821,7 +825,7 @@ settings.slack_username=Käyttäjätunnus settings.slack_icon_url=Kuvakkeen URL settings.slack_color=Väri settings.event_desc=Milloin pitäisi tämän webkoukun laueta? -settings.event_push_only=Vain push tilanteessa. +settings.event_push_only=Vain push-tilanteessa. settings.event_send_everything=Tarvitsen kaiken. settings.event_choose=Haluan valita, mitä tarvitsen. settings.event_create=Luo @@ -848,9 +852,9 @@ settings.update_hook_success=Webkoukku on päivitetty. settings.delete_webhook=Poista webkoukku settings.recent_deliveries=Viimeisimmät toimitukset settings.hook_type=Koukkutyyppi -settings.add_slack_hook_desc=Lisää Slack integraatio repoosi. -settings.add_discord_hook_desc=Lisää Discord integraatio repositoryysi. -settings.add_dingtalk_hook_desc=Lisää Dingtalk integraatio repositoryysi. +settings.add_slack_hook_desc=Lisää Slack-integraatio repoosi. +settings.add_discord_hook_desc=Lisää Discord-integraatio repositoryysi. +settings.add_dingtalk_hook_desc=Lisää Dingtalk-integraatio repositoryysi. settings.slack_token=Pääsymerkki settings.slack_domain=Verkkotunnus settings.slack_channel=Kanava @@ -867,8 +871,8 @@ settings.add_key_success=Uusi deploy avain '%s' on lisätty onnistuneesti! settings.deploy_key_deletion=Poista deploy avain settings.deploy_key_deletion_desc=Deploy avaimen poistaminen poistaa myös kaikki liitetyt käyttötiedot tästä reposta. Haluatko jatkaa? settings.deploy_key_deletion_success=Deploy avain on poistettu onnistuneesti! -settings.description_desc=Description of repository. Maximum 512 characters length. -settings.description_length=Available characters +settings.description_desc=Repon kuvaus. Enintään 512 merkkiä. +settings.description_length=Käytettävissä olevat merkit diff.browse_source=Selaa lähdekoodia diff.parent=vanhempi @@ -908,7 +912,7 @@ release.save_draft=Tallenna luonnos release.edit_release=Muokkaa versiota release.delete_release=Poista tämä versio release.deletion=Version poisto -release.deletion_desc=Tämän version poistaminen poistaa vastaavan Git tagin. Haluatko jatkaa? +release.deletion_desc=Tämän julkaisun poistaminen poistaa vastaavan Git-tagin. Haluatko jatkaa? release.deletion_success=Versio on poistettu onnistuneesti! release.tag_name_already_exist=Versio tällä taginimellä on jo olemassa. release.tag_name_invalid=Tagin nimi ei kelpaa @@ -933,8 +937,8 @@ team_name_helper=Käytät tätä nimeä mainitessasi tämän tiimin keskusteluis team_desc_helper=Mistä on kyse tässä tiimissä? team_permission_desc=Mikä käyttöoikeustaso tuliti tällä tiimillä olla? -form.name_not_allowed=Organization name or pattern %q is not allowed. -form.team_name_not_allowed=Team name or pattern %q is not allowed. +form.name_not_allowed=Organisaation nimi tai malli %q ei ole sallittu. +form.team_name_not_allowed=Tiimin nimi tai malli %q ei ole sallittu. settings=Asetukset settings.options=Valinnaiset @@ -1006,19 +1010,19 @@ first_page=Ensimmäinen last_page=Viimeisin total=Yhteensä: %d -dashboard.build_info=Build Information -dashboard.app_ver=Application version -dashboard.git_version=Git version -dashboard.go_version=Go version -dashboard.build_time=Build time -dashboard.build_commit=Build commit +dashboard.build_info=Rakentamistiedot +dashboard.app_ver=Sovellus versio +dashboard.git_version=Git-versio +dashboard.go_version=Go-versio +dashboard.build_time=Rakentamisaika +dashboard.build_commit=Rakentamis committi dashboard.statistic=Statistiikka dashboard.operations=Toiminnot dashboard.system_status=Järjestelmänvalvonnan tila -dashboard.statistic_info=Gogs tietokannassa on %d käyttäjää, %d organisaatiota, %d julkista avainta, %d repoa, %d tarkkailijaa, %d tähteä, %d toimea, %d sisäänkirjautunutta, %d ongelmaa, %d kommenttia, %d sosiaalista tiliä, %d seuraajaa, %d peiliä, %d julkaisua, %d kirjautumis lähdettä, %d webkoukkua, %d merkkipaalua, %d tunnistetta, %d koukku tehtävää, %d tiimiä, %d päivitys tehtävää, %d liitetiedostoa. +dashboard.statistic_info=Gogs-tietokannassa on %d käyttäjää, %d organisaatiota, %d julkista avainta, %d repoa, %d tarkkailijaa, %d tähteä, %d toimea, %d sisäänkirjautunutta, %d ongelmaa, %d kommenttia, %d sosiaalista tiliä, %d seuraajaa, %d peiliä, %d julkaisua, %d kirjautumislähdettä, %d webkoukkua, %d merkkipaalua, %d tunnistetta, %d koukkutehtävää, %d tiimiä, %d päivitystehtävää, %d liitetiedostoa. dashboard.operation_name=Toiminnon nimi dashboard.operation_switch=Vaihda -dashboard.select_operation_to_run=Please select operation to run +dashboard.select_operation_to_run=Valitse suoritettava toiminto dashboard.operation_run=Suorita dashboard.clean_unbind_oauth=Puhdista ei-liitetyt OAuthit dashboard.clean_unbind_oauth_success=Kaikki ei-liitetyt OAuthit on poistettu onnistuneesti. @@ -1030,7 +1034,7 @@ dashboard.delete_missing_repos=Poista kaikki repo tietueet jotka menettivät Git dashboard.delete_missing_repos_success=Kaikki repo tietueet jotka menettivät Git tiedostoja on poistettu onnistuneesti. dashboard.git_gc_repos=Suorita roskienkeruu repoille dashboard.git_gc_repos_success=Kaikki repot ovat tehneet roskienkeruun onnistuneesti. -dashboard.resync_all_sshkeys=Uudelleenkirjoita '.ssh/authorized_keys' tiedosto (varoitus: ei-Gogs avaimet menetetään) +dashboard.resync_all_sshkeys=Uudelleenkirjoita '.ssh/authorized_keys' -tiedosto (varoitus: ei-Gogs-avaimet menetetään) dashboard.resync_all_sshkeys_success=Kaikki julkiset avaimet on uudelleenkirjoitettu onnistuneesti. dashboard.resync_all_hooks=Uudelleensynkronoi kaikkien repositoryjen "pre-receive, update ja post-receive" hookit. dashboard.resync_all_hooks_success=Kaikkien repositoryjen "pre-receive, update ja post-receive" hookit synkronoitu. @@ -1110,7 +1114,7 @@ repos.stars=Äänet repos.issues=Ongelmat repos.size=Koko -auths.auth_sources=Authentication Sources +auths.auth_sources=Todennuslähteet auths.new=Lisää uusi lähde auths.name=Nimi auths.type=Tyyppi @@ -1124,7 +1128,7 @@ auths.domain=Verkkotunnus auths.host=Isäntä auths.port=Portti auths.bind_dn=Liitä DN -auths.bind_dn_helper=You can use '%s' as placeholder for username, e.g. DOM\%s +auths.bind_dn_helper=Voit käyttää '%s' käyttäjänimen paikkamerkkinä, esim. DOM\%s auths.bind_password=Liitä salasana auths.bind_password_helper=Varoitus: Tämä salasana tallennetaan tavallisena tekstinä. Älä käytä korkeasti etuoikeutetulla tilillä. auths.user_base=Käyttäjä hakuperuste @@ -1154,7 +1158,7 @@ auths.pam_service_name=PAM palvelun nimi auths.enable_auto_register=Ota käyttöön automaattinen rekisteröinti auths.edit=Muokkaa todennusasetusta auths.activated=Tämä todennus on aktivoitu -auths.default_auth=This authentication is default login source +auths.default_auth=Tämä todennus on oletuskirjautumislähde auths.new_success=Uusi todennus '%s' on luotu onnistuneesti. auths.update_success=Todennusasetus on päivitetty onnistuneesti. auths.update=Päivitä todennusasetus @@ -1168,173 +1172,177 @@ auths.github_api_endpoint=API päätepiste config.not_set=(ei ole asetettu) config.server_config=Palvelinasetukset -config.brand_name=Brand name +config.brand_name=Tuotemerkin nimi config.run_user=Suorita käyttäjänä config.run_mode=Suoritustila -config.server.external_url=External URL -config.server.domain=Domain -config.server.protocol=Protocol -config.server.http_addr=HTTP address -config.server.http_port=HTTP port -config.server.cert_file=Certificate file -config.server.key_file=Key file -config.server.tls_min_version=Minimum TLS version -config.server.unix_socket_permission=Unix socket permission -config.server.local_root_url=Local root URL -config.server.offline_mode=Offline mode -config.server.disable_router_log=Disable router log -config.server.enable_gzip=Enable Gzip -config.server.app_data_path=Application data path -config.server.load_assets_from_disk=Load assets from disk -config.server.landing_url=Landing URL +config.server.external_url=Ulkoinen osoite +config.server.domain=Verkkotunnus +config.server.protocol=Protokolla +config.server.http_addr=HTTP-osoite +config.server.http_port=HTTP-portti +config.server.cert_file=Varmennetiedosto +config.server.key_file=Avaintiedosto +config.server.tls_min_version=Minimi TLS versio +config.server.unix_socket_permission=Unix socketin käyttöoikeus +config.server.local_root_url=Paikallinen ROOT-URL +config.server.offline_mode=Yhteydetön tila +config.server.disable_router_log=Poista käytöstä URL-reitittimen loki +config.server.enable_gzip=Ota käyttöön Gzip +config.server.app_data_path=Sovelluksen tietojen polku +config.server.load_assets_from_disk=Lataa resurssit levyltä +config.server.landing_url=Laskeutumis URL config.ssh_config=SSH asetukset -config.ssh.enabled=Enabled -config.ssh.domain=Exposed domain -config.ssh.port=Exposed port -config.ssh.root_path=Root path -config.ssh.keygen_path=Keygen path -config.ssh.key_test_path=Key test path -config.ssh.minimum_key_size_check=Minimum key size check -config.ssh.minimum_key_sizes=Minimum key sizes -config.ssh.rewrite_authorized_keys_at_start=Rewrite "authorized_keys" at start -config.ssh.start_builtin_server=Start builtin server -config.ssh.listen_host=Listen host -config.ssh.listen_port=Listen port -config.ssh.server_ciphers=Server ciphers +config.ssh.enabled=Käytössä +config.ssh.domain=Paljastettu verkkotunnus +config.ssh.port=Paljastettu portti +config.ssh.root_path=Juuripolku +config.ssh.keygen_path=Avaingeneraattorin polku +config.ssh.key_test_path=Polku jossa avaimet testataan +config.ssh.minimum_key_size_check=Avaimen vähimmäiskoko tarkistus +config.ssh.minimum_key_sizes=Avaimen vähimmäiskoot +config.ssh.rewrite_authorized_keys_at_start=Uudelleenkirjoita "authorized_keys" alussa +config.ssh.start_builtin_server=Käynnistä sisäänrakennettu palvelin +config.ssh.listen_host=Kuuntele porttia +config.ssh.listen_port=Kuuntele porttia +config.ssh.server_ciphers=Palvelimen cipherit +config.ssh.server_macs=Server MACs config.repo_config=Repositoryn asetukset -config.repo.root_path=Root path -config.repo.script_type=Script type -config.repo.ansi_chatset=ANSI charset -config.repo.force_private=Force private -config.repo.max_creation_limit=Max creation limit -config.repo.preferred_licenses=Preferred licenses -config.repo.disable_http_git=Disable HTTP Git -config.repo.enable_local_path_migration=Enable local path migration -config.repo.enable_raw_file_render_mode=Enable raw file render mode -config.repo.commits_fetch_concurrency=Commits fetch concurrency -config.repo.editor.line_wrap_extensions=Editor line wrap extensions -config.repo.editor.previewable_file_modes=Editor previewable file modes -config.repo.upload.enabled=Upload enabled -config.repo.upload.temp_path=Upload temporary path -config.repo.upload.allowed_types=Upload allowed types -config.repo.upload.file_max_size=Upload file size limit -config.repo.upload.max_files=Upload files limit +config.repo.root_path=Juuripolku +config.repo.script_type=Komentosarjan tyyppi +config.repo.ansi_chatset=ANSI merkkisetti +config.repo.force_private=Pakota yksityiseksi +config.repo.max_creation_limit=Enimmäis-luontiraja +config.repo.preferred_licenses=Ensisijaiset lisenssit +config.repo.disable_http_git=Poista käytöstä HTTP Git +config.repo.enable_local_path_migration=Ota käyttöön paikallisen polun migraatio +config.repo.enable_raw_file_render_mode=Ota käyttöön raakatiedoston renderöinti tila +config.repo.commits_fetch_concurrency=Committien noudon samanaikaisuus +config.repo.editor.line_wrap_extensions=Muokkaimen rivityksen laajennukset +config.repo.editor.previewable_file_modes=Muokkaimen tiedostomuodot joita voi esikatsella +config.repo.upload.enabled=Tiedoston liittäminen käytössä +config.repo.upload.temp_path=Tiedoston liittämisen väliaikainen polku +config.repo.upload.allowed_types=Liitä sallitut tyypit +config.repo.upload.file_max_size=Liitettyjen tiedostojen kokoraja +config.repo.upload.max_files=Liitettyjen tiedostojen määrän raja config.db_config=Tietokannan asetukset -config.db.type=Type -config.db.host=Host -config.db.name=Name -config.db.user=User -config.db.ssl_mode=SSL mode -config.db.ssl_mode_helper=(for "postgres" only) -config.db.path=Path -config.db.path_helper=(for "sqlite3"only) -config.db.max_open_conns=Maximum open connections -config.db.max_idle_conns=Maximum idle connections +config.db.type=Tyyppi +config.db.host=Isäntä +config.db.name=Nimi +config.db.schema=Schema +config.db.schema_helper=(for "postgres" only) +config.db.user=Käyttäjä +config.db.ssl_mode=SSL-tila +config.db.ssl_mode_helper=(vain "postgres") +config.db.path=Polku +config.db.path_helper=(vain "sqlite3") +config.db.max_open_conns=Avointen yhteyksien enimmäismäärä +config.db.max_idle_conns=Avointen joutokäyntiyhteyksien enimmäismäärä -config.security_config=Security configuration -config.security.login_remember_days=Login remember days -config.security.cookie_remember_name=Remember cookie -config.security.cookie_username=Username cookie -config.security.cookie_secure=Enable secure cookie -config.security.reverse_proxy_auth_user=Reverse proxy authentication header -config.security.enable_login_status_cookie=Enable login status cookie -config.security.login_status_cookie_name=Login status cookie +config.security_config=Turvallisuuden asetukset +config.security.login_remember_days=Muista kirjautuminen päiviä +config.security.cookie_remember_name=Muista eväste +config.security.cookie_username=Käyttäjänimi eväste +config.security.cookie_secure=Ota käyttöön turvallinen eväste +config.security.reverse_proxy_auth_user=Käänteinen välityspalvelimen todennusotsikko +config.security.enable_login_status_cookie=Ota käyttöön kirjautumisen tilaeväste +config.security.login_status_cookie_name=Kirjautumisen tila eväste +config.security.local_network_allowlist=Local network allowlist -config.email_config=Email configuration -config.email.enabled=Enabled -config.email.subject_prefix=Subject prefix -config.email.host=Host -config.email.from=From -config.email.user=User -config.email.disable_helo=Disable HELO -config.email.helo_hostname=HELO hostname -config.email.skip_verify=Skip certificate verify -config.email.use_certificate=Use custom certificate -config.email.cert_file=Certificate file -config.email.key_file=Key file -config.email.use_plain_text=Use plain text -config.email.add_plain_text_alt=Add plain text alternative -config.email.send_test_mail=Send test email -config.email.test_mail_failed=Failed to send test email to '%s': %v -config.email.test_mail_sent=Test email has been sent to '%s'. +config.email_config=Sähköpostiasetukset +config.email.enabled=Käytössä +config.email.subject_prefix=Aiheen etuliite +config.email.host=Isäntä +config.email.from=Lähettäjä +config.email.user=Käyttäjä +config.email.disable_helo=Poista käytöstä HELO +config.email.helo_hostname=HELO isäntänimi +config.email.skip_verify=Ohita varmenteen tarkistaminen +config.email.use_certificate=Käytä mukautettua varmennetta +config.email.cert_file=Varmennetiedosto +config.email.key_file=Avaintiedosto +config.email.use_plain_text=Käytä pelkkää tekstiä +config.email.add_plain_text_alt=Lisää pelkän tekstin vaihtoehto +config.email.send_test_mail=Lähetä testisähköposti +config.email.test_mail_failed=Testisähköpostin lähettäminen vastaanottajalle '%s' epäonnistui: %v +config.email.test_mail_sent=Testi sähköposti on lähetetty vastaanottajalle '%s'. -config.auth_config=Authentication configuration -config.auth.activate_code_lives=Activate code lives -config.auth.reset_password_code_lives=Reset password code lives -config.auth.require_email_confirm=Require email confirmation -config.auth.require_sign_in_view=Require sign in view -config.auth.disable_registration=Disable registration -config.auth.enable_registration_captcha=Enable registration captcha -config.auth.enable_reverse_proxy_authentication=Enable reverse proxy authentication -config.auth.enable_reverse_proxy_auto_registration=Enable reverse proxy auto registration -config.auth.reverse_proxy_authentication_header=Reverse proxy authentication header +config.auth_config=Todennuksen asetukset +config.auth.activate_code_lives=Aktiivinen koodi elämät ennen vanhenemista +config.auth.reset_password_code_lives=Nollaa salasana koodi elämät +config.auth.require_email_confirm=Vaadi sähköpostivahvistus +config.auth.require_sign_in_view=Vaadi sisäänkirjautuminen nähdäksesi +config.auth.disable_registration=Poista käytöstä rekisteröinti +config.auth.enable_registration_captcha=Ota rekisteröityminen captcha käyttöön +config.auth.enable_reverse_proxy_authentication=Ota käyttöön käänteinen välityspalvelimen todennus +config.auth.enable_reverse_proxy_auto_registration=Ota käyttöön käänteinen välityspalvelimen automaattinen rekisteröinti +config.auth.reverse_proxy_authentication_header=Käänteinen välityspalvelimen todennusotsikko -config.user_config=User configuration -config.user.enable_email_notify=Enable email notification +config.user_config=Käyttäjän asetukset +config.user.enable_email_notify=Ota käyttöön sähköposti ilmoitukset config.session_config=Istunnon asetukset -config.session.provider=Provider -config.session.provider_config=Provider config -config.session.cookie_name=Cookie -config.session.https_only=HTTPS only -config.session.gc_interval=GC interval -config.session.max_life_time=Max life time -config.session.csrf_cookie_name=CSRF cookie +config.session.provider=Tarjoaja +config.session.provider_config=Tarjoajan asetukset +config.session.cookie_name=Eväste +config.session.https_only=Vain HTTPS +config.session.gc_interval=Roskienkeruun väli +config.session.max_life_time=Maksimi elinaika +config.session.csrf_cookie_name=CSRF-eväste config.cache_config=Välimuistin asetukset -config.cache.adapter=Adapter -config.cache.interval=GC interval -config.cache.host=Host +config.cache.adapter=Adapteri +config.cache.interval=Roskienkeruun väli +config.cache.host=Isäntä config.http_config=HTTP-asetukset -config.http.access_control_allow_origin=Access control allow origin +config.http.access_control_allow_origin=Käyttöoikeuden valvonta salli alkuperä -config.attachment_config=Attachment configuration -config.attachment.enabled=Enabled -config.attachment.path=Path -config.attachment.allowed_types=Allowed types -config.attachment.max_size=Size limit -config.attachment.max_files=Files limit +config.attachment_config=Liitteen asetukset +config.attachment.enabled=Käytössä +config.attachment.path=Polku +config.attachment.allowed_types=Sallitut tyypit +config.attachment.max_size=Kokoraja +config.attachment.max_files=Tiedostojen määrän raja -config.release_config=Release configuration -config.release.attachment.enabled=Attachment enabled -config.release.attachment.allowed_types=Attachment allowed types -config.release.attachment.max_size=Attachment size limit -config.release.attachment.max_files=Attachment files limit +config.release_config=Julkaisu asetukset +config.release.attachment.enabled=Liite käytössä +config.release.attachment.allowed_types=Liitteen sallitut tyypit +config.release.attachment.max_size=Liitteen kokoraja +config.release.attachment.max_files=Liitteiden määrän raja config.picture_config=Kuva asetukset -config.picture.avatar_upload_path=User avatar upload path -config.picture.repo_avatar_upload_path=Repository avatar upload path -config.picture.gravatar_source=Gravatar source -config.picture.disable_gravatar=Disable Gravatar -config.picture.enable_federated_avatar=Enable federated avatars +config.picture.avatar_upload_path=Käyttäjän profiilikuvan tiedoston liittämisen polku +config.picture.repo_avatar_upload_path=Repon profiilikuvan tiedoston liittämisen polku +config.picture.gravatar_source=Gravatar-lähde +config.picture.disable_gravatar=Poista Gravatar käytöstä +config.picture.enable_federated_avatar=Ota käyttöön ulkopuoliset profiilikuvat -config.mirror_config=Mirror configuration -config.mirror.default_interval=Default interval +config.mirror_config=Peilauksen asetukset +config.mirror.default_interval=Oletus aikaväli config.webhook_config=Webkoukku asetukset -config.webhook.types=Types -config.webhook.deliver_timeout=Deliver timeout -config.webhook.skip_tls_verify=Skip TLS verify +config.webhook.types=Tyypit +config.webhook.deliver_timeout=Toimitus aikakatkaisu +config.webhook.skip_tls_verify=Ohita TLS tarkistaminen config.git_config=Git asetukset -config.git.disable_diff_highlight=Disable diff syntax highlight -config.git.max_diff_lines=Diff lines limit (for a single file) -config.git.max_diff_line_characters=Diff characters limit (for a single line) -config.git.max_diff_files=Diff files limit (for a single diff) -config.git.gc_args=GC arguments -config.git.migrate_timeout=Migration timeout -config.git.mirror_timeout=Mirror fetch timeout -config.git.clone_timeout=Clone timeout -config.git.pull_timeout=Pull timeout -config.git.gc_timeout=GC timeout +config.git.disable_diff_highlight=Poista koodinväritys käytöstä diff-näkymässä +config.git.max_diff_lines=Vertaa rivien rajaa (yhden tiedoston osalta) +config.git.max_diff_line_characters=Vertaa merkkien rajaa (yhden tiedoston osalta) +config.git.max_diff_files=Vertaa tiedostojen rajaa (yhden diffin osalta) +config.git.gc_args=Roskienkeruun parametrit +config.git.migrate_timeout=Migraation aikakatkaisu +config.git.mirror_timeout=Peilauksen haun aikakatkaisu +config.git.clone_timeout=Kloonauksen aikakatkaisu +config.git.pull_timeout=Pull aikakatkaisu +config.git.gc_timeout=Roskienkeruun aikakatkaisu -config.lfs_config=LFS configuration -config.lfs.storage=Storage -config.lfs.objects_path=Objects path +config.lfs_config=LFS asetukset +config.lfs.storage=Tallennustila +config.lfs.objects_path=Objektien polku config.log_config=Loki asetukset config.log_file_root_path=Lokitiedoston juuren polku @@ -1385,9 +1393,9 @@ delete_branch=poistettu haara %[2]s kohteesta %[3]s push_tag=pushattu tagi %[2]s kohteeseen %[3]s delete_tag=poistettu tagi %[2]s kohteesta %[3]s fork_repo=forkattu repo kohteeseen %s -mirror_sync_push=synced commits to %[3]s at %[4]s from mirror -mirror_sync_create=synced new reference %[2]s to %[3]s from mirror -mirror_sync_delete=synced and deleted reference %[2]s at %[3]s from mirror +mirror_sync_push=synkattu commitit kohteeseen %[3]s paikassa %[4]s peilistä +mirror_sync_create=synkattu uusi viite %[2]s kohteeseen %[3]s peilistä +mirror_sync_delete=synkattu ja poistettu viite %[2]s paikassa %[3]s peilistä [tool] ago=sitten @@ -1409,10 +1417,10 @@ months=%d kuukautta %s years=%d vuotta %s raw_seconds=sekuntia raw_minutes=minuuttia -raw_hours=hours +raw_hours=tuntia [dropzone] -default_message=Pudota tiedostot tähän tai klikkaa lataamista varten. +default_message=Pudota tiedostot tähän tai napsauta lataamista varten. invalid_input_type=Tämäntyyppisiä tiedostoja ei voi ladata. file_too_big=Tiedostokoko ({{filesize}} MB) koko ylittää enimmäiskoon ({{maxFilesize}} MB). remove_file=Poista tiedosto diff --git a/conf/locale/locale_fr-FR.ini b/conf/locale/locale_fr-FR.ini index 3e979f2ad..f7077c4bb 100644 --- a/conf/locale/locale_fr-FR.ini +++ b/conf/locale/locale_fr-FR.ini @@ -44,20 +44,21 @@ issues=Tickets cancel=Annuler [status] -page_not_found=Page Not Found -internal_server_error=Internal Server Error +page_not_found=Page non trouvée +internal_server_error=Erreur interne du serveur [install] install=Installation title=Instructions pour la première exécution docker_helper=Si vous exécutez Gogs grâce à Docker, merci de lire la procédure attentivement avant de modifier quoi que ce soit sur cette page ! -requite_db_desc=Gogs requiert MySQL, PostgreSQL, SQLite3, MSSQL ou TiDB. +requite_db_desc=Gogs requires MySQL, PostgreSQL, SQLite3 or TiDB (via MySQL protocol). db_title=Paramètres de la base de données db_type=Type de base de données host=Hôte user=Utilisateur password=Mot de passe db_name=Nom de base de données +db_schema=Schema db_helper=Veuillez utiliser le moteur INNODB avec le jeu de caractères utf8_general_ci pour MySQL. ssl_mode=Mode SSL path=Emplacement @@ -125,7 +126,7 @@ run_user_not_match=L'utilisateur d'exécution saisi n'est pas l'utilisateur d'ex smtp_host_missing_port=Le numéro de port est manquant dans l'adresse de l'Hôte SMTP. invalid_smtp_from=Le champ SMTP Provenant de n'est pas valide: %v save_config_failed=La sauvegarde de la configuration a échoué : %v -init_failed=Failed to initialize application: %v +init_failed=L'initialisation de l'application a échoué. invalid_admin_setting=Paramètres du compte administrateur invalides : %v install_success=Bienvenue ! Nous sommes heureux que vous ayez choisi Gogs, amusez-vous et prenez soin de vous. invalid_log_root_path=L'emplacement racine des fichiers logs est invalide : %v @@ -263,7 +264,7 @@ following=Abonnements follow=Suivre unfollow=Ne plus suivre -form.name_not_allowed=User name or pattern %q is not allowed. +form.name_not_allowed=Le nom de l'utilisateur ou le schéma n'est pas autorisé [settings] profile=Profil @@ -374,10 +375,10 @@ token_name=Nom du jeton generate_token=Générer le jeton generate_token_succees=Nouveau jeton d'accès a été généré avec succès ! Assurez-vous de copier votre nouveau jeton d'accès personnel maintenant. Vous ne serez pas en mesure de le revoir ! delete_token=Supprimer -access_token_deletion=Suppression du jeton d'accès +access_token_deletion=Suppression du jeton d'accès personnel access_token_deletion_desc=Supprimer ce jeton d'accès supprimera tous les accès de l'application. Voulez-vous continuer ? -delete_token_success=Le jeton d'accèsa été supprimé avec succès ! N'oubliez pas de mettre à jour vos applications. -token_name_exists=Token with same name already exists. +delete_token_success=Le jeton d'accès a été supprimé avec succès ! N'oubliez pas de mettre à jour vos applications. +token_name_exists=Un jeton avec le même nom existe déjà. orgs.none=Vous n'êtes membre d'aucune organisation. orgs.leave_title=Quitter une organisation @@ -399,7 +400,9 @@ owner=Propriétaire repo_name=Nom du dépôt repo_name_helper=Idéalement, le nom d'un dépot devrait être court, mémorable et unique. visibility=Visibilité +unlisted=Unlisted visiblity_helper=Ce dépôt est privé +unlisted_helper=This repository is Unlisted visiblity_helper_forced=L'administrateur du site a forcé tous les nouveaux dépôts à être privés visiblity_fork_helper=(Les changements de cette valeur affecteront tous les forks) clone_helper=Besoin d'aide pour dupliquer ? Visitez l'aide ! @@ -429,9 +432,9 @@ repo_description_helper=Description du dépôt. 512 caractères maximum. repo_description_length=Caractères disponibles form.reach_limit_of_creation=Le propriétaire a atteint le nombre maximal de %d dépôts créés. -form.name_not_allowed=Repository name or pattern %q is not allowed. +form.name_not_allowed=Le nom de l'utilisateur ou le schéma n'est pas autorisé -need_auth=Nécessite une Autorisation +need_auth=Nécessite une autorisation migrate_type=Type de migration migrate_type_helper=Ce dépôt sera un miroir migrate_repo=Migrer le dépôt @@ -440,6 +443,7 @@ migrate.clone_address_desc=Cela peut être une URL HTTP/HTTPS/GIT. migrate.clone_address_desc_import_local=Vous êtes aussi autorisé à migrer un dépôt via un chemin local du serveur. migrate.permission_denied=Vous n'êtes pas autorisé à importer des dépôts locaux. migrate.invalid_local_path=Chemin local non valide, non existant ou n'étant pas un dossier. +migrate.clone_address_resolved_to_blocked_local_address=Clone address resolved to a local network address that is implicitly blocked. migrate.failed=Echec de migration: %v mirror_from=miroir de @@ -450,7 +454,7 @@ copy_link_error=Appuyez sur ⌘-C ou Ctrl-C pour copier copied=Copié unwatch=Ne plus suivre watch=Suivre -unstar=Retirer le vote +unstar=Retirer des favoris star=Voter fork=Fork @@ -789,8 +793,8 @@ settings.remove_collaborator_success=Collaborateur supprimé. settings.search_user_placeholder=Rechercher un utilisateur... settings.org_not_allowed_to_be_collaborator=Une organisation n'est pas autorisée à être ajoutée en tant que collaborateur. settings.hooks_desc=Les Webhooks sont des déclencheurs de POST HTTP . Lorsque qu'un événement se produit dans Gogs, une notification sera envoyée vers l'hôte cible préalablement spécifié. Apprenez-en davantage dans le Guide des Webhooks. -settings.webhooks.add_new=Add a new webhook: -settings.webhooks.choose_a_type=Choose a type... +settings.webhooks.add_new=Ajouter un nouveau rappel HTTP +settings.webhooks.choose_a_type=Choisis le type de... settings.add_webhook=Ajouter un Webhook settings.webhook_deletion=Supprimer le Webhook settings.webhook_deletion_desc=Supprimer ce webhook va supprimer ses informations et l'historique de livraison. Voulez-vous continuer ? @@ -805,8 +809,8 @@ settings.webhook.response=Réponse settings.webhook.headers=Entêtes  settings.webhook.payload=Payload settings.webhook.body=Corps -settings.webhook.err_cannot_parse_payload_url=Cannot parse payload URL: %v -settings.webhook.err_cannot_use_local_addresses=Non admins are not allowed to use local addresses. +settings.webhook.err_cannot_parse_payload_url=Impossible d'analyser l'URL : %v +settings.webhook.url_resolved_to_blocked_local_address=Payload URL resolved to a local network address that is implicitly blocked. settings.githooks_desc=Les Hooks Git sont alimentés par Git lui même. Les Hooks compatibles sont modifiables dans la liste ci-dessous pour effectuer des opérations personnalisées. settings.githook_edit_desc=Si un Hook est inactif, un exemple de contenu vous sera proposé. Un contenu laissé vide signifie un Hook inactif. settings.githook_name=Nom du Hook @@ -933,8 +937,8 @@ team_name_helper=Ce nom sera utilisé pour mentionner l'équipe dans les convers team_desc_helper=Présentation de l'équipe team_permission_desc=Quel niveau d'accès cette équipe devrait-elle posséder ? -form.name_not_allowed=Organization name or pattern %q is not allowed. -form.team_name_not_allowed=Team name or pattern %q is not allowed. +form.name_not_allowed=Le nom de l'organisation ou le modèle n'est pas autorisé. +form.team_name_not_allowed=Le nom de l'équipe ou le pattern %q n'est pas autorisé. settings=Paramètres settings.options=Options @@ -1006,19 +1010,19 @@ first_page=Première last_page=Dernière total=Total : %d -dashboard.build_info=Build Information -dashboard.app_ver=Application version -dashboard.git_version=Git version -dashboard.go_version=Go version -dashboard.build_time=Build time -dashboard.build_commit=Build commit +dashboard.build_info=Informations sur la construction +dashboard.app_ver=Version de l'application +dashboard.git_version=Version de Git +dashboard.go_version=Version de Go +dashboard.build_time=Temps de compilation +dashboard.build_commit=Commit dashboard.statistic=Statistiques dashboard.operations=Opérations dashboard.system_status=État du système dashboard.statistic_info=La base de données Gogs contient %d utilisateurs, %d organisations, %d clés publiques, %d dépôts, %d surveillances de dépôts, %d votes, %d actions, %d accès, %d tickets, %d commentaires, %d comptes de réseaux sociaux, %d abonnements, %d miroirs, %d versions, %d connexions d'origine, %d webhooks, %d versions, %d labels, %d tâches hook, %d équipes, %d tâches de mise à jour, %d fichiers. dashboard.operation_name=Nom de l'Opération dashboard.operation_switch=Basculer -dashboard.select_operation_to_run=Please select operation to run +dashboard.select_operation_to_run=Veuillez sélectionner l'opération à exécuter dashboard.operation_run=Exécuter dashboard.clean_unbind_oauth=Nettoyer les associations OAuthes dashboard.clean_unbind_oauth_success=Tous unbind OAuthes ont été supprimés avec succès. @@ -1168,173 +1172,177 @@ auths.github_api_endpoint=API Endpoint config.not_set=(non défini) config.server_config=Configuration du Serveur -config.brand_name=Brand name +config.brand_name=Nom de la marque config.run_user=Utilisateur système config.run_mode=Mode d'Éxécution -config.server.external_url=External URL -config.server.domain=Domain -config.server.protocol=Protocol -config.server.http_addr=HTTP address -config.server.http_port=HTTP port -config.server.cert_file=Certificate file -config.server.key_file=Key file -config.server.tls_min_version=Minimum TLS version -config.server.unix_socket_permission=Unix socket permission -config.server.local_root_url=Local root URL -config.server.offline_mode=Offline mode -config.server.disable_router_log=Disable router log -config.server.enable_gzip=Enable Gzip -config.server.app_data_path=Application data path -config.server.load_assets_from_disk=Load assets from disk -config.server.landing_url=Landing URL +config.server.external_url=URL externe +config.server.domain=Domaine +config.server.protocol=Protocole +config.server.http_addr=Adresse HTTP +config.server.http_port=Port HTTP +config.server.cert_file=Fichier de certificat +config.server.key_file=Fichier de la clé +config.server.tls_min_version=Version minimale de TLS +config.server.unix_socket_permission=Autorisation du socket Unix +config.server.local_root_url=URL racine locale +config.server.offline_mode=Mode hors connexion +config.server.disable_router_log=Désactiver la journalisation du routeur +config.server.enable_gzip=Activer Gzip +config.server.app_data_path=Chemin des données de l'application +config.server.load_assets_from_disk=Charger les ressources depuis le disque +config.server.landing_url=URL de destination (collecte) config.ssh_config=Configuration SSH -config.ssh.enabled=Enabled -config.ssh.domain=Exposed domain -config.ssh.port=Exposed port -config.ssh.root_path=Root path -config.ssh.keygen_path=Keygen path -config.ssh.key_test_path=Key test path -config.ssh.minimum_key_size_check=Minimum key size check -config.ssh.minimum_key_sizes=Minimum key sizes -config.ssh.rewrite_authorized_keys_at_start=Rewrite "authorized_keys" at start -config.ssh.start_builtin_server=Start builtin server -config.ssh.listen_host=Listen host -config.ssh.listen_port=Listen port -config.ssh.server_ciphers=Server ciphers +config.ssh.enabled=Activé +config.ssh.domain=Domaine exposé +config.ssh.port=Port exposé +config.ssh.root_path=Emplacement racine +config.ssh.keygen_path=Chemin de la clé +config.ssh.key_test_path=Chemin de test de la clé +config.ssh.minimum_key_size_check=Vérification de la taille minimale des clés +config.ssh.minimum_key_sizes=Taille minimale des clés +config.ssh.rewrite_authorized_keys_at_start=Réécriture de "authorized_keys" au démarrage +config.ssh.start_builtin_server=Démarrer le serveur intégré +config.ssh.listen_host=Hôte en écoute +config.ssh.listen_port=Port d'écoute +config.ssh.server_ciphers=Suites de chiffrement +config.ssh.server_macs=Server MACs config.repo_config=Configuration du dépôt -config.repo.root_path=Root path -config.repo.script_type=Script type -config.repo.ansi_chatset=ANSI charset -config.repo.force_private=Force private -config.repo.max_creation_limit=Max creation limit -config.repo.preferred_licenses=Preferred licenses -config.repo.disable_http_git=Disable HTTP Git -config.repo.enable_local_path_migration=Enable local path migration -config.repo.enable_raw_file_render_mode=Enable raw file render mode -config.repo.commits_fetch_concurrency=Commits fetch concurrency -config.repo.editor.line_wrap_extensions=Editor line wrap extensions -config.repo.editor.previewable_file_modes=Editor previewable file modes -config.repo.upload.enabled=Upload enabled -config.repo.upload.temp_path=Upload temporary path -config.repo.upload.allowed_types=Upload allowed types -config.repo.upload.file_max_size=Upload file size limit -config.repo.upload.max_files=Upload files limit +config.repo.root_path=Emplacement racine +config.repo.script_type=Type de script +config.repo.ansi_chatset=Jeu de caractères ANSI +config.repo.force_private=Forcer en tant que privé +config.repo.max_creation_limit=Limite de création +config.repo.preferred_licenses=Licences préférées +config.repo.disable_http_git=Désactiver Git HTTP +config.repo.enable_local_path_migration=Activer la migration de chemin locale +config.repo.enable_raw_file_render_mode=Activer le mode de rendu des fichiers de manière brute +config.repo.commits_fetch_concurrency=Récupération simultanée des commits +config.repo.editor.line_wrap_extensions=Extensions de retour à la ligne de l'éditeur +config.repo.editor.previewable_file_modes=Modes de prévisualisation des fichiers de l'éditeur +config.repo.upload.enabled=Publication activée +config.repo.upload.temp_path=Chemin du téléchargement temporaire +config.repo.upload.allowed_types=Types de publications autorisées +config.repo.upload.file_max_size=Taille maximale des fichiers envoyés +config.repo.upload.max_files=Limite sur les fichiers publiés config.db_config=Configuration de la Base de Données config.db.type=Type -config.db.host=Host -config.db.name=Name -config.db.user=User -config.db.ssl_mode=SSL mode -config.db.ssl_mode_helper=(for "postgres" only) -config.db.path=Path -config.db.path_helper=(for "sqlite3"only) -config.db.max_open_conns=Maximum open connections -config.db.max_idle_conns=Maximum idle connections +config.db.host=Serveur hôte +config.db.name=Nom +config.db.schema=Schema +config.db.schema_helper=(for "postgres" only) +config.db.user=Utilisateur +config.db.ssl_mode=Mode SSL +config.db.ssl_mode_helper=("postgres" uniquement) +config.db.path=Chemin +config.db.path_helper=(pour "sqlite3" seulement) +config.db.max_open_conns=Nombre maximum de connexions ouvertes +config.db.max_idle_conns=Nombre maximum de connexions inactives -config.security_config=Security configuration -config.security.login_remember_days=Login remember days -config.security.cookie_remember_name=Remember cookie -config.security.cookie_username=Username cookie -config.security.cookie_secure=Enable secure cookie -config.security.reverse_proxy_auth_user=Reverse proxy authentication header -config.security.enable_login_status_cookie=Enable login status cookie -config.security.login_status_cookie_name=Login status cookie +config.security_config=Configuration de sécurité +config.security.login_remember_days=Rester connecté plusieurs jours +config.security.cookie_remember_name=Mémoriser le cookie +config.security.cookie_username=Cookie du nom d'utilisateur +config.security.cookie_secure=Activer les cookies sécurisés +config.security.reverse_proxy_auth_user=Inverser l'en-tête d'authentification du proxy +config.security.enable_login_status_cookie=Activer le cookie d'état de connexion +config.security.login_status_cookie_name=Cookie de statut de connexion +config.security.local_network_allowlist=Local network allowlist -config.email_config=Email configuration -config.email.enabled=Enabled -config.email.subject_prefix=Subject prefix -config.email.host=Host -config.email.from=From -config.email.user=User -config.email.disable_helo=Disable HELO -config.email.helo_hostname=HELO hostname -config.email.skip_verify=Skip certificate verify -config.email.use_certificate=Use custom certificate -config.email.cert_file=Certificate file -config.email.key_file=Key file -config.email.use_plain_text=Use plain text -config.email.add_plain_text_alt=Add plain text alternative -config.email.send_test_mail=Send test email -config.email.test_mail_failed=Failed to send test email to '%s': %v -config.email.test_mail_sent=Test email has been sent to '%s'. +config.email_config=Configuration de l’e-mail +config.email.enabled=Activé +config.email.subject_prefix=Préfixe du sujet +config.email.host=Hôte +config.email.from=De: +config.email.user=Utilisateur +config.email.disable_helo=Désactiver HELO +config.email.helo_hostname=Nom d’hôte HELO +config.email.skip_verify=Ignorer la vérification du certificat +config.email.use_certificate=Utiliser un certificat personnalisé +config.email.cert_file=Fichier de certificat +config.email.key_file=Fichier de la clé +config.email.use_plain_text=Utiliser le texte brut +config.email.add_plain_text_alt=Ajouter une alternative au texte brut +config.email.send_test_mail=Envoyer un e-mail de test +config.email.test_mail_failed=Impossible d'envoyer un e-mail de test à '%s' : +config.email.test_mail_sent=Un e-mail de test à été envoyé à '%s'. -config.auth_config=Authentication configuration -config.auth.activate_code_lives=Activate code lives -config.auth.reset_password_code_lives=Reset password code lives -config.auth.require_email_confirm=Require email confirmation -config.auth.require_sign_in_view=Require sign in view -config.auth.disable_registration=Disable registration -config.auth.enable_registration_captcha=Enable registration captcha -config.auth.enable_reverse_proxy_authentication=Enable reverse proxy authentication -config.auth.enable_reverse_proxy_auto_registration=Enable reverse proxy auto registration -config.auth.reverse_proxy_authentication_header=Reverse proxy authentication header +config.auth_config=Configuration de l'authentification +config.auth.activate_code_lives=Activer les vies sur les codes +config.auth.reset_password_code_lives=Vies sur les codes de réinitialisation des mots de passes +config.auth.require_email_confirm=Nécessite une confirmation par e-mail +config.auth.require_sign_in_view=Connexion obligatoire pour visualiser +config.auth.disable_registration=Désactiver les inscriptions +config.auth.enable_registration_captcha=Activer le CAPTCHA à l'inscription +config.auth.enable_reverse_proxy_authentication=Activer l'authentification par proxy inversé +config.auth.enable_reverse_proxy_auto_registration=Activer l'enregistrement automatique du proxy inversé +config.auth.reverse_proxy_authentication_header=En-tête d'authentification du proxy inversé -config.user_config=User configuration -config.user.enable_email_notify=Enable email notification +config.user_config=Configuration de l'utilisateur +config.user.enable_email_notify=Activer les notifications par e-mail config.session_config=Configuration de session -config.session.provider=Provider -config.session.provider_config=Provider config +config.session.provider=Fournisseur +config.session.provider_config=Configuration du fournisseur config.session.cookie_name=Cookie -config.session.https_only=HTTPS only -config.session.gc_interval=GC interval -config.session.max_life_time=Max life time -config.session.csrf_cookie_name=CSRF cookie +config.session.https_only=HTTPS uniquement +config.session.gc_interval=Intervalle du GC +config.session.max_life_time=Durée de vie maximale +config.session.csrf_cookie_name=Cookie CSRF config.cache_config=Configuration du Cache -config.cache.adapter=Adapter -config.cache.interval=GC interval -config.cache.host=Host +config.cache.adapter=Adaptateur +config.cache.interval=Intervalle du GC +config.cache.host=Serveur hôte config.http_config=Configuration HTTP -config.http.access_control_allow_origin=Access control allow origin +config.http.access_control_allow_origin=Autoriser le partage d’accès avec l’origine -config.attachment_config=Attachment configuration -config.attachment.enabled=Enabled -config.attachment.path=Path -config.attachment.allowed_types=Allowed types -config.attachment.max_size=Size limit -config.attachment.max_files=Files limit +config.attachment_config=Configuration des pièces jointes +config.attachment.enabled=Activé +config.attachment.path=Chemin +config.attachment.allowed_types=Types autorisés +config.attachment.max_size=Taille limite +config.attachment.max_files=Limite de fichiers -config.release_config=Release configuration -config.release.attachment.enabled=Attachment enabled -config.release.attachment.allowed_types=Attachment allowed types -config.release.attachment.max_size=Attachment size limit -config.release.attachment.max_files=Attachment files limit +config.release_config=Configuration de la version +config.release.attachment.enabled=Pièces jointes activées +config.release.attachment.allowed_types=Types de pièces jointes autorisés +config.release.attachment.max_size=Limite de taille des pièces jointes +config.release.attachment.max_files=Limite du nombre de fichiers joints config.picture_config=Configuration d'Image -config.picture.avatar_upload_path=User avatar upload path -config.picture.repo_avatar_upload_path=Repository avatar upload path -config.picture.gravatar_source=Gravatar source -config.picture.disable_gravatar=Disable Gravatar -config.picture.enable_federated_avatar=Enable federated avatars +config.picture.avatar_upload_path=Chemin de téléchargement de l'avatar de l'utilisateur +config.picture.repo_avatar_upload_path=Chemin de téléchargement de l'avatar du référentiel de versions +config.picture.gravatar_source=Origine Gravatar +config.picture.disable_gravatar=Désactiver Gravatar +config.picture.enable_federated_avatar=Activer les avatars unifiés -config.mirror_config=Mirror configuration -config.mirror.default_interval=Default interval +config.mirror_config=Configuration de mise en miroir +config.mirror.default_interval=Intervalle par défaut config.webhook_config=Configuration Webhook config.webhook.types=Types -config.webhook.deliver_timeout=Deliver timeout -config.webhook.skip_tls_verify=Skip TLS verify +config.webhook.deliver_timeout=Délai de livraison +config.webhook.skip_tls_verify=Ignorer la vérification TLS config.git_config=Configuration de Git -config.git.disable_diff_highlight=Disable diff syntax highlight -config.git.max_diff_lines=Diff lines limit (for a single file) -config.git.max_diff_line_characters=Diff characters limit (for a single line) -config.git.max_diff_files=Diff files limit (for a single diff) -config.git.gc_args=GC arguments -config.git.migrate_timeout=Migration timeout -config.git.mirror_timeout=Mirror fetch timeout -config.git.clone_timeout=Clone timeout -config.git.pull_timeout=Pull timeout -config.git.gc_timeout=GC timeout +config.git.disable_diff_highlight=Désactiver la coloration syntaxique des différences +config.git.max_diff_lines=Limite de lignes différentes (pour un seul fichier) +config.git.max_diff_line_characters=Limite de caractères différents (pour une seule ligne) +config.git.max_diff_files=Limite de fichiers différents (pour une seule différence) +config.git.gc_args=Arguments GC +config.git.migrate_timeout=Délai de migration dépassé +config.git.mirror_timeout=Délai de récupération du miroir dépassé +config.git.clone_timeout=Délai de clonage dépassé +config.git.pull_timeout=Délai de récupération des sources dépassé +config.git.gc_timeout=GB délai expiré -config.lfs_config=LFS configuration -config.lfs.storage=Storage -config.lfs.objects_path=Objects path +config.lfs_config=Configuration LFS +config.lfs.storage=Espace de stockage +config.lfs.objects_path=Chemin d'accès des objets config.log_config=Configuration du Journal config.log_file_root_path=Emplacement Racine du Fichier Journal @@ -1409,7 +1417,7 @@ months=%[2]s %[1]d mois years=%[2]s %[1]d ans raw_seconds=secondes raw_minutes=minutes -raw_hours=hours +raw_hours=heures [dropzone] default_message=Déposez les fichiers ici ou cliquez pour télécharger. diff --git a/conf/locale/locale_gl-ES.ini b/conf/locale/locale_gl-ES.ini index 9fc371a5b..8c36256d8 100644 --- a/conf/locale/locale_gl-ES.ini +++ b/conf/locale/locale_gl-ES.ini @@ -51,13 +51,14 @@ internal_server_error=Internal Server Error install=Instalación title=Pasos da instalación por primeira vez docker_helper=Se está executando Gogs usando Docker, por favor lea estas pautas antes de cambiar nada nesta páxina! -requite_db_desc=Gogs require MySQL, PostgreSQL, SQLite3, MSSQL ouTiDB. +requite_db_desc=Gogs requires MySQL, PostgreSQL, SQLite3 or TiDB (via MySQL protocol). db_title=Configuración de base de datos db_type=Tipo de base de datos host=Host user=Persoa usuaria password=Contrasinal db_name=Nome da base de datos +db_schema=Schema db_helper=Por favor, empregue o motor INNODB coa configuración de caracteres utf8_general_ci para MySQL. ssl_mode=Modo SSL path=Ruta @@ -400,7 +401,9 @@ owner=Propietario repo_name=Nome do repositorio repo_name_helper=Os grandes nomes de repositorios son curtos, memorables e únicos. visibility=Visibilidade +unlisted=Unlisted visiblity_helper=Este repositorio é privado +unlisted_helper=This repository is Unlisted visiblity_helper_forced=O administrador web obrigou a todos os repositorios novos a ser privados visiblity_fork_helper=(Este cambio afectará a todos os forks) clone_helper=Necesitas axuda co clone? Consulta a Axuda! @@ -441,6 +444,7 @@ migrate.clone_address_desc=Pode ser unha URL HTTP/HTTPS/GIT. migrate.clone_address_desc_import_local=Tamén podes migrar un repositorio mediante a ruta do servidor local. migrate.permission_denied=Non che está permitido importar repositorios locais. migrate.invalid_local_path=Rutal local inválida, non existe ou non é un directorio. +migrate.clone_address_resolved_to_blocked_local_address=Clone address resolved to a local network address that is implicitly blocked. migrate.failed=Migración fallida: %v mirror_from=réplica de @@ -807,7 +811,7 @@ settings.webhook.headers=Encabezado settings.webhook.payload=Payload settings.webhook.body=Corpo da mensaxe settings.webhook.err_cannot_parse_payload_url=Cannot parse payload URL: %v -settings.webhook.err_cannot_use_local_addresses=Non admins are not allowed to use local addresses. +settings.webhook.url_resolved_to_blocked_local_address=Payload URL resolved to a local network address that is implicitly blocked. settings.githooks_desc=Os Git Hooks son unha funcionalidade do propio Git, podes editar os ficheiros dos hooks soportados na seguinte lista para aplicar operacións personalizadas. settings.githook_edit_desc=Se o hook non está activo, mostrarase contido de exemplo. Deixar o contido baleiro deshabilitará este hook. settings.githook_name=Nome do Hook @@ -1203,6 +1207,7 @@ config.ssh.start_builtin_server=Start builtin server config.ssh.listen_host=Listen host config.ssh.listen_port=Listen port config.ssh.server_ciphers=Server ciphers +config.ssh.server_macs=Server MACs config.repo_config=Repository configuration config.repo.root_path=Root path @@ -1227,6 +1232,8 @@ config.db_config=Configuración da base de datos config.db.type=Type config.db.host=Host config.db.name=Name +config.db.schema=Schema +config.db.schema_helper=(for "postgres" only) config.db.user=User config.db.ssl_mode=SSL mode config.db.ssl_mode_helper=(for "postgres" only) @@ -1243,6 +1250,7 @@ config.security.cookie_secure=Enable secure cookie config.security.reverse_proxy_auth_user=Reverse proxy authentication header config.security.enable_login_status_cookie=Enable login status cookie config.security.login_status_cookie_name=Login status cookie +config.security.local_network_allowlist=Local network allowlist config.email_config=Email configuration config.email.enabled=Enabled diff --git a/conf/locale/locale_hu-HU.ini b/conf/locale/locale_hu-HU.ini index 734a09f2c..70d5b2366 100644 --- a/conf/locale/locale_hu-HU.ini +++ b/conf/locale/locale_hu-HU.ini @@ -44,20 +44,21 @@ issues=Problémák cancel=Mégse [status] -page_not_found=Page Not Found -internal_server_error=Internal Server Error +page_not_found=Az oldal nem található +internal_server_error=Belső kiszolgálóhiba [install] install=Telepítés title=Telepítés első indításkor docker_helper=Ha Docker alatt fut a Gogs, akkor kérjük, figyelmesen olvassa el az irányelveket, mielőtt bármit megváltoztat ezen az oldalon! -requite_db_desc=A Gogs-hoz szükséges a MySQL, PostgreSQL, SQLite3, MSSQL vagy a TiDB valamelyike. +requite_db_desc=Gogs requires MySQL, PostgreSQL, SQLite3 or TiDB (via MySQL protocol). db_title=Adatbázis beállításai db_type=Adatbázis-kezelő host=Kiszolgáló user=Felhasználónév password=Jelszó db_name=Adatbázis neve +db_schema=Schema db_helper=MySQL szerveren kérjük használjon INNODB motort utf8_general_ci karakterkészlettel. ssl_mode=SSL mód path=Elérési út @@ -125,7 +126,7 @@ run_user_not_match=Futtató felhasználó más, mint az aktuális felhasználó: smtp_host_missing_port=Az SMTP kiszolgáló címéből hiányzik a portszám. invalid_smtp_from=Érvénytelen SMTP Feladó mező: %v save_config_failed=Hiba a beállítások tárolásakor: %v -init_failed=Failed to initialize application: %v +init_failed=Nem sikerült inicializálni az alkalmazást: %v invalid_admin_setting=Hibás a rendszergazdai fiók beállítása: %v install_success=Üdv! Örülünk, hogy a Gogs-ot választottad, érezd jól magad és viseld gondját. invalid_log_root_path=Naplózás gyökérmappa érvénytelen: %v @@ -263,7 +264,7 @@ following=Követve follow=Követés unfollow=Követés törlése -form.name_not_allowed=User name or pattern %q is not allowed. +form.name_not_allowed=A %q felhasználónév, vagy minta nem engedélyezett. [settings] profile=Profil @@ -399,7 +400,9 @@ owner=Tulajdonos repo_name=Tároló neve repo_name_helper=A jó tárolónév általában rövid, megjegyezhető és egyedi kulcsszavakból tevődik össze. visibility=Láthatóság +unlisted=Unlisted visiblity_helper=Ez egy privát tároló +unlisted_helper=This repository is Unlisted visiblity_helper_forced=Az oldal adminisztrátora kötelezővé tette, hogy minden új repository Privát legyen visiblity_fork_helper=(Az érték megváltoztatása kihat minden fork-ra) clone_helper=Segítség kell a klónozáshoz? Látogasd meg a Súgót! @@ -429,7 +432,7 @@ repo_description_helper=Tároló leírása. Maximum 512 karakter hosszúságú. repo_description_length=Rendelkezésre álló karakterek form.reach_limit_of_creation=A tulajdonos túllépte a maximum létrehozható tárolók számát (%d). -form.name_not_allowed=Repository name or pattern %q is not allowed. +form.name_not_allowed=A %q repository név, vagy minta nem engedélyezett. need_auth=Hitelesítés szükséges migrate_type=Migráció típusa @@ -440,6 +443,7 @@ migrate.clone_address_desc=Ez lehet egy HTTP/HTTPS/GIT URL. migrate.clone_address_desc_import_local=Migrálhat tárolót a helyi fájlrendszerből is az útvonal megadásával. migrate.permission_denied=Az Ön számára nem engedélyezett a helyi tároló importálása. migrate.invalid_local_path=Érvénytelen helyi elérési út; nem létezik vagy nem mappára mutat. +migrate.clone_address_resolved_to_blocked_local_address=Clone address resolved to a local network address that is implicitly blocked. migrate.failed=Migráció sikertelen: %v mirror_from=tükrözi: @@ -789,8 +793,8 @@ settings.remove_collaborator_success=Az eggyüttműködő eltávolítva. settings.search_user_placeholder=Felhasználók keresése... settings.org_not_allowed_to_be_collaborator=Szervezet hozzáadása együttműködőként nem engedélyezett. settings.hooks_desc=A Webhook-ok olyanok, mint az alapvető HTTP POST esemény triggerek. Amikor valami történik a Gogsban, akkor küldünk róla értesítést a címre amit beállítasz. Többet olvashatsz erről a Webhooks Guide-ban. -settings.webhooks.add_new=Add a new webhook: -settings.webhooks.choose_a_type=Choose a type... +settings.webhooks.add_new=Új webhook készítése: +settings.webhooks.choose_a_type=Válassz egy típust... settings.add_webhook=Webhook hozzáadása settings.webhook_deletion=Webhook Törlése settings.webhook_deletion_desc=Ennek a Webhook-nak a törlése eltávolít róla minden információt, és a korábbi kézbesítéseknek a naplóját is. Biztosan folytatja? @@ -805,8 +809,8 @@ settings.webhook.response=Válasz settings.webhook.headers=Fejlécek settings.webhook.payload=Tartalom settings.webhook.body=Törzs -settings.webhook.err_cannot_parse_payload_url=Cannot parse payload URL: %v -settings.webhook.err_cannot_use_local_addresses=Non admins are not allowed to use local addresses. +settings.webhook.err_cannot_parse_payload_url=Nem sikerült feldolgozni a végpont URL címet: %v +settings.webhook.url_resolved_to_blocked_local_address=Payload URL resolved to a local network address that is implicitly blocked. settings.githooks_desc=A GIT hook-okat maga a Git működteti, szerkesztheted a támogatott hook-ok fájljait a következő listában hogy egyéni műveleteket is végezzenek. settings.githook_edit_desc=Ha a hook nincs aktiválva, akkor egy minta sablon lesz mutatva. Ha a tartalmát üresen hagyja, akkor ez a hook ki lesz kapcsolva. settings.githook_name=Hook megnevezés @@ -933,8 +937,8 @@ team_name_helper=Ezzel a névvel tudsz majd a csapatra hivatkozni. team_desc_helper=Miről szól ez a csapat? team_permission_desc=Milyen jogosultsága legyen ennek a csapatnak? -form.name_not_allowed=Organization name or pattern %q is not allowed. -form.team_name_not_allowed=Team name or pattern %q is not allowed. +form.name_not_allowed=A szervezetnév, vagy minta '%q' nem engedélyezett. +form.team_name_not_allowed=A '%q' csapatnév, vagy minta nem engedélyezett settings=Beállítások settings.options=Opciók @@ -1006,19 +1010,19 @@ first_page=Első last_page=Utolsó total=Összesen: %d -dashboard.build_info=Build Information -dashboard.app_ver=Application version -dashboard.git_version=Git version -dashboard.go_version=Go version -dashboard.build_time=Build time -dashboard.build_commit=Build commit +dashboard.build_info=Program építési információi +dashboard.app_ver=Alkalmazás verziója +dashboard.git_version=Git verzió +dashboard.go_version=Go verzió +dashboard.build_time=Program építésének időtartama +dashboard.build_commit=Program építési commit-ja dashboard.statistic=Statisztika dashboard.operations=Műveletek dashboard.system_status=Rendszerfigyelő Állapota dashboard.statistic_info=Az adatbázisban található: %d felhasználó, %d szervezet, %d publikus kulcs, %d tároló, %d figyelő, %d csillagozás, %d művelet, %d hozzáférés, %d probléma, %d megjegyzés, %d közösségi fiók, %d követő, %d tükör, %d kiadás, %d authentikáció, %d webhook, %d mérföldkő, %d cimke, %d hook feladat, %d csoport, %d frissítési feladat, %d csatolmány. dashboard.operation_name=Művelet neve dashboard.operation_switch=Átváltás -dashboard.select_operation_to_run=Please select operation to run +dashboard.select_operation_to_run=Kérlek válaszd ki a futtatandó műveletet dashboard.operation_run=Futtatás dashboard.clean_unbind_oauth=A nem használt OAuthok kitakarítása dashboard.clean_unbind_oauth_success=Minden nem használt OAuth sikeresen kitakarítva. @@ -1154,7 +1158,7 @@ auths.pam_service_name=PAM szolgáltatás neve auths.enable_auto_register=Automatikus regisztráció engedélyezése auths.edit=Hitelesítési beállítások szerkesztése auths.activated=Ez a hitelesítés mód aktiválva van -auths.default_auth=This authentication is default login source +auths.default_auth=Ez a hitelesítés az alapértelmezett bejelentkezési forrás auths.new_success=Az új hitelesítési mód '%s' sikeresen hozzáadva. auths.update_success=A hitelesítési beállítások sikeresen firssítve lettek. auths.update=Hitelesítési forrás frissítése @@ -1168,173 +1172,177 @@ auths.github_api_endpoint=API végpont config.not_set=(nincs beállítva) config.server_config=Kiszolgáló konfiguráció -config.brand_name=Brand name +config.brand_name=Oldalnév kiválasztása config.run_user=Futtató felhasználó config.run_mode=Futtatás módja -config.server.external_url=External URL +config.server.external_url=Külső URL config.server.domain=Domain -config.server.protocol=Protocol -config.server.http_addr=HTTP address +config.server.protocol=Protokoll +config.server.http_addr=HTTP cím config.server.http_port=HTTP port -config.server.cert_file=Certificate file -config.server.key_file=Key file -config.server.tls_min_version=Minimum TLS version -config.server.unix_socket_permission=Unix socket permission -config.server.local_root_url=Local root URL -config.server.offline_mode=Offline mode +config.server.cert_file=Tanusítvány fájl +config.server.key_file=Kulcsfájl +config.server.tls_min_version=Legalacsonyabb TLS verzió +config.server.unix_socket_permission=Unix socket engedély +config.server.local_root_url=Helyi gyökér URL +config.server.offline_mode=Offline mód config.server.disable_router_log=Disable router log -config.server.enable_gzip=Enable Gzip -config.server.app_data_path=Application data path -config.server.load_assets_from_disk=Load assets from disk -config.server.landing_url=Landing URL +config.server.enable_gzip=Gzip bekapcsolása +config.server.app_data_path=Alkalmazás adatok elérési útvonala +config.server.load_assets_from_disk=Program hozzávalók betöltése lemezről +config.server.landing_url=Beérkezési URL config.ssh_config=SSH konfiguráció -config.ssh.enabled=Enabled -config.ssh.domain=Exposed domain -config.ssh.port=Exposed port -config.ssh.root_path=Root path -config.ssh.keygen_path=Keygen path -config.ssh.key_test_path=Key test path -config.ssh.minimum_key_size_check=Minimum key size check -config.ssh.minimum_key_sizes=Minimum key sizes -config.ssh.rewrite_authorized_keys_at_start=Rewrite "authorized_keys" at start -config.ssh.start_builtin_server=Start builtin server -config.ssh.listen_host=Listen host -config.ssh.listen_port=Listen port -config.ssh.server_ciphers=Server ciphers +config.ssh.enabled=Bekapcsolva +config.ssh.domain=Külső domain +config.ssh.port=Nyitott port +config.ssh.root_path=Gyökér elérési útvonal +config.ssh.keygen_path=ssh-keygen elérési útvonala +config.ssh.key_test_path=Kulcs ellenőrzés útvonala +config.ssh.minimum_key_size_check=Minimális kulcsméret ellenőrzés +config.ssh.minimum_key_sizes=Kulcsok minimális mérete +config.ssh.rewrite_authorized_keys_at_start=SSH "authorized_keys" fájl újraírása indításnál +config.ssh.start_builtin_server=Beépített kiszolgáló indítása +config.ssh.listen_host=Hallgatási cím +config.ssh.listen_port=Hallgatási port +config.ssh.server_ciphers=Kiszolgáló titkosítás módszerei +config.ssh.server_macs=Server MACs config.repo_config=Tároló konfiguráció -config.repo.root_path=Root path -config.repo.script_type=Script type -config.repo.ansi_chatset=ANSI charset -config.repo.force_private=Force private -config.repo.max_creation_limit=Max creation limit -config.repo.preferred_licenses=Preferred licenses -config.repo.disable_http_git=Disable HTTP Git -config.repo.enable_local_path_migration=Enable local path migration -config.repo.enable_raw_file_render_mode=Enable raw file render mode +config.repo.root_path=Gyökér elérési útvonal +config.repo.script_type=Szkript típus +config.repo.ansi_chatset=ANSI karakterkészlet +config.repo.force_private=Privát erőltetése +config.repo.max_creation_limit=Maximum repo létrehozási korlát +config.repo.preferred_licenses=Előnyben részesített licencek +config.repo.disable_http_git=HTTP-n keresztüli git kikapcsolása +config.repo.enable_local_path_migration=Engedélyezi a migrációt helyi elérési út alapján +config.repo.enable_raw_file_render_mode=nyers fájl kijelzés bekapcsolása config.repo.commits_fetch_concurrency=Commits fetch concurrency config.repo.editor.line_wrap_extensions=Editor line wrap extensions config.repo.editor.previewable_file_modes=Editor previewable file modes -config.repo.upload.enabled=Upload enabled -config.repo.upload.temp_path=Upload temporary path -config.repo.upload.allowed_types=Upload allowed types -config.repo.upload.file_max_size=Upload file size limit +config.repo.upload.enabled=Feltöltés bekapcsolva +config.repo.upload.temp_path=Ideiglenes feltöltési útvonal +config.repo.upload.allowed_types=Feltöltésnél engedélyezett típusok +config.repo.upload.file_max_size=Maximálisan feltölthető fájlméret config.repo.upload.max_files=Upload files limit config.db_config=Adatbázis konfiguráció -config.db.type=Type -config.db.host=Host -config.db.name=Name -config.db.user=User -config.db.ssl_mode=SSL mode -config.db.ssl_mode_helper=(for "postgres" only) -config.db.path=Path -config.db.path_helper=(for "sqlite3"only) -config.db.max_open_conns=Maximum open connections -config.db.max_idle_conns=Maximum idle connections +config.db.type=Típus +config.db.host=Kiszolgáló +config.db.name=Név +config.db.schema=Schema +config.db.schema_helper=(for "postgres" only) +config.db.user=Felhasználó +config.db.ssl_mode=SSL mód +config.db.ssl_mode_helper=(csak "postgres" esetében) +config.db.path=Útvonal +config.db.path_helper=(csak "sqlite3" esetében) +config.db.max_open_conns=Maximum egyszerre nyitott csatlakozások +config.db.max_idle_conns=Maximum tétlen kapcsolatok száma -config.security_config=Security configuration -config.security.login_remember_days=Login remember days -config.security.cookie_remember_name=Remember cookie -config.security.cookie_username=Username cookie -config.security.cookie_secure=Enable secure cookie -config.security.reverse_proxy_auth_user=Reverse proxy authentication header -config.security.enable_login_status_cookie=Enable login status cookie -config.security.login_status_cookie_name=Login status cookie +config.security_config=Biztonsági beállítások +config.security.login_remember_days=Bejelentkezési adatok megjegyzésének napjai +config.security.cookie_remember_name=Emlékezési süti elnevezése +config.security.cookie_username=Felhasználónév süti +config.security.cookie_secure=Biztonságos sütik engedélyezése +config.security.reverse_proxy_auth_user=Fordított proxy hitelesítési fejléc +config.security.enable_login_status_cookie=Bejelentkezési állapot süti bekapcsolása +config.security.login_status_cookie_name=Bejelentkezési állapot süti neve +config.security.local_network_allowlist=Local network allowlist -config.email_config=Email configuration -config.email.enabled=Enabled -config.email.subject_prefix=Subject prefix -config.email.host=Host -config.email.from=From -config.email.user=User -config.email.disable_helo=Disable HELO -config.email.helo_hostname=HELO hostname -config.email.skip_verify=Skip certificate verify -config.email.use_certificate=Use custom certificate -config.email.cert_file=Certificate file -config.email.key_file=Key file -config.email.use_plain_text=Use plain text -config.email.add_plain_text_alt=Add plain text alternative -config.email.send_test_mail=Send test email -config.email.test_mail_failed=Failed to send test email to '%s': %v -config.email.test_mail_sent=Test email has been sent to '%s'. +config.email_config=E-mail beállítások +config.email.enabled=Bekapcsolva +config.email.subject_prefix=Tárgy előtag +config.email.host=Kiszolgáló +config.email.from=Tól/től +config.email.user=Felhasználó +config.email.disable_helo=HELO letiltása +config.email.helo_hostname=HELO állományneve +config.email.skip_verify=Tanusítvány igazolásának átugrása +config.email.use_certificate=Egyedi tanusítvány használata +config.email.cert_file=Tanusítvány fájl +config.email.key_file=Kulcsfájl +config.email.use_plain_text=Sima szöveg (plaintext) használata +config.email.add_plain_text_alt=Sima szöveg (plaintext) alternatív szövege +config.email.send_test_mail=Teszt e-mail küldése +config.email.test_mail_failed=Nem sikerült kiküldeni a teszt e-mailt '%s'-nek: %v +config.email.test_mail_sent=Teszt e-mail kiküldve '%s'-nek. -config.auth_config=Authentication configuration +config.auth_config=Hitelesítési beállítások config.auth.activate_code_lives=Activate code lives -config.auth.reset_password_code_lives=Reset password code lives -config.auth.require_email_confirm=Require email confirmation -config.auth.require_sign_in_view=Require sign in view -config.auth.disable_registration=Disable registration -config.auth.enable_registration_captcha=Enable registration captcha -config.auth.enable_reverse_proxy_authentication=Enable reverse proxy authentication -config.auth.enable_reverse_proxy_auto_registration=Enable reverse proxy auto registration -config.auth.reverse_proxy_authentication_header=Reverse proxy authentication header +config.auth.reset_password_code_lives=Jelszó visszaállítási kód élettartama +config.auth.require_email_confirm=E-mail megerősítés szükségessé tétele +config.auth.require_sign_in_view=Bejelentkező nézet követelése +config.auth.disable_registration=Regisztráció kikapcsolása +config.auth.enable_registration_captcha=CAPTCHA engedélyezése regisztrációhoz +config.auth.enable_reverse_proxy_authentication=Fordított proxy hitelesítés bekapcsolása +config.auth.enable_reverse_proxy_auto_registration=Fordított proxy automatikus regisztrációjának bekapcsolása +config.auth.reverse_proxy_authentication_header=Fordított proxy hitelesítési fejléc -config.user_config=User configuration -config.user.enable_email_notify=Enable email notification +config.user_config=Felhasználói beállítások +config.user.enable_email_notify=Email értesítés engedélyezése config.session_config=Munkamenet beállítások -config.session.provider=Provider -config.session.provider_config=Provider config -config.session.cookie_name=Cookie -config.session.https_only=HTTPS only -config.session.gc_interval=GC interval -config.session.max_life_time=Max life time -config.session.csrf_cookie_name=CSRF cookie +config.session.provider=Session ellátó +config.session.provider_config=Session ellátó konfigurációja +config.session.cookie_name=Süti +config.session.https_only=Csak HTTPS +config.session.gc_interval=Szemétgyűjtés intervalluma +config.session.max_life_time=Maximális élettartam +config.session.csrf_cookie_name=CSRF süti neve config.cache_config=Cache beállítás config.cache.adapter=Adapter -config.cache.interval=GC interval -config.cache.host=Host +config.cache.interval=Szemétgyűjtés intervalluma +config.cache.host=Kiszolgáló config.http_config=HTTP beállítások -config.http.access_control_allow_origin=Access control allow origin +config.http.access_control_allow_origin=Access-Control-Allow-Origin fejléc -config.attachment_config=Attachment configuration -config.attachment.enabled=Enabled -config.attachment.path=Path -config.attachment.allowed_types=Allowed types -config.attachment.max_size=Size limit -config.attachment.max_files=Files limit +config.attachment_config=Melléklet beállítás +config.attachment.enabled=Bekapcsolva +config.attachment.path=Elérési útvonal +config.attachment.allowed_types=Engedélyezett típusok +config.attachment.max_size=Maximum méret +config.attachment.max_files=Maximálisan feltölthető fájlok mennyisége -config.release_config=Release configuration -config.release.attachment.enabled=Attachment enabled -config.release.attachment.allowed_types=Attachment allowed types -config.release.attachment.max_size=Attachment size limit -config.release.attachment.max_files=Attachment files limit +config.release_config=Szoftver kiadás beállítás +config.release.attachment.enabled=Mellékletek bekapcsolva +config.release.attachment.allowed_types=Engedélyezett melléklet típusok +config.release.attachment.max_size=Melléklet maximális mérete +config.release.attachment.max_files=Maximális mellékelt fájlok mennyisége config.picture_config=Kép beállítások -config.picture.avatar_upload_path=User avatar upload path -config.picture.repo_avatar_upload_path=Repository avatar upload path -config.picture.gravatar_source=Gravatar source -config.picture.disable_gravatar=Disable Gravatar +config.picture.avatar_upload_path=Profilkép feltöltési útvonal +config.picture.repo_avatar_upload_path=Repository kép feltöltési útvonal +config.picture.gravatar_source=Gravatar forrás +config.picture.disable_gravatar=Gravatar Kikapcsolása config.picture.enable_federated_avatar=Enable federated avatars -config.mirror_config=Mirror configuration -config.mirror.default_interval=Default interval +config.mirror_config=Tükrözés beállítás +config.mirror.default_interval=Alapértelmezett intervallum config.webhook_config=Webhook beállítás -config.webhook.types=Types -config.webhook.deliver_timeout=Deliver timeout -config.webhook.skip_tls_verify=Skip TLS verify +config.webhook.types=Típusok +config.webhook.deliver_timeout=Kézbesítési időtúllépés +config.webhook.skip_tls_verify=TLS ellenőrzés kihagyása config.git_config=Git konfiguráció -config.git.disable_diff_highlight=Disable diff syntax highlight +config.git.disable_diff_highlight=Különbségi szintakszis kiemelésének kikapcsolása config.git.max_diff_lines=Diff lines limit (for a single file) config.git.max_diff_line_characters=Diff characters limit (for a single line) config.git.max_diff_files=Diff files limit (for a single diff) -config.git.gc_args=GC arguments -config.git.migrate_timeout=Migration timeout -config.git.mirror_timeout=Mirror fetch timeout -config.git.clone_timeout=Clone timeout -config.git.pull_timeout=Pull timeout -config.git.gc_timeout=GC timeout +config.git.gc_args=Szemétgyűjtő (GC) argumentumok +config.git.migrate_timeout=Migráció időtúllépés +config.git.mirror_timeout=Tükör fetch időtúllépés +config.git.clone_timeout=Klónozási időtúllépés +config.git.pull_timeout=Lehúzási időtúllépés +config.git.gc_timeout=Szemétgyűjtés időtúllépése -config.lfs_config=LFS configuration -config.lfs.storage=Storage -config.lfs.objects_path=Objects path +config.lfs_config=LFS Beállítások +config.lfs.storage=Tárhely +config.lfs.objects_path=Objektumok elérési útvonala config.log_config=Naplózás beállítása config.log_file_root_path=Naplófájl gyökérútvonal @@ -1385,9 +1393,9 @@ delete_branch=törölt egy ágat %[2]s ekkor: %[3]s push_tag=feltöltött egy cimkét: %[2]s ide: %[3]s delete_tag=törölt egy cimkét %[2]s ekkor: %[3]s fork_repo=lemásolta a(z) %s tárolót -mirror_sync_push=synced commits to %[3]s at %[4]s from mirror -mirror_sync_create=synced new reference %[2]s to %[3]s from mirror -mirror_sync_delete=synced and deleted reference %[2]s at %[3]s from mirror +mirror_sync_push=commitok szinkronizálva a %[3]s ágba a %[4]s tárolóban, tükörről +mirror_sync_create=új hivatkozás szinkronizálva: %[2]s a %[3]s tárolóban, tükörről +mirror_sync_delete=szinkronizálva és törölve a %[2]s hivatkozás a %[3]s tárolóból, tükörről [tool] ago= @@ -1409,7 +1417,7 @@ months=%d hónapja %s years=%d éve %s raw_seconds=másodperc raw_minutes=perc -raw_hours=hours +raw_hours=órák [dropzone] default_message=Húzz ide fájlokat vagy kattints a feltöltéshez. diff --git a/conf/locale/locale_id-ID.ini b/conf/locale/locale_id-ID.ini index ff705a874..df81d7bbb 100644 --- a/conf/locale/locale_id-ID.ini +++ b/conf/locale/locale_id-ID.ini @@ -51,13 +51,14 @@ internal_server_error=Internal Server Error install=Instalasi title=Langkah-langkah untuk Menjalankan Pertama Kali docker_helper=Jika Anda menjalankan Gogs dalam Docker, silakan baca Petunjuk dengan hati-hati sebelum Anda mengubah sesuatu di Halaman ini! -requite_db_desc=Gogs memerlukan MySQL, PostgreSQL, SQLite3, MSSQL atau TiDB. +requite_db_desc=Gogs requires MySQL, PostgreSQL, SQLite3 or TiDB (via MySQL protocol). db_title=Pengaturan Basisdata db_type=Tipe Basisdata host=Host user=Pengguna password=Sandi db_name=Nama Basisdata +db_schema=Schema db_helper=Harap menggunakan INNODB engine dengan charset utf8_general_ci untuk MySQL. ssl_mode=Mode SSL path=Path @@ -399,7 +400,9 @@ owner=Pemilik repo_name=Nama Repositori repo_name_helper=Nama repositori yang baik biasanya terdiri dari kata kunci yang pendek, mudah diingat dan unik. visibility=Visibilitas +unlisted=Unlisted visiblity_helper=Repositori ini Pribadi +unlisted_helper=This repository is Unlisted visiblity_helper_forced=Situs admin telah memaksa semua repositori baru menjadi Pribadi visiblity_fork_helper=(Perubahan nilai ini akan mempengaruhi semua garpu) clone_helper=Butuh bantuan kloning? Kunjungi Bantuan! @@ -440,6 +443,7 @@ migrate.clone_address_desc=Ini bisa berupa HTTP/HTTPS/GIT URL. migrate.clone_address_desc_import_local=Anda juga diizinkan untuk memindahkan repositori dengan jalur server lokal. migrate.permission_denied=Anda tidak diperbolehkan mengimpor repositori lokal. migrate.invalid_local_path=Jalur lokal tidak valid, tidak ada atau tidaknya sebuah direktori. +migrate.clone_address_resolved_to_blocked_local_address=Clone address resolved to a local network address that is implicitly blocked. migrate.failed=Migrasi gagal: %v mirror_from=cermin dari @@ -806,7 +810,7 @@ settings.webhook.headers=Header settings.webhook.payload=Payload settings.webhook.body=Tubuh settings.webhook.err_cannot_parse_payload_url=Cannot parse payload URL: %v -settings.webhook.err_cannot_use_local_addresses=Non admins are not allowed to use local addresses. +settings.webhook.url_resolved_to_blocked_local_address=Payload URL resolved to a local network address that is implicitly blocked. settings.githooks_desc=Git Hooks didukung oleh Git itu sendiri, Anda dapat mengedit file kait yang didukung dalam daftar di bawah untuk melakukan operasi kustom. settings.githook_edit_desc=Jika hook tidak aktif, konten sampel akan disajikan. Meninggalkan konten ke nilai kosong akan menonaktifkan hook ini. settings.githook_name=Nama Hook @@ -1202,6 +1206,7 @@ config.ssh.start_builtin_server=Start builtin server config.ssh.listen_host=Listen host config.ssh.listen_port=Listen port config.ssh.server_ciphers=Server ciphers +config.ssh.server_macs=Server MACs config.repo_config=Konfigurasi Repositori config.repo.root_path=Root path @@ -1226,6 +1231,8 @@ config.db_config=Konfigurasi Basis Data config.db.type=Type config.db.host=Host config.db.name=Name +config.db.schema=Schema +config.db.schema_helper=(for "postgres" only) config.db.user=User config.db.ssl_mode=SSL mode config.db.ssl_mode_helper=(for "postgres" only) @@ -1242,6 +1249,7 @@ config.security.cookie_secure=Enable secure cookie config.security.reverse_proxy_auth_user=Reverse proxy authentication header config.security.enable_login_status_cookie=Enable login status cookie config.security.login_status_cookie_name=Login status cookie +config.security.local_network_allowlist=Local network allowlist config.email_config=Email configuration config.email.enabled=Enabled diff --git a/conf/locale/locale_it-IT.ini b/conf/locale/locale_it-IT.ini index 1785fc39c..f5e9ed993 100644 --- a/conf/locale/locale_it-IT.ini +++ b/conf/locale/locale_it-IT.ini @@ -44,20 +44,21 @@ issues=Problemi cancel=Annulla [status] -page_not_found=Page Not Found -internal_server_error=Internal Server Error +page_not_found=Pagina Non Trovata +internal_server_error=Errore Interno del Server [install] install=Installazione title=Passi d'installazione per il primo avvio docker_helper=Se stai utilizzando Gogs su Docker, per favore leggi le Linee guida con attenzione prima di cambiare qualcosa su questa pagina! -requite_db_desc=Gogs richiede MySQL, PostgreSQL, SQLite3, MSSQL o TiDB. +requite_db_desc=Gogs requires MySQL, PostgreSQL, SQLite3 or TiDB (via MySQL protocol). db_title=Impostazioni Database db_type=Tipo di database host=Host user=Utente password=Password db_name=Nome del database +db_schema=Schema db_helper=Utilizza il motore INNODB con codifica utf8_general_ci per MySQL. ssl_mode=Modalità SSL path=Percorso @@ -125,7 +126,7 @@ run_user_not_match=Run user non è l'utente corrente: %s -> %s smtp_host_missing_port=All'Host SMTP manca la porta nell'indirizzo. invalid_smtp_from=Campo SMTP From non valido: %v save_config_failed=Fallito il salvataggio della configurazione: %v -init_failed=Failed to initialize application: %v +init_failed=Impossibile inizializzare l'applicazione: %v invalid_admin_setting=Impostazioni account Admin non valide: %v install_success=Benvenuto! Siamo felici che tu abbia scelto Gogs, buon divertimento. invalid_log_root_path=Percorso deilog non valido: %v @@ -263,7 +264,7 @@ following=Seguiti follow=Segui unfollow=Non seguire più -form.name_not_allowed=User name or pattern %q is not allowed. +form.name_not_allowed=Nome utente o schema %q non consentito. [settings] profile=Profilo @@ -377,7 +378,7 @@ delete_token=Elimina access_token_deletion=Eliminazione Token di accesso personale access_token_deletion_desc=Eliminare questo token di accesso personale rimuoverà tutti i relativi accessi di applicazione. Si desidera continuare? delete_token_success=Il token di accesso personale è stato eliminato! Non dimenticare di aggiornare anche l'applicazione. -token_name_exists=Token with same name already exists. +token_name_exists=Un token con lo stesso nome esiste già. orgs.none=Non sei membro di alcuna organizzazione. orgs.leave_title=Abbandona una organizzazione @@ -399,7 +400,9 @@ owner=Proprietario repo_name=Nome Repository repo_name_helper=I migliori nomi dei repository sono brevi, facili da memorizzare e univoci. visibility=Visibilità +unlisted=Unlisted visiblity_helper=Questo repository è privato +unlisted_helper=This repository is Unlisted visiblity_helper_forced=L'amministratore del sito ha deciso che tutti i nuovi repository devono essere privati visiblity_fork_helper=(La modifica di questo valore avrà effetto su tutti i fork) clone_helper=Hai bisogno di aiuto per la clonazione? Visita Aiuto! @@ -417,7 +420,7 @@ auto_init=Inizializzare questo repository con i file e il modello selezionati create_repo=Crea Repository default_branch=Ramo (Branch) predefinito mirror_prune=Rimuovi -mirror_prune_desc=Remove any remote-tracking references that no longer exist on the remote +mirror_prune_desc=Rimuovi ogni riferimento di monitoraggio remoto che non esiste più sul telecomando mirror_interval=Intervallo Mirror (in ore) mirror_address=Indirizzo del mirror mirror_address_desc=Si prega di includere nell'indirizzo le credenziali utente necessarie. @@ -425,11 +428,11 @@ mirror_last_synced=Ultimo aggiornamento watchers=Osservatori stargazers=Fan forks=Fork -repo_description_helper=Description of repository. Maximum 512 characters length. +repo_description_helper=Descrizione della repository. Lunghezza massima di 512 caratteri. repo_description_length=Caratteri disponibili form.reach_limit_of_creation=Il proprietario ha raggiunto il limite massimo di %d repository creati. -form.name_not_allowed=Repository name or pattern %q is not allowed. +form.name_not_allowed=Nome della repository o schema %q non consentiti. need_auth=Richiesta di autorizzazione migrate_type=Tipo di migrazione @@ -440,6 +443,7 @@ migrate.clone_address_desc=Può essere un url HTTP/HTTPS/GIT. migrate.clone_address_desc_import_local=Puoi anche migrare un repository usando un path locale sul server. migrate.permission_denied=Non è consentito importare repository locali. migrate.invalid_local_path=Percorso locale non valido, non esiste o non è una cartella. +migrate.clone_address_resolved_to_blocked_local_address=Clone address resolved to a local network address that is implicitly blocked. migrate.failed=Migrazione non riuscita: %v mirror_from=mirror da @@ -806,7 +810,7 @@ settings.webhook.headers=Headers settings.webhook.payload=Payload settings.webhook.body=Body settings.webhook.err_cannot_parse_payload_url=Cannot parse payload URL: %v -settings.webhook.err_cannot_use_local_addresses=Non admins are not allowed to use local addresses. +settings.webhook.url_resolved_to_blocked_local_address=Payload URL resolved to a local network address that is implicitly blocked. settings.githooks_desc=Gli Hooks di Git sono una funzionalità di Git stesso, puoi modificare i file degli hooks supportati nell'elenco qui sotto per compiere azioni personalizzate. settings.githook_edit_desc=Se l'hook è inattivo, sarà presentato un contenuto esempio. Lasciando il contenuto vuoto disattiverai questo hook. settings.githook_name=Nome hook @@ -1183,7 +1187,7 @@ config.server.unix_socket_permission=Unix socket permission config.server.local_root_url=Local root URL config.server.offline_mode=Offline mode config.server.disable_router_log=Disable router log -config.server.enable_gzip=Enable Gzip +config.server.enable_gzip=Abilita Gzip config.server.app_data_path=Application data path config.server.load_assets_from_disk=Load assets from disk config.server.landing_url=Landing URL @@ -1202,6 +1206,7 @@ config.ssh.start_builtin_server=Start builtin server config.ssh.listen_host=Listen host config.ssh.listen_port=Listen port config.ssh.server_ciphers=Server ciphers +config.ssh.server_macs=Server MACs config.repo_config=Configurazione Repository config.repo.root_path=Root path @@ -1223,14 +1228,16 @@ config.repo.upload.file_max_size=Upload file size limit config.repo.upload.max_files=Upload files limit config.db_config=Configurazione Database -config.db.type=Type +config.db.type=Tipo config.db.host=Host -config.db.name=Name -config.db.user=User -config.db.ssl_mode=SSL mode -config.db.ssl_mode_helper=(for "postgres" only) -config.db.path=Path -config.db.path_helper=(for "sqlite3"only) +config.db.name=Nome +config.db.schema=Schema +config.db.schema_helper=(for "postgres" only) +config.db.user=Utente +config.db.ssl_mode=modalità SSL +config.db.ssl_mode_helper=(solo per "postgres") +config.db.path=Percorso +config.db.path_helper=(solo per "sqlite3") config.db.max_open_conns=Maximum open connections config.db.max_idle_conns=Maximum idle connections @@ -1242,22 +1249,23 @@ config.security.cookie_secure=Enable secure cookie config.security.reverse_proxy_auth_user=Reverse proxy authentication header config.security.enable_login_status_cookie=Enable login status cookie config.security.login_status_cookie_name=Login status cookie +config.security.local_network_allowlist=Local network allowlist config.email_config=Email configuration config.email.enabled=Enabled config.email.subject_prefix=Subject prefix config.email.host=Host -config.email.from=From -config.email.user=User -config.email.disable_helo=Disable HELO +config.email.from=Da +config.email.user=Utente +config.email.disable_helo=Disattiva HELO config.email.helo_hostname=HELO hostname config.email.skip_verify=Skip certificate verify config.email.use_certificate=Use custom certificate -config.email.cert_file=Certificate file +config.email.cert_file=File certificato config.email.key_file=Key file -config.email.use_plain_text=Use plain text +config.email.use_plain_text=Usa testo semplice config.email.add_plain_text_alt=Add plain text alternative -config.email.send_test_mail=Send test email +config.email.send_test_mail=Invia email di test config.email.test_mail_failed=Failed to send test email to '%s': %v config.email.test_mail_sent=Test email has been sent to '%s'. @@ -1279,22 +1287,22 @@ config.session_config=Configurazione Sessione config.session.provider=Provider config.session.provider_config=Provider config config.session.cookie_name=Cookie -config.session.https_only=HTTPS only +config.session.https_only=Solo HTTPS config.session.gc_interval=GC interval config.session.max_life_time=Max life time -config.session.csrf_cookie_name=CSRF cookie +config.session.csrf_cookie_name=Cookie CSRF config.cache_config=Configurazione Cache -config.cache.adapter=Adapter -config.cache.interval=GC interval +config.cache.adapter=Adattatore +config.cache.interval=Intervallo GC config.cache.host=Host config.http_config=Configurazione HTTP config.http.access_control_allow_origin=Access control allow origin config.attachment_config=Attachment configuration -config.attachment.enabled=Enabled -config.attachment.path=Path +config.attachment.enabled=Attivo +config.attachment.path=Percorso config.attachment.allowed_types=Allowed types config.attachment.max_size=Size limit config.attachment.max_files=Files limit @@ -1409,7 +1417,7 @@ months=%d mesi %s years=%d anni %s raw_seconds=secondi raw_minutes=minuti -raw_hours=hours +raw_hours=ore [dropzone] default_message=Trascina i file qui o clicca per caricare. diff --git a/conf/locale/locale_ja-JP.ini b/conf/locale/locale_ja-JP.ini index e997242d6..9cfb942b8 100644 --- a/conf/locale/locale_ja-JP.ini +++ b/conf/locale/locale_ja-JP.ini @@ -44,20 +44,21 @@ issues=課題 cancel=キャンセル [status] -page_not_found=Page Not Found -internal_server_error=Internal Server Error +page_not_found=ページが見つかりません +internal_server_error=サーバ内部エラー [install] install=インストール title=インストールをする前に必要な準備をしましょう docker_helper=DockerでGogsを稼動する場合は、このページに変更を加える前に、 ガイドラインをよく読んでください！ -requite_db_desc=Gogs は、MySQL、PostgreSQL、SQLite3 または TiDB が必要です。 +requite_db_desc=Gogs requires MySQL, PostgreSQL, SQLite3 or TiDB (via MySQL protocol). db_title=データベース設定 db_type=データベースの種類 host=ホスト user=ユーザー password=パスワード db_name=データベース名 +db_schema=Schema db_helper=MySQLではエンジンがINNODB、文字セットがutf8_general_ciである必要があります。 ssl_mode=SSL モード path=パス @@ -399,7 +400,9 @@ owner=オーナー repo_name=リポジトリ名 repo_name_helper=短くて分かりやすく重複しないリポジトリ名を決めてください。 visibility=公開/非公開 +unlisted=Unlisted visiblity_helper=このリポジトリは非公開です +unlisted_helper=This repository is Unlisted visiblity_helper_forced=サイト管理者が、すべての新しいリポジトリを非公開にすることを強制しています visiblity_fork_helper=(この値の変更はすべてのフォークに適用されます) clone_helper=クローンに関してお困りであれば ヘルプ を参照しましょう。 @@ -440,6 +443,7 @@ migrate.clone_address_desc=HTTP/HTTPS/GIT URLを設定できます。 migrate.clone_address_desc_import_local=ローカルサーバーのパスでリポジトリを移行することもできます。 migrate.permission_denied=ローカル リポジトリをインポートすることはできません。 migrate.invalid_local_path=ローカルパスが無効です。存在しないかディレクトリではありません。 +migrate.clone_address_resolved_to_blocked_local_address=Clone address resolved to a local network address that is implicitly blocked. migrate.failed=移行に失敗しました: %v mirror_from=同期ミラー @@ -806,7 +810,7 @@ settings.webhook.headers=ヘッダ settings.webhook.payload=ペイロード settings.webhook.body=ボディ settings.webhook.err_cannot_parse_payload_url=Cannot parse payload URL: %v -settings.webhook.err_cannot_use_local_addresses=Non admins are not allowed to use local addresses. +settings.webhook.url_resolved_to_blocked_local_address=Payload URL resolved to a local network address that is implicitly blocked. settings.githooks_desc=Git のフックは Git 自体によって提供されています。以下のリストのファイルを編集して、サポートされているフックのカスタム操作を適用することができます。 settings.githook_edit_desc=もしフックがアクティブではない場合は、サンプルコンテンツが表示されます。コンテンツを空白にするにはこのフックを無効にします。 settings.githook_name=フックの名前 @@ -934,7 +938,7 @@ team_desc_helper=このチームに関する全ての情報は？ team_permission_desc=このチームに必要な権限レベルは？ form.name_not_allowed=Organization name or pattern %q is not allowed. -form.team_name_not_allowed=Team name or pattern %q is not allowed. +form.team_name_not_allowed=チーム名またはパターン %q は許可されていません。 settings=設定 settings.options=オプション @@ -1010,7 +1014,7 @@ dashboard.build_info=ビルド情報 dashboard.app_ver=アプリケーションのバージョン dashboard.git_version=Git バージョン dashboard.go_version=Go バージョン -dashboard.build_time=Build time +dashboard.build_time=ビルド日時 dashboard.build_commit=Build commit dashboard.statistic=統計 dashboard.operations=操作 @@ -1018,7 +1022,7 @@ dashboard.system_status=システム モニターのステータス dashboard.statistic_info=Gogs データベースは %d 人のユーザー、%d 個の組織、%d 個の公開鍵、%d 個のリポジトリ、%d 個のウォッチ、%d 個のスター、%d 回のアクション、%d 回のアクセス、%d 個の課題、%d 個のコメント、%d 個のソーシャルアカウント、%d 個のフォロー、%d 個のミラー、%d 個のリリース、%d 個のログイン元、%d 個のwebフック、%d 個のマイルストーン、%d 個のラベル、%d 個のフックタスク、%d 個のチーム、%d 更新タスク、%d 個の添付ファイルの情報を保持しています。 dashboard.operation_name=操作の名前 dashboard.operation_switch=スイッチ -dashboard.select_operation_to_run=Please select operation to run +dashboard.select_operation_to_run=操作を選択してください dashboard.operation_run=実行 dashboard.clean_unbind_oauth=結び付けられていない OAuth をクリーン dashboard.clean_unbind_oauth_success=結び付けられていない全ての OAuth を正常に削除しました。 @@ -1180,11 +1184,11 @@ config.server.cert_file=証明書ファイル config.server.key_file=キーファイル config.server.tls_min_version=最小TLSバージョン config.server.unix_socket_permission=Unixソケットの権限 -config.server.local_root_url=Local root URL +config.server.local_root_url=ローカル ルート URL config.server.offline_mode=オフラインモード config.server.disable_router_log=ルーターログを無効にする config.server.enable_gzip=Gzip を有効化 -config.server.app_data_path=Application data path +config.server.app_data_path=アプリケーション データ パス config.server.load_assets_from_disk=Load assets from disk config.server.landing_url=Landing URL @@ -1193,8 +1197,8 @@ config.ssh.enabled=Enabled config.ssh.domain=Exposed domain config.ssh.port=Exposed port config.ssh.root_path=Root path -config.ssh.keygen_path=Keygen path -config.ssh.key_test_path=Key test path +config.ssh.keygen_path=Keygen パス +config.ssh.key_test_path=鍵テストパス config.ssh.minimum_key_size_check=最小キーサイズチェック config.ssh.minimum_key_sizes=最小キーサイズ config.ssh.rewrite_authorized_keys_at_start=Rewrite "authorized_keys" at start @@ -1202,11 +1206,12 @@ config.ssh.start_builtin_server=内蔵サーバーを起動 config.ssh.listen_host=待受ホスト config.ssh.listen_port=待受ポート config.ssh.server_ciphers=Server ciphers +config.ssh.server_macs=Server MACs config.repo_config=リポジトリの設定 config.repo.root_path=Root path config.repo.script_type=Script type -config.repo.ansi_chatset=ANSI charset +config.repo.ansi_chatset=ANSI 文字コード config.repo.force_private=非公開にする config.repo.max_creation_limit=最大作成数 config.repo.preferred_licenses=Preferred licenses @@ -1223,13 +1228,15 @@ config.repo.upload.file_max_size=Upload file size limit config.repo.upload.max_files=Upload files limit config.db_config=データベース設定 -config.db.type=Type -config.db.host=Host -config.db.name=Name -config.db.user=User +config.db.type=DB種類 +config.db.host=DBホスト +config.db.name=DB名 +config.db.schema=Schema +config.db.schema_helper=(for "postgres" only) +config.db.user=DBユーザー config.db.ssl_mode=SSL モード config.db.ssl_mode_helper=("postgres"のみ) -config.db.path=Path +config.db.path=DBパス config.db.path_helper=("sqlite3"のみ) config.db.max_open_conns=Maximum open connections config.db.max_idle_conns=Maximum idle connections @@ -1242,20 +1249,21 @@ config.security.cookie_secure=セキュアなクッキーを有効にする config.security.reverse_proxy_auth_user=Reverse proxy authentication header config.security.enable_login_status_cookie=Enable login status cookie config.security.login_status_cookie_name=Login status cookie +config.security.local_network_allowlist=Local network allowlist config.email_config=Email configuration config.email.enabled=Enabled config.email.subject_prefix=Subject prefix -config.email.host=Host +config.email.host=ホスト config.email.from=From -config.email.user=User -config.email.disable_helo=Disable HELO +config.email.user=ユーザー +config.email.disable_helo=HELOを無効にする config.email.helo_hostname=HELO hostname config.email.skip_verify=Skip certificate verify config.email.use_certificate=Use custom certificate config.email.cert_file=Certificate file config.email.key_file=Key file -config.email.use_plain_text=Use plain text +config.email.use_plain_text=プレーンテキストを使用する config.email.add_plain_text_alt=Add plain text alternative config.email.send_test_mail=Send test email config.email.test_mail_failed=Failed to send test email to '%s': %v @@ -1266,14 +1274,14 @@ config.auth.activate_code_lives=Activate code lives config.auth.reset_password_code_lives=Reset password code lives config.auth.require_email_confirm=Require email confirmation config.auth.require_sign_in_view=Require sign in view -config.auth.disable_registration=Disable registration -config.auth.enable_registration_captcha=Enable registration captcha -config.auth.enable_reverse_proxy_authentication=Enable reverse proxy authentication -config.auth.enable_reverse_proxy_auto_registration=Enable reverse proxy auto registration -config.auth.reverse_proxy_authentication_header=Reverse proxy authentication header +config.auth.disable_registration=登録を無効にする +config.auth.enable_registration_captcha=登録時のCAPTCHAを有効にする +config.auth.enable_reverse_proxy_authentication=リバースプロキシ認証を有効にする +config.auth.enable_reverse_proxy_auto_registration=リバースプロキシの自動登録を有効にする +config.auth.reverse_proxy_authentication_header=リバースプロキシ認証ヘッダー -config.user_config=User configuration -config.user.enable_email_notify=Enable email notification +config.user_config=ユーザー設定 +config.user.enable_email_notify=メール通知を有効にする config.session_config=セッションの設定 config.session.provider=Provider @@ -1287,28 +1295,28 @@ config.session.csrf_cookie_name=CSRF cookie config.cache_config=キャッシュの設定 config.cache.adapter=Adapter config.cache.interval=GC 間隔 -config.cache.host=Host +config.cache.host=ホスト config.http_config=HTTP の設定 config.http.access_control_allow_origin=Access control allow origin config.attachment_config=Attachment configuration config.attachment.enabled=Enabled -config.attachment.path=Path +config.attachment.path=パス config.attachment.allowed_types=Allowed types config.attachment.max_size=サイズ制限 config.attachment.max_files=ファイルの制限 config.release_config=リリースの構成 -config.release.attachment.enabled=Attachment enabled -config.release.attachment.allowed_types=Attachment allowed types +config.release.attachment.enabled=添付ファイルが有効になっています +config.release.attachment.allowed_types=添付ファイルで許可されるタイプ config.release.attachment.max_size=添付ファイルのサイズ制限 -config.release.attachment.max_files=Attachment files limit +config.release.attachment.max_files=添付ファイルのサイズ制限 config.picture_config=画像の設定 config.picture.avatar_upload_path=User avatar upload path config.picture.repo_avatar_upload_path=Repository avatar upload path -config.picture.gravatar_source=Gravatar source +config.picture.gravatar_source=Gravatarのソース config.picture.disable_gravatar=Gravatarを無効にする config.picture.enable_federated_avatar=Enable federated avatars @@ -1317,23 +1325,23 @@ config.mirror.default_interval=Default interval config.webhook_config=Webhook設定 config.webhook.types=Types -config.webhook.deliver_timeout=Deliver timeout -config.webhook.skip_tls_verify=Skip TLS verify +config.webhook.deliver_timeout=配信のタイムアウト +config.webhook.skip_tls_verify=TLS検証をスキップ config.git_config=Git 設定 -config.git.disable_diff_highlight=Disable diff syntax highlight +config.git.disable_diff_highlight=Diff のシンタックスハイライトを無効にする config.git.max_diff_lines=Diff lines limit (for a single file) -config.git.max_diff_line_characters=Diff characters limit (for a single line) +config.git.max_diff_line_characters=Diff の最大文字数（１行あたり） config.git.max_diff_files=Diff files limit (for a single diff) config.git.gc_args=GC の引数 config.git.migrate_timeout=Migration timeout config.git.mirror_timeout=Mirror fetch timeout -config.git.clone_timeout=Clone timeout +config.git.clone_timeout=クローンのタイムアウト config.git.pull_timeout=Pull タイムアウト -config.git.gc_timeout=GC timeout +config.git.gc_timeout=GC タイムアウト -config.lfs_config=LFS configuration -config.lfs.storage=Storage +config.lfs_config=LFS設定 +config.lfs.storage=ストレージ config.lfs.objects_path=Objects path config.log_config=ログの設定 @@ -1409,7 +1417,7 @@ months=%d ヶ月 %s years=%d 年 %s raw_seconds=秒 raw_minutes=分 -raw_hours=hours +raw_hours=時間 [dropzone] default_message=ここにファイルをドロップまたはクリックしてアップロードします。 diff --git a/conf/locale/locale_ko-KR.ini b/conf/locale/locale_ko-KR.ini index 803cb2576..008580c65 100644 --- a/conf/locale/locale_ko-KR.ini +++ b/conf/locale/locale_ko-KR.ini @@ -51,13 +51,14 @@ internal_server_error=Internal Server Error install=설치 title=첫 실행을 위한 설치단계 docker_helper=Gogs를 Docker에서 운영하고 있다면 안내를 읽고 변경해 주세요! -requite_db_desc=Gogs 는 MySQL, PostgreSQL, SQLite3, MSSQL 또는 TiDB 를 필요로 합니다. +requite_db_desc=Gogs requires MySQL, PostgreSQL, SQLite3 or TiDB (via MySQL protocol). db_title=데이터베이스 설정 db_type=데이터베이스 유형 host=호스트 user=사용자 password=비밀번호 db_name=데이터베이스 이름 +db_schema=Schema db_helper=MySQL에서는 utf8_general_ci 캐릭터셋으로 INNODB엔진을 이용해 주세요 ssl_mode=SSL 모드 path=경로 @@ -399,7 +400,9 @@ owner=소유자 repo_name=저장소 이름 repo_name_helper=좋은 저장소 이름은 짧고 기억하기 좋은 유니크한 키워드로 이루어 집니다. visibility=가시성 +unlisted=Unlisted visiblity_helper=이 저장소는 비공개 저장소입니다 +unlisted_helper=This repository is Unlisted visiblity_helper_forced=사이트 관리자가 모든 저장소를 비공개로 변경하였습니다. visiblity_fork_helper=(이 값의 변경은 모든 포크에 영향을 줍니다) clone_helper=클론하는데에 도움이 필요하면 Help에 방문하세요. @@ -440,6 +443,7 @@ migrate.clone_address_desc=HTTP/HTTPS/GIT URL일 수 있습니다. migrate.clone_address_desc_import_local=로컬 서버 경로를 기준으로 저장소를 마이그레이션 할 수도 있습니다. migrate.permission_denied=로컬 저장소는 가져오기를 할 수 없습니다. migrate.invalid_local_path=잘못된 로컬 경로입니다. 존재하지 않는 경로거나 폴더가 아닙니다. +migrate.clone_address_resolved_to_blocked_local_address=Clone address resolved to a local network address that is implicitly blocked. migrate.failed=마이그레이션 실패: %v mirror_from=의 미러 @@ -807,7 +811,7 @@ settings.webhook.headers=제목 settings.webhook.payload=페이로드 settings.webhook.body=본문 settings.webhook.err_cannot_parse_payload_url=Cannot parse payload URL: %v -settings.webhook.err_cannot_use_local_addresses=Non admins are not allowed to use local addresses. +settings.webhook.url_resolved_to_blocked_local_address=Payload URL resolved to a local network address that is implicitly blocked. settings.githooks_desc=Git Hooks는 Git 자체에서 제공되며, 아래 목록에서 지원되는 후크 파일을 편집하여 사용자 정의 작업을 수행 할 수 있습니다. settings.githook_edit_desc=후크가 비활성인 경우 샘플 콘텐츠가 표시됩니다. 내용을 빈 값으로 두면 이 훅은 비활성화됩니다. settings.githook_name=Hook 이름 @@ -1203,6 +1207,7 @@ config.ssh.start_builtin_server=빌트인 서버 시작 config.ssh.listen_host=수신 대기 호스트 config.ssh.listen_port=수신 대기 포트 config.ssh.server_ciphers=서버 암호화 +config.ssh.server_macs=Server MACs config.repo_config=저장소 설정 config.repo.root_path=최상위 경로 @@ -1227,6 +1232,8 @@ config.db_config=데이터베이스 설정 config.db.type=유형 config.db.host=호스트 config.db.name=이름 +config.db.schema=Schema +config.db.schema_helper=(for "postgres" only) config.db.user=사용자 config.db.ssl_mode=SSL 모드 config.db.ssl_mode_helper=("postgres" 전용) @@ -1243,6 +1250,7 @@ config.security.cookie_secure=보안 쿠키 활성화 config.security.reverse_proxy_auth_user=Reverse proxy authentication header config.security.enable_login_status_cookie=로그인 상태 쿠키 활성화 config.security.login_status_cookie_name=로그인 상태 쿠키 +config.security.local_network_allowlist=Local network allowlist config.email_config=이메일 설정 config.email.enabled=활성화됨 diff --git a/conf/locale/locale_lv-LV.ini b/conf/locale/locale_lv-LV.ini index f023e8e60..7e5f861f5 100644 --- a/conf/locale/locale_lv-LV.ini +++ b/conf/locale/locale_lv-LV.ini @@ -51,13 +51,14 @@ internal_server_error=Internal Server Error install=Instalācija title=Instalācijas soļi pirmo reizi palaižot docker_helper=Ja Gogs tiek lietots zem Docker, izlasiet uzmanīgi vadlīnijas, pirms ko maināt šajā lapā! -requite_db_desc=Gogs ir nepieciešams MySQL, PostgreSQL, SQLite3, MSSQL vai TiDB. +requite_db_desc=Gogs requires MySQL, PostgreSQL, SQLite3 or TiDB (via MySQL protocol). db_title=Datu bāzes iestatījumi db_type=Datu bāzes veids host=Resursdators user=Lietotājs password=Parole db_name=Datu bāzes nosaukums +db_schema=Schema db_helper=Nepieciešams izmantot MySQL INNODB dzini ar rakstzīmju kopu utf8_general_ci. ssl_mode=SSL režīms path=Ceļš @@ -399,7 +400,9 @@ owner=Īpašnieks repo_name=Repozitorija nosaukums repo_name_helper=Labi repzotoriju nosaukumi ir īsi, tādi kurus viegli atcerēties un unikāli. visibility=Redzamība +unlisted=Unlisted visiblity_helper=Šis repozitorijs ir privāts +unlisted_helper=This repository is Unlisted visiblity_helper_forced=Lapas administrators ir noteicis, ka visiem repozitorijiem ir jābūt privātiem visiblity_fork_helper=(Šīs vērtības maiņa ietekmēs arī visus atdalītos repozitorijus) clone_helper=Nepieciešama palīdzība kā veikt klonēšana? Apmeklējiet Palīdzība lapu! @@ -440,6 +443,7 @@ migrate.clone_address_desc=Tas var būt HTTP/HTTPS/GIT URL. migrate.clone_address_desc_import_local=You're also allowed to migrate a repository by local server path. migrate.permission_denied=Jums nav tiesību importēt lokālu repozitoriju. migrate.invalid_local_path=Nekorents lokālais ceļš, tas neeksistē vai nav direktorijs. +migrate.clone_address_resolved_to_blocked_local_address=Clone address resolved to a local network address that is implicitly blocked. migrate.failed=Migrācija neizdevās: %v mirror_from=spogulis no @@ -806,7 +810,7 @@ settings.webhook.headers=Galvenes settings.webhook.payload=Derīgā krava settings.webhook.body=Saturs settings.webhook.err_cannot_parse_payload_url=Cannot parse payload URL: %v -settings.webhook.err_cannot_use_local_addresses=Non admins are not allowed to use local addresses. +settings.webhook.url_resolved_to_blocked_local_address=Payload URL resolved to a local network address that is implicitly blocked. settings.githooks_desc=Git āķus apstrādā pats Git. Jūs varat labot atbalsīto āku failus sarakstā zemāk, lai veiktu pielāgotas darbības. settings.githook_edit_desc=Ja āķis nav aktīvs, tiks attēlots piemērs kā to izmantot. Atstājot āķa saturu tukšu, tas tiks atspējots. settings.githook_name=Āķa nosaukums @@ -1202,6 +1206,7 @@ config.ssh.start_builtin_server=Start builtin server config.ssh.listen_host=Listen host config.ssh.listen_port=Listen port config.ssh.server_ciphers=Server ciphers +config.ssh.server_macs=Server MACs config.repo_config=Repozitorija konfigurācija config.repo.root_path=Root path @@ -1226,6 +1231,8 @@ config.db_config=Datu bāzes konfigurācija config.db.type=Type config.db.host=Host config.db.name=Name +config.db.schema=Schema +config.db.schema_helper=(for "postgres" only) config.db.user=User config.db.ssl_mode=SSL mode config.db.ssl_mode_helper=(for "postgres" only) @@ -1242,6 +1249,7 @@ config.security.cookie_secure=Enable secure cookie config.security.reverse_proxy_auth_user=Reverse proxy authentication header config.security.enable_login_status_cookie=Enable login status cookie config.security.login_status_cookie_name=Login status cookie +config.security.local_network_allowlist=Local network allowlist config.email_config=Email configuration config.email.enabled=Enabled diff --git a/conf/locale/locale_nl-NL.ini b/conf/locale/locale_nl-NL.ini index d3e5bec68..932deed2a 100644 --- a/conf/locale/locale_nl-NL.ini +++ b/conf/locale/locale_nl-NL.ini @@ -51,13 +51,14 @@ internal_server_error=Internal Server Error install=Installatie title=Installatiestappen voor de eerste keer opstarten docker_helper=Als u gebruik maakt Gogs binnen Docker, lees dan de richtlijnen voordat u iets veranderen op deze pagina! -requite_db_desc=Gogs vereist MySQL, PostgreSQL, SQLite3, MSSQL of TiDB. +requite_db_desc=Gogs requires MySQL, PostgreSQL, SQLite3 or TiDB (via MySQL protocol). db_title=Database-instellingen db_type=Database-type host=Host user=Gebruikersnaam password=Wachtwoord db_name=Databasenaam +db_schema=Schema db_helper=Gebruik InnoDB engine met utf8_general_ci karakterset voor MySQL. ssl_mode=SSL-modus path=Pad @@ -399,7 +400,9 @@ owner=Eigenaar repo_name=Naam van repository repo_name_helper=Een goede repository-naam is kort, makkelijk te onthouden en uniek. visibility=Zichtbaarheid +unlisted=Unlisted visiblity_helper=Deze repositorie is privaat +unlisted_helper=This repository is Unlisted visiblity_helper_forced=Sitebeheerder heeft alle nieuwe repositories gedwongen privé te zijn visiblity_fork_helper=(Verandering van deze waarde zal van invloed zijn op alle forks) clone_helper=De behoeftehulp van klonen? Bezoek helpen! @@ -440,6 +443,7 @@ migrate.clone_address_desc=Dit kan een HTTP/HTTPS/GIT URL zijn. migrate.clone_address_desc_import_local=You're also allowed to migrate a repository by local server path. migrate.permission_denied=U bent niet toegestaan om deze lokale repositories te importeren. migrate.invalid_local_path=Ongeldig lokaal pad, het pad bestaat niet of het is geen map. +migrate.clone_address_resolved_to_blocked_local_address=Clone address resolved to a local network address that is implicitly blocked. migrate.failed=Migratie is mislukt: %v mirror_from=spiegel van @@ -806,7 +810,7 @@ settings.webhook.headers=Headers settings.webhook.payload=Lading settings.webhook.body=Inhoud settings.webhook.err_cannot_parse_payload_url=Cannot parse payload URL: %v -settings.webhook.err_cannot_use_local_addresses=Non admins are not allowed to use local addresses. +settings.webhook.url_resolved_to_blocked_local_address=Payload URL resolved to a local network address that is implicitly blocked. settings.githooks_desc=Git haken worden aangedreven door Git zelf, u kunt bestanden van ondersteunde haken in de lijst hieronder om aangepaste acties van toepassing bewerken. settings.githook_edit_desc=Als haak niet actief is, zal monster inhoud worden gepresenteerd. Verlof inhoud leeg zal deze haak uitschakelen. settings.githook_name=Haak naam @@ -1202,6 +1206,7 @@ config.ssh.start_builtin_server=Start builtin server config.ssh.listen_host=Listen host config.ssh.listen_port=Listen port config.ssh.server_ciphers=Server ciphers +config.ssh.server_macs=Server MACs config.repo_config=Repository configuration config.repo.root_path=Root path @@ -1226,6 +1231,8 @@ config.db_config=Databaseconfiguratie config.db.type=Type config.db.host=Host config.db.name=Name +config.db.schema=Schema +config.db.schema_helper=(for "postgres" only) config.db.user=User config.db.ssl_mode=SSL mode config.db.ssl_mode_helper=(for "postgres" only) @@ -1242,6 +1249,7 @@ config.security.cookie_secure=Enable secure cookie config.security.reverse_proxy_auth_user=Reverse proxy authentication header config.security.enable_login_status_cookie=Enable login status cookie config.security.login_status_cookie_name=Login status cookie +config.security.local_network_allowlist=Local network allowlist config.email_config=Email configuration config.email.enabled=Enabled diff --git a/conf/locale/locale_pl-PL.ini b/conf/locale/locale_pl-PL.ini index 3e9585031..d33db7a38 100644 --- a/conf/locale/locale_pl-PL.ini +++ b/conf/locale/locale_pl-PL.ini @@ -44,20 +44,21 @@ issues=Problemy cancel=Anuluj [status] -page_not_found=Page Not Found -internal_server_error=Internal Server Error +page_not_found=Strona nie została znaleziona +internal_server_error=Wewnętrzny błąd serwera [install] install=Instalacja title=Kroki instalacyjne dla pierwszego uruchomienia docker_helper=Jeśli używasz Gogs wewnątrz Dockera, proszę przeczytaj wytyczne, zanim zmienisz coś na tej stronie! -requite_db_desc=Gogs wymaga bazy MySQL, PostgreSQL, SQLite3 lub TiDB. +requite_db_desc=Gogs requires MySQL, PostgreSQL, SQLite3 or TiDB (via MySQL protocol). db_title=Ustawienia bazy danych db_type=Typ bazy danych host=Host user=Użytkownik password=Hasło db_name=Nazwa bazy danych +db_schema=Schema db_helper=Proszę użyć silnika INNODB z kodowaniem utf8_general_ci dla MySQL. ssl_mode=Tryb SSL path=Ścieżka @@ -263,7 +264,7 @@ following=Obserwowani follow=Obserwuj unfollow=Przestań obserwować -form.name_not_allowed=User name or pattern %q is not allowed. +form.name_not_allowed=Nazwa użytkownika lub wzór %q jest niedozwolony. [settings] profile=Profil @@ -399,7 +400,9 @@ owner=Właściciel repo_name=Nazwa repozytorium repo_name_helper=Dobre nazwy repozytorium są krótkie, wpadające w pamięć i unikalne. visibility=Widoczność +unlisted=Unlisted visiblity_helper=To repozytorium jest prywatne +unlisted_helper=This repository is Unlisted visiblity_helper_forced=Administrator systemu wymaga, żeby wszystkie nowe repozytoria były Prywatne visiblity_fork_helper=(Zmiana tej wartości wpłynie na wszystkie forki) clone_helper=Potrzebujesz pomocy z klonowaniem? Odwiedź Pomoc! @@ -429,7 +432,7 @@ repo_description_helper=Opis repozytorium. Maksymalnie 512 znaków. repo_description_length=Dostępne znaki form.reach_limit_of_creation=Właściciel osiągnął limit maksymalnej ilości repozytoriów %d. -form.name_not_allowed=Repository name or pattern %q is not allowed. +form.name_not_allowed=Nazwa repozytorium lub wzór %q jest niedozwolony. need_auth=Wymaga autoryzacji migrate_type=Typ migracji @@ -440,6 +443,7 @@ migrate.clone_address_desc=URL może być adresem HTTP/HTTPS/GIT. migrate.clone_address_desc_import_local=Masz także możliwość migracji repozytorium przez ścieżka serwera lokalnego. migrate.permission_denied=Nie możesz importować lokalnych repozytoriów. migrate.invalid_local_path=Ścieżka jest niepoprawna. Nie istnieje lub nie jest katalogiem. +migrate.clone_address_resolved_to_blocked_local_address=Clone address resolved to a local network address that is implicitly blocked. migrate.failed=Migracja nie powiodła się: %v mirror_from=kopia lustrzana @@ -790,7 +794,7 @@ settings.search_user_placeholder=Szukaj użytkownika... settings.org_not_allowed_to_be_collaborator=Organizacji nie można dodać jako współpracownika. settings.hooks_desc=Webooki działają tak jak proste wywołania HTTP POST. Jeśli cokolwiek zdarzy się w Gogs, wyślemy powiadomienie do wybranego hosta. Więcej informacji można znaleźć w przewodniku webhooków. settings.webhooks.add_new=Add a new webhook: -settings.webhooks.choose_a_type=Choose a type... +settings.webhooks.choose_a_type=Wybierz typ... settings.add_webhook=Dodaj webhooka settings.webhook_deletion=Usuń webhooka settings.webhook_deletion_desc=Usunięcie tego webooka spowoduje usunięcie powiązanych informacji i wpisów w historii. Czy chcesz kontynuować? @@ -806,7 +810,7 @@ settings.webhook.headers=Nagłówki settings.webhook.payload=Zawartość settings.webhook.body=Treść settings.webhook.err_cannot_parse_payload_url=Cannot parse payload URL: %v -settings.webhook.err_cannot_use_local_addresses=Non admins are not allowed to use local addresses. +settings.webhook.url_resolved_to_blocked_local_address=Payload URL resolved to a local network address that is implicitly blocked. settings.githooks_desc=Hooki Git są obsługiwane bezpośrednio przez Git. Pliki obsługiwanych hooków z poniższej listy mogą być edytowane, aby wykonywać niestandardowe operacje. settings.githook_edit_desc=Jeśli hook jest nieaktywny, zaprezentowana zostanie przykładowa treść. Pozostawienie pustej wartości wyłączy ten hook. settings.githook_name=Nazwa hooka @@ -1011,14 +1015,14 @@ dashboard.app_ver=Wersja aplikacji dashboard.git_version=Wersja Git dashboard.go_version=Wersja Go dashboard.build_time=Data kompilacji -dashboard.build_commit=Build commit +dashboard.build_commit=Zbuduj commit dashboard.statistic=Statystyki dashboard.operations=Operacje dashboard.system_status=Stan monitora systemu dashboard.statistic_info=Baza danych Gogs zawiera %d użytkowników, %d organizacji, %d kluczy publicznych, %d repozytoriów, %d obserwujących, %d polubionych, %d akcji, %d tokenów, %d problemów, %d komenatrzy, %d kont społecznościowych, %d obserwacji, %d mirrorów, %d wydań, %d login sources, %d webhooków, %d kamieni milowych, %d labels, %d zadań hooków, %d zespołów, %d zadań aktualizacji, %d załączników. dashboard.operation_name=Nazwa operacji dashboard.operation_switch=Przełącz -dashboard.select_operation_to_run=Please select operation to run +dashboard.select_operation_to_run=Wybierz operację do uruchomienia dashboard.operation_run=Uruchom dashboard.clean_unbind_oauth=Usuń niepowiązane wpisy OAuth dashboard.clean_unbind_oauth_success=Wszystkie niepowiązane wpisy OAuth zostały pomyślnie usunięte. @@ -1180,7 +1184,7 @@ config.server.cert_file=Pliki certyfikatu config.server.key_file=Plik klucza config.server.tls_min_version=Minimalna wersja TLS config.server.unix_socket_permission=Unix socket permission -config.server.local_root_url=Local root URL +config.server.local_root_url=Lokalny główny adres URL config.server.offline_mode=Tryb offline config.server.disable_router_log=Wyłącz dziennik routera config.server.enable_gzip=Włącz Gzip @@ -1192,7 +1196,7 @@ config.ssh_config=Konfiguracja SSH config.ssh.enabled=Aktywne config.ssh.domain=Exposed domain config.ssh.port=Exposed port -config.ssh.root_path=Root path +config.ssh.root_path=Ścieżka katalogu głównego config.ssh.keygen_path=Keygen path config.ssh.key_test_path=Key test path config.ssh.minimum_key_size_check=Minimum key size check @@ -1202,6 +1206,7 @@ config.ssh.start_builtin_server=Uruchom wbudowany serwer config.ssh.listen_host=Listen host config.ssh.listen_port=Port nasłuchu config.ssh.server_ciphers=Server ciphers +config.ssh.server_macs=Server MACs config.repo_config=Konfiguracja repozytorium config.repo.root_path=Ścieżka katalogu głównego @@ -1223,65 +1228,68 @@ config.repo.upload.file_max_size=Upload file size limit config.repo.upload.max_files=Upload files limit config.db_config=Konfiguracja bazy danych -config.db.type=Type +config.db.type=Typ config.db.host=Host -config.db.name=Name -config.db.user=User -config.db.ssl_mode=SSL mode +config.db.name=Nazwa +config.db.schema=Schema +config.db.schema_helper=(for "postgres" only) +config.db.user=Użytkownik +config.db.ssl_mode=Tryb SSL config.db.ssl_mode_helper=(for "postgres" only) -config.db.path=Path +config.db.path=Ścieżka config.db.path_helper=(for "sqlite3"only) config.db.max_open_conns=Maximum open connections config.db.max_idle_conns=Maximum idle connections config.security_config=Security configuration config.security.login_remember_days=Login remember days -config.security.cookie_remember_name=Remember cookie +config.security.cookie_remember_name=Pamiętaj pliki cookies config.security.cookie_username=Username cookie config.security.cookie_secure=Enable secure cookie config.security.reverse_proxy_auth_user=Reverse proxy authentication header config.security.enable_login_status_cookie=Enable login status cookie config.security.login_status_cookie_name=Login status cookie +config.security.local_network_allowlist=Local network allowlist -config.email_config=Email configuration -config.email.enabled=Enabled +config.email_config=Konfiguracja E-mail +config.email.enabled=Włączono config.email.subject_prefix=Subject prefix config.email.host=Host -config.email.from=From -config.email.user=User -config.email.disable_helo=Disable HELO +config.email.from=Od +config.email.user=Użytkownik +config.email.disable_helo=Wyłącz HELO config.email.helo_hostname=HELO hostname -config.email.skip_verify=Skip certificate verify +config.email.skip_verify=Pomiń weryfikację certyfikatu config.email.use_certificate=Use custom certificate config.email.cert_file=Certificate file -config.email.key_file=Key file -config.email.use_plain_text=Use plain text -config.email.add_plain_text_alt=Add plain text alternative -config.email.send_test_mail=Send test email -config.email.test_mail_failed=Failed to send test email to '%s': %v -config.email.test_mail_sent=Test email has been sent to '%s'. +config.email.key_file=Plik klucza +config.email.use_plain_text=Użyj zwykłego tekstu +config.email.add_plain_text_alt=Dodaj prosty tekst alternatywny +config.email.send_test_mail=Wyślij wiadomość testową +config.email.test_mail_failed=Nie udało się wysłać wiadomości testowej do '%s': %v +config.email.test_mail_sent=Wiadomość testowa została wysłana do '%s'. -config.auth_config=Authentication configuration +config.auth_config=Konfiguracja uwierzytelniania config.auth.activate_code_lives=Activate code lives config.auth.reset_password_code_lives=Reset password code lives -config.auth.require_email_confirm=Require email confirmation +config.auth.require_email_confirm=Wymagaj potwierdzenia adresu e-mail config.auth.require_sign_in_view=Require sign in view -config.auth.disable_registration=Disable registration +config.auth.disable_registration=Wyłącz rejestrację config.auth.enable_registration_captcha=Enable registration captcha config.auth.enable_reverse_proxy_authentication=Enable reverse proxy authentication config.auth.enable_reverse_proxy_auto_registration=Enable reverse proxy auto registration config.auth.reverse_proxy_authentication_header=Reverse proxy authentication header -config.user_config=User configuration +config.user_config=Konfiguracja użytkownika config.user.enable_email_notify=Enable email notification config.session_config=Konfiguracja sesji -config.session.provider=Provider +config.session.provider=Dostawca config.session.provider_config=Provider config -config.session.cookie_name=Cookie -config.session.https_only=HTTPS only -config.session.gc_interval=GC interval -config.session.max_life_time=Max life time +config.session.cookie_name=Ciasteczka +config.session.https_only=Tylko HTTPS +config.session.gc_interval=Interwał GC +config.session.max_life_time=Maksymalny czas życia config.session.csrf_cookie_name=CSRF cookie config.cache_config=Konfiguracja cache @@ -1293,13 +1301,13 @@ config.http_config=Konfiguracja HTTP config.http.access_control_allow_origin=Access control allow origin config.attachment_config=Attachment configuration -config.attachment.enabled=Enabled -config.attachment.path=Path -config.attachment.allowed_types=Allowed types -config.attachment.max_size=Size limit -config.attachment.max_files=Files limit +config.attachment.enabled=Włączono +config.attachment.path=Ścieżka +config.attachment.allowed_types=Dozwolone typy +config.attachment.max_size=Limit rozmiaru +config.attachment.max_files=Limit plików -config.release_config=Release configuration +config.release_config=Konfiguracja wydania config.release.attachment.enabled=Attachment enabled config.release.attachment.allowed_types=Attachment allowed types config.release.attachment.max_size=Attachment size limit @@ -1308,33 +1316,33 @@ config.release.attachment.max_files=Attachment files limit config.picture_config=Ustawienia obrazów config.picture.avatar_upload_path=User avatar upload path config.picture.repo_avatar_upload_path=Repository avatar upload path -config.picture.gravatar_source=Gravatar source -config.picture.disable_gravatar=Disable Gravatar +config.picture.gravatar_source=Źródło Gravatar +config.picture.disable_gravatar=Wyłącz Gravatar config.picture.enable_federated_avatar=Enable federated avatars -config.mirror_config=Mirror configuration -config.mirror.default_interval=Default interval +config.mirror_config=Konfiguracja serwera lustrzanego +config.mirror.default_interval=Domyślny interwał config.webhook_config=Konfiguracja webhooka -config.webhook.types=Types +config.webhook.types=Typy config.webhook.deliver_timeout=Deliver timeout -config.webhook.skip_tls_verify=Skip TLS verify +config.webhook.skip_tls_verify=Pomiń weryfikację TLS config.git_config=Konfiguracja Git config.git.disable_diff_highlight=Disable diff syntax highlight config.git.max_diff_lines=Diff lines limit (for a single file) config.git.max_diff_line_characters=Diff characters limit (for a single line) config.git.max_diff_files=Diff files limit (for a single diff) -config.git.gc_args=GC arguments -config.git.migrate_timeout=Migration timeout +config.git.gc_args=Argumenty GC +config.git.migrate_timeout=Limit czasu migracji config.git.mirror_timeout=Mirror fetch timeout config.git.clone_timeout=Clone timeout config.git.pull_timeout=Pull timeout config.git.gc_timeout=GC timeout config.lfs_config=LFS configuration -config.lfs.storage=Storage -config.lfs.objects_path=Objects path +config.lfs.storage=Magazyn +config.lfs.objects_path=Ścieżka obiektów config.log_config=Konfiguracja dziennika config.log_file_root_path=Ścieżka plików dziennika @@ -1409,7 +1417,7 @@ months=%d miesięcy %s years=%d lat %s raw_seconds=sekund raw_minutes=minut -raw_hours=hours +raw_hours=godziny [dropzone] default_message=Upuść pliki tutaj lub kliknij, aby przesłać. diff --git a/conf/locale/locale_pt-BR.ini b/conf/locale/locale_pt-BR.ini index 81f5eae71..ef0878fc1 100644 --- a/conf/locale/locale_pt-BR.ini +++ b/conf/locale/locale_pt-BR.ini @@ -44,20 +44,21 @@ issues=Problemas cancel=Cancelar [status] -page_not_found=Page Not Found -internal_server_error=Internal Server Error +page_not_found=Página Não Encontrada +internal_server_error=Erro interno do servidor [install] install=Instalação title=Etapas de instalação para primeira execução docker_helper=Se você está rodando o Gogs dentro do Docker, por favor leia os Guias cuidadosamente antes de mudar qualquer coisa nesta página! -requite_db_desc=O Gogs requer MySQL, PostgreSQL, SQLite3, MSSQL ou TiDB. +requite_db_desc=Gogs requires MySQL, PostgreSQL, SQLite3 or TiDB (via MySQL protocol). db_title=Configurações de banco de dados db_type=Tipo de banco de dados host=Host user=Usuário password=Senha db_name=Nome do banco de dados +db_schema=Schema db_helper=Por favor, use o mecanismo INNODB com o conjunto de caracteres utf8_general_ci para MySQL. ssl_mode=Modo SSL path=Caminho @@ -125,7 +126,7 @@ run_user_not_match=O usuário da execução não é o usuário atual: %s -> %s smtp_host_missing_port=O endereço do host SMTP não possui porta. invalid_smtp_from=O SMTP do campo não é válido: %v save_config_failed=Falha ao salvar a configuração: %v -init_failed=Failed to initialize application: %v +init_failed=Falha ao inicializar a aplicação: %v invalid_admin_setting=Configuração da conta de administrador está inválida: %v install_success=Bem-vindo! Estamos contentes que você escolheu o Gogs, divirta-se e tenha cuidado. invalid_log_root_path=Pasta raíz do log é inválida: %v @@ -155,7 +156,7 @@ register_hepler_msg=Já tem uma conta? Entre agora! social_register_hepler_msg=Já tem uma conta? Junte-se agora! disable_register_prompt=Desculpe, novos registros estão desabilitados. Por favor entre em contato com o administrador do site. disable_register_mail=Desculpe, a confirmação de registro por e-mail foi desabilitada. -auth_source=Authentication Source +auth_source=Fonte de autenticação local=Local remember_me=Lembrar de mim forgot_password=Esqueci a senha @@ -235,7 +236,7 @@ org_name_been_taken=Nome da organização já foi tomado. team_name_been_taken=Nome da equipe já existe. email_been_used=Endereço de e-mail já foi usado. username_password_incorrect=Usuário ou senha incorretos. -auth_source_mismatch=The authentication source selected is not associated with the user. +auth_source_mismatch=A fonte de autenticação selecionada não está associada ao usuário. enterred_invalid_repo_name=Por favor certifique-se que informou o nome do repositório corretamente. enterred_invalid_owner_name=Por favor, verifique se o nome do proprietário está correto. enterred_invalid_password=Por favor, verifique se a senha que você digitou está correta. @@ -263,7 +264,7 @@ following=Seguindo follow=Seguir unfollow=Deixar de seguir -form.name_not_allowed=User name or pattern %q is not allowed. +form.name_not_allowed=Nome de usuário ou padrão %q não é permitido. [settings] profile=Perfil @@ -354,7 +355,7 @@ two_factor_or_enter_secret=Ou informe o segredo: two_factor_then_enter_passcode=Em seguida digite a senha: two_factor_verify=Verificar two_factor_invalid_passcode=A senha inserida é inválida. Tente novamente! -two_factor_reused_passcode=The passcode you entered has already been used, please try another one! +two_factor_reused_passcode=A senha fornecida já foi usada, por favor tente outra! two_factor_enable_error=Falha ao ativar a autenticação de dois fatores: %v two_factor_enable_success=A autenticação de dois fatores foi ativada para a sua conta com sucesso! two_factor_recovery_codes_title=Códigos de recup. p/ autenticação de dois fatores @@ -377,7 +378,7 @@ delete_token=Excluir access_token_deletion=Exclusão do token de acesso pessoal access_token_deletion_desc=Ao Excluir este token de acesso pessoal será removido todos os acessos do aplicativo. Você deseja continuar? delete_token_success=O Token de acesso pessoal foi removido com sucesso! Não se esqueça de atualizar seus aplicativos também. -token_name_exists=Token with same name already exists. +token_name_exists=Já existe um token com o mesmo nome. orgs.none=Você não é participante de nenhuma organização. orgs.leave_title=Deixar uma organização @@ -399,7 +400,9 @@ owner=Dono repo_name=Nome do repositório repo_name_helper=Nomes de repositórios bons são pequenos, memorizáveis e únicos. visibility=Visibilidade +unlisted=Unlisted visiblity_helper=Este é um repositório privado +unlisted_helper=This repository is Unlisted visiblity_helper_forced=O adminstrador forçou todos os novos repositórios para serem privados visiblity_fork_helper=(A alteração desse valor irá afetar todos os forks) clone_helper=Precisa de ajuda com o clone? Visite a Ajuda! @@ -425,11 +428,11 @@ mirror_last_synced=Última sincronização watchers=Observadores stargazers=Usuários que estrelaram forks=Forks -repo_description_helper=Description of repository. Maximum 512 characters length. -repo_description_length=Available characters +repo_description_helper=Descrição do repositório. Tamanho máximo de 512 caracteres. +repo_description_length=Caracteres disponíveis form.reach_limit_of_creation=O proprietário atingiu o limite máximo de criação de repositórios de %d. -form.name_not_allowed=Repository name or pattern %q is not allowed. +form.name_not_allowed=Nome de usuário ou padrão %q não é permitido. need_auth=Precisa de autorização migrate_type=Tipo de migração @@ -440,6 +443,7 @@ migrate.clone_address_desc=Pode ser um URL HTTP/HTTPS/GIT. migrate.clone_address_desc_import_local=Você também pode migrar um repositório pelo path do servidor local. migrate.permission_denied=Você não pode importar repositórios locais. migrate.invalid_local_path=Caminho local inválido, não existe ou não é um diretório. +migrate.clone_address_resolved_to_blocked_local_address=Clone address resolved to a local network address that is implicitly blocked. migrate.failed=Migração falhou: %v mirror_from=mirror de @@ -523,7 +527,7 @@ editor.file_changed_while_editing=O conteúdo do arquivo mudou desde que você c editor.file_already_exists=Um arquivo com nome '%s' já existe neste repositório. editor.no_changes_to_show=Nenhuma alteração a mostrar. editor.fail_to_update_file=Houve erro ao criar ou atualizar arquivo '%s': %v -editor.fail_to_delete_file=Failed to delete file '%s' with error: %v +editor.fail_to_delete_file=Falha ao excluir arquivo '%s' com erro: %v editor.add_subdir=Adicionar o subdiretório... editor.unable_to_upload_files=Houve erro ao fazer upload de arquivos para '%s': %v editor.upload_files_to_dir=Enviar arquivos para '%s' @@ -643,8 +647,8 @@ pulls.can_auto_merge_desc=O merge deste Pull Pequest pode ser aplicado automatic pulls.cannot_auto_merge_desc=O merge deste Pull Request não pode ser aplicado automaticamente pois há conflitos. pulls.cannot_auto_merge_helper=Por favor, aplique o merge manualmente para resolver os conflitos. pulls.create_merge_commit=Criar commit de um merge -pulls.rebase_before_merging=Rebase before merging -pulls.commit_description=Commit Description +pulls.rebase_before_merging=Execute rebase antes de fazer merge +pulls.commit_description=Descrição do Commit pulls.merge_pull_request=Solicitação de merge de Pull Request pulls.open_unmerged_pull_exists=`Você não pode executar a operação de reabrir porque já existe um Pull request aberto (#%d) do mesmo repositório com as mesmas informações de merge e está esperando pelo merge.` pulls.delete_branch=Excluir Branch @@ -749,7 +753,7 @@ settings.tracker_issue_style=Estilo de nome de issue tracker externo: settings.tracker_issue_style.numeric=Numérico settings.tracker_issue_style.alphanumeric=Alfanumérico settings.tracker_url_format_desc=Você pode usar o espaço reservado {user} {repo} {index} para o nome do usuário, índice de nome e a questão do repositório. -settings.pulls_desc=Enable pull requests to accept contributions between repositories and branches +settings.pulls_desc=Habilitar pull requests para aceitar contribuições entre repositórios e branches settings.pulls.ignore_whitespace=Ignorar alterações em espaço em branco settings.pulls.allow_rebase_merge=Permitir rebase para commits via merge settings.danger_zone=Zona de perigo @@ -789,8 +793,8 @@ settings.remove_collaborator_success=O colaborador foi removido. settings.search_user_placeholder=Pesquisar usuário... settings.org_not_allowed_to_be_collaborator=Organização não tem permissão para ser adicionada como um colaborador. settings.hooks_desc=Hooks da web ou Webhooks permitem serviços externos serem notificados quando certos eventos acontecem no Gogs. Quando acontecem os eventos especificados, enviaremos uma solicitação POST para cada uma das URLs que você fornecer. Saiba mais no nosso Guia de Webhooks. -settings.webhooks.add_new=Add a new webhook: -settings.webhooks.choose_a_type=Choose a type... +settings.webhooks.add_new=Adicionar um novo webhook: +settings.webhooks.choose_a_type=Escolha um tipo... settings.add_webhook=Adicionar Webhook settings.webhook_deletion=Deletar Webhook settings.webhook_deletion_desc=Deletar este Webhook vai remover sua informação e todo o histórico de entrega. Deseja continuar? @@ -805,8 +809,8 @@ settings.webhook.response=Resposta settings.webhook.headers=Cabeçalhos settings.webhook.payload=Payload settings.webhook.body=Corpo -settings.webhook.err_cannot_parse_payload_url=Cannot parse payload URL: %v -settings.webhook.err_cannot_use_local_addresses=Non admins are not allowed to use local addresses. +settings.webhook.err_cannot_parse_payload_url=Não foi possível analisar a URL da carga: %v +settings.webhook.url_resolved_to_blocked_local_address=Payload URL resolved to a local network address that is implicitly blocked. settings.githooks_desc=Hooks do Git são ofertados pelo próprio Git, você pode editar arquivos de hooks suportados na lista abaixo para aplicar operações personalizadas. settings.githook_edit_desc=Se o hook não estiver ativo, o conteúdo de exemplo será apresentado. Deixar o conteúdo em branco irá desativar esse hook. settings.githook_name=Nome do Hook @@ -867,8 +871,8 @@ settings.add_key_success=A nova chave de Deploy '%s' foi adicionada com sucesso! settings.deploy_key_deletion=Exclusão de chave de Deploy settings.deploy_key_deletion_desc=Excluir esta chave de Deploy removerá permissões de acesso a este repositório. Quer mesmo continuar? settings.deploy_key_deletion_success=Chave de Deploy excluída com sucesso! -settings.description_desc=Description of repository. Maximum 512 characters length. -settings.description_length=Available characters +settings.description_desc=Descrição do repositório. Tamanho máximo de 512 caracteres. +settings.description_length=Caracteres disponíveis diff.browse_source=Ver código fonte diff.parent=pai @@ -933,8 +937,8 @@ team_name_helper=Você usará este nome para mencionar esta equipe em conversas. team_desc_helper=Do que trata essa equipe? team_permission_desc=Que nível de permissão esta equipe deve ter? -form.name_not_allowed=Organization name or pattern %q is not allowed. -form.team_name_not_allowed=Team name or pattern %q is not allowed. +form.name_not_allowed=Nome da organização ou padrão %q não é permitido. +form.team_name_not_allowed=Nome do time ou padrão %q não é permitido. settings=Configurações settings.options=Opções @@ -1006,19 +1010,19 @@ first_page=Primeira last_page=Última total=Total: %d -dashboard.build_info=Build Information -dashboard.app_ver=Application version -dashboard.git_version=Git version -dashboard.go_version=Go version -dashboard.build_time=Build time -dashboard.build_commit=Build commit +dashboard.build_info=Informações da compilação +dashboard.app_ver=Versão do aplicativo +dashboard.git_version=Versão do Git +dashboard.go_version=Versão Go +dashboard.build_time=Data de compilação +dashboard.build_commit=Commit da compilação dashboard.statistic=Estatística dashboard.operations=Operações dashboard.system_status=Status do monitor de sistema dashboard.statistic_info=O banco de dados do Gogs contém %d usuários, %d organizações, %d chaves públicas, %d repositórios, %d observadores, %d estrelas, %d ações, %d acessos, %d questões, %d comentários, %d contas sociais, %d seguidores, %d espelhos, %d versões, %d origens de login, %d Hooks da Web, %d milestones, %d labels, %d tarefas hook, %d equipes, %d tarefas de atualização, %d anexos. dashboard.operation_name=Nome da operação dashboard.operation_switch=Trocar -dashboard.select_operation_to_run=Please select operation to run +dashboard.select_operation_to_run=Selecione a operação para executar dashboard.operation_run=Executar dashboard.clean_unbind_oauth=Limpar OAuthes não acoplados dashboard.clean_unbind_oauth_success=Todos OAuthes desvinculados foram excluídos com sucesso. @@ -1110,12 +1114,12 @@ repos.stars=Favoritos repos.issues=Issues repos.size=Tamanho -auths.auth_sources=Authentication Sources +auths.auth_sources=Fontes de autenticação auths.new=Adicionar nova fonte auths.name=Nome auths.type=Tipo auths.enabled=Habilitado -auths.default=Default +auths.default=Padrão auths.updated=Atualizado auths.auth_type=Tipo de autenticação auths.auth_name=Nome da autenticação @@ -1135,7 +1139,7 @@ auths.attribute_name=Atributo do Nome auths.attribute_surname=Atributo sobrenome auths.attribute_mail=Atributo e-mail auths.verify_group_membership=Verificar associação a grupo -auths.group_search_base_dn=Group Search Base DN +auths.group_search_base_dn=Grupo de Pesquisa DN Base auths.group_filter=Filtro de Grupo auths.group_attribute_contain_user_list=Atributo do grupo contendo a lista de usuários auths.user_attribute_listed_in_group=Atributo do usuário listado no grupo @@ -1154,7 +1158,7 @@ auths.pam_service_name=Nome de Serviço PAM auths.enable_auto_register=Habilitar Registro Automático auths.edit=Editar a configuração de autenticação auths.activated=Esta autenticação foi ativada -auths.default_auth=This authentication is default login source +auths.default_auth=Esta autenticação é uma fonte padrão de login auths.new_success=Nova autenticação '%s' foi adicionada com sucesso. auths.update_success=A configuração da autenticação foi atualizada com sucesso. auths.update=Atualizar a configuração da autenticação @@ -1164,28 +1168,28 @@ auths.delete_auth_desc=Esta autenticação esta prestes a ser excluída, deseja auths.still_in_used=Esta autenticação ainda é usada por alguns usuários. Por favor remova ou converta esses usuários para outro tipo de login primeiro. auths.deletion_success=Autenticação excluída com sucesso! auths.login_source_exist=A fonte de login '%s" já existe. -auths.github_api_endpoint=API Endpoint +auths.github_api_endpoint=Endpoint da API config.not_set=(não definido) config.server_config=Configuração do servidor -config.brand_name=Brand name +config.brand_name=Nome da marca config.run_user=Usuário de execução config.run_mode=Modo de execução -config.server.external_url=External URL -config.server.domain=Domain -config.server.protocol=Protocol -config.server.http_addr=HTTP address -config.server.http_port=HTTP port -config.server.cert_file=Certificate file -config.server.key_file=Key file -config.server.tls_min_version=Minimum TLS version -config.server.unix_socket_permission=Unix socket permission -config.server.local_root_url=Local root URL -config.server.offline_mode=Offline mode -config.server.disable_router_log=Disable router log -config.server.enable_gzip=Enable Gzip -config.server.app_data_path=Application data path -config.server.load_assets_from_disk=Load assets from disk +config.server.external_url=URL externa +config.server.domain=Domínio +config.server.protocol=Protocolo +config.server.http_addr=Endereço HTTP +config.server.http_port=Porta HTTP +config.server.cert_file=Arquivo de certificado +config.server.key_file=Arquivo chave +config.server.tls_min_version=Versão mínima de TLS +config.server.unix_socket_permission=Permissão de soquete Unix +config.server.local_root_url=URL raiz local +config.server.offline_mode=Modo offline +config.server.disable_router_log=Desabilitar log do router +config.server.enable_gzip=Ativar Gzip +config.server.app_data_path=Caminho de dados da aplicação +config.server.load_assets_from_disk=Carregar ativos do disco config.server.landing_url=Landing URL config.ssh_config=Configuração de SSH @@ -1202,6 +1206,7 @@ config.ssh.start_builtin_server=Start builtin server config.ssh.listen_host=Listen host config.ssh.listen_port=Listen port config.ssh.server_ciphers=Server ciphers +config.ssh.server_macs=Server MACs config.repo_config=Configuração do Repositório config.repo.root_path=Root path @@ -1226,6 +1231,8 @@ config.db_config=Configuração do banco de dados config.db.type=Type config.db.host=Host config.db.name=Name +config.db.schema=Schema +config.db.schema_helper=(for "postgres" only) config.db.user=User config.db.ssl_mode=SSL mode config.db.ssl_mode_helper=(for "postgres" only) @@ -1241,7 +1248,8 @@ config.security.cookie_username=Username cookie config.security.cookie_secure=Enable secure cookie config.security.reverse_proxy_auth_user=Reverse proxy authentication header config.security.enable_login_status_cookie=Enable login status cookie -config.security.login_status_cookie_name=Login status cookie +config.security.login_status_cookie_name=Cookie para estado do login +config.security.local_network_allowlist=Local network allowlist config.email_config=Email configuration config.email.enabled=Enabled diff --git a/conf/locale/locale_pt-PT.ini b/conf/locale/locale_pt-PT.ini index b6703a47e..54df606b3 100644 --- a/conf/locale/locale_pt-PT.ini +++ b/conf/locale/locale_pt-PT.ini @@ -51,13 +51,14 @@ internal_server_error=Internal Server Error install=Instalação title=Procedimentos para a instalação inicial docker_helper=Se estiver a executar o Gogs dentro de uma instância Docker, por favor leia asOrientações com atenção, antes de alterar algo nesta página! -requite_db_desc=Gogs requer uma destas base de dados: MySQL, PostgreSQL, SQLite3, MSSQL ou TiDB. +requite_db_desc=Gogs requires MySQL, PostgreSQL, SQLite3 or TiDB (via MySQL protocol). db_title=Configurações da Base de Dados db_type=Tipo de Base de Dados host=Servidor user=Utilizador password=Palavra-Chave db_name=Nome da base de dados +db_schema=Schema db_helper=Por favor, utilize o motor INNODB do MySQL, com suporte para o mapa de caracteres utf8_general_ci. ssl_mode=Modo SSL path=Directoria @@ -399,7 +400,9 @@ owner=Proprietário repo_name=Nome do Repositório repo_name_helper=Um Bom nome de repositório e pequeno, memorável e único. visibility=Visibilidade +unlisted=Unlisted visiblity_helper=Este repositório é Privado +unlisted_helper=This repository is Unlisted visiblity_helper_forced=Administrador do site forçou todos os novos repositórios paraPrivado visiblity_fork_helper=(Alterar desse valor irá afetar todos os forks) clone_helper=Precisa de ajuda com o clone? Visite a Ajuda! @@ -440,6 +443,7 @@ migrate.clone_address_desc=Isto pode ser um URL de HTTP/HTTPS/GIT. migrate.clone_address_desc_import_local=Você também pode migrar um repositório pelo caminho do servidor local. migrate.permission_denied=Não está autorizado a importar repositórios locais. migrate.invalid_local_path=Caminho local inválido, o caminho não existe ou não é um directório. +migrate.clone_address_resolved_to_blocked_local_address=Clone address resolved to a local network address that is implicitly blocked. migrate.failed=Migração falhada: %v mirror_from=mirror de @@ -806,7 +810,7 @@ settings.webhook.headers=Cabeçalho settings.webhook.payload=Payload settings.webhook.body=Corpo settings.webhook.err_cannot_parse_payload_url=Cannot parse payload URL: %v -settings.webhook.err_cannot_use_local_addresses=Non admins are not allowed to use local addresses. +settings.webhook.url_resolved_to_blocked_local_address=Payload URL resolved to a local network address that is implicitly blocked. settings.githooks_desc=Hooks do Git são disponibilizados pelo próprio Git, pode editar ficheiros de Hooks suportados na lista abaixo para aplicar operações personalizadas. settings.githook_edit_desc=Se o hook estiver inativo, o conteúdo de exemplo será apresentado. Deixar o conteúdo em branco irá desativar este hook. settings.githook_name=Nome do Hook @@ -1202,6 +1206,7 @@ config.ssh.start_builtin_server=Start builtin server config.ssh.listen_host=Listen host config.ssh.listen_port=Listen port config.ssh.server_ciphers=Server ciphers +config.ssh.server_macs=Server MACs config.repo_config=Configuração de repositório config.repo.root_path=Root path @@ -1226,6 +1231,8 @@ config.db_config=Configuração da base de dados config.db.type=Type config.db.host=Host config.db.name=Name +config.db.schema=Schema +config.db.schema_helper=(for "postgres" only) config.db.user=User config.db.ssl_mode=SSL mode config.db.ssl_mode_helper=(for "postgres" only) @@ -1242,6 +1249,7 @@ config.security.cookie_secure=Enable secure cookie config.security.reverse_proxy_auth_user=Reverse proxy authentication header config.security.enable_login_status_cookie=Enable login status cookie config.security.login_status_cookie_name=Login status cookie +config.security.local_network_allowlist=Local network allowlist config.email_config=Email configuration config.email.enabled=Enabled diff --git a/conf/locale/locale_ru-RU.ini b/conf/locale/locale_ru-RU.ini index 1effc3875..3d1904ba8 100644 --- a/conf/locale/locale_ru-RU.ini +++ b/conf/locale/locale_ru-RU.ini @@ -44,20 +44,21 @@ issues=Задачи cancel=Отмена [status] -page_not_found=Page Not Found -internal_server_error=Internal Server Error +page_not_found=Страница не найдена +internal_server_error=Внутренняя ошибка сервера [install] install=Установка title=Установочные шаги для первого запуска docker_helper=Если вы запускаете Gogs внутри Docker, пожалуйста прочтите эти советы внимательно перед тем как что-либо изменить на этой странице! -requite_db_desc=Gogs требует наличия MySQL, PostgreSQL, SQLite3, MSSQL или TiDB. +requite_db_desc=Gogs requires MySQL, PostgreSQL, SQLite3 or TiDB (via MySQL protocol). db_title=Настройки базы данных db_type=Тип базы данных host=Хост user=Пользователь password=Пароль db_name=Имя базы данных +db_schema=Schema db_helper=Для MySQL используйте тип таблиц InnoDB с кодировкой utf8_general_ci. ssl_mode=Режим SSL path=Путь @@ -90,7 +91,7 @@ enable_console_mode_popup=В дополнение к файловому режи optional_title=Расширенные настройки email_title=Настройки службы электронной почты -smtp_host=Узел SMTP +smtp_host=Хост SMTP smtp_from=Из smtp_from_helper=Почта от адреса, RFC 5322. Это может быть email адрес или формат "Имя" . mailer_user=Электронная почта отправителя @@ -263,7 +264,7 @@ following=Подписан follow=Подписаться unfollow=Отписаться -form.name_not_allowed=User name or pattern %q is not allowed. +form.name_not_allowed=Имя пользователя «%s» не допускается. [settings] profile=Профиль @@ -399,8 +400,10 @@ owner=Владелец repo_name=Имя репозитория repo_name_helper=Лучшие названия репозиториев коротки, запоминаемы и уникальны. visibility=Видимость -visiblity_helper=Личный репозиторий -visiblity_helper_forced=Все новые репозитории являются Личными по желанию администратора сайта +unlisted=Unlisted +visiblity_helper=Приватный репозиторий +unlisted_helper=This repository is Unlisted +visiblity_helper_forced=Администрация сайта сделала все новые репозитории Приватными visiblity_fork_helper=(Изменение этого значения затронет все ответвления) clone_helper=Нужна помощь в клонировании? Посетите страницу помощи! fork_repo=Ответвить репозиторий @@ -429,7 +432,7 @@ repo_description_helper=Описание репозитория. Максима repo_description_length=Доступные символы form.reach_limit_of_creation=У владельца достигнут максимальный предел в %d создаваемых репозиториев. -form.name_not_allowed=Repository name or pattern %q is not allowed. +form.name_not_allowed=Имя или шаблон репозитория% q недопустимы. need_auth=Требуется авторизация migrate_type=Тип миграции @@ -440,6 +443,7 @@ migrate.clone_address_desc=Это может быть HTTP/HTTPS/GIT URL-адр migrate.clone_address_desc_import_local=Вы также можете мигрировать репозиторий по локальному пути на сервере. migrate.permission_denied=У вас нет прав на импорт локальных репозиториев. migrate.invalid_local_path=Недопустимый локальный путь. Возможно он не существует или является не папкой. +migrate.clone_address_resolved_to_blocked_local_address=Clone address resolved to a local network address that is implicitly blocked. migrate.failed=Миграция не удалась: %v mirror_from=зеркало из @@ -789,8 +793,8 @@ settings.remove_collaborator_success=Соавтор был удален. settings.search_user_placeholder=Поиск пользователя... settings.org_not_allowed_to_be_collaborator=Организации не могут быть добавлены как соавторы. settings.hooks_desc=Webhooks позволяют внешним службам получать уведомления при возникновении определенных событий на Gogs. При возникновении указанных событий мы отправим запрос POST на каждый заданный вами URL. Узнать больше можно в нашем Руководстве по Webhooks. -settings.webhooks.add_new=Add a new webhook: -settings.webhooks.choose_a_type=Choose a type... +settings.webhooks.add_new=Добавьте новый веб-перехватчик: +settings.webhooks.choose_a_type=Выберите тип... settings.add_webhook=Добавить Webhook settings.webhook_deletion=Удалить веб-хук settings.webhook_deletion_desc=Удаление этого веб-хука приведет к удалению всей, связанной с ним, информации, включая историю. Хотите продолжить? @@ -805,8 +809,8 @@ settings.webhook.response=Ответ settings.webhook.headers=Заголовки settings.webhook.payload=Содержимое запроса settings.webhook.body=Тело ответа -settings.webhook.err_cannot_parse_payload_url=Cannot parse payload URL: %v -settings.webhook.err_cannot_use_local_addresses=Non admins are not allowed to use local addresses. +settings.webhook.err_cannot_parse_payload_url=Невозможно разобрать URL-адрес полезной нагрузки: %v +settings.webhook.url_resolved_to_blocked_local_address=Payload URL resolved to a local network address that is implicitly blocked. settings.githooks_desc=Git-хуки предоставляются Git самим по себе, вы можете изменять файлы поддерживаемых хуков из списка ниже чтобы выполнять внешние операции. settings.githook_edit_desc=Если хук не активен, будет подставлен пример содержимого. Пустое значение в этом поле приведет к отключению хука. settings.githook_name=Название Hook'a @@ -933,8 +937,8 @@ team_name_helper=Вы будете использовать это имя для team_desc_helper=Что это за команда? team_permission_desc=Какой уровень разрешений должен быть у этой команды? -form.name_not_allowed=Organization name or pattern %q is not allowed. -form.team_name_not_allowed=Team name or pattern %q is not allowed. +form.name_not_allowed=Имя или шаблон организации% q недопустимы. +form.team_name_not_allowed=Имя команды или шаблон% q недопустимы. settings=Настройки settings.options=Опции @@ -955,9 +959,9 @@ settings.hooks_desc=Добавьте автоматическое обновле members.membership_visibility=Видимость участника команды: members.public=Публичный -members.public_helper=Сделать Приватным +members.public_helper=Сделать приватным members.private=Приватный -members.private_helper=Сделать Публичным +members.private_helper=Сделать публичным members.member_role=Роль участника: members.owner=Владелец members.member=Участник @@ -1018,7 +1022,7 @@ dashboard.system_status=Статус системного монитора dashboard.statistic_info=В базе данных Gogs записано %d пользователей, %d организаций, %d публичных ключей, %d репозиториев, %d подписок на репозитории, %d добавлений в избранное, %d действий, %d доступов, %d задач, %d комментариев, %d социальных учетных записей, %d подписок на пользователей, %d зеркал, %d релизов, %d источников входа, %d веб-хуков, %d этапов, %d меток, %d задач хуков, %d команд, %d задач по обновлению, %d присоединенных файлов. dashboard.operation_name=Наименование Операции dashboard.operation_switch=Переключить -dashboard.select_operation_to_run=Please select operation to run +dashboard.select_operation_to_run=Пожалуйста, выберите операцию для запуска dashboard.operation_run=Запуск dashboard.clean_unbind_oauth=Удалить не привязанные OAUth dashboard.clean_unbind_oauth_success=Не привязанные OAuth аккаунты успешно удалены. @@ -1144,7 +1148,7 @@ auths.filter=Фильтр пользователя auths.admin_filter=Фильтр администратора auths.ms_ad_sa=Ms Ad SA auths.smtp_auth=Тип аутентификации SMTP -auths.smtphost=Узел SMTP +auths.smtphost=Хост SMTP auths.smtpport=SMTP-порт auths.allowed_domains=Разрешенные домены auths.allowed_domains_helper=Оставьте пустым чтобы не ограничивать домены. Несколько доменов должны быть разделены запятыми ','. @@ -1179,37 +1183,38 @@ config.server.http_port=Порт HTTP config.server.cert_file=Файл сертификата config.server.key_file=Файл ключа config.server.tls_min_version=Минимальная версия TLS -config.server.unix_socket_permission=Unix socket permission -config.server.local_root_url=Local root URL +config.server.unix_socket_permission=Разрешение сокета Unix +config.server.local_root_url=Локальный корневой URL config.server.offline_mode=Автономный режим -config.server.disable_router_log=Disable router log +config.server.disable_router_log=Отключить журнал маршрутизатора config.server.enable_gzip=Включить Gzip -config.server.app_data_path=Application data path -config.server.load_assets_from_disk=Load assets from disk +config.server.app_data_path=Путь к данным приложения +config.server.load_assets_from_disk=Загрузить ассеты с диска config.server.landing_url=Landing URL config.ssh_config=Конфигурация SSH -config.ssh.enabled=Enabled -config.ssh.domain=Exposed domain -config.ssh.port=Exposed port -config.ssh.root_path=Root path -config.ssh.keygen_path=Keygen path -config.ssh.key_test_path=Key test path +config.ssh.enabled=Включено +config.ssh.domain=Выделенный домен +config.ssh.port=Выделенный порт +config.ssh.root_path=Корневой путь +config.ssh.keygen_path=Путь к ключу +config.ssh.key_test_path=Путь к тестовому ключу config.ssh.minimum_key_size_check=Проверка минимальной длины ключа config.ssh.minimum_key_sizes=Минимальные размеры ключа -config.ssh.rewrite_authorized_keys_at_start=Rewrite "authorized_keys" at start -config.ssh.start_builtin_server=Start builtin server -config.ssh.listen_host=Listen host -config.ssh.listen_port=Listen port -config.ssh.server_ciphers=Server ciphers +config.ssh.rewrite_authorized_keys_at_start=Перезаписать "authorized_keys" при запуске +config.ssh.start_builtin_server=Запустить встроенный сервер +config.ssh.listen_host=Прослушиваемый хост +config.ssh.listen_port=Прослушиваемый порт +config.ssh.server_ciphers=Серверные шифры +config.ssh.server_macs=Server MACs config.repo_config=Настройка репозитория -config.repo.root_path=Root path -config.repo.script_type=Script type -config.repo.ansi_chatset=ANSI charset -config.repo.force_private=Force private -config.repo.max_creation_limit=Max creation limit -config.repo.preferred_licenses=Preferred licenses +config.repo.root_path=Корневой путь +config.repo.script_type=Тип скрипта +config.repo.ansi_chatset=ANSI-кодировка +config.repo.force_private=Сделать приватным(и) принудительно +config.repo.max_creation_limit=Максимальный лимит созданий +config.repo.preferred_licenses=Предпочтительные лицензии config.repo.disable_http_git=Выключить HTTP Git config.repo.enable_local_path_migration=Enable local path migration config.repo.enable_raw_file_render_mode=Enable raw file render mode @@ -1219,122 +1224,125 @@ config.repo.editor.previewable_file_modes=Editor previewable file modes config.repo.upload.enabled=Upload enabled config.repo.upload.temp_path=Upload temporary path config.repo.upload.allowed_types=Upload allowed types -config.repo.upload.file_max_size=Upload file size limit -config.repo.upload.max_files=Upload files limit +config.repo.upload.file_max_size=Ограничение размера файлов для загрузки +config.repo.upload.max_files=Ограничение файлов для загрузки config.db_config=Конфигурация базы данных -config.db.type=Type -config.db.host=Host -config.db.name=Name -config.db.user=User -config.db.ssl_mode=SSL mode -config.db.ssl_mode_helper=(for "postgres" only) -config.db.path=Path -config.db.path_helper=(for "sqlite3"only) -config.db.max_open_conns=Maximum open connections -config.db.max_idle_conns=Maximum idle connections +config.db.type=Тип +config.db.host=Сервер +config.db.name=Имя +config.db.schema=Schema +config.db.schema_helper=(for "postgres" only) +config.db.user=Пользователь +config.db.ssl_mode=Режим SSL +config.db.ssl_mode_helper=(только для "postgres") +config.db.path=Путь +config.db.path_helper=(только для "sqlite3") +config.db.max_open_conns=Максимальное количество открытых соединений +config.db.max_idle_conns=Максимальное количество свободных соединений -config.security_config=Security configuration -config.security.login_remember_days=Login remember days -config.security.cookie_remember_name=Remember cookie -config.security.cookie_username=Username cookie -config.security.cookie_secure=Enable secure cookie +config.security_config=Конфигурация безопасности +config.security.login_remember_days=Запоминать дни входа +config.security.cookie_remember_name=Запоминать cookie +config.security.cookie_username=Cookie юзернейма +config.security.cookie_secure=Включить безопасные cookie config.security.reverse_proxy_auth_user=Reverse proxy authentication header -config.security.enable_login_status_cookie=Enable login status cookie -config.security.login_status_cookie_name=Login status cookie +config.security.enable_login_status_cookie=Включить файл cookie состояния входа +config.security.login_status_cookie_name=Файл cookie состояния входа +config.security.local_network_allowlist=Local network allowlist -config.email_config=Email configuration -config.email.enabled=Enabled -config.email.subject_prefix=Subject prefix -config.email.host=Host -config.email.from=From -config.email.user=User -config.email.disable_helo=Disable HELO -config.email.helo_hostname=HELO hostname -config.email.skip_verify=Skip certificate verify -config.email.use_certificate=Use custom certificate -config.email.cert_file=Certificate file -config.email.key_file=Key file -config.email.use_plain_text=Use plain text -config.email.add_plain_text_alt=Add plain text alternative -config.email.send_test_mail=Send test email -config.email.test_mail_failed=Failed to send test email to '%s': %v -config.email.test_mail_sent=Test email has been sent to '%s'. +config.email_config=E-mail настройки +config.email.enabled=Включено +config.email.subject_prefix=Префикс темы +config.email.host=Сервер +config.email.from=Из +config.email.user=Пользователь +config.email.disable_helo=Отключить HELO +config.email.helo_hostname=HELO имя хоста +config.email.skip_verify=Пропустить проверку сертификата +config.email.use_certificate=Использовать собственный сертификат +config.email.cert_file=Файл сертификата +config.email.key_file=Файл ключа +config.email.use_plain_text=Использовать простой текст +config.email.add_plain_text_alt=Добавить альтернативный текст +config.email.send_test_mail=Отправить тестовое письмо +config.email.test_mail_failed=Не удалось отправить тестовое письмо на %s: %v +config.email.test_mail_sent=Тестовое письмо было отправлено на %s -config.auth_config=Authentication configuration +config.auth_config=Конфигурация аутентификации config.auth.activate_code_lives=Activate code lives -config.auth.reset_password_code_lives=Reset password code lives -config.auth.require_email_confirm=Require email confirmation -config.auth.require_sign_in_view=Require sign in view -config.auth.disable_registration=Disable registration -config.auth.enable_registration_captcha=Enable registration captcha -config.auth.enable_reverse_proxy_authentication=Enable reverse proxy authentication -config.auth.enable_reverse_proxy_auto_registration=Enable reverse proxy auto registration -config.auth.reverse_proxy_authentication_header=Reverse proxy authentication header +config.auth.reset_password_code_lives=Срок действия кода сброса пароля +config.auth.require_email_confirm=Требовать подтверждение по электронной почте +config.auth.require_sign_in_view=Для просмотра требуется войти +config.auth.disable_registration=Отключить регистрацию +config.auth.enable_registration_captcha=Включить CAPTCHA при регистрации +config.auth.enable_reverse_proxy_authentication=Включить аутентификацию обратного прокси +config.auth.enable_reverse_proxy_auto_registration=Включить авторегистрацию обратного прокси +config.auth.reverse_proxy_authentication_header=Заголовок аутентификации обратного прокси -config.user_config=User configuration -config.user.enable_email_notify=Enable email notification +config.user_config=Конфигурация пользователя +config.user.enable_email_notify=Включить почтовые уведомления config.session_config=Конфигурация сессии -config.session.provider=Provider -config.session.provider_config=Provider config -config.session.cookie_name=Cookie -config.session.https_only=HTTPS only +config.session.provider=Провайдер +config.session.provider_config=Конфигурация провайдера +config.session.cookie_name=Файл cookie +config.session.https_only=Только HTTPS config.session.gc_interval=GC interval -config.session.max_life_time=Max life time +config.session.max_life_time=Максимальный срок действия config.session.csrf_cookie_name=CSRF cookie config.cache_config=Настройки кеша config.cache.adapter=Adapter config.cache.interval=GC interval -config.cache.host=Host +config.cache.host=Хост config.http_config=Конфигурация HTTP config.http.access_control_allow_origin=Access control allow origin -config.attachment_config=Attachment configuration -config.attachment.enabled=Enabled -config.attachment.path=Path -config.attachment.allowed_types=Allowed types -config.attachment.max_size=Size limit -config.attachment.max_files=Files limit +config.attachment_config=Конфигурация вложений +config.attachment.enabled=Включено +config.attachment.path=Путь +config.attachment.allowed_types=Разрешенные типы +config.attachment.max_size=Ограничение размера +config.attachment.max_files=Ограничение файлов -config.release_config=Release configuration -config.release.attachment.enabled=Attachment enabled -config.release.attachment.allowed_types=Attachment allowed types -config.release.attachment.max_size=Attachment size limit -config.release.attachment.max_files=Attachment files limit +config.release_config=Конфигурация релиза +config.release.attachment.enabled=Вложения включены +config.release.attachment.allowed_types=Разрешенные типы вложений +config.release.attachment.max_size=Лимит размера вложения +config.release.attachment.max_files=Лимит файлов вложения config.picture_config=Настройка изображения -config.picture.avatar_upload_path=User avatar upload path -config.picture.repo_avatar_upload_path=Repository avatar upload path -config.picture.gravatar_source=Gravatar source -config.picture.disable_gravatar=Disable Gravatar -config.picture.enable_federated_avatar=Enable federated avatars +config.picture.avatar_upload_path=Путь загрузки пользовательского аватара +config.picture.repo_avatar_upload_path=Путь загрузки аватара в репозитории +config.picture.gravatar_source=Источник Gravatar +config.picture.disable_gravatar=Отключить Gravatar +config.picture.enable_federated_avatar=Включить федеративные аватары -config.mirror_config=Mirror configuration -config.mirror.default_interval=Default interval +config.mirror_config=Конфигурация зеркала +config.mirror.default_interval=Интервал по умолчанию config.webhook_config=Конфигурация Webhook -config.webhook.types=Types +config.webhook.types=Типы config.webhook.deliver_timeout=Deliver timeout -config.webhook.skip_tls_verify=Skip TLS verify +config.webhook.skip_tls_verify=Пропустить проверку TLS config.git_config=Конфигурация GIT config.git.disable_diff_highlight=Disable diff syntax highlight config.git.max_diff_lines=Diff lines limit (for a single file) config.git.max_diff_line_characters=Diff characters limit (for a single line) config.git.max_diff_files=Diff files limit (for a single diff) -config.git.gc_args=GC arguments +config.git.gc_args=Аргументы GC config.git.migrate_timeout=Migration timeout config.git.mirror_timeout=Mirror fetch timeout config.git.clone_timeout=Clone timeout config.git.pull_timeout=Pull timeout config.git.gc_timeout=GC timeout -config.lfs_config=LFS configuration -config.lfs.storage=Storage -config.lfs.objects_path=Objects path +config.lfs_config=Конфигурация LFS +config.lfs.storage=Хранилище +config.lfs.objects_path=Путь к объектам config.log_config=Конфигурация журнала config.log_file_root_path=Путь до папки с логами @@ -1409,7 +1417,7 @@ months=%d месяцев %s years=%d лет %s raw_seconds=секунд raw_minutes=минут -raw_hours=hours +raw_hours=ч. [dropzone] default_message=Перетащите файл сюда, или кликните для загрузки. diff --git a/conf/locale/locale_sk-SK.ini b/conf/locale/locale_sk-SK.ini index d92005147..d6b7ea032 100644 --- a/conf/locale/locale_sk-SK.ini +++ b/conf/locale/locale_sk-SK.ini @@ -51,13 +51,14 @@ internal_server_error=Internal Server Error install=Inštalácia title=Postup prvotnej inštalácie docker_helper=Ak spúšťate Gogs pod Docker platformou, prečítajte si prosím pozorne Pokyny skôr, ako zmeníte niečo na tejto stránke! -requite_db_desc=Gogs vyžaduje MySQL, PostgreSQL, SQLite3, MSSQL alebo TiDB. +requite_db_desc=Gogs requires MySQL, PostgreSQL, SQLite3 or TiDB (via MySQL protocol). db_title=Nastavenie databázy db_type=Typ databázy host=Host user=Používateľ password=Heslo db_name=Názov databázy +db_schema=Schema db_helper=Pre MySQL prosím použite INNODB engine so znakovou sadou utf8_general_ci. ssl_mode=SSL režim path=Cesta @@ -399,7 +400,9 @@ owner=Vlastník repo_name=Názov repozitára repo_name_helper=Dobrý názov repozitára sa zvyčajne skladá z krátkych, jedinečných a ľahko zapamätateľných kľúčových slov. visibility=Viditeľnosť +unlisted=Unlisted visiblity_helper=Tento repozitár je súkromný +unlisted_helper=This repository is Unlisted visiblity_helper_forced=Správca vynútil na všetkých nových repozitároch, aby boli súkromné visiblity_fork_helper=(Zmena tejto hodnoty ovplivní všetky repozitáre rozštiepenia) clone_helper=Potrebujete pomôcť z klonovaním? Navštívte nápovedu! @@ -440,6 +443,7 @@ migrate.clone_address_desc=Toto nemôže byť HTTP/HTTPS/GIT URL. migrate.clone_address_desc_import_local=Máte povolené preniesť repozitár pomocou lokálnej cesty na serveri. migrate.permission_denied=Nemáte povolené importovať miestne repozitáre. migrate.invalid_local_path=Neplatná miestna cesta, buď neexistuje alebo nie je adresárom. +migrate.clone_address_resolved_to_blocked_local_address=Clone address resolved to a local network address that is implicitly blocked. migrate.failed=Migrácia zlyhala: %v mirror_from=zrkadlo @@ -806,7 +810,7 @@ settings.webhook.headers=Hlavičky settings.webhook.payload=Payload settings.webhook.body=Telo settings.webhook.err_cannot_parse_payload_url=Cannot parse payload URL: %v -settings.webhook.err_cannot_use_local_addresses=Non admins are not allowed to use local addresses. +settings.webhook.url_resolved_to_blocked_local_address=Payload URL resolved to a local network address that is implicitly blocked. settings.githooks_desc=Háčiky Gitu sú spravované Gitom samotným, môžete v zozname nižšie upraviť súbory podporovaných háčikov k prevádzaniu užívateľských operácií. settings.githook_edit_desc=Pokiaľ je hook neaktívny, zobrazí sa ukážkový obsah. Ponechanie prázdneho obsahu zakáže tento hook. settings.githook_name=Názov hooku @@ -1202,6 +1206,7 @@ config.ssh.start_builtin_server=Start builtin server config.ssh.listen_host=Listen host config.ssh.listen_port=Listen port config.ssh.server_ciphers=Server ciphers +config.ssh.server_macs=Server MACs config.repo_config=Nastavenie repozitára config.repo.root_path=Root path @@ -1226,6 +1231,8 @@ config.db_config=Konfigurácia databázy config.db.type=Type config.db.host=Host config.db.name=Name +config.db.schema=Schema +config.db.schema_helper=(for "postgres" only) config.db.user=User config.db.ssl_mode=SSL mode config.db.ssl_mode_helper=(for "postgres" only) @@ -1242,6 +1249,7 @@ config.security.cookie_secure=Enable secure cookie config.security.reverse_proxy_auth_user=Reverse proxy authentication header config.security.enable_login_status_cookie=Enable login status cookie config.security.login_status_cookie_name=Login status cookie +config.security.local_network_allowlist=Local network allowlist config.email_config=Email configuration config.email.enabled=Enabled diff --git a/conf/locale/locale_sr-SP.ini b/conf/locale/locale_sr-SP.ini index c2778c75e..fdf7319ad 100644 --- a/conf/locale/locale_sr-SP.ini +++ b/conf/locale/locale_sr-SP.ini @@ -51,13 +51,14 @@ internal_server_error=Internal Server Error install=Инсталација title=Инсталационе кораке за првог покретања docker_helper=Ако покрећете Gogs унутар Docker, молимо прочитајте ове савете пажљиво пре него што сте било шта променили на овој страници! -requite_db_desc=Gogs захтева MySQL, PostgreSQL, SQLite3, MSSQL или TiDB. +requite_db_desc=Gogs requires MySQL, PostgreSQL, SQLite3 or TiDB (via MySQL protocol). db_title=Подешавања базе db_type=Тип базе података host=Домаћин user=Корисник password=Лозинка db_name=Назив базе података +db_schema=Schema db_helper=За MySQL користите тип табела InnoDB са кодирањем utf8_general_ci. ssl_mode=Режим SSL path=Пут @@ -399,7 +400,9 @@ owner=Власник repo_name=Име спремишта repo_name_helper=Најбоља имена су кратка и јединствена. visibility=Видљивост +unlisted=Unlisted visiblity_helper=Приватно спремиште +unlisted_helper=This repository is Unlisted visiblity_helper_forced=Сва нова спремишта су приватна по одлуци администратора. visiblity_fork_helper=(Промена ове вредности ће утицати на све гране) clone_helper=Потребна вам помоћ клонирањем? Посетите страницу Помоћ! @@ -440,6 +443,7 @@ migrate.clone_address_desc=Могуће је да буде једна HTTP/HTTPS migrate.clone_address_desc_import_local=Можете и да мигрирате спремиште користећи пут на локалном серверу. migrate.permission_denied=Немате права на увезете локално спремиште. migrate.invalid_local_path=Невашећи локални пут. Можда не постоји или није директоријум. +migrate.clone_address_resolved_to_blocked_local_address=Clone address resolved to a local network address that is implicitly blocked. migrate.failed=Миграција није успела: %v mirror_from=огледало од @@ -806,7 +810,7 @@ settings.webhook.headers=Наслови settings.webhook.payload=Садржај захтева settings.webhook.body=Тело settings.webhook.err_cannot_parse_payload_url=Cannot parse payload URL: %v -settings.webhook.err_cannot_use_local_addresses=Non admins are not allowed to use local addresses. +settings.webhook.url_resolved_to_blocked_local_address=Payload URL resolved to a local network address that is implicitly blocked. settings.githooks_desc=Git Hooks пружају Git сами по себи. Можете ажурирати датотеке са подржаним hooks са пратећег списка операције. settings.githook_edit_desc=Aко Webhook није активан, примерни садржај ће бити представљен. Ако оставите празно, Webhook ће бити онемогућен. settings.githook_name=Име Hook-а @@ -1202,6 +1206,7 @@ config.ssh.start_builtin_server=Start builtin server config.ssh.listen_host=Listen host config.ssh.listen_port=Listen port config.ssh.server_ciphers=Server ciphers +config.ssh.server_macs=Server MACs config.repo_config=Конфигурација спремишта config.repo.root_path=Root path @@ -1226,6 +1231,8 @@ config.db_config=Конфигурација базе података config.db.type=Type config.db.host=Host config.db.name=Name +config.db.schema=Schema +config.db.schema_helper=(for "postgres" only) config.db.user=User config.db.ssl_mode=SSL mode config.db.ssl_mode_helper=(for "postgres" only) @@ -1242,6 +1249,7 @@ config.security.cookie_secure=Enable secure cookie config.security.reverse_proxy_auth_user=Reverse proxy authentication header config.security.enable_login_status_cookie=Enable login status cookie config.security.login_status_cookie_name=Login status cookie +config.security.local_network_allowlist=Local network allowlist config.email_config=Email configuration config.email.enabled=Enabled diff --git a/conf/locale/locale_sv-SE.ini b/conf/locale/locale_sv-SE.ini index b97c7cb82..654d92047 100644 --- a/conf/locale/locale_sv-SE.ini +++ b/conf/locale/locale_sv-SE.ini @@ -51,13 +51,14 @@ internal_server_error=Internal Server Error install=Installation title=Steg för att installera för första gången docker_helper=Om du kör Gogs inuti Docker, vänligen läs Riktninjerna nogrant innan du ändrar någonting på denna sida! -requite_db_desc=Gogs kräver MySQL, PostgreSQL, SQLite3, MSSQL eller TiDB. +requite_db_desc=Gogs requires MySQL, PostgreSQL, SQLite3 or TiDB (via MySQL protocol). db_title=Databasinställningar db_type=Databastyp host=Server user=Användare password=Lösenord db_name=Databasens namn +db_schema=Schema db_helper=Se till att i MySQL använda INNODB med teckenuppsättningen utf8_general_ci. ssl_mode=SSL-läge path=Filväg @@ -399,7 +400,9 @@ owner=Ägare repo_name=Utvecklingskatalogens namn repo_name_helper=Ett bra utvecklingskatalogsnamn består vanligtvis av korta, minnesvärda och unika nyckelord. visibility=Synligt för +unlisted=Unlisted visiblity_helper=Denna utvecklingskatalog är Privat +unlisted_helper=This repository is Unlisted visiblity_helper_forced=Administratören har tvingat alla nya utvecklingskataloger att vara Privata visiblity_fork_helper=(Ändring av detta värde kommer att påverka alla forks) clone_helper=Behöver du hjälp med kloning? Gå till Hjälp! @@ -440,6 +443,7 @@ migrate.clone_address_desc=This can be a HTTP/HTTPS/GIT URL. migrate.clone_address_desc_import_local=You're also allowed to migrate a repository by local server path. migrate.permission_denied=Du får inte importera lokala repon. migrate.invalid_local_path=Ogiltig lokal sökväg, den finns inte eller är inte en katalog. +migrate.clone_address_resolved_to_blocked_local_address=Clone address resolved to a local network address that is implicitly blocked. migrate.failed=Migrering misslyckades: %v mirror_from=spegling av @@ -806,7 +810,7 @@ settings.webhook.headers=Huvuden settings.webhook.payload=Nyttolast settings.webhook.body=Innehåll settings.webhook.err_cannot_parse_payload_url=Cannot parse payload URL: %v -settings.webhook.err_cannot_use_local_addresses=Non admins are not allowed to use local addresses. +settings.webhook.url_resolved_to_blocked_local_address=Payload URL resolved to a local network address that is implicitly blocked. settings.githooks_desc=Git-krokar är en del av Git själv. För att utföra anpassade operationer kan du redigera filerna för de krokar som stöds i listan nedan. settings.githook_edit_desc=Om kroken är inaktiv visas exempelinnehåll. Inaktivera denna krok genom att lämna innehållet tomt. settings.githook_name=Kroknamn @@ -1202,6 +1206,7 @@ config.ssh.start_builtin_server=Start builtin server config.ssh.listen_host=Listen host config.ssh.listen_port=Listen port config.ssh.server_ciphers=Server ciphers +config.ssh.server_macs=Server MACs config.repo_config=Repository configuration config.repo.root_path=Root path @@ -1226,6 +1231,8 @@ config.db_config=Databaskonfiguration config.db.type=Type config.db.host=Host config.db.name=Name +config.db.schema=Schema +config.db.schema_helper=(for "postgres" only) config.db.user=User config.db.ssl_mode=SSL mode config.db.ssl_mode_helper=(for "postgres" only) @@ -1242,6 +1249,7 @@ config.security.cookie_secure=Enable secure cookie config.security.reverse_proxy_auth_user=Reverse proxy authentication header config.security.enable_login_status_cookie=Enable login status cookie config.security.login_status_cookie_name=Login status cookie +config.security.local_network_allowlist=Local network allowlist config.email_config=Email configuration config.email.enabled=Enabled diff --git a/conf/locale/locale_tr-TR.ini b/conf/locale/locale_tr-TR.ini index 9e02e2889..e8324b345 100644 --- a/conf/locale/locale_tr-TR.ini +++ b/conf/locale/locale_tr-TR.ini @@ -44,20 +44,21 @@ issues=Sorunlar cancel=İptal [status] -page_not_found=Page Not Found -internal_server_error=Internal Server Error +page_not_found=Sayfa Bulunamadı +internal_server_error=İç Sunucu Hatası. [install] install=Kurulum title=İlk Kez Çalıştırma İçin Kurulum Adımları docker_helper=Gogs'u Docker içinde kullanıyorsanız bu sayfada herhangi bir değişiklik yapmadan önce lütfen kılavuzu dikkatlice okuyunuz! -requite_db_desc=Gogs MySQL, PostgreSQL, SQLite3, MSSQL veya TiDB'ye ihtiyaç duyar. +requite_db_desc=Gogs requires MySQL, PostgreSQL, SQLite3 or TiDB (via MySQL protocol). db_title=Veritabanı Ayarları db_type=Veritabanı Türü host=Sunucu user=Kullanıcı password=Parola db_name=Veritabanı Adı +db_schema=Schema db_helper=Lütfen MySQL için INNODB motorunu utf8_general_ci karakter setiyle kullanın. ssl_mode=SSL Biçimi path=Yol @@ -263,7 +264,7 @@ following=Takip Edilenler follow=Takip Et unfollow=Takibi Bırak -form.name_not_allowed=User name or pattern %q is not allowed. +form.name_not_allowed=Kullanıcı adı veya %q desenine izin verilmiyor. [settings] profile=Profil @@ -399,7 +400,9 @@ owner=Sahibi repo_name=Depo İsmi repo_name_helper=İyi bir depo ismi genellikle kısa, akılda kalıcı ve benzersiz kelimelerden oluşur. visibility=Görünürlük +unlisted=Unlisted visiblity_helper=Bu depo Özel +unlisted_helper=This repository is Unlisted visiblity_helper_forced=Site yöneticisi tüm depolara erişimleri Özel olarak ayarlamaya zorladı visiblity_fork_helper=(Bu değerin değişmesi tüm çatallamaları etkileyecektir) clone_helper=Klonlama konusunda yardıma mı ihtiyacınız var? Yardım bağlantısını ziyaret edin! @@ -429,7 +432,7 @@ repo_description_helper=Depo açıklaması. Maksimum 512 karakter uzunluğu. repo_description_length=Mevcut karakterler form.reach_limit_of_creation=Sahip, maksimum %d depo oluşturma limitine ulaşmıştır. -form.name_not_allowed=Repository name or pattern %q is not allowed. +form.name_not_allowed=Depo adı veya %q desenine izin verilmiyor. need_auth=Yetkilendirme Gereklidir migrate_type=Göç Türü @@ -440,6 +443,7 @@ migrate.clone_address_desc=Bu HTTP/HTTPS/GIT URL'si olabilir. migrate.clone_address_desc_import_local=Bir depoyu yerel sunucu yolu ile taşımanıza izin verilir. migrate.permission_denied=Yerel depoları içeri aktarma izniniz yok. migrate.invalid_local_path=Geçersiz yerel dizin! Böyle bir yol yok ya da bir dizin değil. +migrate.clone_address_resolved_to_blocked_local_address=Clone address resolved to a local network address that is implicitly blocked. migrate.failed=Göç başarısız: %v mirror_from=şunun yansıması @@ -789,8 +793,8 @@ settings.remove_collaborator_success=Katkıcı silindi. settings.search_user_placeholder=Kullanıcı ara... settings.org_not_allowed_to_be_collaborator=Organizasyon, bir katkıcı olarak eklenemez. settings.hooks_desc=Web istekleri, HTTP POST olay tetikleyicileri gibidirler. Gogs'ta ne zaman bir şey olsa, hedef belirttiğiniz sunuculara bildirim yapabilecek duruma geliriz. Daha fazla bilgiyi Web İstekleri Kılavuzu'nda bulabilirsiniz. -settings.webhooks.add_new=Add a new webhook: -settings.webhooks.choose_a_type=Choose a type... +settings.webhooks.add_new=Yeni bir web istemci ekle: +settings.webhooks.choose_a_type=Bir tür seç... settings.add_webhook=Web İsteği Ekle settings.webhook_deletion=Web İsteğini Sil settings.webhook_deletion_desc=Bu web isteğini silerseniz buna bağlı olan tüm bilgiler ve dağıtım geçmişi de silinecektir. Devam etmek istiyor musunuz? @@ -805,8 +809,8 @@ settings.webhook.response=Cevaplar settings.webhook.headers=Başlıklar settings.webhook.payload=Yükler settings.webhook.body=Gövde -settings.webhook.err_cannot_parse_payload_url=Cannot parse payload URL: %v -settings.webhook.err_cannot_use_local_addresses=Non admins are not allowed to use local addresses. +settings.webhook.err_cannot_parse_payload_url=Yük URL'si ayrıştırılamıyor: %v +settings.webhook.url_resolved_to_blocked_local_address=Payload URL resolved to a local network address that is implicitly blocked. settings.githooks_desc=Git istekleri, Git'in kendisi tarafından güçlendirilmiştir. Özel işlemleri gerçekleştirmek için aşağıdaki listedeki desteklenen isteklerin dosyalarını düzenleyebilirsiniz. settings.githook_edit_desc=İstek aktif değilse örnek içerik sunulacaktır. İçeriği boş bırakmak, isteği devre dışı bırakmayı beraberinde getirecektir. settings.githook_name=İstek İsmi @@ -933,8 +937,8 @@ team_name_helper=Sohbetlerde bu takımdan bahsetmek için bu ismi kullanacaksın team_desc_helper=Bu takım ne hakkında? team_permission_desc=Bu takım, ne gibi bir izin seviyesine sahiptir? -form.name_not_allowed=Organization name or pattern %q is not allowed. -form.team_name_not_allowed=Team name or pattern %q is not allowed. +form.name_not_allowed=Organizasyon adı veya %q desenine izin verilmiyor. +form.team_name_not_allowed=Takım adı veya %q desenine izin verilmiyor. settings=Ayarlar settings.options=Seçenekler @@ -1018,7 +1022,7 @@ dashboard.system_status=Sistem İzleme Durumu dashboard.statistic_info=Gogs veritabanında %d kullanıcı, %d organizasyon, %d genel anahtar, %d depo, %d izleme, %d yıldız, %d hareket, %d erişim, %d sorun, %d yorum, %d sosyal hesap, %d takip, %d yansı, %d sürüm, %d giriş kaynağı, %d web isteği, %d kilometre taşı, %d etiket, %d istek görevi, %d takım, %d güncellenmiş görev, %d ek var. dashboard.operation_name=İşlem Adı dashboard.operation_switch=Geç -dashboard.select_operation_to_run=Please select operation to run +dashboard.select_operation_to_run=Lütfen çalıştırılacak işlemi seçin dashboard.operation_run=Çalıştır dashboard.clean_unbind_oauth=Bağlanmamış OAuth'ları Temizle dashboard.clean_unbind_oauth_success=Bağlanmamış tüm OAuth'lar başarıyla silindi. @@ -1202,6 +1206,7 @@ config.ssh.start_builtin_server=Yerleşik sunucuyu başlat config.ssh.listen_host=Ana makineyi dinle config.ssh.listen_port=Port'u dinle config.ssh.server_ciphers=Sunucu şifreleri +config.ssh.server_macs=Server MACs config.repo_config=Depo Yapılandırması config.repo.root_path=Kök yolu @@ -1214,49 +1219,52 @@ config.repo.disable_http_git=HTTP Git'i devre dışı bırak config.repo.enable_local_path_migration=Yerel yol göçünü etkinleştir config.repo.enable_raw_file_render_mode=Ham dosya oluşturma modunu etkinleştir config.repo.commits_fetch_concurrency=İşlemeler eşzamanlılık getirir -config.repo.editor.line_wrap_extensions=Editor line wrap extensions -config.repo.editor.previewable_file_modes=Editor previewable file modes -config.repo.upload.enabled=Upload enabled -config.repo.upload.temp_path=Upload temporary path -config.repo.upload.allowed_types=Upload allowed types -config.repo.upload.file_max_size=Upload file size limit -config.repo.upload.max_files=Upload files limit +config.repo.editor.line_wrap_extensions=Düzenleyici satır kaydırma eklentileri +config.repo.editor.previewable_file_modes=Düzenleyici önizlenebilir dosya modları +config.repo.upload.enabled=Yükleme etkinleştirildi +config.repo.upload.temp_path=Yükleme geçici yolu +config.repo.upload.allowed_types=Yükleme kabul edilebilir türleri +config.repo.upload.file_max_size=Yükleme dosya boyutu sınırı +config.repo.upload.max_files=Yükleme dosya sınırı config.db_config=Veritabanı Yapılandırması -config.db.type=Type -config.db.host=Host -config.db.name=Name -config.db.user=User -config.db.ssl_mode=SSL mode -config.db.ssl_mode_helper=(for "postgres" only) -config.db.path=Path -config.db.path_helper=(for "sqlite3"only) -config.db.max_open_conns=Maximum open connections -config.db.max_idle_conns=Maximum idle connections +config.db.type=Tür +config.db.host=Sunucu +config.db.name=Ad +config.db.schema=Schema +config.db.schema_helper=(for "postgres" only) +config.db.user=Kullanıcı +config.db.ssl_mode=SSL modu +config.db.ssl_mode_helper=(sadece "postgres" için) +config.db.path=Yol +config.db.path_helper=(sadece "sqlite3" için) +config.db.max_open_conns=En fazla açık bağlantı +config.db.max_idle_conns=En fazla boş bağlantı -config.security_config=Security configuration -config.security.login_remember_days=Login remember days -config.security.cookie_remember_name=Remember cookie -config.security.cookie_username=Username cookie -config.security.cookie_secure=Enable secure cookie -config.security.reverse_proxy_auth_user=Reverse proxy authentication header -config.security.enable_login_status_cookie=Enable login status cookie -config.security.login_status_cookie_name=Login status cookie +config.security_config=Güvenlik yapılandırması +config.security.login_remember_days=Giriş günlerini hatırla +config.security.cookie_remember_name=Çerezi hatırla +config.security.cookie_username=Kullanıcı adı çerezi +config.security.cookie_secure=Güvenli çerezi etkinleştir +config.security.reverse_proxy_auth_user=Ters proxy kimlik doğrulama başlığı +config.security.enable_login_status_cookie=Giriş durumu çerezini etkinleştir +config.security.login_status_cookie_name=Giriş durumu çerezi +config.security.local_network_allowlist=Local network allowlist -config.email_config=Email configuration -config.email.enabled=Enabled -config.email.subject_prefix=Subject prefix -config.email.host=Host -config.email.from=From -config.email.user=User -config.email.disable_helo=Disable HELO -config.email.helo_hostname=HELO hostname -config.email.skip_verify=Skip certificate verify -config.email.use_certificate=Use custom certificate -config.email.cert_file=Certificate file -config.email.key_file=Key file -config.email.use_plain_text=Use plain text -config.email.add_plain_text_alt=Add plain text alternative +config.email_config=E-Posta yapılandırması +config.email.enabled=Etkin +config.email.subject_prefix=Konu öneki +config.email.host=Sunucu +config.email.from=Kimden +config.email.user=Kullanıcı +config.email.disable_helo=HELO'yu Devre Dışı Bırak +config.email.helo_hostname=HELO sunucu adı +config.email.skip_verify=Sertifika doğrulamayı atla +config.email.use_certificate=Özel sertifika kullan +config.email.cert_file=Sertifika dosyası +config.email.key_file=Anahtar dosyası +config.email.use_plain_text=Düz metin kullan +config.email.add_plain_text_alt=Düz metin alternatifi ekle config.email.send_test_mail=Send test email config.email.test_mail_failed=Failed to send test email to '%s': %v config.email.test_mail_sent=Test email has been sent to '%s'. @@ -1324,17 +1332,17 @@ config.git_config=Git Yapılandırması config.git.disable_diff_highlight=Disable diff syntax highlight config.git.max_diff_lines=Diff lines limit (for a single file) config.git.max_diff_line_characters=Diff characters limit (for a single line) -config.git.max_diff_files=Diff files limit (for a single diff) -config.git.gc_args=GC arguments -config.git.migrate_timeout=Migration timeout -config.git.mirror_timeout=Mirror fetch timeout -config.git.clone_timeout=Clone timeout -config.git.pull_timeout=Pull timeout -config.git.gc_timeout=GC timeout +config.git.max_diff_files=Farklı dosya sınırı (tek bir fark için) +config.git.gc_args=GC değişkenleri +config.git.migrate_timeout=Göç zaman aşımı +config.git.mirror_timeout=Yansı getirme zaman aşımı +config.git.clone_timeout=Klon zaman aşımı +config.git.pull_timeout=Çekme zaman aşımı +config.git.gc_timeout=GC zaman aşımı -config.lfs_config=LFS configuration -config.lfs.storage=Storage -config.lfs.objects_path=Objects path +config.lfs_config=LFS yapılandırması +config.lfs.storage=Depolama +config.lfs.objects_path=Nesnelerin yolu config.log_config=Log Yapılandırması config.log_file_root_path=Log Dosyası Kök Yolu @@ -1409,7 +1417,7 @@ months=%d ay %s years=%d yıl %s raw_seconds=saniyeler raw_minutes=dakikalar -raw_hours=hours +raw_hours=saat [dropzone] default_message=Dosyaları yüklemek için sürükleyin veya tıklayın. diff --git a/conf/locale/locale_uk-UA.ini b/conf/locale/locale_uk-UA.ini index 8e9e19431..f094e27bf 100644 --- a/conf/locale/locale_uk-UA.ini +++ b/conf/locale/locale_uk-UA.ini @@ -44,20 +44,21 @@ issues=Проблеми cancel=Скасувати [status] -page_not_found=Page Not Found -internal_server_error=Internal Server Error +page_not_found=Сторінку не знайдено +internal_server_error=Внутрішня помилка серверу [install] install=Установка title=Кроки установки перед першим запуском docker_helper=Якщо ви запускаєте Gogs всередені Docker, уважно прочитайте гайдлайни перш ніж змінювати щось! -requite_db_desc=Gogs потребує наявності MySQL, PostgreSQL, SQLite3, MSSQL або TiDB. +requite_db_desc=Gogs requires MySQL, PostgreSQL, SQLite3 or TiDB (via MySQL protocol). db_title=Налаштування бази даних db_type=Тип бази данних host=Хост user=Користувач password=Пароль db_name=Ім'я бази даних +db_schema=Schema db_helper=Будь ласка, використовуйте MySQL як INNODB з таблицею символів utf8_general_ci. ssl_mode=Режим SSL path=Шлях @@ -125,7 +126,7 @@ run_user_not_match=Користувач, що здійснює запуск, н smtp_host_missing_port=В адресі SMTP-хосту не вистачає порту. invalid_smtp_from=Невалідне SMTP поле Від: %v save_config_failed=Не в змозі зберегти конфігурацію: %v -init_failed=Failed to initialize application: %v +init_failed=Не вдалося ініціалізувати додаток: %v invalid_admin_setting=Неприпустимі налаштування облікового запису адміністратора: %v install_success=Вітаємо! Ми раді, що ви обрали Gogs, отримуйте задоволення і будьте обережні. invalid_log_root_path=Шлях до лог файлу хибний: %v @@ -263,7 +264,7 @@ following=Слідкувати follow=Підписатися unfollow=Відписатися -form.name_not_allowed=User name or pattern %q is not allowed. +form.name_not_allowed=Ім'я користувача чи шаблон %q не допускаються. [settings] profile=Профіль @@ -399,7 +400,9 @@ owner=Власник repo_name=Назва репозиторію repo_name_helper=Гарна назва репозиторія зазвичай складається з коротких та унікальних ключових слів, які легко запам'ятати. visibility=Видимість +unlisted=Unlisted visiblity_helper=Цей репозиторій є Приватним +unlisted_helper=This repository is Unlisted visiblity_helper_forced=Усі нові репозиторії є Приватними згідно налаштувань адміністратора сайту visiblity_fork_helper=(Зміна даного значення вплине на всі відгалуження) clone_helper=Потрібна допомога у клонуванні? Відвідайте допомогу! @@ -429,7 +432,7 @@ repo_description_helper=Опис репозиторію. До 512-ти симв repo_description_length=Доступні символи form.reach_limit_of_creation=Власник досягнув максимальної кількості у %d створених репозиторіїв. -form.name_not_allowed=Repository name or pattern %q is not allowed. +form.name_not_allowed=Назва репозиторію або шаблон %q не допоскаються. need_auth=Потрібна авторизація migrate_type=Тип міграції @@ -440,6 +443,7 @@ migrate.clone_address_desc=Це може бути URL-адресою HTTP, HTTPS migrate.clone_address_desc_import_local=Ви також можете змігрувати репозиторій з локального шляху на сервері. migrate.permission_denied=Вам не дозволено імпортувати локальні репозиторії. migrate.invalid_local_path=Невірний локальний шлях, він не існує або не є каталогом. +migrate.clone_address_resolved_to_blocked_local_address=Clone address resolved to a local network address that is implicitly blocked. migrate.failed=Перенесення не вдалось: %v mirror_from=дзеркало @@ -789,8 +793,8 @@ settings.remove_collaborator_success=Співавтора було видале settings.search_user_placeholder=Пошук користувача... settings.org_not_allowed_to_be_collaborator=Організації не можуть бути додані як співавтори. settings.hooks_desc=Web-хуки схожі на HTTP POST тригери подій. Яка б подія не виникла в Gogs, ми можемо обробити повідомлення про неї на сторонньому хості який ви задаєте. Взнайте більше у Webhooks Guide. -settings.webhooks.add_new=Add a new webhook: -settings.webhooks.choose_a_type=Choose a type... +settings.webhooks.add_new=Додати новий веб-хук: +settings.webhooks.choose_a_type=Обрати тип... settings.add_webhook=Додати Webhook settings.webhook_deletion=Видалити Webhook settings.webhook_deletion_desc=Видалення цього web-хуку призведе до видалення інформації про нього та усієї історії поставок. Впевнені, що бажаєте продовжити? @@ -805,8 +809,8 @@ settings.webhook.response=Відповідь settings.webhook.headers=Заголовки settings.webhook.payload=Зміст settings.webhook.body=Тіло -settings.webhook.err_cannot_parse_payload_url=Cannot parse payload URL: %v -settings.webhook.err_cannot_use_local_addresses=Non admins are not allowed to use local addresses. +settings.webhook.err_cannot_parse_payload_url=Неможливо розібрати payload URL: %v +settings.webhook.url_resolved_to_blocked_local_address=Payload URL resolved to a local network address that is implicitly blocked. settings.githooks_desc=Git хуки керуються самим Git, ви можете редагувати файли хуків, що підтримуються згідно списку нище, щоб виконувати будь-які операції. settings.githook_edit_desc=Якщо хук неактивний, буде представлено зразок вмісту. Порожнє значення у цьому полі призведе до вимкнення хуку. settings.githook_name=Ім'я хуку @@ -933,8 +937,8 @@ team_name_helper=Ви будете використовувати це ім'я team_desc_helper=Що це за команда? team_permission_desc=Який рівень дозволів має бути у цієї команди? -form.name_not_allowed=Organization name or pattern %q is not allowed. -form.team_name_not_allowed=Team name or pattern %q is not allowed. +form.name_not_allowed=Назва організації чи паттерн %q, не дозволені. +form.team_name_not_allowed=Назва команди або шаблон %q не допоскаються. settings=Налаштування settings.options=Опції @@ -1006,19 +1010,19 @@ first_page=Перша last_page=Остання total=Всього: %d -dashboard.build_info=Build Information -dashboard.app_ver=Application version -dashboard.git_version=Git version -dashboard.go_version=Go version -dashboard.build_time=Build time -dashboard.build_commit=Build commit +dashboard.build_info=Інформація про збірку +dashboard.app_ver=Версія програми +dashboard.git_version=Версія Git +dashboard.go_version=Версія Go +dashboard.build_time=Дата збірки +dashboard.build_commit=Створити коміт dashboard.statistic=Статистика dashboard.operations=Операції dashboard.system_status=Статус системного монітору dashboard.statistic_info=База даних Gogs має %d користувачів, %d організацій, %d публічних ключів, %d репозиторіїв, %d спостерігачів, %d зірок, %d дій, %d відвідувань, %d обговорень, %d коментарів, %d соціальних облікових записів, %d підписників, %d дзеркал, %d релізів, %d джерел входу, %d webhook-ів, %d етапів, %d міток, %d hook задач, %d команд, %d оновлень завдань, %d вкладень. dashboard.operation_name=Назва операції dashboard.operation_switch=Перемикнути -dashboard.select_operation_to_run=Please select operation to run +dashboard.select_operation_to_run=Будь ласка, виберіть операцію, щоб запустити dashboard.operation_run=Запустити dashboard.clean_unbind_oauth=Видалити неприв'язані OAuth dashboard.clean_unbind_oauth_success=Усі неприв'язані OAuth було знищено. @@ -1168,87 +1172,91 @@ auths.github_api_endpoint=Адреса API config.not_set=(не встановлено) config.server_config=Конфігурація сервера -config.brand_name=Brand name +config.brand_name=Назва бренду config.run_user=Запущено користувачем config.run_mode=Режим виконання -config.server.external_url=External URL -config.server.domain=Domain -config.server.protocol=Protocol -config.server.http_addr=HTTP address -config.server.http_port=HTTP port -config.server.cert_file=Certificate file -config.server.key_file=Key file -config.server.tls_min_version=Minimum TLS version -config.server.unix_socket_permission=Unix socket permission -config.server.local_root_url=Local root URL -config.server.offline_mode=Offline mode -config.server.disable_router_log=Disable router log -config.server.enable_gzip=Enable Gzip -config.server.app_data_path=Application data path -config.server.load_assets_from_disk=Load assets from disk +config.server.external_url=Зовнішній URL +config.server.domain=Домен +config.server.protocol=Протокол +config.server.http_addr=Адреса HTTP +config.server.http_port=Порт HTTP +config.server.cert_file=Файл сертифікату +config.server.key_file=Ключовий файл +config.server.tls_min_version=Мінімальна версія TLS +config.server.unix_socket_permission=Дозвіл Unix сокету +config.server.local_root_url=Локальний кореневий URL +config.server.offline_mode=Автономний режим +config.server.disable_router_log=Вимкнути журнал маршрутизатора +config.server.enable_gzip=Увімкнути Gzip +config.server.app_data_path=Шлях до даних додатку +config.server.load_assets_from_disk=Завантажити ресурси з диску config.server.landing_url=Landing URL config.ssh_config=Налаштування SSH -config.ssh.enabled=Enabled -config.ssh.domain=Exposed domain -config.ssh.port=Exposed port -config.ssh.root_path=Root path -config.ssh.keygen_path=Keygen path -config.ssh.key_test_path=Key test path -config.ssh.minimum_key_size_check=Minimum key size check -config.ssh.minimum_key_sizes=Minimum key sizes -config.ssh.rewrite_authorized_keys_at_start=Rewrite "authorized_keys" at start -config.ssh.start_builtin_server=Start builtin server -config.ssh.listen_host=Listen host -config.ssh.listen_port=Listen port +config.ssh.enabled=Увімкнено +config.ssh.domain=Виділений домен +config.ssh.port=Виділений порт +config.ssh.root_path=Шлях до кореня +config.ssh.keygen_path=Шлях до генератора ключа +config.ssh.key_test_path=Шлях до тестового ключа +config.ssh.minimum_key_size_check=Перевірка мінімального розміру ключа +config.ssh.minimum_key_sizes=Мінімальні розміри ключів +config.ssh.rewrite_authorized_keys_at_start=Переписати "authorized_keys" при запуску +config.ssh.start_builtin_server=Запустити вбудований сервер +config.ssh.listen_host=Слухати хост +config.ssh.listen_port=Слухати порт config.ssh.server_ciphers=Server ciphers +config.ssh.server_macs=Server MACs config.repo_config=Налаштування репозиторія -config.repo.root_path=Root path -config.repo.script_type=Script type -config.repo.ansi_chatset=ANSI charset -config.repo.force_private=Force private -config.repo.max_creation_limit=Max creation limit -config.repo.preferred_licenses=Preferred licenses -config.repo.disable_http_git=Disable HTTP Git -config.repo.enable_local_path_migration=Enable local path migration -config.repo.enable_raw_file_render_mode=Enable raw file render mode +config.repo.root_path=Кореневий шлях +config.repo.script_type=Тип скрипту +config.repo.ansi_chatset=Набір символів ANSI +config.repo.force_private=Примусово приватний +config.repo.max_creation_limit=Ліміт створень +config.repo.preferred_licenses=Бажані ліцензії +config.repo.disable_http_git=Вимкнути HTTP Git +config.repo.enable_local_path_migration=Увімкнути міграцію з локального шляху +config.repo.enable_raw_file_render_mode=Вмикає режим візуалізації неформатованого файлу config.repo.commits_fetch_concurrency=Commits fetch concurrency config.repo.editor.line_wrap_extensions=Editor line wrap extensions config.repo.editor.previewable_file_modes=Editor previewable file modes -config.repo.upload.enabled=Upload enabled -config.repo.upload.temp_path=Upload temporary path -config.repo.upload.allowed_types=Upload allowed types -config.repo.upload.file_max_size=Upload file size limit -config.repo.upload.max_files=Upload files limit +config.repo.upload.enabled=Вивантаження увімкнено +config.repo.upload.temp_path=Завантажити тимчасовий шлях +config.repo.upload.allowed_types=Дозволені типи вивантаження +config.repo.upload.file_max_size=Ліміт розміру файлу для вивантаження +config.repo.upload.max_files=Ліміт розміру файлу для вивантаження config.db_config=Налаштування бази даних -config.db.type=Type -config.db.host=Host -config.db.name=Name -config.db.user=User -config.db.ssl_mode=SSL mode -config.db.ssl_mode_helper=(for "postgres" only) -config.db.path=Path -config.db.path_helper=(for "sqlite3"only) -config.db.max_open_conns=Maximum open connections -config.db.max_idle_conns=Maximum idle connections +config.db.type=Тип +config.db.host=Хост +config.db.name=Ім'я +config.db.schema=Schema +config.db.schema_helper=(for "postgres" only) +config.db.user=Користувач +config.db.ssl_mode=Режим SSL +config.db.ssl_mode_helper=(тільки для "postgres") +config.db.path=Шлях +config.db.path_helper=(тільки для "sqlite3") +config.db.max_open_conns=Максимальна кількість відкритих з'єднань +config.db.max_idle_conns=Максимальна кількість бездіяльних з'єднань -config.security_config=Security configuration +config.security_config=Налаштування безпеки config.security.login_remember_days=Login remember days -config.security.cookie_remember_name=Remember cookie +config.security.cookie_remember_name=Запам'ятати куки config.security.cookie_username=Username cookie config.security.cookie_secure=Enable secure cookie config.security.reverse_proxy_auth_user=Reverse proxy authentication header config.security.enable_login_status_cookie=Enable login status cookie config.security.login_status_cookie_name=Login status cookie +config.security.local_network_allowlist=Local network allowlist -config.email_config=Email configuration -config.email.enabled=Enabled +config.email_config=Налаштування пошти +config.email.enabled=Увімкнено config.email.subject_prefix=Subject prefix -config.email.host=Host +config.email.host=Хост config.email.from=From -config.email.user=User +config.email.user=Користувач config.email.disable_helo=Disable HELO config.email.helo_hostname=HELO hostname config.email.skip_verify=Skip certificate verify @@ -1293,30 +1301,30 @@ config.http_config=Налаштування HTTP config.http.access_control_allow_origin=Access control allow origin config.attachment_config=Attachment configuration -config.attachment.enabled=Enabled -config.attachment.path=Path -config.attachment.allowed_types=Allowed types -config.attachment.max_size=Size limit -config.attachment.max_files=Files limit +config.attachment.enabled=Увімкнено +config.attachment.path=Шлях +config.attachment.allowed_types=Дозволені типи +config.attachment.max_size=Ліміт розміру +config.attachment.max_files=Ліміт файлів config.release_config=Release configuration -config.release.attachment.enabled=Attachment enabled -config.release.attachment.allowed_types=Attachment allowed types -config.release.attachment.max_size=Attachment size limit -config.release.attachment.max_files=Attachment files limit +config.release.attachment.enabled=Вкладення увімкнено +config.release.attachment.allowed_types=Дозволені типи вкладень +config.release.attachment.max_size=Ліміт розміру вкладення +config.release.attachment.max_files=Ліміт прикріплених файлів config.picture_config=Налаштування зображень -config.picture.avatar_upload_path=User avatar upload path -config.picture.repo_avatar_upload_path=Repository avatar upload path -config.picture.gravatar_source=Gravatar source -config.picture.disable_gravatar=Disable Gravatar -config.picture.enable_federated_avatar=Enable federated avatars +config.picture.avatar_upload_path=Шлях завантаження аватарок користувачем +config.picture.repo_avatar_upload_path=Шлях завантаження аватарок в репозиторії +config.picture.gravatar_source=Джерело граватарів +config.picture.disable_gravatar=Вимкнути граватари +config.picture.enable_federated_avatar=Включити федеративні аватарки -config.mirror_config=Mirror configuration -config.mirror.default_interval=Default interval +config.mirror_config=Налаштування дзеркала +config.mirror.default_interval=Інтервал за замовчуванням config.webhook_config=Налаштування web-хуків -config.webhook.types=Types +config.webhook.types=Типи config.webhook.deliver_timeout=Deliver timeout config.webhook.skip_tls_verify=Skip TLS verify @@ -1325,16 +1333,16 @@ config.git.disable_diff_highlight=Disable diff syntax highlight config.git.max_diff_lines=Diff lines limit (for a single file) config.git.max_diff_line_characters=Diff characters limit (for a single line) config.git.max_diff_files=Diff files limit (for a single diff) -config.git.gc_args=GC arguments +config.git.gc_args=Аргументи GC config.git.migrate_timeout=Migration timeout config.git.mirror_timeout=Mirror fetch timeout config.git.clone_timeout=Clone timeout config.git.pull_timeout=Pull timeout -config.git.gc_timeout=GC timeout +config.git.gc_timeout=Затримка GC -config.lfs_config=LFS configuration -config.lfs.storage=Storage -config.lfs.objects_path=Objects path +config.lfs_config=Налаштування LFS +config.lfs.storage=Сховище +config.lfs.objects_path=Шлях об'єктів config.log_config=Конфігурація журналу config.log_file_root_path=Повний шлях до Log-файлу @@ -1409,7 +1417,7 @@ months=%d місяців %s years=%d роки %s raw_seconds=секунди raw_minutes=хвилини -raw_hours=hours +raw_hours=години [dropzone] default_message=Перетягніть файли сюди або натисніть "завантажити". diff --git a/conf/locale/locale_vi-VN.ini b/conf/locale/locale_vi-VN.ini index b59d1d335..062639f40 100644 --- a/conf/locale/locale_vi-VN.ini +++ b/conf/locale/locale_vi-VN.ini @@ -44,20 +44,21 @@ issues=Các vấn đề cancel=Hủy bỏ [status] -page_not_found=Page Not Found -internal_server_error=Internal Server Error +page_not_found=Không tìm thấy trang này! +internal_server_error=Lỗi nội bộ máy chủ. [install] install=Cài đặt title=Cài đặt cho lần chạy đầu tiên docker_helper=Nếu bạn đang chạy Gogs bên trong Docker, xin vui lòng đọc hướng dẫn một cách cẩn thận, trước khi bạn thay đổi bất cứ điều gì trong trang này! -requite_db_desc=Gogs yêu cầu MySQL, PostgreSQL, SQLite3, MSSQL hoặc TiDB. +requite_db_desc=Gogs requires MySQL, PostgreSQL, SQLite3 or TiDB (via MySQL protocol). db_title=Cài đặt database db_type=Loại database host=Host user=User password=Mật khẩu db_name=Tên database +db_schema=Schema db_helper=Xin vui lòng sử dụng engine INNODB với utf8_general_ci charset cho MySQL. ssl_mode=Chế độ SSL path=Đường dẫn @@ -125,7 +126,7 @@ run_user_not_match=Người dùng đang chạy không phải là người dùng smtp_host_missing_port=SMTP host thiếu thông tin cổng ở địa chỉ. invalid_smtp_from=Trường SMTP không hợp lệ: %v save_config_failed=Lưu cấu hình thất bại: %v -init_failed=Failed to initialize application: %v +init_failed=Lỗi khởi tạo ứng dụng: %v invalid_admin_setting=Thiết lập tài khoản admin không hợp lệ: %v install_success=Chào mừng! Chúng tôi vui mừng vì bạn chọn Gogs, chúc bạn vui. invalid_log_root_path=Đường dẫn gốc cho Log không hợp lệ: %v @@ -235,7 +236,7 @@ org_name_been_taken=Tên tổ chức đã được sử dụng. team_name_been_taken=Tên nhóm đã được sử dụng. email_been_used=Email đã được sử dụng. username_password_incorrect=Tên đăng nhập hoặc mật khẩu không đúng. -auth_source_mismatch=The authentication source selected is not associated with the user. +auth_source_mismatch=Nguồn xác thực không liên kết đến người dùng. enterred_invalid_repo_name=Hãy chắc chắn tên kho đã nhập chính xác. enterred_invalid_owner_name=Please make sure that the owner name you entered is correct. enterred_invalid_password=Please make sure the that password you entered is correct. @@ -263,7 +264,7 @@ following=Đang theo dõi follow=Theo dõi unfollow=Bỏ theo dõi -form.name_not_allowed=User name or pattern %q is not allowed. +form.name_not_allowed=Tên người dùng %q là không được phép. [settings] profile=Hồ sơ @@ -354,7 +355,7 @@ two_factor_or_enter_secret=Hoặc nhập mã bí mật: two_factor_then_enter_passcode=Sau đó nhập mã: two_factor_verify=Xác minh two_factor_invalid_passcode=Mật mã mà bạn đã nhập không hợp lệ, hãy thử lại! -two_factor_reused_passcode=The passcode you entered has already been used, please try another one! +two_factor_reused_passcode=Mã bạn nhập đã được sử dụng, hãy nhập mã khác two_factor_enable_error=Kích hoạt xác thực 2 yếu tố không thành công: %v two_factor_enable_success=Xác thực 2 yếu tố đã kích hoạt cho tài khoản của bạn thành công! two_factor_recovery_codes_title=Mã khôi phục xác thực 2 yếu tố @@ -377,7 +378,7 @@ delete_token=Xóa access_token_deletion=Xóa mã truy cập cá nhân access_token_deletion_desc=Xóa mã quyền truy cập cá nhân sẽ loại bỏ tất cả liên quan đến truy cập của ứng dụng. Bạn có muốn tiếp tục? delete_token_success=Mã truy cập cá nhân đã được loại bỏ thành công! Đừng quên để cập nhật ứng dụng của bạn. -token_name_exists=Token with same name already exists. +token_name_exists=Token cùng tên đã tồn tại orgs.none=Bạn không là thành viên của bất kỳ tổ chức nào. orgs.leave_title=Rời khỏi tổ chức @@ -399,7 +400,9 @@ owner=Chủ sở hữu repo_name=Tên kho repo_name_helper=Một tên kho tốt thường bao gồm các từ khoá ngắn, đáng nhớ và độc đáo. visibility=Hiển thị +unlisted=Unlisted visiblity_helper=Kho lưu trữ này là riêng tư +unlisted_helper=This repository is Unlisted visiblity_helper_forced=Trang web quản trị đã buộc tất cả các kho phần mềm mới được riêng tư visiblity_fork_helper=(Thay đổi giá trị này sẽ ảnh hưởng đến tất cả forks) clone_helper=Cần giúp đỡ clone? Ghé thăm trợ giúp! @@ -425,11 +428,11 @@ mirror_last_synced=Lần đồng bộ cuối watchers=Người theo dõi stargazers=Stargazers forks=Forks -repo_description_helper=Description of repository. Maximum 512 characters length. -repo_description_length=Available characters +repo_description_helper=Mô tả Reoisitory. Tối đa 512 ký tự +repo_description_length=Ký tự cho phép form.reach_limit_of_creation=Chủ sở hữu đã đạt giới hạn tối đa %d kho. -form.name_not_allowed=Repository name or pattern %q is not allowed. +form.name_not_allowed=Tên Repository %q là không hợp lệ need_auth=Cần xác thực Ủy quyền migrate_type=Migration Type @@ -440,6 +443,7 @@ migrate.clone_address_desc=This can be a HTTP/HTTPS/GIT URL. migrate.clone_address_desc_import_local=You're also allowed to migrate a repository by local server path. migrate.permission_denied=You are not allowed to import local repositories. migrate.invalid_local_path=Invalid local path, it does not exist or not a directory. +migrate.clone_address_resolved_to_blocked_local_address=Clone address resolved to a local network address that is implicitly blocked. migrate.failed=Migration failed: %v mirror_from=mirror of @@ -523,7 +527,7 @@ editor.file_changed_while_editing=File content has been changed since you starte editor.file_already_exists=Tên tập tin '%s' đã tồn tại trong kho này. editor.no_changes_to_show=Không có thay đổi nào. editor.fail_to_update_file=Failed to update/create file '%s' with error: %v -editor.fail_to_delete_file=Failed to delete file '%s' with error: %v +editor.fail_to_delete_file=Lỗi không xóa được file '%s' : %v editor.add_subdir=Thêm thư mục con... editor.unable_to_upload_files=Failed to upload files to '%s' with error: %v editor.upload_files_to_dir=Tải tập tin đến '%s' @@ -644,7 +648,7 @@ pulls.cannot_auto_merge_desc=Yêu cầu kéo này không thể được kết h pulls.cannot_auto_merge_helper=Xin vui lòng nhập theo cách thủ công để giải quyết các cuộc xung đột. pulls.create_merge_commit=Tạo một merge commit pulls.rebase_before_merging=Rebase trước khi sáp nhập -pulls.commit_description=Commit Description +pulls.commit_description=Mô tả commit pulls.merge_pull_request=Merge Pull Request pulls.open_unmerged_pull_exists=' Bạn không thể thực hiện thao tác reopen vì đã có một yêu cầu kéo đang mở (#%d) từ kho lưu trữ cùng với cùng một kết hợp thông tin và chờ đợi cho việc sáp nhập.' pulls.delete_branch=Xóa nhánh @@ -789,8 +793,8 @@ settings.remove_collaborator_success=Cộng tác viên đã được gỡ bỏ. settings.search_user_placeholder=Tìm kiếm người dùng... settings.org_not_allowed_to_be_collaborator=Tổ chức không được phép được thêm vào như là một cộng tác viên. settings.hooks_desc=Webhooks nhiều như cơ bản HTTP bài sự kiện gây nên. Bất cứ khi nào một cái gì đó xảy ra tại Gogs, chúng tôi sẽ xử lý thông báo máy chủ mục tiêu mà bạn chỉ định. Tìm hiểu thêm trong này Webhooks hướng dẫn. -settings.webhooks.add_new=Add a new webhook: -settings.webhooks.choose_a_type=Choose a type... +settings.webhooks.add_new=Thêm webhook mới: +settings.webhooks.choose_a_type=Chọn kiểu... settings.add_webhook=Thêm Webhook settings.webhook_deletion=Xóa Webhook settings.webhook_deletion_desc=Xóa bỏ điều này webhook sẽ loại bỏ tất cả phân phối lịch sử và thông tin của nó. Bạn có muốn tiếp tục? @@ -806,7 +810,7 @@ settings.webhook.headers=Tiêu đề settings.webhook.payload=Trả phí settings.webhook.body=Nội dung settings.webhook.err_cannot_parse_payload_url=Cannot parse payload URL: %v -settings.webhook.err_cannot_use_local_addresses=Non admins are not allowed to use local addresses. +settings.webhook.url_resolved_to_blocked_local_address=Payload URL resolved to a local network address that is implicitly blocked. settings.githooks_desc=Git Hooks are powered by Git itself, you can edit files of supported hooks in the list below to perform custom operations. settings.githook_edit_desc=If the hook is inactive, sample content will be presented. Leaving content to an empty value will disable this hook. settings.githook_name=Tên Hook @@ -867,8 +871,8 @@ settings.add_key_success=Bộ nhớ heap đã được phát hành! settings.deploy_key_deletion=Xóa Khóa triển khai settings.deploy_key_deletion_desc=Xóa bỏ điều này triển khai các phím sẽ loại bỏ tất cả liên quan đến truy cập cho các kho lưu trữ này. Bạn có muốn tiếp tục? settings.deploy_key_deletion_success=Deploy key has been deleted successfully! -settings.description_desc=Description of repository. Maximum 512 characters length. -settings.description_length=Available characters +settings.description_desc=Mô tả kho. Tối đa 512 ký tự +settings.description_length=Ký tự cho phép diff.browse_source=Browse Source diff.parent=mục cha @@ -933,8 +937,8 @@ team_name_helper=Bạn sẽ sử dụng tên này đề cập đến nhóm này team_desc_helper=Thông tin về nhóm này là gì? team_permission_desc=Cấp độ quyền nhóm này có? -form.name_not_allowed=Organization name or pattern %q is not allowed. -form.team_name_not_allowed=Team name or pattern %q is not allowed. +form.name_not_allowed=Tên tổ chức %q là không hợp lệ. +form.team_name_not_allowed=Tên nhóm %q là không hợp lệ settings=Các cài đặt settings.options=Tuỳ chọn @@ -1007,9 +1011,9 @@ last_page=Cuối total=Tổng: %d dashboard.build_info=Build Information -dashboard.app_ver=Application version -dashboard.git_version=Git version -dashboard.go_version=Go version +dashboard.app_ver=Phiên bản phần mềm +dashboard.git_version=Phiên bản Git +dashboard.go_version=Phiên bản Go dashboard.build_time=Build time dashboard.build_commit=Build commit dashboard.statistic=Thống kê @@ -1110,12 +1114,12 @@ repos.stars=Sao repos.issues=Các vấn đề repos.size=Kích cỡ -auths.auth_sources=Authentication Sources +auths.auth_sources=Nguồn xác thực auths.new=Thêm mới source auths.name=Tên auths.type=Loại auths.enabled=Đã kích hoạt -auths.default=Default +auths.default=Mặc định auths.updated=Đã cập nhật auths.auth_type=Loại xác thực auths.auth_name=Tên đăng nhập xác thực @@ -1168,20 +1172,20 @@ auths.github_api_endpoint=API Endpoint config.not_set=(chưa đặt) config.server_config=Cấu hình server -config.brand_name=Brand name +config.brand_name=Tên nhánh config.run_user=Người dùng đang chạy config.run_mode=Chế độ đang chạy -config.server.external_url=External URL +config.server.external_url=URL bên ngoài config.server.domain=Domain -config.server.protocol=Protocol -config.server.http_addr=HTTP address -config.server.http_port=HTTP port -config.server.cert_file=Certificate file +config.server.protocol=Giao thức +config.server.http_addr=Địa chỉ HTTP +config.server.http_port=Cổng HTTP +config.server.cert_file=Tập tin Chứng thư config.server.key_file=Key file config.server.tls_min_version=Minimum TLS version config.server.unix_socket_permission=Unix socket permission -config.server.local_root_url=Local root URL -config.server.offline_mode=Offline mode +config.server.local_root_url=URL gốc nội bộ +config.server.offline_mode=Chế độ ngoại tuyến config.server.disable_router_log=Disable router log config.server.enable_gzip=Enable Gzip config.server.app_data_path=Application data path @@ -1189,7 +1193,7 @@ config.server.load_assets_from_disk=Load assets from disk config.server.landing_url=Landing URL config.ssh_config=Cấu hình SSH -config.ssh.enabled=Enabled +config.ssh.enabled=Đã bật config.ssh.domain=Exposed domain config.ssh.port=Exposed port config.ssh.root_path=Root path @@ -1202,6 +1206,7 @@ config.ssh.start_builtin_server=Start builtin server config.ssh.listen_host=Listen host config.ssh.listen_port=Listen port config.ssh.server_ciphers=Server ciphers +config.ssh.server_macs=Server MACs config.repo_config=Cấu hình kho config.repo.root_path=Root path @@ -1210,7 +1215,7 @@ config.repo.ansi_chatset=ANSI charset config.repo.force_private=Force private config.repo.max_creation_limit=Max creation limit config.repo.preferred_licenses=Preferred licenses -config.repo.disable_http_git=Disable HTTP Git +config.repo.disable_http_git=Vô hiệu hóa HTTP Git config.repo.enable_local_path_migration=Enable local path migration config.repo.enable_raw_file_render_mode=Enable raw file render mode config.repo.commits_fetch_concurrency=Commits fetch concurrency @@ -1226,11 +1231,13 @@ config.db_config=Cấu hình Cơ sỡ dữ liệu config.db.type=Type config.db.host=Host config.db.name=Name +config.db.schema=Schema +config.db.schema_helper=(for "postgres" only) config.db.user=User config.db.ssl_mode=SSL mode config.db.ssl_mode_helper=(for "postgres" only) -config.db.path=Path -config.db.path_helper=(for "sqlite3"only) +config.db.path=Đường dẫn +config.db.path_helper=(chỉ cho phép "sqlite3") config.db.max_open_conns=Maximum open connections config.db.max_idle_conns=Maximum idle connections @@ -1242,31 +1249,32 @@ config.security.cookie_secure=Enable secure cookie config.security.reverse_proxy_auth_user=Reverse proxy authentication header config.security.enable_login_status_cookie=Enable login status cookie config.security.login_status_cookie_name=Login status cookie +config.security.local_network_allowlist=Local network allowlist -config.email_config=Email configuration -config.email.enabled=Enabled -config.email.subject_prefix=Subject prefix +config.email_config=Cấu hình Email +config.email.enabled=Đã bật +config.email.subject_prefix=Subject Prefix config.email.host=Host -config.email.from=From +config.email.from=Từ config.email.user=User -config.email.disable_helo=Disable HELO -config.email.helo_hostname=HELO hostname -config.email.skip_verify=Skip certificate verify -config.email.use_certificate=Use custom certificate -config.email.cert_file=Certificate file +config.email.disable_helo=Vô hiệu hoá HELO +config.email.helo_hostname=Tên máy chủ HELO +config.email.skip_verify=Bỏ qua xác thực chứng thư +config.email.use_certificate=Sử dụng chứng thư tự tạo +config.email.cert_file=Tập tin Chứng thư config.email.key_file=Key file -config.email.use_plain_text=Use plain text -config.email.add_plain_text_alt=Add plain text alternative -config.email.send_test_mail=Send test email -config.email.test_mail_failed=Failed to send test email to '%s': %v -config.email.test_mail_sent=Test email has been sent to '%s'. +config.email.use_plain_text=Dùng text +config.email.add_plain_text_alt=Thêm text thay thế +config.email.send_test_mail=Gửi Kiểm Tra Email +config.email.test_mail_failed=Gửi email kiểm tra đến '%s':%v thất bại +config.email.test_mail_sent=Email kiểm tra đã được gửi đến '%s'. -config.auth_config=Authentication configuration +config.auth_config=Cấu hình xác thực config.auth.activate_code_lives=Activate code lives config.auth.reset_password_code_lives=Reset password code lives -config.auth.require_email_confirm=Require email confirmation -config.auth.require_sign_in_view=Require sign in view -config.auth.disable_registration=Disable registration +config.auth.require_email_confirm=Yêu cầu xác nhận email +config.auth.require_sign_in_view=Yêu cầu đăng nhập để xem +config.auth.disable_registration=Vô hiệu hóa đăng ký config.auth.enable_registration_captcha=Enable registration captcha config.auth.enable_reverse_proxy_authentication=Enable reverse proxy authentication config.auth.enable_reverse_proxy_auto_registration=Enable reverse proxy auto registration @@ -1279,7 +1287,7 @@ config.session_config=Cấu hình session config.session.provider=Provider config.session.provider_config=Provider config config.session.cookie_name=Cookie -config.session.https_only=HTTPS only +config.session.https_only=Chỉ HTTPS config.session.gc_interval=GC interval config.session.max_life_time=Max life time config.session.csrf_cookie_name=CSRF cookie @@ -1293,46 +1301,46 @@ config.http_config=Cấu hình HTTP config.http.access_control_allow_origin=Access control allow origin config.attachment_config=Attachment configuration -config.attachment.enabled=Enabled -config.attachment.path=Path +config.attachment.enabled=Đã bật +config.attachment.path=Đường dẫn config.attachment.allowed_types=Allowed types -config.attachment.max_size=Size limit -config.attachment.max_files=Files limit +config.attachment.max_size=Giới hạn kích thước +config.attachment.max_files=Giới hạn số lượng tệp tin config.release_config=Release configuration -config.release.attachment.enabled=Attachment enabled -config.release.attachment.allowed_types=Attachment allowed types -config.release.attachment.max_size=Attachment size limit -config.release.attachment.max_files=Attachment files limit +config.release.attachment.enabled=Cho phép tệp đính kèm +config.release.attachment.allowed_types=Loại tệp tin đính kèm +config.release.attachment.max_size=Giới hạn dung lượng đính kèm +config.release.attachment.max_files=Giới hạn số lượng tệp đính kèm config.picture_config=Cấu hình ảnh -config.picture.avatar_upload_path=User avatar upload path -config.picture.repo_avatar_upload_path=Repository avatar upload path -config.picture.gravatar_source=Gravatar source -config.picture.disable_gravatar=Disable Gravatar -config.picture.enable_federated_avatar=Enable federated avatars +config.picture.avatar_upload_path=Đường dẫn tệp Ảnh đại diện +config.picture.repo_avatar_upload_path=Đường dẫn tệp Ảnh đại diện kho +config.picture.gravatar_source=Nguồn Gravatar +config.picture.disable_gravatar=Vô hiệu hóa Gravatar +config.picture.enable_federated_avatar=Bật Federated Avatars config.mirror_config=Mirror configuration config.mirror.default_interval=Default interval config.webhook_config=Cấu hình Webhook -config.webhook.types=Types -config.webhook.deliver_timeout=Deliver timeout -config.webhook.skip_tls_verify=Skip TLS verify +config.webhook.types=Kiểu +config.webhook.deliver_timeout=Thời gian chờ phân phối +config.webhook.skip_tls_verify=Bỏ qua xác thực TLS config.git_config=Cấu hình Git config.git.disable_diff_highlight=Disable diff syntax highlight config.git.max_diff_lines=Diff lines limit (for a single file) config.git.max_diff_line_characters=Diff characters limit (for a single line) config.git.max_diff_files=Diff files limit (for a single diff) -config.git.gc_args=GC arguments -config.git.migrate_timeout=Migration timeout -config.git.mirror_timeout=Mirror fetch timeout -config.git.clone_timeout=Clone timeout -config.git.pull_timeout=Pull timeout +config.git.gc_args=Các tham số GC +config.git.migrate_timeout=Thời gian chờ Migration +config.git.mirror_timeout=Thời gian chờ Mirror fetch +config.git.clone_timeout=Thời gian chờ Clone +config.git.pull_timeout=Thời gian chờ kéo config.git.gc_timeout=GC timeout -config.lfs_config=LFS configuration +config.lfs_config=Cấu hình LFS config.lfs.storage=Storage config.lfs.objects_path=Objects path @@ -1385,9 +1393,9 @@ delete_branch=xóa chi nhánh %[2]s tại %[3]s push_tag=đã đẩy thẻ tag %[2]s đến %[3]s delete_tag=đã xóa thẻ tag %[2]s tại %[3]s fork_repo=đã fork một kho lưu trữ đến %s -mirror_sync_push=synced commits to %[3]s at %[4]s from mirror -mirror_sync_create=synced new reference %[2]s to %[3]s from mirror -mirror_sync_delete=synced and deleted reference %[2]s at %[3]s from mirror +mirror_sync_push=đồng bộ commits đến %[3]s tại %[4]s từ mirror +mirror_sync_create=đồng bộ tham chiếu mới %[2]s đến %[3]s từ mirror +mirror_sync_delete=đồng bộ và xóa tham chiếu %[2]s tại %[3]s từ mirror [tool] ago=cách đây @@ -1409,7 +1417,7 @@ months=%d tháng trước %s years=%d năm trước %s raw_seconds=giây raw_minutes=phút -raw_hours=hours +raw_hours=giờ [dropzone] default_message=Thả các tập tin ở đây hoặc bấm vào để tải lên. diff --git a/conf/locale/locale_zh-CN.ini b/conf/locale/locale_zh-CN.ini index 74b8bd70c..db5dce2cb 100644 --- a/conf/locale/locale_zh-CN.ini +++ b/conf/locale/locale_zh-CN.ini @@ -51,13 +51,14 @@ internal_server_error=内部服务器错误 install=安装页面 title=首次运行安装程序 docker_helper=如果您正在使用 Docker 容器运行 Gogs，请务必先仔细阅读 官方文档 后再对本页面进行填写。 -requite_db_desc=Gogs 要求安装 MySQL、PostgreSQL、SQLite3、MSSQL 或 TiDB。 +requite_db_desc=Gogs 需要使用 MySQL、PostgreSQL、SQLite3 或 TiDB（MySQL 协议）数据库 db_title=数据库设置 db_type=数据库类型 host=数据库主机 user=数据库用户 password=数据库用户密码 db_name=数据库名称 +db_schema=模式 db_helper=如果您使用 MySQL，请使用 INNODB 引擎以及 utf8_general_ci 字符集。 ssl_mode=SSL 模式 path=数据库文件路径 @@ -399,7 +400,9 @@ owner=拥有者 repo_name=仓库名称 repo_name_helper=伟大的仓库名称一般都较短、令人深刻并且 独一无二 的。 visibility=可见性 +unlisted=列表隐藏 visiblity_helper=该仓库为 私有的 +unlisted_helper=该仓库 不会 在列表视图中展示 visiblity_helper_forced=网站管理员已强制要求所有新建仓库必须为 私有的 visiblity_fork_helper=（修改该值将会影响到所有派生仓库） clone_helper=不知道如何操作？访问 此处 查看帮助！ @@ -440,6 +443,7 @@ migrate.clone_address_desc=该地址可以是 HTTP/HTTPS/GIT 类型的 URL。 migrate.clone_address_desc_import_local=您被允许使用服务器本地路径作为仓库的远程地址进行迁移。 migrate.permission_denied=您没有获得导入本地仓库的权限。 migrate.invalid_local_path=无效的本地路径，不存在或不是一个目录！ +migrate.clone_address_resolved_to_blocked_local_address=克隆地址被解析到默认禁用的本地网络地址。 migrate.failed=迁移失败：%v mirror_from=镜像自地址 @@ -806,7 +810,7 @@ settings.webhook.headers=头信息 settings.webhook.payload=推送内容 settings.webhook.body=响应体 settings.webhook.err_cannot_parse_payload_url=无法解析推送 URL：%v -settings.webhook.err_cannot_use_local_addresses=非管理员不允许使用本地地址 +settings.webhook.url_resolved_to_blocked_local_address=推送 URL 被解析到默认禁用的本地网络地址。 settings.githooks_desc=Git 钩子是由 Git 本身提供的功能，以下为 Gogs 所支持的钩子列表。 settings.githook_edit_desc=如果钩子未启动，则会显示样例文件中的内容。如果想要删除某个钩子，则提交空白文本即可。 settings.githook_name=钩子名称 @@ -1203,6 +1207,7 @@ config.ssh.start_builtin_server=启动内置服务器 config.ssh.listen_host=监听主机 config.ssh.listen_port=监听端口 config.ssh.server_ciphers=服务端加密套件 +config.ssh.server_macs=服务器 MAC 地址 config.repo_config=仓库配置 config.repo.root_path=根目录 @@ -1227,6 +1232,8 @@ config.db_config=数据库配置 config.db.type=类型 config.db.host=主机 config.db.name=名称 +config.db.schema=模式 +config.db.schema_helper=（仅适用 "postgres"） config.db.user=用户 config.db.ssl_mode=SSL 模式 config.db.ssl_mode_helper=（仅限 "postgres" 使用） @@ -1243,6 +1250,7 @@ config.security.cookie_secure=启用安全的 Cookie config.security.reverse_proxy_auth_user=反向代理认证 Header config.security.enable_login_status_cookie=启用登录状态 Cookie config.security.login_status_cookie_name=登录状态 Cookie +config.security.local_network_allowlist=本地网络白名单 config.email_config=邮件配置 config.email.enabled=启用 diff --git a/conf/locale/locale_zh-HK.ini b/conf/locale/locale_zh-HK.ini index 43fa2be94..ca433b4b2 100644 --- a/conf/locale/locale_zh-HK.ini +++ b/conf/locale/locale_zh-HK.ini @@ -51,13 +51,14 @@ internal_server_error=Internal Server Error install=安裝頁面 title=首次安裝步驟 docker_helper=如果您正在使用 Docker 容器運行 Gogs，請務必先仔細閱讀 官方文檔 後再對本頁面進行填寫。 -requite_db_desc=Gogs requires MySQL, PostgreSQL, SQLite3, MSSQL or TiDB. +requite_db_desc=Gogs requires MySQL, PostgreSQL, SQLite3 or TiDB (via MySQL protocol). db_title=數據庫設置 db_type=資料庫類型 host=主機 user=帳號 password=密碼 db_name=資料庫名稱 +db_schema=Schema db_helper=如果您使用 MySQL，請使用 INNODB 引擎以及 utf8_general_ci 字符集。 ssl_mode=SSL 模式 path=數據庫文件路徑 @@ -399,7 +400,9 @@ owner=擁有者 repo_name=倉庫名稱 repo_name_helper=偉大的倉庫名稱一般都較短、令人深刻並且 獨一無二 的。 visibility=可見度 +unlisted=Unlisted visiblity_helper=該倉庫為 私有的 +unlisted_helper=This repository is Unlisted visiblity_helper_forced=網站管理員已強制要求所有新建倉庫必須為 私有的 visiblity_fork_helper=（修改該值將會影響到所有派生倉庫） clone_helper=不知道如何操作？訪問 帮助説明 ！ @@ -440,6 +443,7 @@ migrate.clone_address_desc=This can be a HTTP/HTTPS/GIT URL. migrate.clone_address_desc_import_local=You're also allowed to migrate a repository by local server path. migrate.permission_denied=您並沒有導入本地倉庫的權限。 migrate.invalid_local_path=無效的本地路徑，該路徑不存在或不是一個目錄！ +migrate.clone_address_resolved_to_blocked_local_address=Clone address resolved to a local network address that is implicitly blocked. migrate.failed=遷移失敗：%v mirror_from=镜像来自 @@ -806,7 +810,7 @@ settings.webhook.headers=標題 settings.webhook.payload=推送內容 settings.webhook.body=響應內容 settings.webhook.err_cannot_parse_payload_url=Cannot parse payload URL: %v -settings.webhook.err_cannot_use_local_addresses=Non admins are not allowed to use local addresses. +settings.webhook.url_resolved_to_blocked_local_address=Payload URL resolved to a local network address that is implicitly blocked. settings.githooks_desc=Git 鉤子是由 Git 本身提供的功能，以下為 Gogs 所支持的鉤子列表。 settings.githook_edit_desc=如果鉤子未啟動，則會顯示樣例文件中的內容。如果想要刪除某個鉤子，則提交空白文本即可。 settings.githook_name=鉤子名稱 @@ -1202,6 +1206,7 @@ config.ssh.start_builtin_server=Start builtin server config.ssh.listen_host=Listen host config.ssh.listen_port=Listen port config.ssh.server_ciphers=Server ciphers +config.ssh.server_macs=Server MACs config.repo_config=Repository configuration config.repo.root_path=Root path @@ -1226,6 +1231,8 @@ config.db_config=數據庫配置 config.db.type=Type config.db.host=Host config.db.name=Name +config.db.schema=Schema +config.db.schema_helper=(for "postgres" only) config.db.user=User config.db.ssl_mode=SSL mode config.db.ssl_mode_helper=(for "postgres" only) @@ -1242,6 +1249,7 @@ config.security.cookie_secure=Enable secure cookie config.security.reverse_proxy_auth_user=Reverse proxy authentication header config.security.enable_login_status_cookie=Enable login status cookie config.security.login_status_cookie_name=Login status cookie +config.security.local_network_allowlist=Local network allowlist config.email_config=Email configuration config.email.enabled=Enabled diff --git a/conf/locale/locale_zh-TW.ini b/conf/locale/locale_zh-TW.ini index 4de0e0138..a93aee203 100644 --- a/conf/locale/locale_zh-TW.ini +++ b/conf/locale/locale_zh-TW.ini @@ -44,20 +44,21 @@ issues=問題 cancel=取消 [status] -page_not_found=Page Not Found -internal_server_error=Internal Server Error +page_not_found=找不到頁面 +internal_server_error=內部伺服器錯誤 [install] install=安裝頁面 title=首次安裝步驟 docker_helper=如果您正在使用 Docker 容器運行 Gogs，請務必先仔細閱讀 官方文檔 後再對本頁面進行填寫。 -requite_db_desc=Gogs 需要安裝 MySQL、PostgreSQL、SQLite3、MSSQL 或 TiDB 其中一項。 +requite_db_desc=Gogs requires MySQL, PostgreSQL, SQLite3 or TiDB (via MySQL protocol). db_title=資料庫設定 db_type=資料庫類型 host=主機 user=帳號 password=密碼 db_name=資料庫名稱 +db_schema=Schema db_helper=如果您使用 MySQL，請使用 INNODB 引擎以及 utf8_general_ci 字符集。 ssl_mode=SSL 模式 path=路徑 @@ -125,7 +126,7 @@ run_user_not_match=執行系統用戶非當前用戶：%s -> %s smtp_host_missing_port=SMTP 主機缺少位址中的埠。 invalid_smtp_from=SMTP 寄件者欄位無效﹔%v save_config_failed=設定儲存失敗：%v -init_failed=Failed to initialize application: %v +init_failed=軟體初始化失敗：%v invalid_admin_setting=管理員帳戶設置不正確：%v install_success=您好！我們很高興您選擇使用 Gogs，祝您使用愉快，代碼從此無 BUG！ invalid_log_root_path=日誌根目錄無效: %v @@ -263,7 +264,7 @@ following=關注中 follow=關注 unfollow=取消關注 -form.name_not_allowed=User name or pattern %q is not allowed. +form.name_not_allowed=用戶名不允許 %q 的格式。 [settings] profile=個人資訊 @@ -399,7 +400,9 @@ owner=擁有者 repo_name=倉庫名稱 repo_name_helper=偉大的倉庫名稱一般都較短、令人深刻並且 獨一無二 的。 visibility=可見度 +unlisted=Unlisted visiblity_helper=該倉庫為 私有的 +unlisted_helper=This repository is Unlisted visiblity_helper_forced=網站管理員已強制要求所有新建倉庫必須為 私有的 visiblity_fork_helper=（修改該值將會影響到所有派生倉庫） clone_helper=不知道如何操作？訪問 帮助説明 ！ @@ -440,6 +443,7 @@ migrate.clone_address_desc=該地址可以是 HTTP/HTTPS/GIT 類型的 URL。 migrate.clone_address_desc_import_local=您還可以用本地服務器路徑來遷移倉庫。 migrate.permission_denied=您並沒有導入本地倉庫的權限。 migrate.invalid_local_path=無效的本地路徑，該路徑不存在或不是一個目錄！ +migrate.clone_address_resolved_to_blocked_local_address=Clone address resolved to a local network address that is implicitly blocked. migrate.failed=遷移失敗：%v mirror_from=镜像来自 @@ -806,7 +810,7 @@ settings.webhook.headers=標題 settings.webhook.payload=推送內容 settings.webhook.body=響應內容 settings.webhook.err_cannot_parse_payload_url=Cannot parse payload URL: %v -settings.webhook.err_cannot_use_local_addresses=Non admins are not allowed to use local addresses. +settings.webhook.url_resolved_to_blocked_local_address=Payload URL resolved to a local network address that is implicitly blocked. settings.githooks_desc=Git 鉤子是由 Git 本身提供的功能，以下為 Gogs 所支持的鉤子列表。 settings.githook_edit_desc=如果鉤子未啟動，則會顯示樣例文件中的內容。如果想要刪除某個鉤子，則提交空白文本即可。 settings.githook_name=鉤子名稱 @@ -1006,11 +1010,11 @@ first_page=首頁 last_page=末頁 total=總計：%d -dashboard.build_info=Build Information -dashboard.app_ver=Application version -dashboard.git_version=Git version -dashboard.go_version=Go version -dashboard.build_time=Build time +dashboard.build_info=建置資訊 +dashboard.app_ver=程式版本 +dashboard.git_version=Git 版本 +dashboard.go_version=Go 版本 +dashboard.build_time=建置時間 dashboard.build_commit=Build commit dashboard.statistic=應用統計數據 dashboard.operations=管理員操作 @@ -1172,16 +1176,16 @@ config.brand_name=Brand name config.run_user=執行用戶 config.run_mode=執行模式 config.server.external_url=External URL -config.server.domain=Domain -config.server.protocol=Protocol +config.server.domain=網域 +config.server.protocol=協定 config.server.http_addr=HTTP address -config.server.http_port=HTTP port -config.server.cert_file=Certificate file +config.server.http_port=HTTP 埠 +config.server.cert_file=憑證檔案 config.server.key_file=Key file config.server.tls_min_version=Minimum TLS version config.server.unix_socket_permission=Unix socket permission config.server.local_root_url=Local root URL -config.server.offline_mode=Offline mode +config.server.offline_mode=離線模式 config.server.disable_router_log=Disable router log config.server.enable_gzip=Enable Gzip config.server.app_data_path=Application data path @@ -1192,7 +1196,7 @@ config.ssh_config=SSH 配置 config.ssh.enabled=Enabled config.ssh.domain=Exposed domain config.ssh.port=Exposed port -config.ssh.root_path=Root path +config.ssh.root_path=根路徑 config.ssh.keygen_path=Keygen path config.ssh.key_test_path=Key test path config.ssh.minimum_key_size_check=Minimum key size check @@ -1202,9 +1206,10 @@ config.ssh.start_builtin_server=Start builtin server config.ssh.listen_host=Listen host config.ssh.listen_port=Listen port config.ssh.server_ciphers=Server ciphers +config.ssh.server_macs=Server MACs config.repo_config=Repository 設定 -config.repo.root_path=Root path +config.repo.root_path=根路徑 config.repo.script_type=Script type config.repo.ansi_chatset=ANSI charset config.repo.force_private=Force private @@ -1216,25 +1221,27 @@ config.repo.enable_raw_file_render_mode=Enable raw file render mode config.repo.commits_fetch_concurrency=Commits fetch concurrency config.repo.editor.line_wrap_extensions=Editor line wrap extensions config.repo.editor.previewable_file_modes=Editor previewable file modes -config.repo.upload.enabled=Upload enabled +config.repo.upload.enabled=允許上傳 config.repo.upload.temp_path=Upload temporary path config.repo.upload.allowed_types=Upload allowed types -config.repo.upload.file_max_size=Upload file size limit +config.repo.upload.file_max_size=上傳檔案大小限制 config.repo.upload.max_files=Upload files limit config.db_config=資料庫設定 config.db.type=Type config.db.host=Host config.db.name=Name -config.db.user=User -config.db.ssl_mode=SSL mode -config.db.ssl_mode_helper=(for "postgres" only) -config.db.path=Path -config.db.path_helper=(for "sqlite3"only) -config.db.max_open_conns=Maximum open connections -config.db.max_idle_conns=Maximum idle connections +config.db.schema=Schema +config.db.schema_helper=(for "postgres" only) +config.db.user=使用者 +config.db.ssl_mode=SSL 模式 +config.db.ssl_mode_helper=（僅限 "postgres" 使用） +config.db.path=路徑 +config.db.path_helper=（僅限 "sqlite3" 使用） +config.db.max_open_conns=最大開啟連接數 +config.db.max_idle_conns=最大閒置連線數 -config.security_config=Security configuration +config.security_config=安全性設定 config.security.login_remember_days=Login remember days config.security.cookie_remember_name=Remember cookie config.security.cookie_username=Username cookie @@ -1242,24 +1249,25 @@ config.security.cookie_secure=Enable secure cookie config.security.reverse_proxy_auth_user=Reverse proxy authentication header config.security.enable_login_status_cookie=Enable login status cookie config.security.login_status_cookie_name=Login status cookie +config.security.local_network_allowlist=Local network allowlist -config.email_config=Email configuration -config.email.enabled=Enabled +config.email_config=Email設定 +config.email.enabled=已啟用 config.email.subject_prefix=Subject prefix -config.email.host=Host +config.email.host=主機 config.email.from=From config.email.user=User config.email.disable_helo=Disable HELO config.email.helo_hostname=HELO hostname -config.email.skip_verify=Skip certificate verify -config.email.use_certificate=Use custom certificate -config.email.cert_file=Certificate file -config.email.key_file=Key file -config.email.use_plain_text=Use plain text +config.email.skip_verify=略過憑證驗証 +config.email.use_certificate=使用自定憑證 +config.email.cert_file=憑證檔案 +config.email.key_file=金錀檔案 +config.email.use_plain_text=使用純文字 config.email.add_plain_text_alt=Add plain text alternative -config.email.send_test_mail=Send test email -config.email.test_mail_failed=Failed to send test email to '%s': %v -config.email.test_mail_sent=Test email has been sent to '%s'. +config.email.send_test_mail=發送測試電子郵件 +config.email.test_mail_failed=發送測試郵件至 '%s' 時失敗：%v +config.email.test_mail_sent=測試電子郵件已發送到 '%s'。 config.auth_config=Authentication configuration config.auth.activate_code_lives=Activate code lives