klipper

mirror of https://github.com/Klipper3d/klipper.git synced 2026-09-06 18:08:15 +02:00

Files

Kevin O'Connor f8b25a0104 docs: Update USB transfer benchmarks

It appears that the faster micro-controllers may have their transfer
speeds limited by the host USB controller.  Rerun the usb transfer
benchmarks using a high-speed hub.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

2019-09-06 13:07:08 -04:00

_layouts

docs: Fix markdown table layout in html rendering

2019-04-18 22:56:56 -04:00

img

skew_correction: add documentation

2019-06-26 20:16:35 -04:00

prints

…

_config.yml

docs: Fix inclusion of CONTRIBUTING.md in the automatic html generation

2019-04-18 23:10:32 -04:00

beaglebone.md

docs: Avoid using .. in markdown links

2019-04-14 21:12:21 -04:00

Bed_Level.md

docs: Minor wording change to Bed_Level.md

2019-05-23 19:31:44 -04:00

Benchmarks.md

docs: Update USB transfer benchmarks

2019-09-06 13:07:08 -04:00

BLTouch.md

docs: Improve bltouch v3 documentation

2019-05-26 11:09:32 -04:00

Bootloaders.md

docs: Add information on using OpenOCD to Bootloaders.md

2019-07-09 13:37:17 -04:00

CNAME

docs: Fixup github pages

2019-04-14 22:41:23 -04:00

Code_Overview.md

docs: Fix typo in Code_Overview.md

2019-08-09 00:13:34 -04:00

Command_Templates.md

docs: Add documentation for [delayed_gcode]

2019-07-01 11:09:30 -04:00

Config_Changes.md

dotstar: Initial support for "dotstar" LEDs

2019-08-06 19:44:32 -04:00

Config_checks.md

…

Contact.md

…

CONTRIBUTING.md

…

Debugging.md

docs: Add information on running the regression suite locally

2019-06-23 17:59:23 -04:00

Delta_Calibrate.md

docs: Update Delta_Calibrate.md with probe location bias info

2019-06-06 10:08:58 -04:00

developer-certificate-of-origin

…

Endstop_Phase.md

…

FAQ.md

docs: Update FAQ to reference Bootloaders.md on "make flash" failure

2019-07-22 10:07:34 -04:00

Features.md

docs: Add STM32F407 benchmarks to Features.md document

2019-09-05 22:42:48 -04:00

G-Codes.md

dotstar: Initial support for "dotstar" LEDs

2019-08-06 19:44:32 -04:00

Installation.md

docs: Recommend OctoPrint 1.3.11 or later

2019-05-20 23:01:04 -04:00

issue_template.md

…

Kinematics.md

…

Manual_Level.md

docs: Try to be more clear that the "paper test" steps need to be run

2019-05-24 22:44:00 -04:00

MCU_Commands.md

docs: Update MCU_Commands with schedule_soft_pwm_out changes

2019-08-01 00:23:09 -04:00

Overview.md

docs: Add skew_correction.md to Overview.md

2019-06-27 09:50:17 -04:00

Packaging.md

…

Pressure_Advance.md

…

Probe_Calibrate.md

docs: Update Probe_Calibrate.md with information on common probe errors

2019-06-06 10:08:58 -04:00

Protocol.md

docs: Update Protocol.md to use enumerations for pins

2019-07-09 14:17:28 -04:00

README.md

…

Releases.md

…

Sensorless_Homing.md

…

skew_correction.md

docs: Update for latest changs to skew_correction

2019-06-29 10:58:46 -04:00

Slicers.md

docs: Warn against using "PreloadVE" on KISSlicer

2019-06-23 12:18:24 -04:00

stm32f0_CAN.md

…

stm32f1.md

docs: Update stm32f1.md document

2019-08-05 11:40:05 -04:00

TSL1401CL_Filament_Width_Sensor.md

…

README.md

Welcome to the Klipper documentation. The overview document is a good starting point.