klipper

mirror of https://github.com/Klipper3d/klipper.git synced 2026-06-09 02:41:40 +02:00

Files

Kevin O'Connor bdd26e421b toolhead: Add a SET_VELOCITY_LIMIT command

Add a command to adjust the maximum velocity, acceleration, and
junction deviation parameters.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

2018-04-20 22:36:05 -04:00

img

docs: Try to make the klippy.log bug reporting more clear

2018-01-21 13:08:31 -05:00

prints

docs: Minor update to square.scad

2018-01-02 21:56:29 -05:00

beaglebone.md

docs: Note the use of the virtual_sdcard feature

2018-03-02 11:28:01 -05:00

Code_Overview.md

docs: Add a section on adding new host modules to Code_Overview.md

2018-03-28 13:12:41 -04:00

Config_checks.md

docs: Recommend running PID_CALIBRATE in Config_checks.md

2018-03-18 12:43:41 -04:00

Contact.md

docs: Try to make the klippy.log bug reporting more clear

2018-01-21 13:08:31 -05:00

CONTRIBUTING.md

docs: Add a CONTRIBUTING document

2017-12-24 12:33:01 -05:00

Debugging.md

docs: Update Debugging.md with information on logextract

2018-01-11 13:48:40 -05:00

developer-certificate-of-origin

docs: Add a CONTRIBUTING document

2017-12-24 12:33:01 -05:00

FAQ.md

docs: Add more hints to use /dev/by-id/ for the serial device

2018-04-20 11:57:49 -04:00

Features.md

docs: Add STM32F103 benchmarks to the Features document

2018-04-20 11:19:37 -04:00

G-Codes.md

toolhead: Add a SET_VELOCITY_LIMIT command

2018-04-20 22:36:05 -04:00

Installation.md

docs: Update installation document for OctoPrint 1.3.7

2018-04-09 11:39:36 -04:00

issue_template.md

docs: Add github issue template

2018-01-31 14:30:05 -05:00

Kinematics.md

toolhead: Permit look-ahead between Z moves

2017-09-03 15:46:48 -04:00

MCU_Commands.md

gpiocmds: Allow the start value for a pin to differ from the default_value

2017-10-12 11:59:27 -04:00

Overview.md

docs: Add a G-Codes.md file with the list of available commands

2018-03-08 14:11:20 -05:00

Pressure_Advance.md

docs: Note pressure_advance over 0.20 is unlikely to improve quality

2018-01-08 11:07:26 -05:00

Protocol.md

docs: Use only single space at start of new sentence

2017-05-01 11:58:32 -04:00

README.md

docs: Improve documentation for those starting in docs/

2017-04-27 16:05:26 -04:00

Releases.md

docs: Update release notes for v0.6.0 release

2018-03-31 14:04:39 -04:00

Todo.md

gcode: Add a SET_GCODE_OFFSET command

2018-04-20 20:04:41 -04:00

README.md

Welcome to the Klipper documentation. The overview document is a good starting point.