From 5b0f6d11ad2826fe9fe8635fab8b16fb7880282b Mon Sep 17 00:00:00 2001 From: Horst Beham Date: Sat, 7 May 2016 12:39:25 +0200 Subject: [PATCH] Updated LG (markdown) --- LG.md | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/LG.md b/LG.md index 3062d20..7b4fd09 100644 --- a/LG.md +++ b/LG.md @@ -32,7 +32,14 @@ Good news is that LG re-enabled access to the In-Start menu with regular remote 2012 Series (CS, LM, LS, PM) --- -LG has completely removed end-user access to the In-Start menu from the standard remote control unit and phone apps and require you to use a special service remote control. So the only way to activate the In-Start menu on the 2012/2013 models is to use a *programmable remote control*, like a Logitech Harmony 300 or an On-For-All URC-3920. +With current firmware versions (May 2016), it is now possible to access the TV-Link-Loader menu with the standard remote control: +- press and hold _Settings_ +- wait until the menu disappears again +- quicky press "1105" + OK +- select "TV-Link-Loader" +- you can use up/down buttons to change the file name. The default 0001 is just fine. + +Older firmware versions required the use of a special service remote control. The only way to activate the In-Start menu on the 2012/2013 models was to use a *programmable remote control*, like a Logitech Harmony 300 or an On-For-All URC-3920. [Detailed instructions and other options](http://openlgtv.org.ru/wiki/index.php/Access_hidden_service_menus_/_modes) can be found on openlgtv.org.ru If you own a **Logitech Harmony**, add the device "LG 26LE5300-UE" to it. Models with a display show the *In-Start* button on page 5. On models without a display you'll have to assign the function to any of the standard buttons.