Arkadiusz Raj 28e41806f5 stm32: 25MHz clock fixes ...

Signed-off-by: Arkadiusz Raj <arek.raj@gmail.com>

2021-02-19 12:15:31 -05:00

..

adc.c

stm32: Support for STM32F401 (#3853)

2021-01-31 19:41:53 -05:00

can.c

stm32: Add STM32F429 variant (#3926)

2021-02-18 20:12:32 -05:00

chipid.c

stm32: Enable chipid as usb serial number

2019-11-25 19:30:31 -05:00

gpio.c

stm32: Define PGx pins on stm32f103

2019-11-02 11:35:27 -04:00

gpio.h

stm32: Add support for SPI1 and SPI3 busses

2019-08-31 19:55:30 -04:00

i2c.c

stm32: add support for i2c read

2020-05-05 11:44:19 -04:00

internal.h

stm32: Initial support for stm32f2 (#3001)

2020-06-23 10:52:15 -04:00

Kconfig

stm32: F429 shall use 168Mhz to allow easy USB clock configuration

2021-02-19 12:14:19 -05:00

Makefile

canbus: Move high-level CAN code to new src/generic/canbus.c

2021-02-02 15:24:11 -05:00

serial.c

stm32: Fix typo that broke selection of alternate serial port pin

2020-02-09 12:01:43 -05:00

spi.c

stm32: Add support for spi bus on stm32f407 pins PI2,PI3,PI1

2021-02-12 17:32:54 -05:00

stm32f0_adc.c

stm32: Support reading chip based temperature sensor on stm32f0

2020-10-29 11:55:06 -04:00

stm32f0_i2c.c

stm32f0: Initial support for i2c on stm32f0

2019-11-14 15:54:28 -05:00

stm32f0_serial.c

stm32: Adding support for STM32F031x6 (#3871)

2021-02-03 12:23:17 -05:00

stm32f0_timer.c

stm32: Initial support for stm32f070

2019-10-23 21:19:03 -04:00

stm32f0.c

stm32: Adding support for STM32F031x6 (#3871)

2021-02-03 12:23:17 -05:00

stm32f1.c

stm32f1: Fix for using 16MHz external crystal (#3814)

2021-01-24 10:24:11 -05:00

stm32f4.c

stm32: 25MHz clock fixes

2021-02-19 12:15:31 -05:00

usbfs.c

stm32: Initial support for stm32f070

2019-10-23 21:19:03 -04:00

usbotg.c

stm32: Wait for setup complete to enable ep0 rx in usbotg.c

2020-05-03 12:00:47 -04:00

watchdog.c

stm32: Rename stm32f4/ directory to stm32/

2019-08-05 11:25:40 -04:00